Transcript
CONTOUR 12V
Features & Benefits • Low profile dot-free illumination • Up to 80% more energy efficient than traditional neon • Flexible PCB with SMD LED technology • Custom made lengths • Durable and impact resistant • Contains no lead, mercury or glass • Three year manufacture warranty
Vivid Contour goes above and beyond! There is almost no bend radius from left to right, allowing you to bend it as tight as you like. Vivid Contour delivers all the features and benefits of LED Neon Flex Vivid in a smaller package to facilitate additional applications. Vivid Contour’s technological core is a versatile PCB with the latest in SMD LED technology.
For more information please contact toll free: 1.888.580.NEON (6366) email:
[email protected]
www.ledneonflex.com E347880
CONTOUR 12V
Dimensions
9 x 18mm / .35 x .71in
Output LED Light
Epistar SMD LED Chip
Running Length
Single feed: 10 meters / 32.8 feet Double feed: 20 meters / 65.6 feet
Light Surface
Square profile 160°
Lumen Maintenance
50,000 Hours / 5 years
Electrical Input Voltage
12V DC Constant Voltage
Power Consumption
4.5 watts per meter / 1.37 watts per foot
LED Count
72 per meter / 22 per foot
Physical Materials
Polyvinyl Chloride (PVC)
LED Spacing
13.9 millimeter / .55 inch
Cutting Length
41.65 millimeters / 1.64 inches - 3 LEDs
Package Size:
340 × 340 × 120 millimeters / 13.4 × 13.4 × 4.7 inches
Package Weight:
5.7 kilograms / 12.5 pounds
Thermal Management
Cool to the Touch, Free Air Convection
Fixture Connections
Front & End Leader Cables
Bend Tolerances Maximum Diameter (lateral bending only)
38 millimeters / 1.5 inches
Temperature Ranges Ambient
-30° to 45° Celsius / -22° to 113° Fahrenheit
Operating
-25° to 45° Celsius / -13° to 113° Fahrenheit
Dependability Warranty
3 years
Colors Available Color
CCT Wave Length
Red Green Blue Amber Warm White White Cool White Daylight White
620 - 630 Nanometer 520 - 530 Nanometer 465 - 475 Nanometer 590 - 595 Nanometer 2700K 3500K 4500K 5700K
Lumen Count Color
Per Meter
Per Foot
Red Green Blue Amber Warm White White Cool White Daylight White
12 lm/m. 50 lm/m. 10 lm/m. 12 lm/m. 120 lm/m. 120 lm/m. 120 lm/m. 120 lm/m.
3.7 lm/ft. 15.2 lm/ft. 3.1 lm/ft. 3.7 lm/ft. 36.6 lm/ft. 36.6 lm/ft. 36.6 lm/ft. 36.6 lm/ft.
Profile
18 mm .70 inch
Technical Specifications
Safety Certification
Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant.
IP Rated
IP68 with Accessories
*Photometric Data available on the next page.
www.ledneonflex.com
9 mm .35 inch
Mounting
Tolerance of the light is ±0.2mm.
CONTOUR 12V 3
Year
160°
D:9cm 3 Year
Minimum Bend Diameter
m 8m nch i 1.5
Φ3
Photometric Data LED Type
SMD
Beam angle
160°
Color
Wavelength
Lumen/m
Power/m
Color
CCT
Lumen/m
Power/m
Red
620-630nm
>45lm
3.5W
2700K
2725±145K
>110lm
5W
Green
520-530nm
>80lm
5W
3000K
3045±175K
>120lm
5W
Blue
465-475nm
>15lm
5W
3500K
3465±245K
>120lm
5W
Amber
585-595nm
>50lm
3.5W
4000K
3985±275K
>120lm
5W
4500K
4503±243K
>120lm
5W
5000K
5028±283K
>120lm
5W
5700K
5660±355K
>110lm
5W
Candle Power Distribution
Illuminance Characteristics
3.281ft 1m
www.ledneonflex.com
CONTOUR 12V Ideal for a seamless look on long runs. Please Note: Three week lead time plus shipping. Bottom Exit Cable Connects light to power supply with pre-installed bottom cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length
Part Number
0.3m / 0.98’ 1m / 3.2’ 3m / 9.8’
LN-9X18-FA-PFB-30cm LN-9X18-FA-PFB-1m LN-9X18-FA-PFB-3m
Side Exit Cable Connects light to power supply with pre-installed side cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length
Part Number
0.3m / 0.98’ 1m / 3.2’ 3m / 9.8’
LN-9X18-FA-PFS-30cm LN-9X18-FA-PFS-1m LN-9X18-FA-PFS-3m
End Exit Cable Connects light to power supply with pre-installed end cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length
Part Number
0.3m / 0.98’ 1m / 3.2’ 3m / 9.8’
LN-9X18-FA-PFE-30cm LN-9X18-FA-PFE-1m LN-9X18-FA-PFE-3m
End Cap Pre-installed termination protection of the light, IP68. Part Number LN-9X18-FA-EC
Variance of the injection moulded ends is +/-0.3mm.
