Preview only show first 10 pages with watermark. For full document please download

Vl-sv71 Vl-sv72

   EMBED


Share

Transcript

Video Intercom System VL-SV71 VL-SV72 Key Features • Highly Expandable: Up to 3 7-inch wide monitors can be connected to the main monitor. In addition, PBX connectivity is also supported. • 7-inch Screen: The main monitor and extension monitor have a 7-inch wide screen that offers easy viewing of wide vertical and horizontal views. • Voice Change Function: This function makes woman’s voice (higher keys) sounds like a man’s (lower keys). • Electric Lock Release Support for Gate: The gate or door lock can be easily and quickly released using monitors. • Picture Recording Function: The main monitor and extension monitor can record doorphone images from up to 50 doorphone calls or monitoring sessions. (up to 8 still images per visitor/ session) • Night Vision with LED lights (illumination lamp): Door station is equipped with LED lights (illumination lamp). It enables the colour display of visitors at a distance of about 50 cm at night. Wiring Schematic Diagram DOORPHONE 1 NP D1 D2 D3 D4 Ml-1 Ml-2 MO-1 MO-2 MO-3 MO-4 MO-5 MO-6 IN1 IN2 IN3 IN4 P1 P2 DOORPHONE 2 *1 (Optional lobby station or Video Intercom System for Apartment Complexes can be connected.) MAIN MONITOR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 *1 NP NP 19 20 21 22 Doorphone – Main monitor – Extension monitor*6 5 Ml-1 6 Ml-2 EXTENSION MONITOR 1 5 Ml-1 6 Ml-2 EXTENSION MONITOR 2 5 Ml-1 6 Ml-2 NP S1 S2 S3 S4 EXTENSION MONITOR 3 Connection device for option input (A contact)*2 NP NP Terminal box (4-conductor wiring) 24 V DC POWER SUPPLY UNIT *4 Power supply Electric lock Power supply Electric lock Wire type*5 Wiring run NP NP NP NP NP Wire type and length PBX*3 NP: Non-polarised *1 When you use an additional doorphone, the maximum number of the electric locks that can be connected to the doorphone depends on the type of doorphone. Consult your dealer for further information. For VL-V554 users: - Make sure to only connect electric door locks to the S1/S2 terminals of the doorphones. *2 Connection devices for option input (A contact) can be used when a VL-V900 and VL-V700 series Video Intercom System for Apartment Complexes is used. - Make sure to connect emergency terminals to the IN1/IN2 terminals. - Make sure to connect doorbells to the IN3/IN4 terminals. A doorbell and doorphone 2 cannot be used together. *3 Connectable PBX Model Numbers: KX-TDA30/100/100D/200/600 series, KX-TDE100/200/600 series, KXNS300/500/700/1000 series Please consult your dealer when connecting with a PBX. *4 VL-SV72/VL-MV72 only Main monitor – Power supply unit Diameter φ 0.65 mm φ 1.0 mm φ 0.5 mm φ 0.65 mm φ 1.0 mm Length (Max.) 100 m 130 m 50 m 10 m 20 m 22 AWG 18 AWG CAT 5 22 AWG 18 AWG Main monitor – Electric lock*7 φ 0.5 mm - φ 1.2 mm (24 AWG - 17 AWG) According to the specification of connected device. Main monitor – Connection device for option input (A contact)*7 φ 0.5 mm - φ 1.2 mm (24 AWG - 17 AWG) According to the specification of connected device. Main monitor – PBX φ 0.65 mm CAT 3 or 22 AWG 100 m *5 Type: Single-pair cable with outer sheath (jacket) Conductor: Copper solid • A certified power supply wiring has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply wiring not lighter than ordinary polyvinyl chloride flexible wiring according to IEC 60227 shall be used. *6 When an extension monitor is used, make sure that the total wiring length from the doorphone to the main monitor and then to the extension monitor, is within about 100 m. *7 When using an electric lock or a connection device for option input (A contact), select a device that meets the following guidelines: • Electric