Transcript
VIPEDIA-12 Professional Sound Life-Safety Digital Audio System
The VIPEDIA is an expandable Pro-Sound quality 1U IP Voice Alarm Audio Router which provides up to twelve analogue audio inputs and twelve outputs, together with multiple Ethernet IP ports and ASL Intellevac safety audio networking. The VIPEDIA allows for local routing of any combination of its 12 analogue audio inputs to any combination of the 12 outputs, while up to three VIPEDIA routers can be linked by a high speed digital routing bus1 to provide simultaneous routing from any or all of their analogue inputs to outputs. The built in IP networking enables the VIPEDIA to offer audio routing and control over IP, thus extending the system’s audio matrix across the IP Network. The IP networking can use existing site IP infrastructure or can be constructed as a standalone Cat5 or fibre ring2. Connecting pairs of VIPEDIAs at each PA Node enables full dual redundant synchronised ‘A’ and ‘B’ VA systems to be constructed. All 12 analogue audio inputs use individual RJ45 general purpose audio and microphone connection ports, which provide straight through connections to ASL microphones. The VIPEDIA’s advanced energy management functions include automatically powering down unused functions, such as removing power from paging microphones during out of hours periods. Two of the microphone inputs have hardware bypass capability to provide continued emergency operation even if the VIPEDIA CPU has failed, and these inputs are also compatible with ASL Intellevac safety networks. The full analogue and digital audio signal path is of Pro-Sound quality, enabling the VIPEDIA to meet very high quality audio requirements, and Pro-Sound IP networking is provided by means of an Audinate DanteTM interface module, which can be fitted as an addition to the standard ASL VIPA PMC VoIP protocol. The VIPEDIA’s standard DSP engine provides powerful audio functions, including dynamic input processing and individually adjustable digital output delay and parametric equalisation, while the optional MIX-DSP module adds channel mixing functions. The optional VIPA module adds functions from ASL’s VIPA software suite, including huge DVA storage, and broadcast scheduling. This module also provides more Ethernet ports, and allows spare microphone port RS485 data busses to control and monitor third party equipment, with the VIPEDIA acting as an IP terminal server. The VIPEDIA can control and monitor up to 64 ASL amplifier mainframes and their associated amplifier modules and loudspeaker circuits. Other VIPEDIA interfaces include 12 combined digital and analogue contact inputs, 12 digital outputs, and two fault relay outputs. One of the RJ45 connectors includes all signals required for a standard fire panel interface. The microphone ports also provide Dynamic Ambient Noise Sensor (DANS) connections3, while standard ANS sensors can be connected via BMB01 Remote I/O units, which also provide analogue and digital I/O contact expansion. A RS232 host control port enables interfacing to legacy third party PC/DVA or site control systems. The front panel display and keys provide all EN54-16 mandatory indicators and controls, together with basic setup, and built in debug and fault reporting information. Configuration is carried out over Ethernet or via the front panel USB port. For further details, and for information on other products, please visit www.asl-control.co.uk.
1 2 3
A local matrix of multiple VIPEDIA routers requires the Master VIPEDIA router to be fitted with the internal MIX-DSP module. External IP fibre adaptor switches required for fibre networking. The internal MIX-DSP module needs to be fitted to enable the use of Dynamic Ambient Noise Sensors (DANS).
