Transcript
Vierti single-touch dimmers and switches ®
2.75 in (70 mm) Product family features True multi-location dimming from each location
•
Touch LED bar to adjust light to suit any activity
•
On/off touch switch returns light to your favorite level
•
Audible feedback confirms user touch
•
LEDs indicate light level, even in a dark room
•
Programming allows customized functions
•
4.56 in (116 mm)
New Architectural wallplate opening
Line frequency compensation maintains stable light levels, despite power line frequency and voltage variations
•
Mechanical air-gap to disconnect load power
•
100% factory tested
•
Rugged components protect against damage due to line surges
•
Coordinating wallplate included with Architectural matte finish controls, metal wallplates only available separately
•
.30 in (7.6 mm) profile
Custom engraving and custom coloring available for wallplates, see pg. 155
•
Control types Shown actual size: Vierti dimmer in Black (BL) with White (WH) LED bar shown.
1-gang New Architectural wallplate in Satin Nickel (SN).
Single-pole (one location) ulti-location dimming M (up to five locations)
Direct load type compatibility
Incandescent/halogen dimming
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Load types requiring load interface Lighting load interfaces may be applicable for some load type, voltage and capacity combinations. For additional information, see pg. 174. www.lutron.com | 1.800.523.9466 |
14
New Architectural wallplate opening
Vierti single-touch dimmers and switches ®
Available finishes Use BOLD color code in model number (Example: VT-600-W-GR) Architectural matte finishes*
LED bar colors
WH White
LA Light Almond
AL Almond
BE Beige
B W G Blue White Green
IV Ivory
TP Taupe
GR Gray
SI Sienna
BR Brown
BL Black
SN Satin Nickel
QZ Antique Bronze
Architectural metal finish wallplates**
BN Bright Nickel
BC CLA SC Bright Chrome Clear Anodized Satin Chrome Aluminum
BB Bright Brass
BRA SB Brass Anodized Satin Brass Aluminum
QB BLA Antique Brass Black Anodized Aluminum
*Coordinating wallplate included with Architectural matte controls. **Metal finish wallplates only available separately and include black plastic trim/adapter, visible from side. Match with separate Black (BL) controls. For wallplate information, see pg. 148. www.lutron.com | 1.800.523.9466 |
15
New Architectural wallplate opening
Vierti single-touch dimmers and switches ®
Dimmers and switches
Companion dimmers and switches
Single-touch dimmers
Companion dimmers
Touch switch turns on/off
Use up to four companion dimmers with one Vierti multi-location dimmer
•
•
Touch LED bar to brighten and dim
•
Audible feedback confirms the LED bar was touched
•
Provides true dimming from each location
•
Allows multi-location dimming with Vierti companion dimmers
•
Use standard 3-way wiring for easy installation
•
Dimmer advanced programming options are available
•
Electronic switches
Companion switches
Touch switch turns on/off
Use up to four companion switches with one Vierti multi-location switch
•
•
Audible feedback confirms the LED bar was touched
•
Use standard 3-way wiring for easy installation
•
For multi-location switching use Vierti companion switches
•
Advanced programming options are available
•
Advanced programming features include: Setting the high-end/low-end trims (dimmers only)
•
Adjusting LED brightness (dimmers and switches)
•
Adjusting fade on/fade off time (dimmers only)
•
Audible feedback sound on/off (dimmers and switches)
•
Delayed fade wait time (dimmers only)
•
Locked preset lighting level (dimmers only)
•
Vierti advanced programming manual (Application Note #205) is available at www.lutron.com/applicationnotes. www.lutron.com | 1.800.523.9466 |
16
New Architectural wallplate opening
Vierti single-touch dimmers and switches ®
Connections overview Load connections*
Incandescent/ Halogen
Magnetic Low-Voltage
Electronic Low-Voltage
Fluorescent Lighting
MLV Transformer (by others)
ELV Transformer (by others)
Lutron ® Dimming Ballasts
ELV Dimmer
Fluorescent Dimmer
Incandescent/ Halogen/ MLV Dimmer
Control types (for 2 or more locations) Dim from multiple-locations (up to 5)
Lighting Load
MultiLocation Dimmer
Up to 4 Companion Dimmers
LED
Switched Lighting/Fans
Lutron Hi-lume ® LED Driver
Fluorescent Dimmer (3-wire only)
Switch
Switch from multiple-locations (up to 5)
Lighting Load
MultiLocation Switch
Up to 4 Companion Switches
For more information on ballasts, visit www.lutron.com/ballasts. For more information on LED drivers, visit www.lutron.com/LED. *For illustration purposes only. Consult model number pages for specific voltage and capacity information. www.lutron.com | 1.800.523.9466 |
17
New Architectural wallplate opening
Vierti single-touch dimmers and switches ®
Dimmer model numbers
Switch and companion control model numbers
Incandescent/halogen and/or Magnetic low-voltage dimmers
Switches*
Single-touch dimmer
Multi-location/single-pole 120 V 6 A light or 3 A fan 277 V 6 A light
Single-pole 120 V 600 W/VA
Single-touch electronic switch VT-600-D1-AA2
VT-600M-D1-AA2
Multi-location/single-pole 120 V 600 W/VA Multi-location/single-pole 120 V 1000 W/VA
VT-S6AMUNV-D1-AA2
Rated for: incandescent/halogen, magnetic low-voltage, electronic low-voltage, non-dim fluorescent ballasts, general purpose fans and most non-dim LED drivers.
VT-1000M-D1-AA2
For multi-location switching, use with Vierti multi-location companion switches VT-AS-D1-AA2.
The stated W (Watt) rating is the maximum incandescent lamp load. Ratings for MLV loads represent the maximum of the total lamp wattage plus MLV transformer loss (typically 20%).
Not for use with mechanical 3-way or 4-way switches.
Electronic low-voltage dimmers* Multi-location/single-pole 120 V 600 W
Companion controls
Single-touch dimmer
Single-touch companion dimmer
VTELV-600M-D1-AA2
120/277 V
Only certain LED drivers are dimmable using an ELV dimmer, for more information visit www.lutron.com/LED.
VT-AD-D1-AA2
No derating required if ganged. Single-touch companion switch 120 V
VT-AS-D1-AA2
No derating required if ganged.
3-wire fluorescent dimmers* Single-touch dimmer Multi-location/single-pole 120/277 V 6 A
VTF-6AM-D1-AA2
For use with Hi-lume®, Hi-lume® Compact SE, Hi-lume® 3D, Eco-10®, EcoSystem® ballasts. Adjustable high-end and low-end trim. Hi-lume® LED drivers: 3-wire fluorescent dimmers*
Single-touch dimmer Multi-location/single-pole 120/277 V 6 A
VTF-6AM-D1-AA2
Adjustable high-end and low-end trim.
D1: LED bar color codes, see pg. 15 AA2: Architectural matte color codes, see pg. 15 (1-gang wallplate included)
For more information on ballasts, visit www.lutron.com/ballasts. All models must be derated if ganged, unless otherwise noted, see pg. 170.
Exclusively compatible with Hi-lume LED driver.
For more information on Hi-lume LED drivers, visit www.lutron.com/HilumeLED.
