Transcript
3. Identification (1). Power LED (2). The 2-wire terminals for connecting to the main monitor (DR2) (3). BNC connector for external camera video input * Package contains no accessories. 1
2
3
EX-VIN
Video Input Converter 1. Function EX-VIN converts the video signal on the 2-wire transmission format of the HFX-700M and HFX-700R systems. Press the monitor button from any monitor of the system to see the video from doorbell camera connected on DR1 and then, press the monitor button again to scroll to see the CCTV camera connected to the EX-VIN on DR2. * CCTV camera connect to EX-VIN should have its own power source.
4. Wiring and setting (1). DR2 terminals on the main monitor (normally DR1 is for doorbell camera) (2). 2-wire terminals on the EX-VIN (3). BNC connection to the CCTV Camera (4). No other settings are required. * From main monitor to EX-VIN wiring distance: Maximum of 328 feet (100 meters) with AWG22 parallel wires.
3
PT1
2
PT2 DG1 DG2 OUT+ OUT-
2. Specification Power for EX-VIN : on the 2 wires from main monitor Operating temperature : -4℉~140℉, not intended for outdoor installation Measurement : 3.8"x2.5"x0.97" Housing : Metal
EX-VIN
DR2
1
DR1 <+> POWER <->
CCTV camera
Red Black
Main monitor wiring terminal (HFX-700M or HFX-700R)
