Transcript
Features and Benefits • Seamless Uniform Illumination • High quality SMD, LED Chip & IC Chip (Chasing) • UV & flame resistant construction (PVC) • Domed profile for large viewing angles (270°) • Uniform & even light source with no LED “hot-spots” • High illumination • Flexible with 120mm / 4.72 inch minimum bending diameter • High IP Rating (IP68) • Continuous length up to 20m/65.6ft • Environmental friendly & energy efficient • Three Year Manufacturer’s Warranty Vivid Pixel allows for advanced chasing and programmable scenes. Perfect for creating a stunning visual display. Achieve advanced lighting scenes easily with its built-in IC and control gear. Suitable for architectural, stage, indoor & outdoor applications. For more information please contact toll free: 1.888.580.NEON (6366) email:
[email protected]
www.ledneonflex.com E347880
PIXEL
3
Year
PIXEL
3 Year
Vivid Pixel allows for advanced chasing and programmable scenes. Perfect for creating a stunning visual display. Achieve advanced lighting scenes easily with its built-in IC and control gear. Suitable for architectural, stage, indoor & outdoor applications.
Technical Specifications Dimensions
11.5 x 29mm / .45 x 1.14in
11.5 × 21mm / .45 × .83in
Output LED Light
SMD, RGB Light Chip
Running Length
Single feed: 10 meters / 32.8 feet Double feed: 20 meters / 65.6 feet
IC Type
UCS2903
UCS2903
Light Surface
Rounded profile 270°
Square profile 160°
Lumen Maintenance
70,000 Hours L70 @ 25°C : 90,000 L50 @ 25° 50,000 Hours L70 @ 50° : 70,000 Hours L50 @ 50°C
Chromaticity Ordinates
x: 0.4715 y: 0.4276 u: 0.2624 v: 0.5354
Color Bin Tolerances
+/- 3 %
Efficacy (lm/w)
19.88
CRI 88
Electrical Input Voltage
24V DC Constant Voltage
Power Consumption
12 watts per meter / 3.66 watts per foot
Power Factor
≤1
LED Count
56 LEDs per meter / 17 LEDs per foot
Dimming
110-277v 0- 10v & Magnetic Low Voltage
Physical Materials
Polyvinyl Chloride (PVC)
LED Spacing
1.79 cm / .7 inches
Cutting Length
12.5cm / 4.92 inches - 7 LEDs
Package Size:
340 × 340 ×240 millimeters / 13.4 × 13.4 × 9.4 inches
340 × 340 × 120 millimeters / 13.4 × 13.4 × 4.7 inches
Package Weight:
10.5 kilograms / 23.1 pounds
8 kilograms / 17.6 pounds
Thermal Management
Cool to the Touch, Free Air Convection
Fixture Connections
Front & End Leader Cables
Bend Tolerances Maximum Diameter (lateral bending only)
120 millimeters / 4.7 inches
Temperature Ranges Ambient
-30° to 45° Celsius / -22° to 113° Fahrenheit
Operating
-25° to 45° Celsius / -13° to 113° Fahrenheit
Humidity
0- 95% Non Condensing
Dependability Warranty
3 years
Safety Certification
Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant.
IP Rated
IP68 Factory Order/ IP68 with Accessories
*For DMX controller inquiries please check our website or call for customer service. **Photometric Data available upon request or at www.ledneonflex.com
Colors Available Color
CCT Wave Length
Red Green Blue
620 - 630 Nanometer 520 - 530 Nanometer 465 - 470 Nanometer
Lumen Count Color
Lumen/m
Red Green Blue R+G+B(white)
>201lm >751lm >151m >110lm
Power/m 3W 4.5 W 4.5 W 12 W
Programming Options • Chase
• Skip
• Flow
• Flash
• Wave
• Gradual Change
• Skip
• Fade-in & Fade-out
PIXEL 3
Year
270°
3 Year
Minimum Bend Diameter
12
0m
m
nch
01
i 4.7
01 |0
01
|0
|0
2
2
2
2
0 1 |0
Candle Power Distribution
Photometric Data 270°
Color
Wavelength
Color
CCT
Red
620-630nm
2100K
2100±125K
Green
520-530nm
2400K
2400±125K
Blue
465-475nm
2700K
2725±145K
Amber
585-595nm
3000K
3045±175K
3500K
3465±245K
4000K
3985±275K
4500K
4503±243K
5000K
5028±283K
5700K
5660±355K
6500K
6530±510K
Illuminance Characteristics
www.ledneonflex.com
PIXEL Injection-moulded End Fittings Ideal for a seamless look on long runs. Please Note: Three week lead time plus shipping. Factory orders only. Bottom Exit Cable
LN-11X29-RGB-FA-PFB LN-11X29-RGB-FA-PFB-1m LN-11X29-RGB-FA-PFB-3m
18mm 11.5mm
Side Exit Cable
16.5mm
Part Number
0.3m / 0.98’ 1m / 3.2’ 3m / 9.8’
LN-11X29-RGB-FA-PFS LN-11X29-RGB-FA-PFS-1m LN-11X29-RGB-FA-PFS-3m
1.8mm
29mm
Connects light to power supply with pre-installed side cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length
41.8mm
Part Number
0.3m / 0.98’ 1m / 3.2’ 3m / 9.8’
30.8mm
Connects light to power supply with pre-installed bottom cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length
1.8mm
16.5mm
Φ12mm 11.5mm
18mm
22.5mm
Part Number
0.3m / 0.98’
LN-11X29-RGB-FA-PFE LN-11X29-RGB-FA-PFE-1m LN-11X29-RGB-FA-PFE-3m
1m / 3.2’ 3m / 9.8’
Φ12mm Φ
29mm
End Cap
Part Number
1.8mm
16.5m m
30.8mm
Pre-installed termination protection of the light, IP68.