*Requires neutral wire connection.
www.lutron.com | 1.800.523.9466 |
18
Vierti single-touch dimmers and switches ®
Accessories Wallplates
4.56 in (116 mm) Shown actual size: 2-gang New Architectural wallplate in White (WH). For more information about New Architectural wallplates, see pg. 148.
4.56 in (116 mm)
New Architectural wallplate opening
.30 in (7.6 mm) profile
Coordinated electrical devices For more information about coordinated Architectural electrical devices, see pg. 156.
Tamper resistant GFCI receptacle
Customizable 6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack 19
4.56 in (116 mm) Shown actual size: Vierti dimmers in a 2-gang New Architectural wallplate, all in White (WH).
4.56 in (116 mm)
Wallplates and accessories | New Architectural
.30 in (7.6 mm) profile
Product family features Can be used in conjunction with the following dimmer(s) and switch(es): Vierti®
•
All Lutron wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
•
New Architectural wallplates are aesthetically matched to Architectural accessories to complete the look of any room
•
Ganging and derating New Architectural wallplates use standard ganging
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging), see pg. 170
•
May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pg. 172
•
Customize your New Architectural wallplate with engraving, contact customer service to get started at 1.888.LUTRON1
•
Matte finish wallplates can be custom colored to perfectly match a paint color number, swatch or sample
•
www.lutron.com | 1.800.523.9466 |
148
Wallplates and accessories | New Architectural
Available finishes Use BOLD color code in model number (Example: VTW-1-GR) Architectural matte finishes
LED bar colors
WH White
LA Light Almond
AL Almond
BE Beige
B W G Blue White Green
IV Ivory
TP Taupe
GR Gray
SI Sienna
BR Brown
BL Black
SN Satin Nickel
QZ Antique Bronze
Architectural metal finishes*
BN Bright Nickel
BC CLA SC Bright Chrome Clear Anodized Satin Chrome Aluminum
BB Bright Brass
BRA SB Brass Anodized Satin Brass Aluminum
QB BLA Antique Brass Black Anodized Aluminum
*Metal finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) controls and accessories. www.lutron.com | 1.800.523.9466 |
149
Wallplates and accessories | New Architectural
Wallplates for Vierti® dimmers
1-gang* W: 2.75 in (70 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm)
VTW-1-AA1
3-gang* VTW-3-AA1 W: 6.32 in (161 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm)
2-gang* VTW-2-AA1 W: 4.56 in (116 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm)
4-gang* VTW-4-AA1 W: 8.45 in (215 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm)
Controls must have heat-sink fins broken for multi-gang installations. Multi-gang dimmer installations may require derating, see pg. 170.
AA1: Architectural matte and Architectural metal color codes, see pg. 149
www.lutron.com | 1.800.523.9466 |
*Metal finish wallplates include black plastic trim/ adapter, visible from side. Match with separate Black (BL) controls. 150
Wallplates and accessories | New Architectural
Custom Vierti wallplates**
LED bar color kits
Dimmer and designer receptacle Left side Vierti®/ right side receptacle*
VTW-VR-AA2-CPW0944
Right side Vierti/ left side receptacle*
VTW-RV-AA2-CPW0945
Multiple devices with line and low-voltage can be mounted behind a common wallplate using a standard barrier backbox. See Application Note #213 (Combining low-voltage and line voltage wiring devices in a multi-gang box) at www.lutron.com/applicationnotes.
For easy replacement of new color LED bar and/or wallplate
•
Wallplate included
•
No tools required
•
Color kit*
VT-CK-D-AA1
5-gang and 6-gang wallplates: 5-gang VTW-5-AA2-CPW0915 5-gang* VTW-5-AA3 W: 9.978 in (253 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm) 6-gang VTW-6-AA2-CPW0916 6-gang* VTW-6-AA3 W: 11.79 in (299 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm)
AA1: Architectural matte and Architectural metal color codes, see pg. 149 2 AA : Architectural matte color codes, see pg. 149 AA3: Architectural metal color codes, see pg. 149 D: LED bar color codes; Blue (B), White (W) and Green (G), see pg. 15
www.lutron.com | 1.800.523.9466 |
Multi-gang dimmer installations may require derating, see pg. 170.
*Metal finish wallplates include black plastic trim/ adapter, visible from side. Match with separate Black (BL) controls. **Contact customer service at 1.800.LUTRON1 to order or to inquire about additional custom configurations. 151
4.56 in (116 mm) Shown actual size: Nova Tb dimmers and 2-gang Architectural wallplate in White (WH).
4.56 in (116 mm)
Wallplates and accessories | Architectural
.30 in (7.6 mm) profile
Product family features Can be used in conjunction with the following dimmer(s) and switch(es): Vareo®, Nova Tb®
•
All Lutron® wallplates are screwless, seamless and have no visible hardware, the front plate securely snaps into the alignment adapter plate
•
Customize your architectural wallplate with engraving or by adding a corporate logo, contact customer service to get started at 1.888.LUTRON1
•
Matte finish wallplates can be custom colored to perfectly match a paint color number, swatch or sample
•
www.lutron.com | 1.800.523.9466 |
Ganging and derating Architectural wallplates in this section use standard ganging
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging), see pg. 170
•
May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pg. 173
•
Custom multi-gang wallplates required for the following cases -Full-capacity ganging ("No Fins Broken") -Large Nova Tb controls (1500/2000 W) -Nova controls For further information visit www.lutron.com/customganging. •
152
Wallplates and accessories | Architectural
Available finishes Use BOLD color code in model number (Example: VWP-1-SI) Architectural matte finishes
WH White
LA Light Almond
AL Almond
BE Beige
GR Gray
SI Sienna
BR Brown
BL Black
IV Ivory
TP Taupe
QZ Antique Bronze
Architectural metal finishes*
BN Bright Nickel
BC CLA SC Bright Chrome Clear Anodized Satin Chrome Aluminum
SN Satin Nickel
AU Gold Plated
BB Bright Brass
QB BLA Antique Brass Black Anodized Aluminum
BRA SB Brass Anodized Satin Brass Aluminum
*Metal finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls. www.lutron.com | 1.800.523.9466 |
153
Wallplates and accessories | Architectural
Wallplates for Vareo® and Nova Tb® dimmers and architectural accessories
1-gang for one switch or dimmer* W: 2.75 in (70 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm)
VWP-1-AA1
1-gang for one accessory* VWP-R-AA1 W: 2.75 in (70 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm)
2-gang* VWP-2-AA2 for two dimmers or switches W: 4.56 in (116 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm)
2-gang* VWP-2R-AA2 for two accessories W: 4.56 in (116 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm)
3-gang* VWP-3-AA2 for three switches or dimmers W: 6.32 in (161 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm)
4-gang* for four switches or dimmers
VWP-4-AA 2
W: 8.45 in (215 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm)
AA1: Architectural matte and Architectural metal color codes, see pg. 153 2 AA : Architectural matte color codes, see pg. 153 For metal finishes, contact Customer Service at 1.800.LUTRON1. www.lutron.com | 1.800.523.9466 |
Multi-gang dimmer installations may require derating, see pg. 170.
