Vision™ Oplc

Transcript

Vision™ OPLC™ Economy model, PLC + 5,7” color display Technical Specifications Models V570-57-T20B, V570-57-T40B This guide provides specifications for Unitronics’ color touchscreen controllers V570-57-T20B and V570-57-T40B. Technical Specifications Power Supply Input voltage Permissible range Max. current consumption V200-18-E2B V570-57-T20B 24VDC 20.4 VDC to 28.8VDC with less than 10% ripple V570-57-T20B V570-57-T40B 270mA@24V 320mA@24V Battery Back-up Replaceable 7 years typical at 25°C, battery back-up for RTC and system data, including variable data. Yes, without opening the controller. Graphic Display Screen LCD Type Illumination backlight Display resolution, pixels Viewing area Colors Touchscreen ‘Touch’ indication Screen brightness Keypad V570-57-T20B V570-57-T40B TFT TFT White LED CCFL fluorescent lamp 320x240 (QVGA) 5.7” 256 Resistive, analog Via buzzer Via software (Store value to SI 9). Displays virtual keyboard when the application requires data entry. Program Memory size Operand type Memory Bits Memory Integers Long Integers Double Word Memory Floats Timers Counters Data Tables HMI displays Program scan time Application Logic – 2MB, Images – 6MB, Fonts – 1MB Quantity Symbol Value 8192 MB Bit (coil) 4096 MI 16-bit 512 ML 32-bit 256 DW 32-bit unsigned 64 MF 32-bit 384 T 32-bit 32 C 16-bit 120K dynamic data (recipe parameters, datalogs, etc.) 192K fixed data (read-only data, ingredient names, etc) Up to 1024 9 µsec per 1K of typical application Removable Memory SD card File system User must format via Unitronics SD tools utility. See Note 1 Notes: 1. The SD memory card slot uses the PC-compatible FAT32 file system. User can store datalogs, Alarm history, Data Tables, backup Ladder, HMI, and OS, up to 2GB. www.klinkmann.com Vision™ OPLC™ Communication Serial ports RS232 Galvanic isolation Voltage limits Baud rate range Cable length RS485 Galvanic isolation Voltage limits Baud rate range Nodes Cable type Cable length CANbus port Nodes Power requirements Galvanic isolation Cable length/baud rate 2. See Note 2 Yes ±20VDC absolute maximum 300 to 115200 bps Up to 15m (50’) Yes −7 to +12VDC differential maximum 300 to 115200 bps Up to 32 Shielded twisted pair, in compliance with EIA RS485 1200m maximum (4000’) 1 CANopen Unitronics’ CANbus protocols 127 60 24VDC (±4%), 40mA max. per unit Yes, between CANbus and controller 25 m 1 Mbit/s 100 m 500 Kbit/s 250 m 250 Kbit/s 500 m 125 Kbit/s 500 m 100 Kbit/s 1000 m* 50 Kbit/s 1000 m* 20 Kbit/s * If you require cable lengths over 500 meters, contact technical support. User may install a single Ethernet port, or an RS232/RS485 port. Available by separate order. Optional port Notes: 2. The standard for each port is set to either RS232/RS485 according to DIP switch settings. Refer to the Installation Guide. I/Os Snap-in I/O modules Expansion modules Exp. port isolation Number of I/Os and types vary according to module. Supports up to 512 digital, high-speed, and analog I/Os. Plugs into rear port to create self-contained PLC with up to 43 I/Os. Local adapter (P.N. EX-A1), via I/O Expansion Port. Integrate up to 8 I/O Expansion Modules comprising up to 128 additional I/Os. Remote adapter (P.N. EX-RC1), via CANbus port. Connect up to 60 adapters; connect up to 8 I/O expansion modules to each adapter. Galvanic Dimensions Size 197X146.6X68.5mm “ 7.75 ( X “ 5.77 X2.7”). See Note 3 Weight 750 gm (26.4 oz) Notes: 3. For exact