Transcript
VIP-TX High-quality multi-codec video server with integrated Automatic Incident Detection (AID) and Traffic Data Collection (TDC) The VIP-TX solution combines field-proven incident detection and traffic data algorithms with advanced video encoding and powerful processing technology in a single housing. The VIP-TX network video encoder provides embedded analytics as well as multi-stream and multi-codec encoding in a single temperature-hardened module. This combination of technologies makes for a very cost-effective solution which at the same time delivers top level performance. VIP-TX advanced processing unit generates traffic data and incident detection information to support traffic operators with alerts on stopped vehicles, wrong-way drivers, pedestrians, lost cargo, smoke, and traffic flow data.
Powerful video encoding The versatile VIP-TX is capable of streaming three IP video streams simultaneously using H.264, MPEG-4, MPEG-2 or MJPEG video compression standards. All streams are individually configurable, up to full D1 resolution (720x576) and full framerate Automatic Incident Detection VIP-TX generates a broad range of incident alarms by analyzing the incoming images. The required functionality such as alert for stopped vehicle, wrong-way driver, pedestrians, lost cargo, smoke and traffic flow data can be selected to accommodate any traffic application. Fiber option The TrafficServer™ is available with an optional pluggable SFP slot for direct fiber connections. The XSNet range of SFP devices offers a variety of multi-mode or single-mode fibre solutions that suits a large range of deployment distances.
WWW.TRAFICON.COM
Traffic data Retrieving accurate traffic data is essential for traffic flow management. VIP-TX performs specific measurements with relation to traffic flow management next to to the AID analytics. It provides real-time information on volume, speed, classification, gap-time, etc. This information can also be visualized as an overlay in the image, giving the operator a clear view on the traffic situation. Audio, I/O and analog output By combining streaming video with duplex audio and I/O contacts control over IP, the VIP-TX system provides all the interfaces necessary for demanding applications. The serial interface supports most common PTZ communication protocols. ONVIF compliant Compliance with the ONVIF profile S standard assures smooth integration with third-party video management systems, video recorders and other peripherals.
VIP-TX technical specifications
VIDEO Number of channels Input level Compression algorithms
1x PAL/NTSC (Auto/PAL/NTSC) 1Vpp (±3dB)) H.264BP (ISO/IEC 14496-10) MPEG-2 (ISO/IEC 13818-2), MJPEG,MPEG-4 (ISO/IEC 14496-2, ISMA comp.) Types of streaming UDP/IP (multicast and/or unicast) Number of output streams Up to 20 Input impedance 75Ω/Hi-Z selectable Video motion detection Yes (user-defined masking) Encoding latency < 130 ms Resolution D1, 2/3D1, ½D1, 2CIF, CIF, QCIF, VGA GOP structure I, IP (selectable/user profiles) Frame rate 1 to 30 fps Triple streaming D1 at 30fps H.264 (example with 100% DSP + D1 at 30fps MPEG-2 (GOP=1) capacity) + 2/3 D1 at 30fps MPEG-4 Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles) Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size) 1x image in BMP, GIF, or JPEG format (configurable: position, scaling), AID overlay Live-view encoder HTTP, FTP pull Connector type 75Ω BNC (gold-plated centre pin) DATA Number of channels 2 full-duplex Number of streams 2 x 3 (multicast and/or unicast) Interface(s) 1x RS-232, 1x RS-422/485 (2- or 4-wire) Types of streaming TCP/UDP configurable Data rate 300b/s to 230.4kb/s Connector type RJ-45 CONTACT CLOSURES Number of channels 2x in, 2x out Number of streams 2 x 3 (multicast and/or unicast) Output Fail-safe, potential-free Connector type RJ-45 TRANSMISSION INTERFACE Number of interfaces 1 Interface(s) 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex, 10/100Mb SFP option Empty SFP slot for 100Mbps SFP device Protocols H.264 BP, MPEG-4 ES, MPEG-2 TS, MPEG2 ES, (M)JPEG, RTP, RTCP, RTSP, TCP, UDP, IP, DHCP, IGMPv2, (S)NTP, MX/ IP, HTTP, SNMP v2, FTP, TelNet, DiffServ, SAP, UPnP Connector type RJ-45
WWW.TRAFICON.COM
AUDIO Number of channels 2 full-duplex stereo Number of streams 3 (multicast and/or unicast) Maximum bandwidth 20Hz to 20kHz Sampling resolution 8/16-bit linear PCM or G.711 Input level Adjustable, mic or line Output level Adjustable, 3Vrms maximum Input impedance >20kΩ or 600Ω, single-ended Output impedance <100Ω, single-ended Connector type RJ-45 EMBEDDED AUTOMATIC INCIDENT DETECTION Stopped vehicle 16 stop zones Inverse direction 8 zones Speed drop 8 zones Levels of service Normal, dense, delayed, congested, stop and go (8 zones) Pedestrian 16 zones Debris/fallen object 16 zones Smoke Only for tunnel applications TRAFFIC DATA COLLECTION Individual vehicle data Timestamp Lane Number Individual speed Classification Gap time Length Confidence Integrated traffic data Volume Per class per lane, max 8 lanes Average speed Per class per lane Headway Yes Gap time Per length class per lane Occupancy Per lane Density Per lane, number of vehicles/km Average length Per lane POWER Power consumption < 5W Rack-mount units 115V or 230 V AC racks Stand-alone units 11 to 19 V DC ENVIRONMENTAL MTBF > 200.000 hours Operating temperature Continuous -40°C to +74°C (-40°F to +165°F) Relative humidity <95% with no condensation Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN 55022, FCC part 15 Mechanical Dimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5 in) Weight 450 g Housing Rack-mount or stand-alone