18mm
11.5mm
30.8mm
Length
30.8mm
Connects light to power supply with pre-installed end cable, IP68. The following cable lengths are available. (For longer lengths please contact us)
Φ12mm
End Exit Cable
LN-11X29-FA-EC 11.5m m
www.ledneonflex.com
15mm
PIXEL End Fittings Stocked accessories. Standard on non-factory orders. Power Connector
21m m
Connects light to power lead, IP68. The following cable lengths are available. (For longer lengths please contact us) Length
Part Number
0.3m / 0.98’ 1m / 3.2’ 3m / 9.8’
LN-11X29-IP68-RGB-300-L / LN-11X29-IP68-RGB-300-R LN-11X29-IP68-RGB-1M-L / LN-11X29-IP68-RGB-1M-R LN-11X29-IP68-RGB-3M-L / LN-11X29-IP68-RGB-3M-R
57mm
Feed connector * 1 (Four-pin), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate *1
Connects light to power lead, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2’ 3m / 9.8’
Part Number LN-11X29-IP68-1M-RB LN-11X29-IP68-3M-RB
33mm
Bottom Power Connector
20.5mm
Feed connector * 1 (Four-pin), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate *1
End Cap
43mm
21mm
Termination protection of the light. IP68. Part Number LN-11X29-IP68-END Tail plug * 1 Silicone gasket *1 Aluminum Billet * 1 Crimp Plate * 1
33mm 37mm
Jumper Connects two pieces of light together with a flexible cable. IP68 connector. Lengths Available
Part Number
0.3m / 0.98’ 1m / 3.2’ 3m / 9.84’
LN-11X29-RGBS/TW-300mm-J
L
LN-11X29-RGBS/TW-1m-J LN-11X29-RGBS/TW-3m-J
Double-end connector *1(Four-pin), Silicone gasket * 2, Aluminum Billet* 2, Crimp Plate * 2
Power T-Feed
50mm
Connects two pieces of light together with a T joint, powered from the middle. IP68 connector. Lengths Available (L1 & L2)
Part Number
0.3m / 0.98’
LN-11X29-IP68-RGB-T
T joint * 1 (Four-pin), Silicone gasket * 2, Aluminum Billet * 2, Crimp Plate * 2
L2
L1
Seamless Splice Connects two pieces of light together seamlessly. Part Number 32m m
LN-11-IP40-RGB-SPL Silicone gasket * 1 Joint PCB * 1 U steel plate * 2 Crimp Plate * 2 Please Note: Indoor only.
www.ledneonflex.com
m
63m
17 .5m m
33mm
PIXEL Snap Fittings Stocked accessories. Standard on non-factory orders. Connector Connects light to power lead, IP68. The following cable lengths are available. (For longer lengths please contact us) Length
Part Number
0.3m / 0.98’ 1m / 3.2’ 3m / 9.8’
LN-11X29-IP68-SC-300 LN-11X29-IP68-SC-1M LN-11X29-IP68-SC-3M
Feed connector * 1 (PC Cover), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate*1
End Cap Termination protection of the light. IP68. Part Number LN-11X29-IP68-SC-END Tail plug * 1 Silicone gasket *1 PC Cover * 1 Crimp Plate * 1
www.ledneonflex.com
Mounting Channel
PIXEL
.86 inch
Aluminum Mounting Channel
.54 inch
/.13 inch
Part Number 50 mm / 2 inch
LN-11-AL-CLIP
25 mm / .98 inch
/
Φ 3.5 mm / .13 inch
Basic, 160 & 270 Models
1000 mm / 39.37 inch
LN-11-AL-1M-CHAN
100 mm / 3.93 inch
200 mm / 7.87 inch
Φ 3.5 mm / .13 inch
Basic, 160 & 270 Models
.94 inch
Plastic Mounting Channel
.55 inch Please Note: Production Order Only. 21 Day Lead Time.
