Transcript
Vinyl Wall Rack 750mm 2 Pack
1500mm 2 Pack
1820mm 2 Pack
1 1 5 10 10
1 1 5 10 10
1 1 5 10 10
Wall Bracket With Left Hand Fold Wall Bracket With Right Hand Fold 750mm Aluminium Bars With End Caps Mounting Screws Plastic Wall Plugs
Wall Bracket With Left Hand Fold Wall Bracket With Right Hand Fold 1500mm Aluminium Bars With End Caps Mounting Screws Plastic Wall Plugs
Wall Bracket With Left Hand Fold Wall Bracket With Right Hand Fold 1820mm Aluminium Bars With End Caps Mounting Screws Plastic Wall Plugs
750mm 4 Pack
1500mm 4 Pack
1820mm 4 Pack
2 2 14 20 20
2 2 14 20 20
2 2 14 20 20
Wall Brackets With Left Hand Fold Wall Brackets With Right Hand Fold 750mm Aluminium Bars With End Caps Mounting Screws Plastic Wall Plugs
Wall Brackets With Left Hand Fold Wall Brackets With Right Hand Fold 1500mm Aluminium Bars With End Caps Mounting Screws Plastic Wall Plugs
Wall Brackets With Left Hand Fold Wall Brackets With Right Hand Fold 1820mm Aluminium Bars With End Caps Mounting Screws Plastic Wall Plugs
750mm Extender Pack
1500mm Extender Pack
1820mm Extender Pack
1 4 5 5
1 4 5 5
1 4 5 5
Wall Bracket 750mm Aluminium Bars With End Caps Mounting Screws Plastic Wall Plugs
Wall Bracket 1500mm Aluminium Bars With End Caps Mounting Screws Plastic Wall Plugs
Wall Bracket 1820mm Aluminium Bars With End Caps Mounting Screws Plastic Wall Plugs
Instructions There are 2 different types of bracket in the pack.
Install the brackets on a suitable wall that is capable of holding the load using the masonry fixings that are included. In the table below the approximate load weight is calculated on 5 full 50 metre rolls of standard vinyl in the respective size on a 2 bracket installation. If you are extending a 2 bracket installation the load will obviously increase.
Kit Size
Bracket With Left Fold
750mm
1550mm
1820mm
Vinyl Roll Width
610mm
1220mm
1524mm
Approximate Load
36Kgs
66Kgs
78Kgs
Distance between brackets*
690-710mm
1380-1420mm
1650-1720mm
Bracket With Right Fold
The bracket with the right hand fold is designed to be used on the left and the left hand fold is the bracket for the right hand side so when installed the screw fixings are behind the vinyl rolls.
Mount one bracket first ensuring that it is vertically and horizontally straight using a spirit level (not included). Then use this as a guide to mount the next bracket ensuring that it is straight and level in relation to the first bracket.
This kit includes mounting screws and plastic wall plugs for masonry. You will require a 6mm masonry drill bit (not included).
*Distance between bracket is measured from the outer edge to the outer edge (eg. the part of the bracket that holds the vinyl)
Example Configuration Of A 2 Bracket Kit
Example Configuration Of A 4 Bracket Kit
This gives you a minimum storage capacity of 5 full 50 metre rolls of vinyl. By adding more bars (available separately) you can store up to 9 part rolls, depending on the core diameter.
This gives you a storage capacity of 14 full 50 metre rolls of vinyl.
Remember that with a 4 bracket configuration the load weight will increase proportionally so ensure that the wall is capable of taking the load. Manufactured In The UK MDP Supplies Lumina Park, Martindale Road, Bromborough, Wirral, CH62 3PT. United Kingdom
Call: 0151 272 1234
Web: www.mdpsupplies.co.uk ©MDP Supplies 2015
