Transcript
VIDEO SPLITTER
Introduction Through the video splitter VS-812PF, VS-814PF, VS-818PF, VS-8116PF, you can use one PC to display identical image on 2,4,8,16 monitors or even more.
(VS-812PF) 25-0050
(VS-814PF) Ej lagervara
(VS-818PF) 25-0054
Video splitter is ideal for: Test bench facilities Data Center Help desk Video broadcasting: Presentation Stock quotes Timetables Educational facilities
VS-812PF / VS-814PF / VS-818PF / VS-8116PF Package Contents
1 Smart View VS-812PF or VS-814PF or VS-818PF or VS-8116PF Video Splitter 1 user manual 1 power adapter AC 7.5V 800mA for VS-812PF, 814PF, 818PF or 1 DC 7.5V 1.5A for VS-8116PF 2 rack rails, 8 screws for VS-8116PF only Any thing missed, please contact with your vendor.
Pin # 9 10 11 12 13 14 15
Signal NC Ground ID0 ID1 Horizontal Sync Vertical Sync ID3
With 400 MHz pixel frequency. Extends the video signal up to 65 meter (213”). Supports the DDC, DDC2, DDC2B. (For video out port 1) Can be cascaded. 1U rack design for VS-8116PF. The output is compatible with standard VGA card.
Function
USER MANUAL
Pin # Signal 1 Red video 2 Green video 3 Blue video 4 ID2 5 Ground 6 Analog Ground 7 Analog Ground 8 Analog Ground FRONT VIEW
Features
1. Power LED
REAR VIEW
Specifications (VS-8116PF) 25-0054
Technical Specifications Input/Output Signal
Video Input Connector (HD-15 Female) Video Output Connector (HD-15 Female)
Max. Resolution Pixel Frequency Cable Distance (Device to Monitor)
Signal Type Power Adapter (Min.) Housing Weight Dimensions (LxWxH)
VS-812PF
VS-814PF
VS-818PF VS-8116PF
1
1
1
1
2
4
8
16
2048 x 1536 60 Hz 400 MHz 65 m (213 ”) Max. VGA, SVGA, XGA, QXGA, UXGA, Multisync DC 7.5V AC 7.5V 800mA 1.5A Metal 420 g 455 g 680 g 1480 g 200x75 343x105 130x75x42 mm x42 mm x42 mm
-1-
1. Input Power Jack 2. “Video In” Port 3. “Video Out” Port *There are 2/4/8/16 out ports for VS-812PF/ VS-814PF / VS-818PF / VS-8116PF.
-2-
Installation 1. Turn off the PC and monitors. 2. Connect the HD-15 video extension cable between the PC and the “video in” port of splitter. 3. Connect the HD-15 video extension cables between the monitors and the “video out” ports of splitter. 4. Connect the power cord and turn on the splitter. 5. Turn on the PC and monitors. Note: If you install the DDC monitor for the splitter, the rest of monitors must be the same resolution as the DDC monitor. Available monitors include the VGA, SVGA, XGA, QXGA, UXGA, Multisync, and exclude the CGA, EGA, Mono.
P.S.: The example cascades the 4 and 8 ports splitters; however, you can cascade the video splitter with demanded port.
Operation for cascade: 1. The function to display identical image on more monitors, you request to attach another splitter. 2. Connect the HD-15 male/male video extension cable between the “video out” port of the former splitter and the “video in” port of the latter splitter. Note: Even though you are allowed to cascade the splitter with varied ports, the image might become unstable if cascade too many tiers of splitters.
-3-
e-mail:
[email protected] tel: 08-52 400 700 fax: 08-520 18121
-4-