dimensions, refer to the product’s Installation Guide. Mounting Panel-mounting Via brackets Environment Inside cabinet Panel mounted Operational temperature Storage temperature Relative Humidity (RH) IP20 / NEMA1 (case) IP65 / NEMA4X (front panel) 0 to 50ºC (32 to 122ºF) -20 to 60ºC (-4 to 140ºF) 5% to 95% (non-condensing) www.klinkmann.com I/O Expansion Modules Expand your system with local or remote I/O expansion modules1. Vision series support both local & remote I/O modules. M90/M912 support local modules only. Digital Modules IO-DI8-TO8 IO-DI8-RO4 IO-DI8-RO8 EX90-DI8-RO83 IO-DI16 24VDC 8 Digital Inputs, pnp/npn, including one High-speed Counter 8 pnp Transistor Outputs 24VDC 8 Digital Inputs, pnp/npn, including one High-speed Counter 4 Relay Outputs 24VDC 8 Digital Inputs, pnp/npn, including one High-speed Counter 8 Relay Outputs 24VDC 8 Digital Inputs, pnp, including one High-speed Counter 8 Relay Outputs 24VDC 16 Digital Inputs, pnp/npn, including one High-speed Counter IO-TO16 IO-RO8 IO-RO16 IO-DI8ACH 12/24VDC 16 pnp Transistor Outputs 24VDC (power supply) 8 Relay Outputs 24VDC (power supply) 16 Relay Outputs 110/220 VAC 8 AC Inputs Analog, Temperature and Weight/Strain Measurements XL Digital/Analog Modules IO-AI4-AO2 IO-PT400 IO-PT4K 24VDC (power supply) 4 Analog Inputs, 12 bit, 0-10V, 0-20mA, 4-20mA, 2 Analog Outputs 12 bit+sign, ± 10V, 0-20mA, 4-20mA 4 PT100/NI100/NI120 Inputs Range PT100: -50°C...460°C (-58°F...860°F) Range NI100: -50°C...232°C (-58°F...449°F) Range NI120: -50°C...172°C (-58°F...341°F) 12 bit 4 PT1000/NI1000 Inputs Range PT1000: -50°C...460°C (-58°F...860°F) Range NI1000: -50°C...232°C (-58°F...449°F) 12 bit IO-AO6X IO-LC14 24VDC (power supply) 6 Isolated Analog Outputs, 0-10V, 0-20mA, 4-50mA, 12 bit IO-D16A3-RO165 24VDC 16 Digital Inputs, pnp/npn, including two High-speed Counters 3 Analog Inputs 10 bit, 0-20mA, 4-20mA, 16 Relay Outputs New! IO-ATC8 IO-D16A3-TO165 8 Thermocouple/Analog Inputs, T/C J, K, T, B, E, N, R, S, 0.10 Resolution, 0-10V, 0-20mA, 4-20mA, 12/14 bit 24VDC 16 Digital Inputs pnp/npn, including one New! High-speed Counter 3 Analog Inputs 10 bit, 0-20mA, 4-20mA 15 pnp + 1 pnp/npn Transistor Outputs including 1 HSO IO-LC34 12/24VDC (power supply) 1-3 Loadcell / Strain gauge Inputs Input voltage ranges: ±20mV, ±80mV Excitation: AC/DC 1 Digital pnp Input 2 Setpoint pnp Outputs CE/UL Not supported by all OPLCs™ Number of I/Os may vary according to module Except for M90-19-B1A 3 The EX90 is housed in an open casing. Only one EX90 can be connected per PLC, as a single expansion module; Expansion adapter not required 4 IO-LCx models are supported by the M91 & Vision series. Not supported by the M90 series. 5 XL expansion modules will be available in spring 2009. Not yet UL certified 6 EX-RC1 is supported by Vision series. Not supported by M91 series. Not yet UL certified. 1 I/O Expansion Module Adapters EX-A1 EX-RC16 Local I/O module adapter. Up to 8 modules may be connected to a single PLC1. Supports both 12/24 VDC. Remote I/O module adapter, via CANbus. Multiple adapters may be connected to a single PLC, with up to 8 modules to each adapter1. Supports both 12/24 VDC. 2 * Additional 12VDC models are listed on Unitronics web site. www.klinkmann.com I/O Expansion Modules Snap-in I/O Modules Plug a Snap-in module directly into the back of a Vision PLC. Compatible with all V200 & V500 (V2XX, V5XX) Vision models. New! V200-18-E1B V200-18-E2B V200-18-E3XB V200-18-E4XB V200-18-E5B V200-18-E6B1 16 isolated Digital Inputs (including 2 Shaft-encoder Inputs. 