lock connection terminal (S1/S2, S3/S4): - N/O dry closure contact - 30 V AC (1 A)/24 V DC (1 A) or lower • Connection device for option input (A contact) terminal (IN1/IN2/IN3/IN4): - Input method: No-voltage contact - Open-circuit voltage between terminals: DC 7 V or less - Detection definite time: 0.1 seconds or more - Short-circuit between terminals: 5 mA or less - Resistance value: make: 500 Ω or less, break: 15 KΩ or more Optional Accessories Door Station (Doorphone) Door Station (Doorphone) Extension Monitor Lobby Station VL-V522L CMOS 1.0 M pixels VL-V554 (Surface mount) VL-V554U (Flash mount) VL-MV71 VL-MV72 Up to 20 main monitors can be connected. (Surface mount) CMOS 0.3 M pixels VL-V555 (Surface mount) (Power source) VL-MV71: 220-240 V AC, 50/60 Hz VL-MV72: 24 V DC Power supply unit (supplied) Model Composition VL-SV71 VL-MV71 x 1, VL-V522L x 1 VL-SV72 VL-MV72 x 1, VL-V522L x 1, VL-PS241 x 1 Specifications Model number and name VL-MV71 VL-MV72 VL-PS241 (VL-MV72 only) VL-V522L Main Monitor Station (Main monitor) Extension Monitor Power supply unit Door Station (Doorphone) Up to 3 Up to 2 (not including the main monitor) 243 Dimensions (mm) 99 100 29.5 Power consumption VL-MV71: 220-240 V AC, 50/60 Hz VL-MV72: Power supply unit (VL-PS241) 24 V DC, 0.4 A Input: 220-240 V AC, 0.2 A, 50/60 Hz Output: 24 V DC, 0.6 A Power supplied by the main monitor VL-MV71: Standby: Approx. 2.0 W During operation: Approx. 10.5 W VL-MV72: Standby: Approx. 1.6 W During operation: Approx. 9.8 W - - 158 x 243 x 29.5 mm 104 x 100 x 54 mm 131 x 99 x 36.5 mm VL-MV71: 835g VL-MV72: 710g 215 g 200 g Ambient temperature: Approx. 0 °C to +40 °C Relative humidity (non-condensing): up to 90 % Ambient temperature: Approx. 0 °C to +50 °C Relative humidity (non-condensing): up to 90 % Ambient temperature: Approx. -15 °C to +55 °C Relative humidity (non-condensing): up to 90 % (tested up to -20 °C) 7-inch wide colour / WVGA (800 x 480 pixels) - - English, Arabic - - Hands-free - - Dimensions (H x W x D) (Excluding protruding sections) Weight Operating environment Display 131 104 158 Power source 36.5 54 Display language Talking method - - Horizontally: Approx. 87˚ Vertically: Approx. 66˚ Wall mount (mounting bracket supplied) Wall mount or attach to DIN rail Surface mount (mounting base supplied) Minimum illuminance required - - 1 lx (within approx. 50 cm from the camera lens) Lighting method - - Warm white coloured LED lights, Infrared LEDs IP rating / IK rating - - IPX3* Flame retardant ABS resin Flame retardant PC+ABS resin Flame retardant ABS resin Viewing angle Installation method External material * Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken. Installing the Doorphone • Installation Position Mounting base Wood screws 99 mm 83.5 mm Side View 83.5 mm 131 mm Wall Wire (User supplied) Image range 650 mm 500 mm Installing the Main Monitor/Extension Monitor 500 mm 1160 mm Mounting base Hole in wall Installing the Power Supply Unit Mounting bracket Main Monitor 50 mm 7 mm Front View AC cable Top View 58 mm 60 mm Screws 87° 1810 mm 243 mm Vertical, flat wall Top View 960 mm Centre of doorphone 1450 mm Screwdriver Mounting bracket 66° 24 mm AC IN connector 158 mm Bottom View 83.5 mm 83.5 mm Important – Safety Precaution: carefully read the operating instructions and installation manual before using this product. Remove the screw on the cable cover. DC cable DC cable binder hole DC Cable 25 mm DC OUT terminal 7 mm • The actual product may vary slightly from photograph. • Weights and dimensions are approximate. • Design and Specifications are subject to change without notice. • These products may be subject to export control regulations. DISTRIBUTED BY : MG-DHPL021EN 1707TD/ZZZ-AU2