Transcript
96-01132 / rev. 1d / 10-05-10
ViewPoint Monitoring Console System ™
EIA/TIA Compliant EXCEPTIONAL SUPPORT & PROTECTION™
Flexible, scalable system has been designed for optimum operator effectiveness Features • Fully welded bays provide a heavy-duty structure that can be assembled quickly • Available with an 18” deep work surface or 34” desktop • A large variety of standard finishes available • Most configurations ship in 3 weeks or less • Custom finishes and work surfaces available upon request • UL Listed in the US and Canada • GREENGUARD IAQ certified • LCD monitors can be mounted using optional monitor arms
ViewPoint™ Series monitoring console system shall be Middle Atlantic Products model # VC. Overall dimensions of the console bays shall be __”W x 30”H x 19”D. Console system shall feature welded steel bays of Uni-Frame™ construction and extensible design that provides optimal structural integrity, and unrestricted cable management and access. Console system shall have exterior support foot placement that provides support and unimpeded chair/operator movement. Work surface/ Desktop shall have cantilevered supports that provide unimpeded leg movement. Each 24” width bay shall accept rackrail or a slide-out CPU tray. Each 24” bay shall have a 250 lb. weight capacity. Shall include 2 horizontal, segregated raceways in each bay and wedge, configurable for upper or lower bay installation. Shall include a minimum of one 15 amp duplex per 24” bay (work surface only). Work surfaces shall have a 3 position height selection. ViewPoint shall be available with an 18” deep work surface or 34” deep desktop, available in a Wenge, Dark Cherry, Dark Pecan, Aged Cherry, Honey Maple, Light Walnut, Maple, Shark Gray, Pepperstone, Graystone or Darkstone RTF thermolaminate finish and constructed of 1-1/8” thick triple-refined MDF. Connecting wedges shall be available with 15°, 22°, 30°, 45° and 90° (forward) and 15°, 22°, and 30° (reverse) angles. Extender bays shall be available to provide a total of 33” or 39”
of useable depth. Bays shall be constructed of 11 and 14 gauge steel and finished in a fingerprint resistant black textured powder coat. ViewPoint shall have 3” and 4” cable pass-throughs trimmed with plastic bushings to create a smooth internal surface. ViewPoint shall include all tools needed for the assembly of the console. Grounding and bonding stud shall be 1/4-20 threaded, installed in base of the bay, 2 per bay. ViewPoint shall satisfy the 1997 UBC and 2001 CBC Seismic Zone 4 and the 2007 CBC, 2000, 2003 & 2006 IBC, 2002 & 2005 ASCE Standard 7 and 2003 & 2005 Ed. NFPA 5000 Seismic Use Group III lateral force requirements for protecting 320 lbs. per 24” section of essential equipment in high importance, upper floor installations with an Ip value of 1.5. ViewPoint system shall meet ANSI-BIFMA, BSR/HFES 100, and VESA guidelines and requirements. ViewPoint shall be UL Listed in the US and Canada. ViewPoint shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. ViewPoint enclosure shall be RoHS EU Directive 2002 / 95 / EC compliant. ViewPoint shall be manufactured by an ISO 9001 and ISO 14001 registered company. Steel components shall be warrantied to be free from defects in material or workmanship under normal use and conditions for the lifetime of the product. Thermolaminate components shall be warrantied to be free from defects in material or workmanship under normal use and conditions for a period of 7 years.
