Transcript
Passive Video Balun User Manual Model Number: NVA-P-100-CABLE
Introduction: A video balun allows you to send BNC video signal over a CAT5e cable. Depending on the balun, you are also able to send power through the CAT5e cable and convert the output to 12V before sending power to your camera. Making the set up easy, organized and efficient. This type of solution is great for small offices and homes at a great price due to cutting out expensive and heavy coaxial and power cables. All the CAT5e cables meet in the server room which is plugged into an included rack mount video balun which converts the signals back out to a BNC for you to connect to your output source, which in most common cases, a StandAlone DVR, a Linux-Based DVR, or a monitor. The power is sent from your server room to each camera. Eliminated the need for a power source at every camera end. 12V signals drop at about 300 ft. Supplying too much power to your camera will cause the camera to burn and not supplying enough, your camera will not power up. We stand behind our video baluns completely, we manufacture our own baluns and be reassured that we use only high quality materials ensuring our customers a satisfied, easy and safe setup. PI Manufacture carries several other video balun setups, in which some includes converters for longer distance setups.
Application Diagram:
Specification: General Detail Model Number Device Category Video Input/Output Connector Type
NVA-P-100-CABLE Passive BNC Male Terminal Block
Cable Required Maximum Distance
CAT5e, CAT6 1000ft 1 Pair Video (you can use up to 4 NVA-P-100-CABLE, optional)
Wire Dedication Power
Not Required N/A N/A
AC Adapter Requirement Input Power Output Power Dimension & Weight
N/A N/A
Dimensions (W x H x D) Weight Technical Specification
DC to 6.5MHz RL = 75 to 100: 0.4dB RL = 75 to 600: 0.4dB Coaxial: 75 ohm | UTP / Telephone Cable: 100/600 ohm
Frequency Response Attenuation Impedance Coaxial
unbalanced, 75 ohm
UTP CAT5e Telephone Cable
balanced twisted pair, 24 AWG, 100 ohm balanced twisted pair, 26-28 AWG, 600 ohm * Specification may change without prior notice.
Wire Dedication Chart: EIA / TIA -568B
L PT I
O
NA
L
8
O
O
PT I
O
NA
L NA O PT I O
4
-
BROWN
6
-
GREEN
ORAGNE
2
7
BROWN
-
+
BLUE
VIDEO
+
5
BLUE
+
3
GREEN
VIDEO
ORAGNE
1
Video Signal Chart: Video Balun
Distance
Video Balun
Passive Passive Active Active
up to 1000 feet up to 4000 feet up to 4000 feet up to 6000 feet
Passive Active Passive Active
Power Signal Chart: Output
Power Adapter @ 250 mA
CAT5e Cable
Power Cable
UTP 1 Pair
UTP 2 Pair
UTP 3 Pair
22 AWG
18 AWG
DC 18V
100 feet
300 feet
650 feet
1000 feet
1500 feet
AC 24V
300 feet
600 feet
1000 feet
1300 feet
1800 feet
AC/DC 48V
600 feet
1000 feet
1500 feet
2000 feet
2500 feet
Caution: This product is not waterproof and should only be used indoors.
For the most up to date specification and details, please visit us at www.pimfg.com.