*Metal finish wallplates include black plastic trim/ adapter, visible from side. Match with separate Black (BL) controls. 154
Wallplates and accessories | Architectural
Custom Architectural wallplates Custom configurations, colors, engraving and silkscreenings available. Contact customer service 1.888.LUTRON1.
2-gang* VWP-2CR-AA2 for one dimmer or switch and one accessory W: 4.56 in (116 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm) 2-gang* VWP-2RC-AA2 for one accessory and one dimmer or switch W: 4.56 in (116 mm); H: 4.56 in (116 mm); D: .30 in (7.6 mm) Multiple devices with line and low-voltage can be mounted behind a common wallplate using a standard barrier backbox, see Application Note #213 (Combining Low-Voltage and Line Voltage Wiring Devices in a Multi-Gang Box) at www.lutron.com/applicationnotes.
Custom multi-gang wallplates required for the following cases: • Multi-gang metal finishes • Full-capacity ganging ("No Fins Broken") • Large Nova Tb controls (1500/2000 W) • Nova controls For further information, visit www.lutron.com/customganging.
4-5
0256 ve
Mau
4-4
urple
0256
tic P
Majes
4-3
0256 low
Lily G
Custom coloring available for all Architectural matte finish wallplates.
AA 2: Architectural matte color codes, see pg. 153 For metal finishes, contact Customer Service at 1.800.LUTRON1.
Multi-gang dimmer installations may require derating, see pg. 170.
Custom engraving available for all Traditional, Designer, Architectural and New Architectural style wallplates (except Stainless Steel). For wallplate engraving schedules, go to www.lutron.com/engraving.
*Metal finish wallplates include black plastic trim/ adapter, visible from side. Match with separate Black (BL) controls. www.lutron.com | 1.800.523.9466 |
155
Wallplates and accessories | Architectural
Cable jack
Double and triple telephone jacks F-style, 75-Ohm coaxial cable
8-conductor jack, RJ45 category 5 phone jack
•
•
Includes 1-gang wallplate
Includes 1-gang wallplate
•
Single cable jack*
NT-CJ-AA2
Telephone jack
•
Double telephone jack* †
NT-PJ8X2-AA2
Triple telephone jack* †
NT-PJ8X3-AA2
Telephone/cable jack
6-conductor jack, RJ11
•
Includes 1-gang wallplate
8-conductor jack, RJ45 category 5 phone jack
•
•
F-style, 75-Ohm coaxial cable jack
•
Includes 1-gang wallplate
•
Single telephone jack*
NT-PJ-AA2 Telephone/cable jack* †
NT-PJ8CJ-AA2
Multiple devices with line and low-voltage can be mounted behind a common wallplate using a standard barrier backbox, see Application Note #213 (Combining Low-Voltage and Line Voltage Wiring Devices in a Multi-Gang Box) at www.lutron.com/applicationnotes.
*Metal finishes are only available as separate wallplates. Match with separate Black (BL) controls and accessories. †Ivory, White, Beige and Taupe controls will ship with White coordinating jacks; Brown, Black, Gray and Metal finish controls will ship with Black coordinating jacks.
AA2: Architectural matte color codes, see pg. 153 (1-gang wallplate included)
www.lutron.com | 1.800.523.9466 |
156
Wallplates and accessories | Architectural
Isolated ground receptacles
Receptacles Includes 1-gang wallplate
Receptacle is orange for easy ID and circuit delineation
•
•
Wallplate will match color that is ordered
•
Includes 1-gang wallplate
•
Tamper resistant receptacles 15 A, 125 V*
NTR-15-TR-AA
20 A, 125 V*
NTR-20-TR-AA
2 2
15 A, 125 V*
NTR-15-IG-OR-AA2
20 A, 125 V*
NTR-20-IG-OR-AA2
GFCI receptacles Press test button to confirm LED indicator status
•
Press reset button to reset GFCI after circuit interruption
•
Includes 1-gang wallplate
•
Tamper resistant GFCI receptacles 15 A, 125 V*
NTR-15-GFTR-AA2
20 A, 125 V*
NTR-20-GFTR-AA2
AA : Architectural matte color codes, see pg. 153 (1-gang wallplate included) 2
www.lutron.com | 1.800.523.9466 |
*Metal finishes are only available as separate wallplates. Match with separate Black (BL) controls and accessories. 157
Wallplates and accessories | Architectural
Receptacles for dimming use
Receptacles for dimming use
Duplex for dimming both connected loads
Duplex for dimming both connected loads
•
•
Projecting nubs prevent standard plugs from being used
Projecting nubs prevent standard plugs from being used
•
•
Requires replacement plugs for dimming use
Requires replacement plugs for dimming use
•
•
15 A model shown
•
15 A model shown
Includes 1-gang wallplate
•
•
Includes 1-gang wallplate
•
Tamper resistant shutter mechanism
Duplex for dimming use
•
15 A
120/125 V*
NTR-15-DFDU-AA2
20 A
120/125 V*
NTR-20-DFDU-AA2
Receptacles for dimming use Top half for dimming
•
Projecting nub prevents standard plug from being used
•
Dual dimming tamper resistant 15 A
120/125 V*
NTR-15-DDTR-AA2
20 A
120/125 V*
NTR-20-DDTR-AA2
Receptacles for dimming use Top half for dimming
•
Projecting nub prevents standard plug from being used
Requires replacement plugs for dimming use
•
Bottom half is a general use receptacle and will fit standard duplex plugs
•
•
Requires replacement plugs for dimming use
•
Bottom half is a general use receptacle and will fit standard duplex plugs
•
15 A model shown
•
Includes 1-gang wallplate
•
15 A model shown
•
Split duplex (half for dimming use) 15 A
120/125 V*
NTR-15-HFDU-AA2
20 A
120/125 V*
NTR-20-HFDU-AA2
Includes 1-gang wallplate
•
Tamper resistant shutter mechanism
•
Half dimming tamper resistant 15 A
120/125 V*
NTR-15-HDTR-AA2
20 A
120/125 V*
NTR-20-HDTR-AA2
AA : Architectural matte color codes, see pg. 153 (1-gang wallplate included) 2
www.lutron.com | 1.800.523.9466 |
*Metal finishes are only available as separate wallplates. Match with separate Black (BL) controls and accessories. 158
Wallplates and accessories | Architectural
Replacement plugs for dimming (use with receptacles) This plug required for use with Lutron® receptacles for dimming use—plug will work in standard receptacle
•
Easily replaces the existing plugs on lamps
•
120/125 V White
RP-FDU-10-WH
120/125 V Brown
RP-FDU-10-BR
UL/CSA/NOM regulatory approvals
Important application notes: Receptacles and plugs for dimming use are UL listed for use with all Lutron wallbox dimmers included in this catalog
•
If there is only one electrical feed to the receptacle, then the duplex DFDU must be used
•
If the hot and dimmed hot feeds to the split duplex HFDU are supplied from different circuits or split-wired, with separate switch-legs, a means to simultaneously disconnect these circuits must be provided at the panel board where they originate (NEC 210.7(C) 2002 Edition). A 2-pole circuit breaker or two single-pole circuit breakers with an approved handle tie can be used to accomplish this simultaneous disconnect. Feedthrough dimming panels, which are those without breakers, are recommended when using the HFDU.