c u s t o m i z a b l e s p e c i f i c at i o n c l i p s ava i l a b l e at m i d d l e at l a n t i c . c o m US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
96-01132 / rev. 1d / 10-05-10 / ViewPoint™ Monitoring Console System
Architects’ and Engineers’ Specifications
Architects’ and Engineers’ Specifications OPTIONS Monitor Mounts – shall be available to accommodate 1, 2, 3, 4 or 6 monitors. Shall mount to the rear top of 12”, 24”, 36”, 48” or 72” console bays. Shall tilt and pivot. Shall be hinged, articulating or counter-balanced. Shall be constructed of cast aluminum with steel fittings. Shall be VESA compliant. Shall have a weight capacity of, by model: Part # Weight capacity per monitor Total weight capacity VC-MM1X1 28 lbs. 28 lbs. VC-MM2X1 25 lbs. 50 lbs. VC-MM1X2 25 lbs. 50 lbs. VC-MM1X2PL 21 lbs. 42 lbs. VC-MM2X2 22 lbs. 88 lbs. VC-MM3X1 25 lbs. 75 lbs. VC-MM3X2 25 lbs. 150 lbs. Rackrail – 10 space rackrail shall be available for horizontal equipment mounting in the front/rear of any 24” section of a 24”, 36”, 48” or 72” bay and shall be part # VC-B24-RR10. 6 Space rackrail for vertical equipment mounting in the top of any 24” section of a 24”, 36”, 48” or 72” bay, for use with work surface only, and shall be part # VC-TRK. Rackrail shall conform to EIA standards. Rackrail shall be constructed of 11-gauge steel. Shall be infinitely adjustable front-to-rear. CPU Tray – Slide-out CPU tray shall mount in any 24” section of a 24”, 36”, 48” or 72” bay, and shall configure to slide out of the front or rear. Slide-out CPU tray shall have useable dimensions of 19”W x 14.25”D, extend 13” and have a weight capacity of 75 lbs. Slide out CPU tray shall be part # VC-2419ST. Extender Bay - Extender Bay shall mount to the front of any 24” section of a 24”, 36”, 48” or 72” bay. Extender bay shall have 12 space front rackrail and 10 space rear rackrail. Extender bays shall be available in the following depths and configurations: Part # Door type Useable Depth Total Useable Depth VC-2418X-PD Plexiglass 18” 33” VC-2418X-VD Vented 18” 33” VC-2424X-PD Plexiglass 24” 39” VC-2424X-VD Vented 24” 39” Rear fan door – Rear fan door shall replace standard rear console door on any 24” wide bay. Rear fan door shall provide 100 CFM of air extraction, generate less than 27 db, and be thermostatically switched. Part# shall be VC-B24-FD. Storage Cabinet – Storage cabinet shall be constructed of constructed of 1” thick high pressure laminate on particle core. Dimensions shall be 23-1/2”W X 36”D. Storage cabinet shall have positionable glass doors and rear covers. Storage cabinet shall mounts to the front of any 24” section of a 24”, 36”, 48” or 72” bay and have a matching surface. Storage cabinet part # shall be VC-3624-GD. Peninsula – Peninsula shall be constructed of 1-1/8” thick triple-refined MDF. With an Impact resistant to RTF thermolaminate finish. Peninsula dimensions shall be 24”W x 36”D. Peninsula shall mount to the front of any 24” section of a 24”, 36”, 48” or 72” bay. Peninsula shall be part # VC-PEN-3624. Side Panels – Side panels shall be available in 3 styles, and be constructed of 1” thick triple-refined MDF. Side panels shall consist of a left and right side and mount to any 12”, 24”, 36”, 48” or 72” bay. File Cabinet – File cabinet shall have 3 drawers and be constructed of 16 and 18 gauge steel. File cabinet dimensions shall be 18”D x 27” H. File cabinet shall fit underneath a peninsula, and have swivel casters for ease of movement. File cabinet shall be part # VC-FC-3. Articulating Task Light – Articulating