Transcript
深圳市跃科达科技有限公司 Shenzhen SUNSKY Technology Limited
VM106 Operation manual Function： 1、folder support music playback MP3, WMA music format. 2、A recording quality, WAV format: 64KBPS： 3、LINE IN interface circuit input; can call recording; 4、VOX function, according to the size of the sound signal be recorded automatically。 5、play in fast forward, fast reverse playback. To set the repeat mode。 6 、 Automatic shutdown: This machine is in standby mode, no operation Auto power off after 2 minutes。 7、multi-level digital volume display control system。 8、precision power monitoring, low voltage suggest that low recording function automatically when saved。 9 、 built-in mono microphone and support for an external microphone recording, high-fidelity speaker output。 10.built-in rechargeable lithium battery。 11.Support Window98/ME/2000/XP, and Mac OS 10.X and Linux Kemel2.4.2 more
一、Use Notice:
In order to maintain good performance, to avoid placing or use the machine in the following places。 1. Bathrooms or other areas exposed to moisture。 2. Sun exposure or near heating equipment, and other high-temperature environment. 3. lower temperature places。 4. Dusty places。 Do not repair or change the machine by self, if the product in question please contact with the appointed service center. Please remove the batteries from the machine, if long-term nonuse. Please avoid dropping and violent collision, and do not press LCD screen forcibly; otherwise it may result in damage or LCD display abnormal。 Please adjust to a suitable volume when use the earphone for playing, the volume should not be too large if feel tinnitus, change to small-volume or stop using. Please read the menu carefully before operation, we are not responsible for the losses of recording information caused by maintenance or function problem. Do not use liquid or a wet cloth containing strong detergent to clean the machine。 To avoid degaussing, please keep the machine away from the magnetic material, such as floppy
深圳市跃科达科技有限公司 Shenzhen SUNSKY Technology Limited
disk & credit card。 Special Statement ： Please read the operation manual carefully before using ,The company will not be responsible for data loss as a result of misoperation or other non-anti-factors. Particularly remind the user careful operation, and make another data to copy!! MICRO SD capacity is greater and then the longer the boot time The more recording files, recording the longer startup time ★★★Special Note: 1、Use the new MICRO SD card, format the new card after first use. 2. Use (old card) or non-use of the machine MICRO SD card, back up the data card
二、
Appearance and the part of the name
1 2
【 】 【MODE】
USB Mode key / Repeat Select / Folder options / VOX on and off
3 4
【 【
】 】：
Volume increase Previous/Rewind
5 6
【 【
】 】
Volume decrease Next/fast forward
7 8 9
【 】: 【 】： 【 】
10 【
】
11 【 】 12 【REC】 13 【ON/OFF】
Play button / pause / stop button / switch key External input / external MIC input jack Lanyard Department Built in Microphone Stereo earphone plug Recording Power switch
深圳市跃科达科技有限公司 Shenzhen SUNSKY Technology Limited
14 15 16 17 ■
【 【 【 【
MIRCO SD Recording indicator LCD display area High-fidelity speakers
】 】 】 】
LCD Display
1）
：VOL/ 22。Volume display and catalog number display.
2） VOX : Light shows "VOX" Voice open. No Sound Off. 3） 4）
■
：Normal sequence. ：playing.
：Repeat One.
：Pause playback.
repeat all songs.
：Record mark
5）
：Recording and playback time display: hour / minute / second
6）
：Representative music folder and enter the music player interface
7）
：Representative music folder and enter the music player interface
8）
： Battery power display
Preparing for use:
Inserted the MICRO SD card, the machine uses MICRO SD card as storage media. If no MICRO SD card is not properly to use ***: Note: 1, using the product before you buy regular brand MICRO SD 2. insert the correct way as shown MICRO SD Card
■
Power on/off 1.Power on：Power switch to "ON" state can boot, the power switch to "ON" If not on, short press
【
】key to boot. Power LCD screen displays "OPEN" 2.Power off ： Under the stop press 【
】 button to shutdown, then shut down LCD screen
displays "OFF". Push down the power switch to stop the "OFF" to shut down
深圳市跃科达科技有限公司 Shenzhen SUNSKY Technology Limited
***After booting the default folder for the recording to be Play interface***
■
Recording 1. Recording: In the standby and any operating state, the recording direction of the arrow keys to drive into the recording. Long recording indicator light LCD screen bright 【
】and【
】
the last two digits in the change (seconds).
1、 Pause recording: In the recording, short press 【 recording indicator light flashes【
】button to pause recording, pause 】figures show no change.
