Transcript
VIDEO GRABBER CONVERTS YOUR OLD ANALOG VIDEO INTO DIGITAL FORMAT MT4169
User Manual
EN Introduction Thank you for buying this video capture device. Please take a moment and read this manual before using the device.
Select Install Driver Follow on-screen messages to finish installation, if “no windows logo” message appears – click “Continue Anyway”.
System requirements ¯ Processor Pentium4 2.8GHz or faster, ¯ RAM 512MB or more, ¯ Graphic card with DirectX9.0C support, ¯ USB2.0 interface, ¯ Windows XP/Vista/7
Installation Insert Software CD into CD-ROM drive, you will see following screen:
2
If following screen appear select “No, I will reboot my computer later”.
Now plug device to USB port, “Found New Hardware Wizard” will pop-up:
Now click Install Applications
EN
Follow on-screen messages to finish installation. Click “Next” to automatically search for driver.
Reboot your system. At first run of application enter key product (you can find it on the envelope of Software CD).
Click “Continue Anyway”. Click “Finish” to end installation. 3
Plug video source and press “Record” button to start video capturing. Press stop to save file.
EN
Go to “Edit” tab and drag icons from right panel at bottom panel. Between clips you can drag transition effects. 4
To burn project on CD/DVD go to “Burn” tab.
Go to “Capture” tab and click “Option”.
EN
Available options: ¯ Format: VCD, SVCD, DVD, Long DVD, WMV. ¯ Video Type: NTSC, PAL. ¯ Quality: Best, Good, Normal, Average. ¯ Split Size: 3.99GB, 4.38GB, 7.50GB.
5
EN
You can send captured video to YouTube directly, just configure this tab.
You can convert captured video to iPod supported video format.
Specification and appearance of product are subject to change without prior notice. For technical support please visit www.media-tech.eu.
6