task light shall mount to the top rear of the console and be part # VC-LCM. Articulating Keyboard Shelf – Articulating keyboard shelf shall mount underneath the work surface/desktop. Shelf shall slide underneath the work surface/desktop when not in use. Shelf shall be adjustable in height and have a useable area of 31” W x 10-1/2”D. Shelf shall be part # VC-KBS. Top Mount Turret Racks – To mount turret racks shall be available with 4 or 9 rackspaces, have a minimum 8-1/2” useable depth, and work with consoles with an 18” deep work surface only. Top mount turret racks shall mount to any 24” section of a 24”, 36”, 48” or 72” bay. Part# # of rackspaces Mounts to VC-TR2419-4 4 24”, 48”, 72” bay VC-TR3619-4 4 36” bay VC-TR2419-9 9 24”, 48”, 72” bay VC-TR3619-9 9 36” bay Chair – Fully adjustable, ergonomically designed professional use monitoring chair shall have a 15 year warranty, and shall be part # CHAIR-CF1-B. US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
6.06 [ 154 ]
“F” grommet door qty 1 per assembly for 36", 48", 72" consoles
locking latch
REAR VIEW
4x N .44 [11 ] 1/4-20x1" grounding stud 2 locations
2.63 [67]
1.38 [ 35 ] 1-2 [51] X 4 [102] cable duct 1-2 [51] X 2 [51] cable duct which can be relocated
3.13 [79]
19.00 [ 483 ]
12.48 [ 317]
1.13 [29] 1.50 [38 ]
2.50 typ [ 64 ] “C” qty of low voltage provisions
30.00 [ 762 ]
“D” width
TOP VIEW
locking latch
N 1.75 [44 ]
See detail A
8.46 [215 ]
.87-1.38 [22-34] adjustable leveling feet
1.13 [29] thermolaminated MDF
“B” qty of receptacles
“G” qty of monitor mount locations
All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]
scale 3/16
DETAIL A
bay to bay cable management openings
37.00 [ 940 ]
3.13 [79 ]
N/A
29.12 [740 ]
NO
28.25 [718 ]
NO
1
FRONT VIEW
“C” Quantity of Low Voltage Provisions
6.00 [152]
NO
“G” Quantity Monitor Mount Locations “B” Quantity of Receptacles
N/A
NO
“F” J-Box
“A” Quantity of Doors
N/A
12.00 [305]
“E” Grommet Doors Part#
N/A
N/A
“D” Width VC-619-WS18
N/A
5
2
YES
5
VC-1219-WS18
YES
YES
7
3 36.00 [914]
YES
YES
NO 2
48.00 [1219]
YES
NO 2
2
72.00 [1829]
24.00 [610] 4
2
3
1 VC-3619-WS18
4
3
1
VC-4819-WS18
6
2
VC-7219-WS18
VC-2419-WS18
leveling feet are installed to lowest position from factory
“E” J-box Installed
8.46 [ 215 ] opening
removable floor panel
1.50 [38 ]
1.50 [38 ]
“A” qty of doors
26.50 [ 673 ]
3.00 [76] X 1.50 [38] OB
locking latch
ViewPoint™ 18” Work Surface
1.81 [46 ]
12.58 [ 320 ]
2.00 [ 51 ]
BOTTOM VIEW
2.62 [66 ]
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
ViewPoint™ Wedge 18” Work Surface
ws series wedges come with pre-installed top access panels
1-2 [51] x 4 [102] cable duct 1-2 [51] x 2 [51] cable duct
3.00 [76] x 1.50 [38] OB on 45˚ and 90˚ standard DT and WS wedges only 13.44 [ 341]
Front Door
locking latch
Rear Door
27.88 [708] overall w/desktop 30.00 [762]
Cable Ducts
TOP VIEW “A” angle
locking latch
BOTTOM VIEW
6.91 [175]
FRONT VIEW
All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]
"B" width
“B” Width
REAR VIEW
“A” Angle
Part#
N/A N/A
N/A
N/A
N/A
Y
N/A
7.42 [188]
Y
N/A
15º
N/A
Y
N/A
VC-W1519-WS18
Y
N/A
N/A 12.29 [312]
Y
N/A
N/A 30º
16.98 [431]
N/A
N/A 45º
29.21 [742]
N/A
9.85 [250]
VC-W3019-WS18
90º
2.54 [65]
2.53 [64]
22.5º
VC-W4519-WS18
-15º
VC-W2219-WS18
VC-W9019-WS18
-22.5º
Y
VC-RW1519-WS18
N/A
VC-RW2219-WS18
N/A
-30º
2.55 [65]
VC-RW3019-WS18
cable management tie points 2.50 [64]
25.50 [ 648 ]
1.38 [35] 2.63 [67 ]
3.29 [ 83 ]
FRONT VIEW
VC-RW3019-WS18 shown below reverse wedge
scale 1/32
VC-W9019-WS18 shown above
2.96 [ 75 ]
1.50 [ 38 ]
FRONT VIEW
1.13 [ 29 ]
13.01 [ 331 ]
