Preview only show first 10 pages with watermark. For full document please download

Volkswagen Golf 5: Central Locking System (eng.)

   EMBED


Share

Transcript

Volkswagen Golf V - Central locking system Page 1 / 9 57 - 2 Central locking system Component locations overview of components for central locking system „ „ Coupling station „ Location: A-pillar, right „ To disconnect harness connector, release boots at pillar 57-1, Removing Comfort System Central Control Module -J393„ Location: below passenger side instrument panel, behind glove compartment Central locking system „ Page 2 / 9 Removing Repair Manual, Body Interior, Repair Group 68, Interior equipment; Compartments, covers and trim; Glove compartment, removing and installing „ „ „ „ „ Front Passengers Door Control Module -J387„ Integrated in window regulator motor. „ Removing Removing 64-2, Door lock „ Door lock is secured to inner door part. „ Electrical central locking system is integrated in door lock. „ Removing Removing 57-1, Coupling station „ Location: B-pillar, right. „ To disconnect harness connector, release boots at pillar 58-1, Removing Right Rear Door Control Module -J389„ Integrated in window regulator motor. „ Removing Removing 64-3, Door lock „ Door lock is secured to inner Central locking system Page 3 / 9 door part. „ „ Electrical central locking system is integrated in door lock. „ Removing Removing 58-1, Right rear lid connector station „ Location: behind C-pillar trim. „ Removing and installing Repair Manual, Body Interior, Repair Group 70, Trim/insulation; Pillars and side trim; Upper C-pillar trim, removing and installing „ „ „ „ Fuel Tank Lid Unlock Motor V155„ Location: behind right luggage compartment trim. „ Removing removing 55-3, Actuator, Rear lid lock „ Location: screwed to rear lid. „ Removing Removing 55-2, Unlocking element with button „ Location: screwed into rear lid. „ Removing Removing 55-2, Left rear lid connector station „ Location: behind C-pillar trim. Central locking system „ Page 4 / 9 Removing and installing Repair Manual, Body Interior, Repair Group 70, Trim/insulation; Pillars and side trim; Upper C-pillar trim, removing and installing „ „ „ „ Door lock, LR „ Door lock is secured to inner door part. „ Electrical central locking system is integrated in door lock. „ Removing Removing 58-1, Left Rear Door Control Module J388„ Integrated in window regulator motor. „ Removing Removing 64-3, Coupling station „ Location: Left B-pillar. „ To disconnect harness connector, release boots at pillar 58-1, Removing Door lock, LF „ Door lock is secured to inner door part. „ Electrical central locking system is integrated in door lock. „ Removing Removing 57-1, Central locking system „ Central switch for window regulator „ Location: installed in door trim „ Remove and installing central window regulator switch Repair Manual, Electrical Equipment, Repair Group 96, Electrical Equipment; Lights, Lamps, switches - interior, lights and switches in doors „ „ „ „ Drivers Door Control Module J386„ Integrated in window regulator motor. „ Removing 64-2, Removing and 57-1, Removing Coupling station „ Location: Left A-pillar. „ To disconnect harness connector, release boots at pillar 57-1, Removing Alarm signal horn „ Location: below plenum chamber cover. „ Removing 64-1, Remove plenum chamber cover Front Hood Switch -F266„ Contact switch for anti-theft warning system, cannot be replaced individually. „ Location: On hood lock. Page 5 / 9 Central locking system „ Removing Removing Page 6 / 9 55-1, Adaptation of keys with radio-frequency remote control Adaptation of keys with remote control is performed using Vehicle Diagnostic, Testing and Information System VAS 5051 A . - Select "Guided Fault-Finding" on Vehicle Diagnostic, Testing and Information System VAS 5051 A . - Via the "Go to" button, select "Function-/Component selection" and the following menu points in sequence: „ Body „ Body Repairs „ 01 - On Board Diagnostic (OBD) capable systems „ Comfort system „ Functions - Comfort system „ Adaptation of keys with radio-frequency remote control Radio-frequency remote control key (foldable) battery assembly overview Central locking system Page 7 / 9 „ Key with variable code transponder „ Radio frequency unit - upper part „ LED „ „ This LED must blink when remote control is operated. „ If LED does not blink when remote control is operated, the battery is completely discharged and must be replaced. Battery „ Removing battery Removing 57-2, Central locking system „ „ Installing battery Installing Page 8 / 9 57-2, Radio frequency unit - lower part Battery for key with radio-frequency remote control (foldable), removing and installing Removing - Insert screwdriver in the slot between radio-frequency unit - 1 - and key - 2 - . - Rotate screwdriver in - direction of arrow - and detach radio frequency unit from key. - Press radio frequency unit - 1 - apart with key bit on key - 2- . Central locking system - Use a screwdriver to unclip battery - 1 - out of holders 2 - in - direction of arrow - . Installing Note polarity and installation position of battery when installing. - Place battery - 1 - in radio-frequency unit - 2 - with positive terminal downward (positive terminal is marked in housing). - Press on battery with light pressure to engage it in radiofrequency unit. - Attach the cover and the radio frequency unit together (do not damage seal). - Then lock radio-frequency unit with key. Page 9 / 9