•
For detailed information, see Application Notes #91 (Guide to Dimming Table Lamps) and #109 (Guide to Dimming Portable Lamps via Receptacles) at www.lutron.com/applicationnotes
•
AA : Architectural matte color codes, see pg. 153 (1-gang wallplate included) 2
www.lutron.com | 1.800.523.9466 |
*Metal finishes are only available as separate wallplates. Match with separate Black (BL) controls and accessories. 158A
Wallplates and accessories | Architectural
Field customizable 6-port frame Shipped with six blanks in matching colors
•
Connectors sold separately
•
Connectors snap in (no tools required)
•
Includes 1-gang wallplate
Multiple devices with line and low-voltage can be mounted behind a common wallplate using a standard barrier backbox, see Application Note #213 (Combining Low-Voltage and Line Voltage Wiring Devices in a Multi-Gang Box) at www.lutron.com/applicationnotes.
•
Connectors available in White (WH) only unless noted
•
6-port frame*
NT-6PF-AA2
Connectors for 6-port frame
Telephone/network jacks
8-conductor, RJ45 category 3
CON-1P-C3-EE4
8-conductor, RJ45 category 5e
CON-1P-C5E-EE4
8-conductor, RJ45 category 6
CON-1P-C6-EE4
Fiber jacks
MT-RJ feed through
CON-1F-MTRJ-WH
SC simplex
CON-1F-SC-WH
LC non-flush mount
CON-1F-LC-WH
ST style
CON-1F-ST-WH
Cable jack
F-style, 75-Ohm coaxial cable
BNC jack
BNC connector, 50-Ohm
CON-1C-EE4
CON-1B-WH
Connectors only for use with 6-port frame.
AA : Architectural matte color codes, see pg. 153 EE 4: Only available in White (WH) and Black (BL) 2
www.lutron.com | 1.800.523.9466 |
*Metal finishes are only available as separate wallplates. Match with separate Black (BL) controls and accessories. 159
Appendix | Multi-ganging derating Appendix | Ganging andand derating How to understand ganging and derating Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
•
•
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging) May require derating (i.e., reduction of dimmer capacity due to fin removal), see Derating Tables, pgs. 172–173
Custom ganging for Architectural style controls For Architectural style dimmers and switches, it is possible to retain the maximum capacity of dimmers in multi-gang applications via custom architectural multi-gang: •
•
• •
•
May require customized, wider-thanstandard wallplates May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls Visit www.lutron.com/customganging for additional information
Standard ganging for dimmers, switches and accessories New Architectural
Architectural
Designer
Traditional
pg. 148
pg. 152
pg. 160
pg. 166
Vierti®
Vareo® Nova Tb®
Maestro® Maestro IR® Maestro Wireless® Spacer System® Diva® Lyneo® Lx Skylark® Skylark ContourTM
Abella® Ceana® Ariadni® Glyder® Rotary
Derating Table 1 pg. 172
Derating Table 2 pg. 173
Derating Table 1 pg. 172
Derating Table 1 pg. 172
www.lutron.com | 1.800.523.9466 |
170
Appendix | Ganging and derating
Standard ganging and fins broken derating examples:
=
+
No fins broken Full capacity
One Nova Tb® dimmer
=
Standard 1-gang backbox
+
=
Three Nova Tb dimmers “Fins Broken” ganging
Standard 1-gang architectural wallplate
+
Standard 2-gang backbox
One fin broken* Partial derating
Two Nova Tb dimmers “Fins Broken” ganging
+
+
Standard 2-gang architectural wallplate
+
Standard 3-gang backbox
Inside: Two fins broken* Full derating
Standard 3-gang architectural wallplate
Outside: One fin broken* Partial derating
Custom Architectural ganging example:
=
Two Nova Tb dimmers “No Fins Broken” ganging
+
+
No fins broken Full capacity
Backbox with chase nipple
Custom architectural wallplate
For further information on ganging and derating, visit www.lutron.com/multigang.
*The fins are scored and designed to be removed easily. www.lutron.com | 1.800.523.9466 |
171
Appendix | Multi-ganging derating Appendix | Ganging andand derating Derating Table 1 New Architectural | Vierti® Designer | Maestro®, Maestro IR®, Maestro Wireless®, Spacer System®, Diva®, Lyneo® Lx, Skylark ContourTM, Skylark® Traditional | Abella®, Ceana®, Ariadni®, Glyder®, Rotary
No fins broken
1 fin broken
2 fins broken
600 W
500 W
400 W
1000 W
800 W
650 W
300 W
250 W
200 W
300 W
250 W
200 W
600 VA / 450 W
500 VA / 400 W
400 VA / 300 W
1000 VA / 800 W
800 VA / 650 W
650 VA / 500 W
300 W
250 W
200 W
500 W 600 W
450 W 500 W
400 W 400 W
Incandescent Dimmers Dual dimmers Magnetic low-voltage Dimmers Electronic low-voltage Dimmers
Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vierti
60 ballasts / 6 A
50 ballasts / 5 A
35 ballasts / 3.5 A
Maestro /Spacer System
20 ballasts / 6 A
20 ballasts / 5 A
20 ballasts / 3.5 A
no derating
no derating
no derating
5 A
4 A
3.3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A
1.5 A
1.5 A
5 A
4 A
3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 360 W
1.5 A / 360 W
1.5 A / 360 W
2.5 A / 300 W
2.1 A / 250 W
1.7 A / 200 W
Vierti
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Maestro (light/fan)
8 A / 3 A
6.5 A / 3 A
5 A / 3 A
Abella (light/fan)
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Diva, Skylark, Lyneo Lx and Ariadni Tu-Wire®: Spacer System, Diva, Skylark Fan controls
Fully variable Fan/light controls
Fully variable Electronic switches
www.lutron.com | 1.800.523.9466 |
172
Appendix and derating Appendix| |Multi-ganging Ganging and derating Derating Table 2 Architectural | Vareo®, Nova Tb®
No fins broken
1 fin broken
2 fins broken
600 W
500 W
300 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
1950 W
–
–
600 VA / 450 W
500 VA / 400 W
300 VA / 250 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
300 W
300 W
250 W
600 W
500 W
400 W
20 ballasts / 8 A
20 ballasts / 6 A
20 ballasts / 4.5 A
6 A
no derating
no derating
8 A
no derating
no derating
16 A
no derating
no derating
30 mA ballasts
no derating
no derating
5 A
4 A
3.3 A
1.5 A
no derating
no derating
Fully variable
6 A
4.2 A
2.5 A
Fully variable
12 A
10 A
8.3 A
VETS-1000-
1000 W
800 W
650 W
VETS-1000-SL-
1000 W
900 W
700 W
VETN-1000-
1000 VA
700 VA
550 VA
Incandescent Dimmers
Magnetic low-voltage Dimmers
Electronic low-voltage Dimmers Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vareo Nova Tb
0-10 VDC control1 Tu-Wire® Fan controls Quiet 3-speed
Electronic tapswitches2
For further information on ganging Nova®, visit www.lutron.com/customganging.