/.13 inch Part Number 300 mm / 11.81 inch
LN-11-PL-CLIP
50 mm / 1.96 inch
200 mm / 7.87 inch
Φ 3.5 mm / .13 inch
Basic, 160 & 270 Models
1000 mm / 39.37 inch
LN-11-PL-1M-CHAN
100 mm / 3.93 inch
200 mm / 7.87 inch
Φ 3.5 mm / .13 inch
Basic, 160 & 270 Model
www.ledneonflex.com
Self-locking Aluminum Mounting Channel
PIXEL
Uses: Ceilings and Vertical Installations
Part Number 50 mm / 1.96 inch
LN-11-CLIP-SL
25 mm / .98 inch
/
25 mm / .98 inch
/
Φ 3.5 mm / .13 inch
1000 mm / 39.37 inch
LN-11-AL-1M-CHAN-SL
100 mm / 3.93 inch
200 mm / 7.87 inch
150 mm / 5.9 inch
350 mm / 13.77 inch
Φ 3.5 mm / .13 inch
Optional Accessories Male and Female Connectors
Cutter
Please Note: Factory order only.
*Installation guide available upon request or at www.ledneonflex.com
Part Number Naming Convention
LN-11X29-24-RGBS RGB - Fixture Color 24V - Voltage 11X29 - Profile Size LN - LED Neon Flex www.ledneonflex.com
Testing Results for LED Neon Flex Performance
Standard/Reference value/Description
Optical Testing Photometric test-integrating sphere system
IES LM 79 (lumen, CCT, CRI, XY, SDCM, wave length)
Photometric test-goniophotometer system
IES LM 79(lumen intensity distribution & Lux diagram)
Illuminance efficiency ratio
Product specification sheet
Uniformity of lighting surface (led neon flex light)
Evaluate indirect glare
RGB color mixture uniformity (led neon flex light)
Evaluate the uniformity of color
Lumen maintenance test
IES LM 80
Color-coordinate shift
ANSI C78.377
Electrical Testing Normal Temperature Test (77°F)
UL1598, IEC60598-1
Normal Temperature Test(104°F)
UL1598, IEC60598-1
Reliability Testing Lifetime test
IS TM 21
Electrical insulation test
UI2388, IEC60598-1, >4M Ω
Dielectric voltage withstand test
UI2388, IEC60598-1, >1.5KV
Waterproof test
IP68/IP67/IP65
Hi-Lo Temperature impact
-68°F – 140°F
Ultraviolet (UV) light exposure
ASTM G 26. Exposure Method 1
Salt spray test
IEC68-2-11
Anti-cracking test (-13°F)
Assess PVC’s anti-cracking property under low temp.
Connector pull test
50N
Mechanics Testing Pull test (Connector, Body)
UI2388
Impact test
IEC 62262, UL2388
Bending fatigue resistance test
UL2388, IEC60598-1
www.ledneonflex.com
PIXEL
Charts
PIXEL
Power(w) 12 11 10 9 8 7 0
-25
-20
-15
-10
-5
0
10
15
20
25
30
35
40
45
50
55
60 Tc(℃)
Working Temperature vs. Power Lumen(lm) 160 14 0 120 100 80 60 40 20
03
1
2
47
5
69
8
10 Length(m)
47
5
69
8
10 Length(m )
Lumen Output vs. Length of Light V(v) 24 .0 22 .0 20 .0 18 .0 16 .0 14 .0 12 .0 10 .0 03
1
2
Working voltage vs. Length of Light
www.ledneonflex.com
PIXEL Power Supply Configuration Table The maximum length of light for different power supply ratings. Power Supply Rated Power /mtr 35w 60w 75w 80w 100w 120w 150w
185w
240w
320w
6.5w / 7.2w / 8w
3m
6m
7.5m
8m
10m
12m
15m
18m
24m
30m
10.6w / 11w / 12w
2m
3.5m
4.5m
5m
6m
7m
10m
12m
14m
20m
Feed Setup Single Feed Example:
Double Feed
It is recommended to use one 80W power supply when loading maximum 8m light (7.2w/m) or maximum 5m light (12w/m) when powering the light at one end.
(X,Y) Chromaticity Diagram
y 0.46
2700 K 3000K
0.44
3500K
0.42
4000K 4500 K
0.40 0.38 0.36
5000K 5700K 6500K
0.34 0.32 0.30 0.28 0.26 0.28 0.30 0.32 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 0.54
x
www.ledneonflex.com
PIXEL Project Details Project Name: Notes:
Warehouse Locations United States
Canada
6230 W. Desert Inn Rd. Las Vegas, NV 89146 T: (702) 749-5316
30 Milner Road Moncton, NB E1E 2R8 T: (702) 749-5319
For more information please contact
toll free: 1.888.580.NEON (6366) email:
[email protected]
www.glls.com
www.ledneonflex.com
