Transcript
Filmcity Video camera shoulder mount kit
1
Video Camera Shoulder Mount Kit (FC-102) INSTRUCTION M A N U A L
All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the publisher.
Filmcity Video camera shoulder mount kit
2
INTRODUCTION Our Filmcity shoulder mount kit FC-102 ensures smooth movements and professional results in every production environment. The combination of perfect balance, freedom of movement and rock solid steadiness is definitely what you can rely on. The 9" Camera Cage brackets with soft grip top handle enables the users in doing hand-held shooting without exhaustion. IN THE BOX Please inspect the contents of your shipped package to ensure you have received all that is pictured and listed below.
Straight & Z-Bracket
SR-33A Adapter
Matte Box MB-600
5x 300mm Female threaded Rods
9” Cage Brackets
1 x Handle Set
Front Handle Bracket
Camera Base with Quick Release
Top Handle
2x 200mm Female threaded Rods
2x 150mm Male threaded Rods
V1 Follow focus
Speed crank
Gear ring
Shoulder Pad
Accessories
Filmcity Video camera shoulder mount kit
3
ASSEMBLING YOUR MB-600 MATTE BOX
Insert the french flag in to the matte box and tighten the screws. Using the same approach, insert the side flags into the (big) slots provided in the hinges and secure with the screws.
Insert the Side flag to your matte box as shown below and then tighten the knob as shown below.
Wrap the knicker on conversion ring, then screw in the conversion ring on ring holder and tighten the screw to secure as shown.
Filmcity Video camera shoulder mount kit
4
Wrap the Flexible gear ring over your lens focusing ring. Tighten the gear properly with provided screw.
Insert the V1 follow focus on 15mm rods by loosening the side knobs, after mounting tighten the side knobs to secure properly. Adjust the Follow Focus lightly to make contact with the gear ring attached to the Camera. Adjust the Follow Focus horizontally according to your lens by marked Knob.
ASSEMBLING YOUR FC-102 KIT
Insert the 300mm female threaded rods into the camera base with quick release and tighten the bolt with the help of provided allen key to secure it properly.
Filmcity Video camera shoulder mount kit
Now attach the quick release of your fluid head with the camera base with quick release and tighten the bolt with screw driver.
Now mount it on fluid head and secure it properly by tightening the knob.
MOUNTING THE CAMERA
5
Loosen the ratchet knob and remove the quick release plate by pressing the quick release pin.
Filmcity Video camera shoulder mount kit
Attach the camera on quick release plate and tighten the bolt with screw driver.
6
Now mount the camera on the camera base and tighten the knob to Secure properly.
Insert the 9” cage brackets to back of rods and secure it with the help of provided knob.
Filmcity Video camera shoulder mount kit
Now, insert the 2x 200mm female threaded rods on the top of cage brackets in order to attach the top handle and secure.
7
Attach the straight bracket to the end of the rods and secure it properly with the help of provided knob.
Now insert the 300mm rods into the straight bracket and tighten the knob to secure.
Filmcity Video camera shoulder mount kit
8
Attach the shoulder pad and SR-33A adapter into the rods and secure it properly with the help of provided knob.
Now insert 9”camera cage to front of rods and secure with provided knobs.
Attach the 150mm male rods at the front to extend it for mounting your matte box, follow focus and handles.
Filmcity Video camera shoulder mount kit
9
Now attach the Matte Box to the front of rods, align the knicker with the lens barrel.
Note: you can also attach the matte box first before attaching the handle set.
Attach the front handle bracket with the rods and secure it properly with the help of allen key.
Now insert front handle rod into the front bracket and secure it properly with the help of knob.
Filmcity Video camera shoulder mount kit
Insert the handle secure.
10
into the rod and
YOUR FILMCITY VIDEO CAMERA SHOULDER MOUNT KIT (FC-102) ALL DRESSED UP AND GOOD TO GO
(SHOWN WITH OPTIONAL ACCESSORIES)
WARRANTY We offer a one year warranty for our products warranty from the date of purchase. We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual. Please note that we will not cover any shipping costs for returning the product to us. If any VAT or import duties are applied to the return, we will also charge these costs to the customer. The warranty does not include, by the way of example, damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product , or service by anyone other than our company.
Filmcity Video camera shoulder mount kit
11
We are not liable for incidental or consequential damages resulting from the use of the unit or occurring due to any breach of this warranty. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired. We will cover the complete cost of sending replacement parts within the warranty period. After that, Nominal cost of the product & Actual shipping cost will be charged. Do not send the unit to us without first getting a response and getting the approval to send back the item. In case of any kind of dissatisfaction, we urge you to Contact us immediately and we shall do our best to help you out. For any other assistance you can reach us via email.