PowerPack required for line voltage switching. VETS-R-Auxiliary electronic tapswitches do not require derating.
1 2
www.lutron.com | 1.800.523.9466 |
173
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Vierti®* pg. 14
capacity†
Incandescent/halogen 120 V
Magnetic low-voltage 120 V
Vareo® pg. 20
Nova Tb® Nova® pg. 34 pg. 26
Centurion® pg. 42
M
600 W
M
1000 W
M
1500 W
WBX
2000 W
WBX
600 VA (450 W) 1000 VA (800 W) 1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
WBX
WBX
WBX
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V Neon/cold cathode
WBX
WBX WBX WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE,
8 A
Eco-10® and EcoSystem® ballasts
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A
3F
Hi-lume, Hi-lume Compact SE,
8 A
3F
16 A
3F
5 A
PA
Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
16 A
TVI
3F
3F
TVI
T VI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions. *Consult Lutron Technical Support for information on interfaces with Vierti. † UL listed for FULL wattage indicated (derate capacity only if ganged with other devices). www.lutron.com | 1.800.523.9466 |
174
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Maestro® Maestro Maestro Spacer pg. 46 IR® pg. 60 Wireless® System® pg. 68 pg. 76
capacity†
M
600 W
E
Incandescent/halogen 120 V
M
M
Diva® pg. 86
M E
1000 W 1500 W
WBX
WBX
WBX
WBX
2000 W
WBX
WBX
WBX
WBX
1500 VA (1200 W)
WBX
WBX
WBX
WBX
2000 VA (1600 W)
WBX
WBX
WBX
WBX
600 VA (450 W)
WBX
WBX
WBX
WBX
1000 VA (800 W)
WBX
WBX
WBX
WBX
Magnetic low-voltage 120 V
600 VA (450 W) 1000 VA (800 W)
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W
WBX
450 W
WBX
WBX
600 W
WBX
WBX
16 A
WBX
Neon/cold cathode
WBX
WBX
WBX WBX
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10® and EcoSystem® ballasts
8 A
3F
3F
3F
16 A
3F
3F
3F
3F
8 A
3F
3F
3F
3F
16 A
3F
3F
3F
3F
5 A
PA
PA
16 A
TVI
TVI
TVI
TVI
3-wire ballasts and Hi-lume LED driver 277 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
T VI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
175
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Lyneo® Lx Skylark pg. 94 ContourTM pg.100
Skylark® pg. 104
Abella® pg. 114
capacity†
Incandescent/halogen 120 V
M
600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
WBX
2000 W
WBX
WBX
600 VA (450 W) 1000 VA (800 W)
WBX
1500 VA (1200 W)
WBX
WBX
2000 VA (1600 W)
WBX
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W 450 W
WBX
600 W
WBX
16 A
Neon/cold cathode
WBX
WBX
WBX
WBX
3F
3F
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10® and EcoSystem® ballasts
8 A 16 A
3-wire ballasts and Hi-lume LED driver 277 V 6 A Hi-lume, Hi-lume Compact SE,
8 A
3F
3F
Eco-10 and EcoSystem ballasts
16 A
3F
3F
5 A
PA
16 A
TVI
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
TVI
TVI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
176
Appendix | Lighting load interfaces Dimmer capabilities and interface requirements ulti-location—true dimming from each location M E eco-model available Compatible dimmer (no interface) WBX TVI 3F PA Requires interface, see notes below M
Dimmers
Ceana® pg. 120
Ariadni® pg. 124
Glyder® pg. 130
Rotary pg. 134
capacity†
Incandescent/halogen 120 V
600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
2000 W
WBX
600 VA (450 W) 1000 VA (800 W) 1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
1000 VA (800 W)
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
Magnetic low-voltage 277 V Electronic low-voltage 120 V
Electronic low-voltage 277 V Neon/cold cathode
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A Hi-lume, Hi-lume Compact SE,
8 A
Eco-10® and EcoSystem® ballasts
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A Hi-lume, Hi-lume Compact SE, Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V 0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module (PHPM-WBX-DV-WH) 3F: Fluorescent Power Module (PHPM-3F-DV-WH)
8 A
3F
16 A
3F
5 A
PA
16 A
TVI
TVI: 0-10 V Interface (GRX-TVI) PA: Phase Adaptive Power Module (PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
177
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility Incandescent, magnetic and electronic low-voltage (120/277 V)
3-wire Fluorescent ballasts or Hi-lume® LED drivers (120/277 V)
0-10 VDC Ballasts or LED drivers (120/277 V)
WBX
3F
TVI
Wallbox Phase Adaptive Power Module*
Fluorescent Power Module*
0-10 V Interface
PHPM-WBX-DV-WH
PHPM-3F-DV-WH
GRX-TVI
Dimmer Family
Singlepole
3-way or multi-location
Singlepole
3-way or multi-location
Singlepole
3-way or multi-location
Abella®
–
–
–
–
–
–
Ariadni®
–
AYF-103P-
–
AYF-103P-
–
AYF-103P-
Ceana®
–
–
–
–
–
–
–
DVF-103P-
–
DVF-103P-
–
DVF-103P-
–
DVSCF103P-
–
DVSCF103P-
–
DVSCF103P-
Glyder®
–
–
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
–
LXF-103PL-
–
LXF-103PL-
Diva® Gloss Diva Satin Colors®
Maestro® Gloss Maestro® Satin Colors® Maestro Wireless®
–
MAF-6AM-
–
MAF-6AM-
–
MAF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
Nova®
NF-10-
NF-103P-
NF-10-
NF-103P-
NF-10-
NF-103P-
Nova Tb®
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
Skylark®
SF-10P-
SF-103P-
SF-10P-
SF-103P-
SF-10P-
SF-103P-
Spacer System®
–
SPSF-6AM-
–
SPSF-6AM-
SPSF-S6A-
SPSF-6AM-
Vareo®
–
VF-10-
–
VF-10-
–
VF-10-
contact Lutron
–
VTF-6AM-
Vierti®
contact Lutron
Use only dimmer model numbers listed. * Dual 120/277 V model given,120 V only versions are also available. Please see Technical notes, pg. 179. www.lutron.com | 1.800.523.9466 |
178
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility Tu-Wire® Fluorescent Ballasts (120 V)
Switched Lighting (120/277 V)
PA
SW
Phase Adaptive Power Module*
Switching Power Module*
PHPM-PA-DV-WH
PHPM-SW-DV-WH
Dimmer Family
Singlepole
3-way or multi-location
Singlepole
3-way or multi-location
Abella®
–
–
–
AB-S6AM-
Ariadni®
–
AYF-103P-
–
–
Ceana®
–
–
–
–
–
DVF-103P-
–
–
–
DVSCF-103P-
–
–
Glyder®
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
LX-1PSL-
LX-3PSL-
Diva® Gloss Diva Satin Colors®
Technical notes
Maestro® Gloss Maestro® Satin Colors® Maestro Wireless®
–
MAF-6AM-
–
MA-S8AM-
–
MSCF-6AM-
–
MSC-S8AM-
–
MRF2F6AN-DV-
–
MRF2-6ANS-
Nova®
NF-10-
NF-103P-
–
–
Nova Tb®
NTF-10-
NTF-103P-
–
–
Skylark®
SF-10P-
SF-103P-
–
–
Spacer System®
SPSFS6A-
SPSF-6AM-
SPSFS6A-
SPSF-S6AM-
Vareo®
–
VF-10-
–
VETN-1000-
Vierti®
contact Lutron
contact Lutron
Lighting load interfaces must be matched to load type and voltage
•
•
•
•