bay to bay cable managment openings
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
[ 11 ]
1/4-20x1" grounding stud 2 locations
4x n .44
REAR VIEW
“D” j-box installed
3.00 [76] x 1.50 [38]OB
locking latch
26.50 [ 673 ]
“A” qty of doors
1.50 [38 ]
1.50 [38 ]
8.46
opening
[215 ]
removable floor panel
2.63 [ 67 ]
1.38 [ 35 ]
3.13 [ 79 ]
1-2 [51] x 4 [102] cable duct 1-2 [51] x 2 [51] cable duct which can be relocated
ViewPoint™ 34” Work Surface
6.06 [ 154 ]
“C” grommet doors qty 1 per assembly for 36", 48", 72" console
1.81 [ 46 ]
12.58 [320 ]
2.00 [ 51]
BOTTOM VIEW
37.00 [ 940 ]
3.13 [79 ]
scale 1/8
DETAIL B
bay to bay cable management openings
12.48 [ 317 ]
1.13 [29 ]
TOP VIEW “B” width
NO
NO
NO
3
1
N/A
3.75 [ 95 ]
N 1.75 [44 ]
“A” Quantity of Doors
6.00 [152]
NO
NO
5
1.50 [38 ]
locking latch
Part#
N/A
12.00 [305]
NO
YES
5
30.00 [ 762 ]
FRONT VIEW
VC-619-DT34
2
24.00 [610]
YES
YES
7
leveling feet are installed to lowest position from factory
VC-1219-DT34
2
36.00 [914]
YES
YES
“E” qty of monitor mount locations
8.46 [ 215 ]
see drawing note
“E” Quantity Monitor Mount Locations
VC-2419-DT34
4
48.00 [1219]
YES
“D” Grommet Doors
VC-3619-DT34
4
72.00 [1829]
“C” Grommet Doors
VC-4819-DT34
6
“B” Width
VC-7219-DT34
All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]
2.62 [ 66 ]
see detail B
.87-1.38 [22-34] adjustable leveling feet
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
ViewPoint™ Wedge 34” Work Surface
3.00 [76] x 1.50 [38] OB on 45˚ and 90˚ standard DT and WS wedges only
VC-W1519-DT34
22.5º
15º
“A” Angle
12.29 [312]
9.85 [250]
7.42 [188]
“B” Width
Y
N/A
N/A
N/A
Cable Ducts
Y
Y
N/A
N/A
Rear Door
N/A
N/A
N/A
N/A
N/A
N/A
Front Door
27.87 [708]
VC-W2219-DT34
30º
16.98 [421]
Y
13.44 [341]
1-2 [51] x 4 [102] cable duct 1-2 [51] x 2 [51] cable duct
DT series wedges come with pre-installed rear filler panels
All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]
locking latch
"B"
width
VC-W3019-DT34
45º
Y
N/A
REAR VIEW
VC-W4519-DT34
29.21 [742]
N/A
Part#
VC-W9019-DT34
N/A
Y
N/A
N/A
N/A N/A
2.54 [65] 2.55 [65]
2.53 [64] -22.5º -30º
90º -15º
VC-RW1519-DT34 VC-RW2219-DT34 VC-RW3019-DT34
"A"
TOP VIEW
FRONT VIEW
6.91 [175]
BOTTOM VIEW
cable management tie points
2.50 [64]
FRONT VIEW
VC-RW3019-DT34 shown below reverse wedge
SCALE 1/32
13.01 [331]
FRONT VIEW
VC-RW3019-DT34 shown above
1.38 [35] 2.63 [67]
3.29 [83]
bay to bay cable management openings
1.13 [29]
1.50 [38]
2.96 [75]
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
ViewPoint™ Extender Bay
TOP VIEW 24.00 [610]
VC-2418X-xD 17.75 [451] VC-2424X-xD 27.75 [679]
door specified with suffix vented (VD) or plexi door (PD)
A
18.40 [467] 20.00 [508]
27.07 [687]
A
LEFT SIDE VIEW
FRONT VIEW
VC-2418X-xD 20.47 [520]
locking latch
VC-2424X-xD 26.47 [672]
VC-2418X-12xD 14.25 [362] VC-2424X-12xD 20.25 [514] rail to rail 20.63 [524]
2X ø .44 [11] floor anchor mtg locations
2X 1.62 [41]
21.00 [533] 12 rackspaces
95°
BOTTOM VIEW SECTION
A-A
All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
ViewPoint™ Storage Cabinet
2X 16.46 [418 ]
15.29 [388 ]
19.90 [505 ] shelf depth
23.53 [598 ]
TOP VIEW SECTION
15.29 [388 ]
A-A
1.125 [29 ]
21.69 [551 ] usable depth
B 39.52 [1004 ]
24.18 [614 ]
A
A
adjustable height range 28.25 (717) 29.00 (736) 30.00 (762)
B 36.00 [914 ]
FRONT VIEW
optional mounting holes for 2 shelves included
5.00 [127 ]
Note: includes 2 positionable glass doors and covers
4.60 [117 ]
7.11 [181 ]
SIDE VIEW SECTION
B-B
All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
max height extended to center of mtg plate 10.26 [261] to center of mtg plate 2.95 [75]