16 Isolated Digital Inputs (including 2 Shaft-encoder Inputs) 18 isolated Digital Inputs (including 2 Shaft-encoder Inputs) 18 isolated Digital Inputs (including 2 Shaft-encoder Inputs) 18 isolated Digital Inputs (including 2 Shaft-encoder Inputs) 18 isolated Digital Inputs (including 2 Shaft-encoder Inputs) 3 Analog Inputs 2 Analog Inputs 3 Analog Inputs 4 isolated Transistor Outputs (including 2 High-speed Outputs) 4 isolated Thermocouple/PT100/ Analog Inputs 3 Analog Inputs 4 isolated Transistor Outputs (including 2 High-speed Outputs) 4 isolated Thermocouple/PT100/ Analog Inputs 10 isolated Relay Outputs 17 isolated Transistor Outputs (including 2 High-speed Outputs) 2 Thermocouple/ PT100/Analog Inputs 10 isolated Relay Outputs 2 isolated Transistor Outputs (including 2 High-speed Outputs) 17 isolated Transistor Outputs (including 2 High-speed Outputs) 15 isolated Relay Outputs 4 isolated Analog Outputs 2 Analog Outputs 2 isolated Transistor Outputs (including 2 High-speed Outputs) 15 isolated Relay Outputs 4 isolated Analog Outputs 2 isolated Analog Outputs 1 V200-18-E6B is not yet UL certified Additional COM Module Use these modules to enhance Vision’s communication capabilities1 1 Ethernet port 1 RS232/RS485 port 1 isolated RS232/RS485 port 1 CANbus port V100-17-ET22 (for V130 & V350 Series) V100-17-RS42 (for V130 & V350 Series) V100-17-RS4X2 (for V130 & V350 Series) V100-17-CAN2 (for V130 & V350 Series) V200-19-ET1 (for V200 & V500 series) V200-19-RS4 (for V200 & V500 series) V200-19-RS4-X (for V200 & V500 series) 1 V200/V500: 1 optional port, V130/V350: 1 optional port for serial or Ethernet & 1 optional port for CANbus 2 V100-17-ET2, V100-17-RS4, V100-17-RS4X & V200-17-CAN are not yet UL certified www.klinkmann.com Koulutuskurssit Unitronics miniPLC+display Vision logiikat, ml. langattomat liitynnät PERUSKURSSIT SYKSY 2010 (1 pv 24.9, 29.10, 26.11) Klinkmann Automaatio järjestää Unitronics miniPLC+display logiikoista yhden päivän peruskurssia, jonka aikana käydään läpi logiikkamallit, laajennusyksiköt sekä tietoliikenne ml. GSM/GPRS/3G mobiiliverkko, ethernet, web-server, sarjaliikenne ja modbus yhteydet. Kurssi sopii kaikille Unitronics logiikoista ja langattomasta automaatiosta kiinnostuneille. Yli 4-henkilön ryhmille järjestämme myös asiakaskohtaista koulutusta. Kurssin ohjelma Aamukahvi ja esittely 09.00 Unitronics tuoteperhe. 09.30 Unitronics Ladder PC-logiikkaohjelmisto. Ohjelmointi, harjoituksia ja sovelluksen lataus logiikkaan. Lounas 12.00 Sovellusharjoitukset jatkuvat. 13.00 Unitronics näyttöjen konfigurointi PC:llä, harjoitus. Tietoliikenneyhteydet - GSM/GPRS modeemi (Siemens MC35iT) - ethernet ja internet Kauko-ohjelmointi ja sovelluksen etäkonfigurointi mobiiliverkon avulla. 15.00 Kurssin päätös. 16.00 Kurssin tavoite Antaa perustiedot Unitronics miniPLC+display logiikoista: logiikka- ja näyttöohjelmointi sekä tietoliikenneyhteydet. Paikka Klinkmann toimitalo (Eniro 2010: karttasivu 51/80-DE Fonseenintie 3, 00370 Helsinki koulutustila 2.krs). Hinta € 300,- (alv 0%) sisältäen kurssin ja materiaalin sekä lounaan. € 450,- (alv 0%) sisältäen kurssin, materiaalin ja lounaan sekä Unitronics V130 (tuote n:o V13033R2) logiikan graafisella näytöllä ja Unitronics PC-ohjelmistot PLC/display konfigurointiin ja PC-yhteyksiin. Asiakaskohtainen koulutus erikseen sovittuina päivinä € 