Transcript
MICRODEC485
TELEMETRY DATA MINI RECEIVER
• Small size • Microprocessor controlled • RS485 communication up to 1200 m
MICRODEC485 Telemetry receiver
SM82A
11 DCIR
TELEMETRY
MICRODEC485 is a mini digital control receiver managed by a microprocessor for the remote control of a pan and tilt head and motor-driven lenses. Designed to be installed inside camera housings, it ensures easier installation by reducing the number of connections and equipment (such as external boxes). All functions are ensured by the DCT, DCJ, DCTEL and DCIR keyboards and SM matrix range. The connection to the control unit is RS485 (connection distance up to 1200 m by twisted pair cable). Up to 32 receivers can be addressed. The feed voltage is 24V}. The MICRODEC485 can control Pan and Tilt heads in 24 V}, 50/60Hz and 12 V= lenses with polarity inversion (zoom and focus); it can be installed into HEB, HEC and HEG housings.
MICRODEC485 Telemetry receiver
DCIR
Twisted pair RS485 (max distance 1200 m) Twisted pair RS485 (max distance 1200 m) only telemetry Video-coax only Video and telemetry coax (max distance from matrix 350 m)
MODELS MICRODEC485
Rev. 02.04
Mini Telemetry receiver 8 functions RS485, 24VAC 50/60Hz
www.videotec.com
MICRODEC485
151
MICRODEC485
11
TELEMETRY DATA MINI RECEIVER 8 FUNCTIONS
RESET BUTTON
ADDRESS SELECTION DIP-SWITCH
TERMINAL BLOCK
TECHNICAL DATA GENERAL
COMMUNICATIONS
• 8 Functions: UP, DOWN, LEFT, RIGHT, ZOOM TELE, ZOOM WIDE, FOCUS NEAR, FOCUS FAR • 32 identification addresses, selectable by dip switch • Direct installation in HEG, HEB, HEC housings • Optoisolated digital logic and power section • 2 diagnostic LEDs • Supplied with: instruction manual, 1 support plate, 4 spacers, 2 attaching screws
• Selectable communication speed (1200/9600 Baud) • Serial input RS485 • Max Distance 1200 m (3900 ft) from Matrix Series SM or controller keyboard
MECHANICAL
Keyboards and Matrix: DCTEL, DCIR, DCJ, DCT and SM series matrix
• Dimensions: 100x60 mm (3.9x2.3 in)
P&T: PTH911, PTH311, IPT721, IPHS721, IPTS721
Housings: HEB-HEC, HEG
ELECTRICAL • Power • Power • Power • Power
RELATED PRODUCTS
supply: 24V~ 50/60Hz supplied to the positioning device: 24V~ 50/60Hz supplied to the lens: 12V 50mA (polarity inversion lenses) consumption: 1W
Retrofit on discontinued products: contact Videotec for further specifications.
ENVIRONMENT • Indoor • Operating temperature: 0-45°C (32°-113°F)
COMPLIANCE TO • CE in compliance with EN50081-1, EN50130-4, EN60065
Unit Weight (kg / lb): MICRODEC485: 0,3 / 0.6
152
Package Weight (kg / lb): MICRODEC485: 0,38 / 0.8
Package Dimensions (cm / in): MICRODEC485: 9,5x13x19,5 / 3.7x5.1x7.6
Master Carton (units): MICRODEC485:
VIDEOTEC ITALY: E-mail:
[email protected]
VIDEOTEC U.S.A.: E-mail:
[email protected]
VIDEOTEC FRANCE: E-mail:
[email protected]
VIDEOTEC HONG KONG: E-mail:
[email protected]
