Transcript
VOS-1HD-DET/R HD-SDI Fiber Optic Extender 1-Channel HD-SDI + 1 Duplex Data + IP Ethernet System Design
1 HD-SDI
VOS-1HD-DET/R provides for the digital transmission of 1-Channel uncompressed 1.485 Gbps HD-SDI (SMPTE 292) or 270 Mbps SD-SDI (SMPTE 259M) 1080p HD video over fiber, support 1 duplex RS232/RS485 data, and 1-channel 10M/100M IP Ethernet, also support one loopback output for local display, and dual outputs for two displays in the remote end.
Audio Stand-alone or rack-mount. All HD-SDI video over Fiber of VOS-1HD-DET/R comes in an insert card version. The cards can be inserted into our 16-slot, 19inch 4U rack-mountable (VOS-CH04-HD16).
1 Data
Single-Mode or Multi-Mode,VOS-1HD-DET/R can support FC/PC or ST/PC optical connector, the transmission distance range according to the Optical Budget. Manufacturer's standard is: Single-mode 20km, Multi-mode 300m.
1 Ethernet
Features •Extends uncompressed HD-SDI or SD-SDI video over fiber •Supports SMPTE 292M, SMPTE 259M or DVB-ASI compliant •Supports embedded digital audio stream •Multi-mode Fiber Support for Distances up to 300m •Single-Mode Fiber Support for Distances up to 20 km •Real-Time Video Transmission for Exceptional Quality and Resolution •No EMI or RFI and no ground loops
Typical Configuration HD/SD-SDI Source with PTZ Mount HD/SD-SDI Output
HD/SD-SDI Input
Display 1 x Duplex Data HD/SD-SDI Output 1 Fiber optic Cable
Loop output VOS-1HD-DET Transmitter
VOS-1HD-DER Receiver
Display 1 x Duplex Data
Display IP Ethernet
PTZ Controller IP Ethernet
1
www.voscom.com
HD-SDI Fiber Optic Extenders Ordering Information Model Number Transmitter
Fiber Mode
Wavelengths
Optical Power Budget
Receiver
Maximum Transmission Distance
VOS-1HD-DEMT
VOS-1HD-DEMR
Multi-Mode
1310nm/1550nm
16dB
300m
VOS-1HD-DEST
VOS-1HD-DESR
Single-Mode
1310nm/1550nm
12dB
20km
Note:
• The Optical Power Budget data fit Mulit-mode(62.5/125 • When using 50/125
m),Single-Mode(9/125
m).
m multimode fiber, subtract 3 dB from the optical power budget.
• Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
• Maximum transmission distance is also limited by fiber bandwidth. • Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug.
• Please feel free to consult factory for any special requirement and customization
Specification • Video
• Connectors Number of Channels:
1-Ch HD-SDI or SD-SDI
Data Rate:
1.485 Gbps; 270 Mbps
Standards:
SMPTE 292M, SMPTE 259M or DVB-ASI
Max Resolution: Equalization:
1920 x 1080 @ 60Hz
Video Connector: Data Connector: Optical Connector: Stand-Alone Power: Rack Power:
75 Ohm BNC (Gold Center Pin) Terminal Block FC/PC or ST/PC Optional Screw terminal block AC line cord
Automatic up to 200m at 1.485 Gbps and 350m at 270 Mbps of Belden 1694A
Return Loss:
> 15dB to 1.485Gbps:
• Electrical & Mechanical Input Power Requirements: Power Adapter:
• Data
Power Consumption: Data Formats:
1-Channel Duplex Rs232 & RS485 Data
Data Rate: Bit Error Rate:
DC to 115.2Kbps 10E-9
• Ethernet/IP Ethernet IEEE 802.3
Data Rate:
10/100 Mbps
Connector:
RJ-45, Auto MDI/MDI-X
www.voscom.com
AC 100V~240V < 5W
Stand-Alone Dimensions:
200mm
135mm
38mm
Card for 4U Rack Dimensions:
145mm
170mm
20mm
Shipping Weight:
2.5kg (include TX & RX)
• Environmental Operating Temperature:
Standard:
DC 5V@2A
Storage Temperature: Relative Humidity: MTBF:
-45
C~+75
C
-45
C~+85
C
0%~95% (non-condensing) >100,000 hours
2