Optional Accessories Male and Female Connectors
Cutter
Please Note: Factory order only.
*Installation guide available upon request or at www.ledneonflex.com
www.ledneonflex.com
CONTOUR 12V
End Fittings Stocked accessories. Standard on non-factory orders. Connector Connects light to power lead, IP68. The following cable lengths are available. (For longer lengths please contact us) Length
Part Number
0.3m / 0.98’ 1m / 3.2’ 3m / 9.8’
LN-9X18-IP68-300-L or R LN-9X18-IP68-1m-L or R LN-9X18-IP68-3m-L or R
Feed connector*1 (Two-pin), Silicone gasket*1, U steel plate*1, Crimp Plate *1
End Cap Termination protection of the light. IP68. Part Number LN-9X18-IP68-END Tail plug*1 Silicone gasket*1 U steel plate*1 Crimp Plate*1
Snap Fittings Stocked accessories. Standard on non-factory orders. Connector Connects light to power lead, IP68. The following cable lengths are available. (For longer lengths please contact us) Length
Part Number
0.3m / 0.98’ 1m / 3.2’ 3m / 9.8’
LN-9X18-IP68-SC-300 LN-9x18-IP68-SC-1M LN-9x18-IP68-SC-3M
Feed connector * 1 (PC Cover), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate*1
End Cap Termination protection of the light. IP68. Part Number LN-9X18-IP68-SC-END Tail plug * 1 Silicone gasket *1 PC Cover * 1 Crimp Plate * 1
Part Number Naming Convention
LN-9X18-12V-XXX XXX - Fixture Color 12V - Voltage 9x18 - Profile Size LN - LED Neon Flex www.ledneonflex.com
Mounting Channel CONTOUR 12V
.86 inch
Punched Aluminum Mounting Channel
.54 inch
/.13 inch
Uses: Ceilings and Vertical Installations
Part Number 30 mm / 1 inch*
LN-9X18-AL2-0.3M
15 mm / .59 inch*
/
Φ 3.5 mm / .13 inch
3
Contour
1000 mm / 39.37 inch
LN-9X18-AL2-1M
100 mm / 3.93 inch
200 mm / 7.87 inch
Φ 3.5 mm / .13 inch
10
Contour
Self-locking Aluminum Mounting Channel
Uses: Ceilings and Vertical Installations
Part Number 50 mm / 1.96 inch 1000 mm / 39.37 inch
LN-9X18-0.3M-SL LN-9X18-1M-SL
www.ledneonflex.com
25 mm / .98 inch
/
25 mm / .98 inch
/
Φ 3.5 mm / .13 inch
100 mm / 3.93 inch
200 mm / 7.87 inch
150 mm / 5.9 inch
350 mm / 13.77 inch
Φ 3.5 mm / .13 inch
Testing Results for LED Neon Flex Performance
Standard/Reference value/Description
Optical Testing Photometric test-integrating sphere system
IES LM 79 (lumen, CCT, CRI, XY, SDCM, wave length)
Photometric test-goniophotometer system
IES LM 79(lumen intensity distribution & Lux diagram)
Illuminance efficiency ratio
Product specification sheet
Uniformity of lighting surface (led neon flex light)
Evaluate indirect glare
RGB color mixture uniformity (led neon flex light)
Evaluate the uniformity of color
Lumen maintenance test
IES LM 80
Color-coordinate shift
ANSI C78.377
Electrical Testing Normal Temperature Test (77°F)
UL1598, IEC60598-1
Normal Temperature Test(104°F)
UL1598, IEC60598-1
Reliability Testing Lifetime test
IS TM 21
Electrical insulation test
UI2388, IEC60598-1, >4M Ω
Dielectric voltage withstand test
UI2388, IEC60598-1, >1.5KV
Waterproof test
IP68/IP67/IP65
Hi-Lo Temperature impact
-68°F – 140°F
Ultraviolet (UV) light exposure
ASTM G 26. Exposure Method 1
Salt spray test
IEC68-2-11
Anti-cracking test (-13°F)
Assess PVC’s anti-cracking property under low temp.
Connector pull test
50N
Mechanics Testing Pull test (Connector, Body)
UI2388
Impact test
IEC 62262, UL2388
Bending fatigue resistance test
UL2388, IEC60598-1
www.ledneonflex.com
CONTOUR 12V
Charts
www.ledneonflex.com
CONTOUR 12V
Charts (X,Y) Chromaticity Diagram
Wavelength of Color Light
www.ledneonflex.com
CONTOUR 12V
CONTOUR 12V Project Details Project Name: Notes:
Warehouse Locations United States
Canada
6230 W. Desert Inn Rd. Las Vegas, NV 89146 T: (702) 749-5316
30 Milner Road Moncton, NB E1E 2R8 T: (702) 749-5319
For more information please contact
toll free: 1.888.580.NEON (6366) email:
[email protected]
www.glls.com
www.ledneonflex.com