30.00 [762] ref
lowest position in console with worksurface
mount retracted in highest position
ViewPoint™ Single Monitor Mount
30.00 [762] ref
36.95 [939]
MONITOR MOUNTS IN CONSOLE WITH 18" DEEP WORKSURFACE
max height extended to center of mtg plate 10.26 [261]
to center of mtg plate 7.18 [182]
36.95 [939]
mount retracted in highest position
MONITOR MOUNTS IN CONSOLE WITH 34" DEEP DESKTOP
lowest position in console w/desktop
NOTE(S): 1) ALL DIMENSIONS ARE IN FORMAT OF IN [MM]. 2) ROTATION...............................................360˚ AT THREE JOINTS 3) MONITOR TILT........................................200˚ 4) MONITOR PIVOT.....................................LANDSCAPE TO PORTRAIT 6) MONITOR COMPATIBILITY.....................VESA 75MM AND 100MM 7) CABLE MANAGMENT.............................CABLES ARE CONCEALED IN ARM 8) MONITOR WEIGHT/MODEL NUMBER...13-28 LBS/VC-MM1X1
19.85 [504]
3.22 [82]
6.69 [170]
8.98 [228]
TOP VIEW
horizontal range
3.92 [100]
10.98 [279]
arm fold
TOP VIEW
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
ViewPoint™ Dual Vertical Monitor Mount
to center of mtg plate 4.74 [120]
16.37 [416] max height extended to center of mtg plate 26.35 [669]
lowest position in console
to center of mtg plate 4.74 [120]
MONITOR MOUNTS IN CONSOLE WITH 34" DEEP DESKTOP
All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]
max height extended to center of mtg plate 26.35 [669]
30.00 [762] ref
36.95 [939]
MONITOR MOUNTS IN CONSOLE WITH 18" DEEP WORKSURFACE
25.05 [636]
28.47 [723]
NOTE(S):
6.55 [166]
17.92 [455]
3.22 [82]
7.06 [179]
TOP VIEW
horizontal range
arm fold
TOP VIEW
6.69 [170]
1) HORIZONTAL RANGE...................16" 2) POLE HEIGHT................................28" 3) MONITOR TILT...............................200˚ 4) MONITOR PIVOT...........................LANDSCAPE TO PORTRAIT 5) MONITOR COMPATIBILITY...........VESA 75MM AND 100MM 6) MONITOR WEIGHT.......................UP TO 21LBS PER MONITOR
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
to center of mtg plate 5.43 [138]
max height extended to center of mtg plate 11.944 [303.38]
mount retracted in highest position
lowest position in console with worksurface
MONITOR MOUNTS IN CONSOLE WITH 34" DEEP DESKTOP
ViewPoint™ Dual Horizontal Monitor Mount
4.85 [123]
All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]
5.43 [138]
30.00 [762] ref
36.95 [939]
MONITOR MOUNTS IN CONSOLE WITH 18" DEEP WORKSURFACE
lowest position in console w/desktop
NOTE(S):
3.22 [82]
18.07 [459]
7.06 [179]
7.06 [179]
TOP VIEW
horizontal range
SIDE VIEW
1) HORIZONTAL RANGE...............17.5"
2) POLE HEIGHT............................12"
3) MONITOR TILT............................200˚
12.59 [320]
4) MONITOR PIVOT........................LANDSCAPE TO PORTRAIT
5) MONITOR COMPATIBILITY........VESA 75MM AND 100MM
6) MONITOR WEIGHT....................UP TO 25LBS PER MONITOR
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
max height to center of mtg plate 13.97 [355]
MONITOR MOUNTS IN CONSOLE WITH 34" DEEP DESKTOP
ViewPoint™ Triple Horizontal Monitor Mount
to center of mtg plate 9.00 [229]
All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]
30.00 [762] ref
36.95 [939]
MONITOR MOUNTS IN CONSOLE WITH 18" DEEP WORKSURFACE
NOTE(S): 1) SUSPEND UP TO 3 MONITORS ABOVE DESK. 2) INCLUDES CABLE MANAGEMENT 3) QUICK AND SIMPLE SET-UP POSITION MONITORS AT ANY POINT ALONG CENTER BEAM 4) COMPATIBLE WITH ALL VESA MOUNTS 75MM AND 100MM. 75MM AND 100MM ADAPTERS INCLUDED. 5) ADJUST MONITOR HEIGHT IN 1" INCREMENTS. 6) SUPPORTS MONITORS UP TO 30LBS.
