Transcript
Velocitykvm-34
Each Thinklogical™ Velocitykvm-34 Multi-Mode Fiber Optic System consists of a transmitter unit and a receiver unit connected by five multimode fiber optic cables. The transmitter unit connects to the computer with standard cables and the receiver unit provides connections to the user interface devices. The Velocitykvm-34 supports PS/2, full duplex stereo audio, serial (RS-232), USB 1.0 (HID) device ports and USB 1.1. USB 2.0 (high speed up to 480Mbps) is optional.
Multi-Mode Fiber Extension – Four DVI Displays
Multi-Mode Fiber-Optic Cable Guide:
QUICK START GUIDE STEP 9: Turn on the Source (CPU) last. Verify that all system features are functioning properly.
7
L1: Data Tx to Rx and Video 1 L2: Data Rx to Tx L3: Video 2 L4: Video 3 L5: Video 4 Local USB HID Connectors
VelocityKVM-34 Transmitter L1 PWR
9
L3
L2
L4
8
Local PS/2 Connectors
SER IAL PORT
LINE IN
DVI IN 4
MIC OUT
CP CLINK
DVI IN 2
DVI IN 3
UPDATES
P S 2
HID
HOST
U S B 1 .1
LOCAL
FROM CPU
DEV
USB HID
CNTRL 100-240V-,0.5A, 50/60 Hz
USB 2.0 Audio OUT► Audio IN◄ PS/2 Keyboard PS/2 Mouse USB HID (Kybd/Mouse) USB 1.1 (Kybd/Mouse)
5 3 6
L2
L1
L3
▲ Audio OUT Audio IN►
4 L1
L2 PWR
PS/2 Kybd/ Mouse
L5
L4
STEP 6: Four DVI-D cables (CBL-000009-002MR) are included. Connect one each to the CPU’s DVI 1, 2, 3 and 4 Video Cards and the other ends to the VelocityKVM Transmitter’s DVI IN 1, 2, 3 and 4 ports.
Note: Be sure to leave adequate ventilation space on both sides of the units (2” minimum), especially if the units are being stacked
USB 1.1
5
STEP 1: Ensure that the POWER ON/OFF switch is in the OFF position (0) on both the Tx and Rx units. Connect the supplied AC Power Cords to both units and plug them into a standard AC supply. LEAVE BOTH SWITCHES IN THE OFF POSITION.
VelocityKVM-34 Receiver
L5 SER IAL PORT
DVI OUT 1
1
STEP 5: Connect your KVM devices to the CPU using the cables supplied in KIT-000005-R.
STEP 4: Connect your Multi-Mode Fiber Optic cables between the Transmitter and Receiver units. Connect: L1/Tx to L1/Rx, L2/Tx to L2/Rx, L3/Tx to L3/Rx, L4/Tx to L4Rx and L5/Tx to L5/Rx.
FOL
USB 2.0
USB HID
DVI OUT4
DVI OUT 3
DVI OUT 2
P S 2
LINE OUT MIC IN
USB HID
U S B 1 .1
U P D HOST A T E S CNTRL 100-240V-,0.5A, 50/60 Hz
PS/2 or USB connectors
CONTENTS Upon receiving your ThinklogicalTM Velocitykvm-34 Extender, you should find the following items: VelocityKVM Extender Transmitter VelocityKVM Extender Receiver 2 AC power cords, PWR-000006-R (International connections may differ.) VelocityKVM Extender Cables: 4 DVI-D Male Cables, 2 meters, CBL-000009-002MR 1 Cable Kit (8 six ft. peripheral cables.) KIT-000005-R VelocityKVM Extender Product Manual
DVI Display 1
T 2A ,250VAC
CAUTION! Replace with same type and rating fuse.
L3
L4
STEP 8: Turn the Transmitter unit ON (1).
CAUTION! Replace with same type and rating fuse.
L5
FOL
DVI IN 1
STEP 7: If desired, connect your local keyboard and mouse by inserting the PS/2 or USB HID connectors into the VelocityKVM Transmitter’s local devices receptacles.
2
3
4
2 STEP 2: Connect your desktop devices (monitors, keyboard, mouse, etc.) to the Receiver using standard cables.
RACK-MOUNT OR DESK-TOP OPTIONS: Like all ™ KVM extenders, the VelocityKVM-34 can be mounted in a standard EIA 19" rack or on a shelf or desk-top.
T 2A ,250VAC
3
STEP 3: Turn the Receiver unit ON (1).
8 Mounting bracket screws
Velocitykvm-34 Fo ur Head S in gle Link Fiber Opt ic Tran smitt er
Each mounting bracket is secured by four screws and can be safely removed from the transmitter or receiver unit for desk-top mounting after power has been removed from the unit.
All physical connections to the product use industry-standard connectors. VELOCITY-34_Quick_Start_Rev_C
PHONE: WEBSITE: EMAIL:
(800) 291-3211 www.thinklogical.com
[email protected]
Visit us online at www.thinklogical.com for more product information, current updates and the complete line of Thinklogical™ products.
Copyright c 2009. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
2 Mounting bracket screws in four places.
