Preview only show first 10 pages with watermark. For full document please download

Videomic Go

   EMBED


Share

Transcript

VideoMic GO AUSTRALIA 107 Carnarvon st, Silverwater NSW 2128 Australia Ph: +61 2 9648 5855 Fx: +61 2 9648 2455 USA PO Box 91028, Long Beach CA 90809-1028 Ph: +1 562 364 7400 Fax: +1 888 412 4664 Lightweight On-Camera Microphone Specifications Features Acoustic Principle Line Gradient Directional Pattern Super-Cardioid • High quality directional microphone • o battery required N (powered by camera plug-in power - min 2.5V) • Integrated Rycote® Lyre® shock mounting Frequency Range 100Hz ~ 16,000Hz • Only 73gm (2.5oz) -35dB re 1V/Pa (17.8V @ 94dB SPL) ±2dB @ 1kHz • Rugged reinforced ABS construction Sensitivity • Windshield included 34dBA SPL (A - weighted per IEC651) • Equivalent Noise .5mm mini-jack output 3 (20cm cable included, extendable to 35cm) 60dB SPL (A - weighted per IEC651) • Integrated cold-shoe mount with 3/8” thread Signal/Noise • Designed and manufactured in Australia Dynamic Range 96dB (per IEC651) • Two year warranty Dimensions 167mm L x 79mm H x 70mm D Maximum SPL 120dB (@ 1kHz, 1% THD into 1kΩ load) Weight 73gm Power Req. Plug-in power required (330uA @ 2.5V) Output Connection 3.5mm TRS mini-jack (dual mono) Polar pattern 0˚ +5.0 0.0 -2.0 -4.0 -6.0 -8.0 -10.0 -12.0 -14.0 -16.0 -18.0 -20.0 -22.0 -24.0 Frequency response -2.0 -10.0 -20.0 90˚ -25.0 270˚ dB rel. 1V/Pa –– – Frequency: 500 Hz: 1000 Hz: 4000 Hz: 180˚