•
•
All load interfaces for dimmed load are controlled by a 120 V 3-wire fluorescent dimmer Power feed to dimmer may differ from lighting load/interface voltage Interfaces typically require additional power feeds For wiring information, consult wiring diagrams, see pgs. 193-195 For assistance and additional solutions, consult Lutron Technical Support at 1.800.523.9466 (24 hours/7 days)
Interface mounting PHPM interfaces mount to 2-gang electrical backbox (W: 6.30 in x H: 5.10 in)
•
•
GRX-TVI enclosure is surface mount only (W: 6.10 in x H: 12.50 in x D: 3.30 in)
Use only dimmer model numbers listed. * Dual 120/277 V model given,120 V only versions are also available. Please see Technical notes, pg. 179. www.lutron.com | 1.800.523.9466 |
179
Addendum | Advanced conceptual connections Vierti * ®
3-wire fluorescent dimming
0-10 V fluorescent dimming
Lamps:
Lamps: Linear Lamps:
Lamps:
U-Bent Linear
Hi-lume® 3D Ballasts
Compact Twin Tube U-Bent Linear
Compact Twin Tube
Compact SETM Ballasts
Hi-lume® Ballasts
EcoSystem® Ballasts
0-10 V Ballasts (by others)
Eco-10® Ballasts
0-10 V Interface
3-Wire Fluorescent Dimmer
3-Wire Fluorescent Dimmer
For illustration purposes only. Consult model number pages for specific voltage and capacity information. For ballast information, visit www.lutron.com/ballasts. *Consult Lutron Technical Support for information on interfaces with Vierti. www.lutron.com | 1.800.523.9466 |
A1
Addendum | Advanced conceptual connections Vierti * ®
LED dimming
Low Voltage dimming
Low Voltage LED Lighting
Hi-lume® LED Driver
0-10 V LED Drivers (by others)
Magnetic Low Voltage
Electronic Low Voltage
MLV Transformer (by others)
ELV Transformer (by others)
0-10 V Interface
3-Wire Fluorescent Dimmer
3-Wire Fluorescent Dimmer
Incandescent/ MLV Dimmer
ELV Dimmer
For illustration purposes only. Consult model number pages for specific voltage and capacity information. For more information on LED drivers, visit www.lutron.com/LED. *Consult Lutron Technical Support for information on interfaces with Vierti. www.lutron.com | 1.800.523.9466 |
A2
Addendum | Advanced conceptual connections Vierti * ®
Incandescent dimming
Incandescent/ Halogen
Switched loads
Switched Fan
Non-Dim Lighting
†
Switching Module
Incandescent/ MLV Dimmer
Switch
Switch
For illustration purposes only. Consult model number pages for specific voltage and capacity information. *Consult Lutron Technical Support for information on interfaces with Vierti. † Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A3
Addendum | Custom Architectural Wallplates Table of contents Standard architectural wallplates.....................B1 Customized architectural wallplates................B1 Determine which architectural wallplate is right for your application...............B2 How to construct a wallplate model number.....................................................B3 Derating tables....................................................B9 Multi-gang worksheet......................................B12
Standard architectural wallplates Six popular 2-, 3- and 4-gang wallplates in nine matte colors (48-hours shipment available)
««
Fins broken wallplates (FB) Controls fit into standard size backboxes with standard size wallplates • Dimmers must be derated, pg. 170
Use with: • Vareo® • NovaTa® • Architectural accessories • GRAFIK Eye ® seeTouch®, and architectural style wallstations • HomeWorks® controls What’s included:
•
H: 4.56 in x W: 4.56 in
Customized architectural wallplates Create a wallplate for any application
««
H: 4.56 in x W: 4.56 in
Adapter plate, screws, wallplate (inserts not included)
Use with: • Vareo® • NovaTa® • Architectural accessories • GRAFIK Eye ® seeTouch®, and architectural style wallstations • HomeWorks® controls
Fins broken wallplates (FB) • Controls fit into standard What’s included: size backboxes with standard size wallplates • Dimmers must be derated • Combines large and small controls
Adapter plate, screws, wallplate (inserts not included)
««
Addendum | Custom Architectural Wallplates
No fins broken wallplates (NFB) • Controls require wider-than-standard backboxes and wallplates (see pgs. B7–B8) • Dimmers can be used to their full capacity • Combines large and small controls H: 4.56 in x W: 5.41 in Multi-gang, screwless, seamless wallplates available—wallplate selector tool at www.lutron.com/lutron/wallplate. Lutron’s architectural style controls can be ganged at full dimmer capacity using “No Fins Broken” wallplates. When using “Fins Broken” wallplates, maximum dimmer capacity must be derated. See pg. 170 for complete information on derating a dimmer. www.lutron.com | 1.800.523.9466 |
B1
Determine which architectural wallplate is right for your application Standard architectural wallplates
««
Fins broken wallplates (FB) • 48-hour shipment available • Use to conserve horizontal wall space
Custom architectural wallplates
««
Fins broken wallplates (FB) • If you need to conserve horizontal wall space • If you need to combine large and small controls • If you need metal wallplates or custom colors
««
Addendum | Custom Architectural Wallplates
No fins broken wallplates (NFB) • If you need to combine large and small controls • If you need metal wallplates or custom colors • Require full rating of dimmers
Lutron’s architectural style controls can be ganged at full dimmer capacity using “No Fins Broken” wallplates. When using “Fins Broken” wallplates, maximum dimmer capacity must be derated. See pg. 170 for complete information on derating a dimmer. www.lutron.com | 1.800.523.9466 |
B2
Addendum | Custom Architectural Wallplates
How to construct a wallplate model number Use the following steps to order multi-gang, metal, and replacement wallplates 1 product code NT
2 insert code(s)
Thin profile (D: 0.3 in or 7.6 mm)
Vareo®
Nova Ta®
Architectural accessories
Insert GRAFIK Eye® seeTouch® wallstation N
Wide profile (D: 0.65 in or 16.5 mm)
The detachable face of the product is called an insert. Each product has its own Insert Code, see pgs. B5–B6 for a complete listing of model numbers and their insert codes. Select Insert Codes and add to model numbers in left to right order as if looking at the front of the wallplate (see example at the bottom of this page).
Nova®
When ganging products together under a common wallplate the product‘s depth must be the same style (NT or N).
