Transcript
VR Series - Power Conversion Modules Overview:
Ca ble As Te rm sem ina bly lB loc k
In pu t
Al tro M nix od el Nu m Ou be tp r ut
The unit converts a 24VAC or 24VDC input into a regulated 12VDC ouput.
VR1
12VDC @ 1 amp 24VAC or 24VDC
x
-
VR1T
12VDC @ 1 amp 24VAC or 24VDC
-
x
VR2T
12VDC @ .5 amp 24VAC or 24VDC
-
x
Specifications: • Converts a 24VAC or 24VDC input into a regulated 12VDC ouput (Fig. 1). • Built-in overload protection. • Electronically filtered and regulated output. • Power LED. • High impact insulated housing. • Compact design allows for installation in variety of camera housings. Dimensions: 1.625"L x 2.375"W x 1"H
Fig. 1
Applications: Power for: • 12VDC CCTV cameras and accesories • Fiber Optic Transmiters • REX PIR’s • Prox Readers, etc.
Installation Instructions: 1. Mount the unit in desired location. 2. a. VR1: Connect Yellow lead and Purple lead to 24VAC transformer or 24VDC source. b. VR1T, VR2T: Connect 24VAC transformer or 24VDC power source to terminals marked [Input]. 3. Measure output voltage and check polarity before connecting devices, in order to avoid potential damage. 4. a. VR1: Connect Red lead [Pos. +)] and Black lead [Neg. --- ] to 12VDC device to be powered. b. VR1T, VR2T: Connect 12VDC device to be powered to terminals marked [+ DC --]. 5. LED will illuminate when power is present.
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice. 140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 web site: www.altronix.com, e-mail:
[email protected], Lifetime Warranty, Made in U.S.A. IIVR series - Rev. 122403 J11G
MEMBER