Product Overview ASL Document Ref.: Product_Overview_VIPEDIA-12.doc Issue: Draft 03 Complete, Needs review - Date: 4/04/2011
SPECIFICATION General
Audio Performance
Power Supply Inputs ...................................... Dual 18 to 26V DC Current Consumption (Max.) .................... 2.0A @ 24V DC supply Plus Audio Input / Mic Ports Peripheral Power Load IP Network Connectivity ............................... 100baseT Ethernet Standard ...................................................................2 Ports With VIPA Option Module...........................................4 Ports Built In Monitored DVA Storage ............................8 x 60 second Front Panel ................................................ EN54-16 Compliant LCD Display and Buttons.................................................... 1 Fault Reporting & Status Display plus Audio Monitoring USB OTG ............................................................................ 1 DVA Download & Laptop Configuration Port Fault Log ..................................................................200 Events Real Time Clock ................. Built In (Externally Synchronisable)
Audio - General Digital Audio I/O ............................................. 24 bits 48 kHz Internal and Expansion Bus ...........32 bits floating point THD Input to Output ..................................... 0.01% @1 kHz Crosstalk ......................................................70 dB @1 kHz Residual Noise ................................................. <90 dBu (A) Frequency Response...................... 20Hz to 20kHz +/- 0.5dB Audio Input Channels - Analogue Input Sensitivity ................................. 0 / -20 / -40 / -60 dBu Input Overload .......................................................... +20 dB Input Trim ................................... +10 to –90 dB (1 dB steps) Mute......................................................................Click free Surveillance Tone Detection Frequency Range........................................ 20 Hz-30 Hz Level.............................................................-64 to 0 dB Switchable High-Pass Filter............. 20 - 500 Hz / 12 dB/oct 4 band parametric EQ / Gate / Compressor / Peak Limiter .. All with settable parameters & on/off bypass switch Chime Generator.... OFF / 1-note / 2-note / 3-note / Custom Audio Output Channels - Analogue Nominal Output Level ............................................... 18 dBu Output Impedance.......................................................200 Mixing ........................ Up to 16 simultaneous input sources With MIX-DSP Module Master Level ................................+10 to -90 dB (1 dB steps) Night Volume Control..........................................All outputs Output Mute ..........................................................Click free Delay......................................... 1 ms –1000 ms (1ms steps) 10 band parametric EQ ........................................................ With settable parameters & on/off bypass switch Hard Limiter ........................................................2 - 20 dBu LF Surveillance Tone Generator ........ 30 Hz / 10 to -60 dBu HF Surveillance Tone Generator ....... 20 kHz / 10 to -60 dBu Ambient Noise Sensing Gain Adjustment ............-40 to 0 dB
Audio Inputs and Outputs Audio Input Channels - Analogue .................................. 12 ports Monitored Universal Mic / Line / DANS audio inputs Hardware Bypass Fire Microphone Inputs ...............2 ports With Mixed Listen In monitoring audio output Green Economy power shutdown capability ..............8 ports Phantom Power ........................................................8 ports With VIPA Option Module RS485 Terminal Server capability................All 12 ports Audio Output Channels - Analogue................................ 12 ports Dual monitored & isolated A and B audio output channels Audio I/O Channels – IP Simultaneous IP Audio Matrix Inputs and Outputs Standard VIPEDIA ........................................................ 2 With VIPA Module ...................................................... 12 With DanteTM Module ................................................. 64 IP Audio Protocol Standard......................................................... ASL PMC With DanteTM Option Module ...............Audinate Dante™
Environmental General Purpose I/O Interfaces Combined digital and analogue contact inputs ....................... 12 PA routing / fault inputs / ANS inputs / SCADA status inputs Opto-isolated digital / 0V referenced analogue Digital contact outputs ....................................12 open collector PA zone busy / fault outputs / SCADA control outputs BMB01 Remote I/O Unit RS485 Interfaces ............................... 1 Connectivity for up to six BMB01 remote I/O units Legacy Control / PC/DVA RS232 Host Port ............................... 1 Fault Relays ..... One c/o (change over), one n/o (normally open)
Temperature Range Storage ........................................................ -20°C to 55°C Operating ..................................................... -10°C to 55°C Humidity Range............................... 0% to 95% non-condensing Ingress Protection...............................................................IP20 Dimensions and Weight Dimensions (H x W x D ...................... 44mm x 436mm x 395mm (excluding handles ) / 1U height, 19” rack mount Weight.............................................................................. 4.5 kg
NOTE : PROVISIONAL INFORMATION ONLY Note: Audinate® is a registered trademark of Audinate Pty Ltd. Dante™ is a trademark of Audinate Pty Ltd.
This equipment is designed and manufactured to conform to the following EC standards: EMC:
EN55103-1/E1, EN55103-2/E5, EN50121-4, ENV50204
Safety: EN60065 Manufacturer Application Solutions (Safety and Security) Limited Unit 17 - Cliffe Industrial Estate - Lewes - East Sussex - BN8 6JL - U.K. Tel: +44(0)1273 405411 Fax: +44(0)1273 405415 www.asl-control.co.uk All rights reserved. Information contained in this document is believed to be accurate, however no representation or warranty is given and Application Solutions (Safety and Security) Limited assumes no liability with respect to the accuracy of such information. VIPEDIA-12 Professional Sound Life-Safety Digital Audio System- Issue Draft 03 Page 2 of 2