NT-SOL-FB-WH www.lutron.com | 1.800.523.9466 |
Inserts used in a fins broken application. From left to right: Nova Ta® (small control) Vareo® (small control) Nova Ta® (large control)
NT-SOL-FB-WH B3
Addendum | Custom Architectural Wallplates
3 ganging code
4 color code
FB
Available colors
NFB
Colors (architectural matte finish) (3–5 days)* WH White GR Gray BE Beige TP Taupe IV Ivory BR Brown AL Almond BL Black LA Light Almond SI Sienna Fins broken
No fins broken
Metals (special finishes) (4–6 weeks)† SB Satin Brass SC Satin Chrome BB Bright Brass SN Satin Nickel BC Bright Chrome BN Bright Nickel QB Antique Brass AU Gold Plated QZ Antique Bronze
Mixing small and large controls Correct: group small and large at either end
Sm Sm
Lg
Incorrect: do not alternate small and large
Lg
Lg SmSm Sm
Lg
Sm
4.5 in required for vertical installations
Lg
Lg
Lg Sm Sm Sm
Lg
Sm
Lg
Lg
Sm
Determine whether controls need to use maximum load capacity or can be derated. Derating is the reduction of the maximum capacity (load) a unit can reliably handle when fins/side sections are removed. A scored section along each side of the mounting plate/fin is designed to be removed to facilitate ganging.
Anodized aluminum Lg Lg Sm CLA Clear BLA Black
BRA Brass
Custom colors and finishes are available by providing Lutron® with a paint color number, swatch, or sample. Lutron can color match your controls. Contact Customer Service at 1.888.LUTRON1. Multi-gang, screwless, seamless wallplates available—wallplate selector tool at www.lutron.com/lutron/wallplate. CAD file downloads available at www.lutron.com/technical_info/cad.
See pg. 170 for more information about your specific product’s derated capacities. Note: If any controls are ganged under the same wallplate with no fins broken, then the ganging code is NFB. *Most matte wallplates ship in 3-5 days; wider wallplates require additional time. † Consult Lutron® Customer Service for pricing and delivery at 1.888.LUTRON1.
NT-SOL-FB-WH www.lutron.com | 1.800.523.9466 |
NT-SOL-FB-WH B4
Addendum | Custom Architectural Wallplates
Model Number
Insert Code
Control Size
O O K K H H K O
small small small small small small small small
S S S S P S P L U TF S S S S S S S S P S L S S S S P S P L U
small small small small small small small large large large small small small small small small small small small small large small small small small small small small large large
Nova Ta® NT-1PSNT-3PSNT-4PSNT-600NT-603PNT-1000NT-1003PNT-1500NT-1503PNT-2000-* NT-DPDT-CO-MANT-DPDT-CO-MONTA-2NTB-600NTB-1000NTELV-300NTELV-600NTF-10NTF-103PNTFS-6ENTFS-12ENTFSQNTFTU-5ANTFTV NTLV-600NTLV-603PNTLV-1000NTLV-1003PNTLV-1500NTLV-1503P-
Insert Code
Control Size
Accessories
Vareo® V-600V-1000VETN-1000VETS-1000VETS-1000-SLVETS-A-SLVETS-RVF-10-
Model Number
www.lutron.com | 1.800.523.9466 |
NT-6PFNT-CJNT-PJNT-PJ8CJNT-PJ8X2NT-PJ8X3NTR-15NTR-15-GFCINTR-15-IG-ORNTR-20NTR-20-GFCINTR-20-IG-OR-
R31 9 8 TE TC TD R R31 R1 4 R31 R1
small small small small small small small small small small small small
K T8 T5 T1 A A A R3 R3 R3 R3 R3 R3
small small small small small small small small small small small small small
GRAFIK Eye® Wallstations NTGRX-1SNTGRX-2B-SLNTGRX-4BNTGRX-4MNTGRX-4SNTGRX-4S-IRNTGRX-SI4S-IRSG-2BISG-4BISG-4MISG-4NRLISG-4SISG-4SIRI-
Blank Inserts and Yokes For each blank ordered, order one yoke to attach wallplate to backbox. small blank insert E* small large blank insert G** large **small yoke NT-YS **large yoke NT-YL
*NT-2000- must use NFB Series only. 1 Product insert is permanently attached. Order the device in the color desired, wallplate will not have an insert to change the device color in the field. B5
Addendum | Custom Architectural Wallplates
Model Number
Insert Code
Control Size
Nova® N-1PSN-1PS-374- -CSAN-3PSN-3PS-374- -CSAN-4PSN-600N-603PN-1000N-1003PN-1500N-1503PN-2000N-2003PNELV-450NF-10NF-10-277NF-103PNF-103P-277NF-20NF-20-277NF-30NFS-6ENFS-12ENFTVNLV-600NLV-603PNLV-1000NLV-1003PNLV-1500NLV-1503PNLV-2003P-
S S S S S S P S P L U L U S S L P P L L L S L S S P L P L U U
small small small small small small small small small large large large large small small large small small large large large small large small small small large small large large large
Blank Inserts and Yokes For each blank ordered, order one yoke to attach wallplate to backbox. small blank insert E* small large blank insert G** large **small yoke N-YS **large yoke N-YL www.lutron.com | 1.800.523.9466 |
Available colors Nova Ta®/Vareo® ONLY Colors (architectural matte finish) (3-5 days)* WH BE IV AL LA
White Beige Ivory Almond Light Almond
GR TP BR BL SI
Gray Taupe Brown Black Sienna
Metals (special finishes) (4-6 weeks)† SB Satin Brass SC Satin Chrome BB Bright Brass SN Satin Nickel BC Bright Chrome BN Bright Nickel QB Antique Brass AU Gold Plated QZ Antique Bronze Anodized aluminum CLA Clear BLA Black
BRA Brass
Available colors Nova® ONLY Colors (architectural matte finish) (3-5 days)* WH White LA Light Almond BE Beige GR Gray IV Ivory BR Brown AL Almond BL Black
*Most matte wallplates ship in 3–5 days; wider wallplates require additional time. † Consult Lutron® Customer Service for pricing and delivery at 1.888.LUTRON1. B6
No fins broken wallplates (NFB) (no derating required—full rated capacity) • For Vareo® and Nova Ta® installations
««
Number of Small Controls
For use with installations that DO NOT include an NT-2000-
Number of Large Controls
0
1
2
3
0
1
2
3
4
5
NA
1
1+1
4
4+1
7
2.75 in
5.41 in
8.14 in
10.86 in
13.50 in
1
3
5
6
4.56 in
7.22"
10.01 in
12.68 in
4
6
7
9.09 in
11.82 in
14.49 in For larger wallplate configurations, contact Lutron® Customer Service.
6 13.63 in
number of backboxes wallplate width No fins broken wallplates (NFB) (no derating required—full rated capacity) • For Vareo® and Nova Ta® installations • NT-2000- can be used ««
Addendum | Custom Architectural Wallplates
Number of Small Controls
NT-2000-
Number of Large Controls
1
2
3
0
1
2
3
2
2+1
2+1+1
2+4
4.56 in
7.22 in
10.01 in
12.68 in
2+2
2+2+1
2+2+1+1
9.09 in
11.82 in
14.49 in
2+2+2
For larger wallplate configurations, contact Lutron® Customer Service.