1000/pvä. TARJOUS (1 kpl/asiakas)! € 399,- (alv0%) sisältäen kurssin, materiaalin, lounaan sekä Unitronics V570 logiikan ja SNAP-in I/O (tuote n:o V570-57-T20B + V200-18-E2B) ja Unitronics PC-ohjelmistot PLC/display konfigurointiin ja PC-yhteyksiin Lisätiedot ja ilmoittautuminen E-mail: [email protected] puh. 09-540 4940 2009 kevät Jazz™ miniPLC + display with SMS-operations HMI PLC Up to 60 user-designed screens Multilingual: supports over 15 languages and 20 graphic symbols Scroll between pre-programmed recipes/menus Ladder Logic programming ensures functional flexibility Functions include: interrupt, loops, math, store & compare functions Time-based control in 3 clicks High-speed counters Print utilities Full source upload Communication SMS messaging via GSM (send, receive) Remote Access utilities PC access via MODBUS or OPC server MODBUS networking www.klinkmann.com Jazz™ Micro-OPLC™ Much more than a “smart relay”. Full function PLC & HMI, with up to 40 onboard I/Os, all in one device JZ10-11-R10 JZ10-11-T10 Article Number JZ10-11-R16 JZ10-11-T17 JZ10-11-R31 JAZZ special offer 59€ package includes: - JZ10-11-R16 PLC+display - JZPRG PC programming software+cable JZ10-11-T40 JZ10-11-PT15 I/O Inputs 6 Digital 6 Digital 6 Digital 2 Digital/Analog 2 Analog 6 Digital 2 Digital/Analog 2 Analog 16 Digital 2 Digital/Analog 2 Analog 16 Digital 2 Digital/Analog 2 Analog 3 Digital 3 Digital/Analog 3 PT1000/NI1000 Outputs 4 Relay 4 Transistor 6 Relay 7 Transistor 11 Relay 20 Transistor 5 Relay 1 Transistor 2 HSI 2 HSI 2 HSI 2 HSI 2 HSI 1 HSI & 1 HSO Including High-speed I/Os 2 HSI Program Jazz™ Micro-OPLC™ Ladder Code Memory 24К (virtual) Operand Capacity 256 coils, 256 registers, 64 timers Operator Panel Type STN LCD Display Size 2 lines x 16 characters Keypad Number of keys 16 keys, 10 of which are user-labeled General Power Supply 24 VDC Battery Back-up 10 years typical at 25°C, battery back-up for all memory sections and real-time clock (RTC) Environment IP65/NEMA4X (from panel, when mounted) Clock (RTC) Real-time clock functions (date and time) Add-on modules1 & accessories Programming Kit СОМ port kit2 Program Cloner module Keypad slide kit Programming Add-on port (isolated) + software CD Article No.: JZPRG RS232/RS485 Add-on port (isolated) Article No.: JZ-RS4 Copy applications from PLC to PLC Article No.: MJ20-MEM1 Customize the Jazz keypad to your application Article No.: MJ20-JZ-SL1 1 CE/UL 2 In order to download applications and enable communications, install Jazz™ with an add-on module containing a COM port The RS232/RS485 add-on port is not yet UL certified … Replace that “smart-relay” with a real PLC/HMI... www.klinkmann.com Helsinki tel. +358 9 540 4940 [email protected] Yekaterinburg tel. +7 343 376 5393 [email protected] Mineralnye Vody Санкт-Петербург tel. +7 87922 6 193752 34 тел. +7 812 327 [email protected] [email protected] Samara Самaра tel.+7 +7846 846993 3424933 6655 тел. [email protected] [email protected] Кiev Rīga tel. +38 044 495 3340 [email protected] [email protected] Riga tel. +371 6738 1617 [email protected] Москва Vilnius тел. +7 495 641 1616 tel. +370 5 215 1646 [email protected] [email protected] Київ Tallinn тел. +380 444 953 340 tel. +372 668 4500 [email protected] [email protected] Vilnius Мinsk tel. +370 5 215 1646 tel. +375 17 200 0876 [email protected] [email protected] St. Petersburg tel. +7 812 327 3752 [email protected] Moscow tel. +7 495 641 1616 [email protected]