Dimensions
128 mm
128.4 mm
117.4 mm Ø 4.2 mm
187 mm
172 mm
38.1 mm
35.5 mm
Rackmount version
9.9 mm
204.9 mm
Standalone version
Fiber option VIP-TX can connect to networks over standard RJ45 copper wire or over optical fiber by using SFP modules or via existing coax cabling by using the ECO SFP plug. ECO PLUG SPECIFICATIONS Interface Small Form-Factor Pluggable (SFP) MultiSource Agreement (MSA) –compliant Power consumption 0.7 W Connector type 1.0 / 2.3 DIN female 75Ω Cable impedance 75 Ω typical Data throughput 100 Mbps full-duplex Operating temperature -25°C to +60°C (-13°F to 140°F) Relative humidity 5% to 95% non-condensing Cable accessory 1.0 /2.3 DIN male to BNC female 40 cm ECO PLUG CABLE compatibility Type Maximum distance RG59 gauge 23 150 – 200 m (500 – 650 ft) RG59 gauge 20 270 – 300 m (900 – 1000 ft) RG6 gauge 18 400 – 500 m (1300 – 1600 ft) RG11 gauge 14 500 – 600 m (1600 – 2000 ft) RG11 low loss gauge 14 600 – 720 m (2000 – 2300 ft) SFP INTERFACES GENERIC SPECIFICATIONS Interface Small Form-Factor Pluggable (SFP) MultiSource Agreement (MSA) –compliant Operating temperature -40°C to +74°C (-40°F to +165°F) Storage temperature -55°C to + 85°C (-67°F to +185°F) Relative humidity < 95% non-condensing OPTICAL SFP Fiber type Optical return loss Output wavelength System link budget Output power Input sensitivity Connector type Ethernet
MM/850 2 x SM > 14 dB 850 nm 7.5 dB -9.5 to -4 dBm -17 dBm Dual LC 100/1000 Mbps
WWW.TRAFICON.COM
MM/1310 2 x SM > 14 dB 1310 nm 12 dB -14 to -20 dBm -32 dBm Dual LC 100/1000 Mbps
SM/10 2 x SM > 25 dB 1310 nm 10.5 dB -9 to -3 dBm -22 dBm Dual LC 100/1000 Mbps
SM/60 2 x SM > 45 dB 1550 nm 18 dB -5 to -3 dBm -23 dBm Dual LC 100/1000 Mbps
SM BidiA/ BidiB 1 x SM > 45 dB 1310 nm / 1490 nm 13 dB -9 to 3dBm -22 dBm SC 100/1000 Mbps
Power supply cabinets The 19” rack-mountable housings can house 10 or 11 VIP-TX modules, depending on the optional use of a redundant power supply module. All connections are concentrated on one side for easy cabling. Reversible mounting brackets give you the choice to have all connections at the front or at the back. The racks are available in 115 or 230 VAC and 24V DC power versions. ENVIRONMENTAL Operating temperature Storage temperature Relative humidity MTBF Safety and EMC MECHANICAL Dimensions Weight
-40°C to +65°C (-40°F to +149°F) -55°C to +85°C (-67°F to +185°F) <95% with no condensation >100,000 hours IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15 132 x 483 x 240mm (5.2 x 19.02 x 9.45in), without cabling 132 x 483 x 350mm (5.2 x 19.02 x 13.78in), with cabling 4.5 kg (9.92 lbs)
POWER Mains voltage Operating voltage Frequency Maximum drop-out time Primary fuse Power efficiency (full load) DC output power DC input current
AC-230 230 V AC 40 – 100 Hz 10 ms 1.6A / 250V slow ~ 83% 83W (at 74°C ambient) 105W (at 65°C ambient) -
AC-115 115 V AC 40 – 100 Hz 10 ms 3.16A 250 V slow >83% 83W (at 74°C ambient) 105W (at 65°C ambient) -
DC 24 V DC nominal 15 to 30 V DC >95% 83W max (at 74°C ambient) 110W (at 65°C ambient) 5A at 24 V DC 8A at 15 V DC
Software All traffic data, events, alarms and video sequences generated by the VIP-TX are sent to the Traficon Management System, called Flux. The Flux server stores all information in a relational database. Real-time information is available anywhere on the network. Besides a pure server and storage function, Flux also provides extra functions such as data and event reporting, real-time monitoring through an intuitive user interface, event filtering and scenario building ( = management of different configurations subject to changes in the traffic situation). The open architecture of the VIP/Flux system allows an easy integration into any larger traffic management system. Flux has options for video wall functionality, video recording, streaming video server function, email notification, OPC- and other interfaces. Multiple servers can be deployed to provide scalability for large installations and/or critical redundancy. Contact:
Your local dealer:
Traficon is now a FLIR company Vlamingstraat 19, B-8560 Wevelgem, Belgium tel +32 (0)56 37.22.00 – fax +32 (0)56 37.21.96
[email protected] – www.traficon.com Author: EVM Version: 28 March 2013
WWW.TRAFICON.COM
Specifications are subject to change without notice. Sizes and weights are indicative