13.63 in
number of backboxes wallplate width
Note: When ganging an even number of small controls, use backboxes with tapped ears. Do not use plaster rings or gangbox covers. www.lutron.com | 1.800.523.9466 |
B7
Fins broken wallplates (FB) (derating required) • for Vareo® and Nova Ta® installations
««
Addendum | Custom Architectural Wallplates
Number of Small Controls
Number of Large Controls
0
1
2
3
0
1
2
3
4
5
NA
1
2
3
4
5
6
4.56 in
6.32 in
8.45 in
9.97 in
11.85 in
1
3
4
5
6
7
4.56 in
6.32 in
8.14 in
9.97 in
11.85 in
15.5 in
3
5
6
7
8.20 in
9.97 in
11.79 in
15.5 in
5
7
11.85 in
15.5 in
6
For larger wallplate configurations, contact Lutron® Customer Service.
number of backboxes wallplate width Example: plus sign (1 + 1) two small controls The plus sign (1 + 1) indicates the need for additional backboxes connected by a chase nipple or spacer with 3/4 in separation as shown.
See pgs. B5–B6 for small and large control model numbers.
3/4 in
Two single-gang backboxes connected by a chase nipple with 3/4 in separation.
Two small controls mounted on a no fins broken adapter plate (provided with wallplate).
Use a spacer, chase nipple or Lutron® part# PLUS-ADAPTER® -3.5. No Fins Broken (NFB) screwless seamless wallplate with no visible hardware NT-SS-NFB-WH.
www.lutron.com | 1.800.523.9466 |
B8
Addendum | Custom Architectural Wallplates Derating Table 1 New Architectural | Vierti® Designer | Maestro®, Maestro IR®, Maestro Wireless®, Spacer System®, Diva®, Lyneo® Lx, Skylark ContourTM, Skylark® Traditional | Abella®, Ceana®, Ariadni®, Glyder®, Rotary
No fins broken
1 fin broken
2 fins broken
600 W
500 W
400 W
1000 W
800 W
650 W
300 W
250 W
200 W
300 W
250 W
200 W
600 VA / 450 W
500 VA / 400 W
400 VA / 300 W
1000 VA / 800 W
800 VA / 650 W
650 VA / 500 W
300 W
250 W
200 W
500 W 600 W
450 W 500 W
400 W 400 W
Incandescent Dimmers Dual dimmers Magnetic low-voltage Dimmers Electronic low-voltage Dimmers
Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vierti
60 ballasts / 6 A
50 ballasts / 5 A
35 ballasts / 3.5 A
Maestro /Spacer System
20 ballasts / 6 A
20 ballasts / 5 A
20 ballasts / 3.5 A
no derating
no derating
no derating
5 A
4 A
3.3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A
1.5 A
1.5 A
5 A
4 A
3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 360 W
1.5 A / 360 W
1.5 A / 360 W
2.5 A / 300 W
2.1 A / 250 W
1.7 A / 200 W
Vierti
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Maestro (light/fan)
8 A / 3 A
6.5 A / 3 A
5 A / 3 A
Abella (light/fan)
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Diva, Skylark, Lyneo Lx and Ariadni Tu-Wire®: Spacer System, Diva, Skylark Fan controls
Fully variable Fan/light controls
Fully variable Electronic switches
www.lutron.com | 1.800.523.9466 |
B9
Addendum | Custom Architectural Wallplates Derating Table 2 Architectural | Vareo®, Nova Tb®
No fins broken
1 fin broken
2 fins broken
600 W
500 W
300 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
1950 W
–
–
600 VA / 450 W
500 VA / 400 W
300 VA / 250 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
300 W
300 W
250 W
600 W
500 W
400 W
20 ballasts / 8 A
20 ballasts / 6 A
20 ballasts / 4.5 A
6 A
no derating
no derating
8 A
no derating
no derating
16 A
no derating
no derating
30 mA ballasts
no derating
no derating
5 A
4 A
3.3 A
1.5 A
no derating
no derating
Fully variable
6 A
4.2 A
2.5 A
Fully variable
12 A
10 A
8.3 A
VETS-1000-
1000 W
800 W
650 W
VETS-1000-SL-
1000 W
900 W
700 W
VETN-1000-
1000 VA
700 VA
550 VA
Incandescent Dimmers
Magnetic low-voltage Dimmers
Electronic low-voltage Dimmers Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Vareo Nova Tb
0-10 VDC control1 Tu-Wire® Fan controls Quiet 3-speed
Electronic tapswitches2
For further information on ganging Nova®, visit www.lutron.com/customganging.
PowerPack required for line voltage switching. VETS-R-Auxiliary electronic tapswitches do not require derating.
1 2
www.lutron.com | 1.800.523.9466 |
B10
Addendum | Custom Architectural Wallplates Derating Table 3 Architectural | Nova®
No fins broken
1 fin broken
2 fins broken
600 W
600 W
600 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
2000 W
1800 W
1500 W
600 VA / 450 W
600 VA / 450 W
500 VA / 400 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
2000 VA / 1600 W
1800 VA / 1500 W
1500 VA / 1200 W
450 W
400 W
350 W
16 A
no derating
no derating
8 A
no derating
no derating
6 A
no derating
no derating
60 ballasts / 16 A
no derating
no derating
5 A
4 A
3.3 A
6 A
5.5 A
5 A
12 A
11 A
10 A
Incandescent
1
Dimmers
Magnetic low-voltage
1
Dimmers
Electronic low-voltage Dimmers Fluorescent Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem® Nova
0-10 VDC control Tu-Wire® Fan controls Fully variable
Controls must have side sections removed to gang if using VWP wallplates.
Recommended 40 W minimum load.
1
www.lutron.com | 1.800.523.9466 |
B11
www.lutron.com | 1.800.523.9466 |
Position 2
FAX Intnl: 610.282.3090
Project Name: Room: Control Address #: P.O. #:
Fins Broken
No Fins Broken 4.5" Required
Vertical Installations
Position 4
or
or
Page: Quantity: Lutron Order #: Lutron Job #:
Mounting Small and Large Controls Mount using center or offset mounting holes as needed.
Position 5
FB (Fins Broken)
Wallplate Width:
Position 3
Thin Profile Vareo®/NovaTa®
Wallplate Thickness:
COPY FOR EACH USE
Lg
Lg Sm Lg
Sm Sm
Sm
Lg
Lg
Incorrect
Correct
Lg Sm
Sm Sm
Mixing Small and Large Controls Group large controls together on one end of the wallplate. Do not alternate large and small controls.
Position 6
NFB (No Fins Broken)
Heavy Duty Nova®
For additional information use the Wallplate Selector tool located on the Lutron® website at www.lutron.com/lutron/wallplate.
Coopersburg, PA 18036 Phone: 1.888.LUTRON1
FAX West: 610.282.6412
FAX East: 610.282.8321
Wallplate Model #: ________________________________________ Wallplate Color: ___________________________________________ Customization: Engraving Custom Color Silk Screen Backbox Configurations: ____________________________________
Interface (if needed)
Wallplate Insert Code
Small or Large Control
Derated Capacity (Fins Broken)
Full Rating (No Fins Broken)
Control Model Number
Number of Fins Removed
Load Size W/VA/A
Load Type
Position 1
• Outline wallplate gang size below with a marker (cross out the rest)
• For use with Vareo®, NovaTa® and Nova®
Multi-gang Worksheet (1–6 Gang Installation)
Addendum | Custom Architectural Wallplates
B12