3.22 [82]
7.75 [197]
TOP VIEW
SIDE VIEW
48.25 [1226]
3.50 [89]
12.60 [320]
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
4.85 [123]
mount retracted in highest position
lowest position in console with worksurface
MONITOR MOUNTS IN CONSOLE WITH 34" DEEP DESKTOP
to center of mtg plate 5.43 [138]
max height extended to center of mtg plate 27.94 [710]
All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]
ViewPoint™ Quadruple Monitor Mount, Two Rows of Two
5.43 [138]
30.00 [762] ref
36.95 [939]
MONITOR MOUNTS IN CONSOLE WITH 18" DEEP WORKSURFACE
lowest position in console w/desktop
NOTE(S):
3.22 [82]
7.06 [179]
18.07 [459]
7.06 [179]
TOP VIEW
SIDE VIEW
1) HORIZONTAL RANGE...................17.5"
2) POLE HEIGHT................................28"
3) MONITOR TILT...............................200˚
28.59 [726]
4) MONITOR PIVOT............................LANDSCAPE TO PORTRAIT
5) MONITOR COMPATIBILITY............VESA 75MM AND 100MM
6) MONITOR WEIGHT........................UP TO 22LBS PER MONITOR
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
to center of mtg plate 3.67 [93]
max height extended to center of mtg plate 14.95 [380] mount retracted in highest position
lowest position in console with worksurface 30.00 [762] ref
lowest position in console w/desktop
36.95 [939]
mount retracted in highest position
MONITOR MOUNTS IN CONSOLE WITH 34" DEEP DESKTOP
NOTE(S): 1) ALL DIMENSIONS ARE IN FORMAT OF IN [MM]. 2) ROTATION...............................................360˚ AT THREE JOINTS 3) MONITOR TILT........................................200˚ 4) MONITOR PIVOT.....................................LANDSCAPE TO PORTRAIT 6) MONITOR COMPATIBILITY.....................VESA 75MM AND 100MM 7) CABLE MANAGMENT..............................CABLES ARE CONCEALED IN ARM 8) MONITOR WEIGHT/MODEL NUMBER.....9-21 LBS/VC-MM1X2PL
to center of mtg plate 10.71 [272]
ViewPoint™ Dual Monitor Mount, Horizontal or Vertical
max height extended to center of mtg plate 14.95 [380]
30.00 [762] ref
36.95 [939]
23.40 [594]
26.41 [671]
MONITOR MOUNTS IN CONSOLE WITH 18" DEEP WORKSURFACE usable slot width 5.00" [127]
2.50 [64]
9.22 [234]
7.7 [195]
26.67 [677]
15.14 [385]
TOP VIEW
horizontal range
4.26 [108]
17.30 [439.4]
arm fold
TOP VIEW
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
max height to center of mtg plate 25.98 [660]
All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]
to center of mtg plate 9.00 [229]
MONITOR MOUNTS IN CONSOLE WITH 34" DEEP DESKTOP
ViewPoint™ Monitor Mount, Two Rows of Three
30.00 [762] ref
36.95 [939]
MONITOR MOUNTS IN CONSOLE WITH 18" DEEP WORKSURFACE NOTE(S):
1) SUSPEND UP TO 6 MONITORS ABOVE DESK. 2) INCLUDES CABLE MANAGEMENT 3) QUICK AND SIMPLE SET-UP POSITION MONITORS AT ANY POINT ALONG CENTER BEAM 4) COMPATIBLE WITH VESA MOUNTS 75MM AND 100MM. 75MM AND 100MM ADAPTERS INCLUDED. 5) ADJUST MONITOR HEIGHT IN 1" INCREMENTS. 6) SUPPORTS MONITORS UP TO 25LBS.
3.22 [82]
7.75 [197]
3.50 [89]
24.60 [625]
48.25 [1226]
TOP VIEW
horizontal range
SIDE VIEW
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