】flashes【
2、 Save Record: In the recording, the recording drive in the opposite direction of the arrow keys to save the recording. During the save process LCD screen display "SAVE" the words, save the lights off after the recording. LCD screen【
】not lit. Save the file in the SD on the
"RECORD" folder, the file name: VOICE000.
3、 VOX Recording ： under the boot and the recording stops the standby screen, press 【MODE】key for 2 seconds, LCD screen display "DVR" then enter the recording start VOX words. Have some time to take the second voice recording. voice recording time is not less than the start to go second. In the standby and stop mode, press 【MODE】 key for 2 seconds and then shut VOX. LCD screen no "DVR" word shows.
4、 Play Recording：
a recording file and bright icon to stop recording, press 【
button to play the recording. Play the recording of short press【 press 【
】
】button to pause playback,
】key to stop playback. During playback, press 【MODE】key can be converted to
normal play, single repeat, all repeat.
■
Play Music 1、
The music files to be copied to the SD card, under the boot standby press "MODE" key to
switch to music mode. LCD screen at this time“
2、
Play：LCD screen “
music in the short press 【
”light.
”display the next short press 【
】 button to play music. Play
】button to pause playback, press 【
】key to stop playback.
深圳市跃科达科技有限公司 Shenzhen SUNSKY Technology Limited
During playback, press 【MODE】key can be converted to normal play, single repeat, all repeat.
■
Play Set a)
Selections play：While playing and stop playing, short press
or
key sequence
to select a song played backward or forward. Under the suspension was elected to stop playing the song. b)
c)
Fast forward / rewind：During playback, press or key，when the current song to rewind or fast forward playback, release the button to continue playing in the selected location. Play Set：During playback, press 【MODE】key can be converted to the order of play (
■
press【
)、single repeat (
)、all repeat play(
).
Volume Adjustment Volume Adjustment：During playback, press【 】Progressively increase the volume button, 】Volume progressively decreased. In the process of adjusting the volume on the LCD screen Change the location of statistics.
■
View recording the remaining space:
In the recording interface is stopped, long press【 】key。then【 the remaining time, the median in front of 4 hours, after a median of 2 minutes
■ Displayed on the LCD screen prompts language A） NO SD: no SD card and SD card not recognized B） NO FILE: Select the folder where the file does not support C） FULL：SD card is full can not be said to record and copy files D） USB：that connected to the computer and charger
■
PC Connection
1、
System Requirements IBM-compatible personal computer CPU: Pentium 166 MHz or more operating system：Windows2000、XP USB port 32MB （Windows 2000，XP 64MB or more recommended）
】digital display shows
深圳市跃科达科技有限公司 Shenzhen SUNSKY Technology Limited
Sound card (optional）
2、 Transfer data First need to end large USB cable into your computer USB connection port, the small end into the USB jack of the machine, the machine LCD screen icons display "USB" word, in the "My Computer" add a name " Removable Disk ", said the unit has been connected to the computer, and can up / download audio files / information; users please download the documents and information, do not unplug the USB cable in order to avoid damage to the machine. 3.
Delete files Native files can only be removed on the computer. Open the removable drive, self-built "RECORD" folder is the native recording saved the specified folder. other documents via computer and other equipment to copy data.
*** High-speed USB 2.0 interface, use the appropriate high-speed connection recommended interface; to make use of the communication cable distribution; use a shorter USB cable length***
■
Charging When the battery symbol spaces, the voltage is low, will soon be shut down. Need to charge to
use. Charging with a USB cable with machine connected to the computer, plug the USB cable head voice recorder. then the bulk of the USB port on the computer. charging the battery symbol flashes on the display. full of not blinking. after the show can continue to charge full. Do not use the machine for a long time, save the 4 months after the charge was again saved. Protect the battery.
■
Specifications
Product Specifications Recording Time
1GB
2GB
4GB
About 35H
About 70H
About 140H
Speaker maximum output 200mW（8 ohm） power Recording source
Telephone recording, built-in microphone and external microphone recording, line recording
Recording format
“WAV” format
temperature
0℃-40℃
深圳市跃科达科技有限公司 Shenzhen SUNSKY Technology Limited
Power Supply
Lithium battery
Frequency
500Hz-3500Hz
play music format
MP3(MPEG1/2/2.5 AUDIO LAYER 3)/WMA
Audio distortion
Speaker ＜ 10% （ Maximum volume ） ， earphone ＜ 1 % （Maximum volume）
Rate Music
WMA:32~192Kbps;MP3:8~320KBPS
Battery power
About 9h
USB standards
High-speed 2.0
Main accessories
manual（with warranty card）、earphone、USB、
Body weight
About 32g（with battery）
Volume size
About 89 mm×29 mm×12.5mm
深圳市跃科达科技有限公司 Shenzhen SUNSKY Technology Limited
