Transcript
Model 2150 - POE Ethernet RJ45 to Fiber Optic Media Converter Features: • Supports 10 Base-T/100 Base-TX and 10 Base-FL/100 Base-FX Standard with Auto-Negotiation • Supports 10 Base-T/100 Base-TX with 802.3 AF Power over Ethernet Power Sourcing Equipment POE Power Device Detection POE PD Classification POE End Span • Small size • Power, Link Status, Activity, and Collision LED indicators • ST or SC optical connections (ST, SC, or FC options for Single Mode) • Auto negotiation between 10 and 100 Mbps speeds • Plug & Play - No Setup Required
PWR
Tx
LINK
Rx
100M
ACT
ETHERNET
ETHERNET BIT-DRIVER MODEL 2150 - POE
10M OPT ACT OPT LINK POE ACTIVE
PWR
Operation Mode: 10 Base-T/100 Base-TX and S.I. Tech 2150POE media converter works in conjunction with 215010 Base-FL/100 Base-FX, 10/100A media converter for connecting between Ethernet equipment Auto 10/100 Sensing, Power and Ethernet powered devices over fiber. The unit contains LED over Ethernet indicators to provide visible verification of transmission status and Input/Output Interface: Shielded RJ45 media converter functions. Transmission Line Interface: ST optical connector is standard (SC Option), (ST, SC, or FC for SM) Transmission Distance: 6600 ft. (2 Km)* OPERATING DISTANCE FOR FIBER OPTIC CABLE Transmitter Output Power: 30 Microwatts into 62.5/125 Fiber Size Attenuation Distance Distance micron fiber (Microns) dB/Km Meters* Feet* System Wavelength: 1300 nm Multimode (Single mode (1300nm) Option) 2000 6600 50 1.00 Data Rate: 10/100 Mbps 2000 6600 62.5 1.00 Bit Error Rate: 10 -9 5000 16000 10** 0.35 Receiver Sensitivity: 10 Microwatts @ 1300 nanometers * While S.I.Tech 2150 can work up to 2 Km, Ethernet spec is Operating Temperature: 0 oC to 50 oC limited to 330 ft (100 meters) for 100 Mbps. Weight: 1.0 lb (450 grams) **Single mode option - 1300nm (observe network timing rectrictions) Input Power: External with power supply Optical Unit Connection: Connect the optical transmission line to #2164-48 - 100 to 240 VAC, 50/60 Hz, to the T and R receptacles. Note which cable channel goes to T or R 48VDC, UL, CSA, CE, & TUVGS Listed) by noting cable imprint. On the other end, reverse the connections. Metal Enclosure: 5.75" X 3.8" X 1.0" (14.6 X 9.6 X 2.54 cm) Meets FCC requirements of Class A, Part 15 Computing Devices Standard, IEEE 802.3 Ethernet Standard. Specifications subject to change without notice. FIBER OPTICS STP CROSS CABLE
Rx
Tx
2164
STRAIGHT CABLE
ETHERNET BIT-DRIVER
MODEL 2150 - POE
110 VAC or 230 VAC
ETERNET
PWR
Rx
2164
Tx
ETHERNET BIT-DRIVER
MODEL 2150 - 10/100A
110 VAC or 230 VAC
ETERNET
PWR
COMPUTER SERVER 10/100 Mbps
POWERED DEVICE
48VDC
SECURITY CAMERA
WIRELESS ACCESS POINT VOIP PHONE PWR
LINK
10M
ACT
100M
REP ACT
REP COL
OPT LINK
PWR
LINK
10M
ACT
100M
REP ACT
REP COL
OPT LINK
APPLICATION EXAMPLE For application engineering assistance: 630-761-3640 FAX: 630-761-3644 S.I.Tech, P.O. Box 609, Geneva, Illinois 60134 U.S.A. Web site: http://www.sitech-bitdriver.com. ©2005 S.I. Tech, Inc.
