Transcript
Catalog Number Notes
FEATURES & SPECIFICATIONS INTENDED USE — General illumination for rough service (vandal-resistant) applications. Ideal for applications that require maximum light capabilities for safety and security. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.
Type
Rough Service Fixture
CONSTRUCTION — Housing: Constructed from one-piece, die-cast aluminum. Three threaded 1/2" NPS plugs allow conduit entry, or the housing can be mounted over the outlet box.
VR1C
Gasket: One-piece silicone perimeter lens gasket and closed-cell neoprene housing gasket help to seal out moisture and contaminants. Finish: Post-painted after fabrication in dark bronze polyester powder coat. Additional colors available. OPTICS — White opal, UV-stabilized, polycarbonate lens, nominal thickness .125" (1/8"). Smooth exterior for easy cleaning. Lens secured by either stainless steel tamper-resistant Torx® T-20 or standard stainless steel slotted hex-head screws (two of each included). ELECTRICAL — Ballast: Electronic, Class P, high power factor multi-volt, THD <10% with a starting temperature of 0°F. Exceptions are 7TT, 22DTT and 28DTT electromagnetic ballasts, 120V only.
COMPACT FLUORESCENT
Ceiling/Wall-Mounted
Socket: Thermoplastic socket(s). Lamp: 35K lamp(s) included unless specified L/LP. INSTALLATION — Unit may be ceiling- or wall-mounted. For vandal-resistant applications, mount unit to structure through four mounting holes provided. LISTINGS — UL Listed (standard). CSA Certified (see Options). UL Listed for 25°C ambient temperatures and wet locations for wall-mount or in covered-ceiling applications.
8-7/8 (22.5)
WARRANTY — 1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Actual performance may differ as a result of end-user environment and application.
6-1/2 (16.5)
6-1/4 (15.9)
Note: Specifications subject to change without notice.
All dimensions are shown in inches (centimeters) unless otherwise specified.
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: VR1C 26TRT 120 GMF L/LP
VR1C Series
Wattage
VR1C
7TT 2/7TT 13DTT 18DTT 26DTT 26TRT 32TRT 42TRT
Lens type One 7W twin-tube lamp1 Two 7W twin-tube lamps1 One 13W double twintube lamp One 18W double twintube lamp One 26W double twintube lamp One 26W triple-tube lamp One 32W triple-tube lamp One 42W triple-tube lamp
(blank) HBE PBT VBE
White opal Horizontal black eyelid Perimeter black trim Vertical black eyelid
Accessories: Order as separate catalog number. Hex-base driver bit, Torx TX20, for tamper-resistant screws with center reject pin. RK1 T20DRV Torx TX20 screwdriver for use with tamper-resistant screws with center reject pin. FHVC Steel horizontal external visor6 FV2C Steel vertical external visor6 RK1 T20BIT
INDUSTRIAL
Voltage
Options
120 277 347 MVOLT2
EC GLR GMF IHR IR NL PE CSA
Lamp5 Emergency circuit (incandescent - 25W max - DC bayonet base)3 Internal fast-blow fusing4 Internal slow-blow fusing4 Internal horizontal reflector Internal reflector Night-light (incandescent - 6W max - 6S6DC base)1,3 Photoelectric cell4 CSA Certified
LPI L/LP
Lamp(s) included (standard) Less lamp(s)
Notes 1 120V only. 2 Multi-volt electronic ballast (for DTT and TRT lamps) capable of operating on any line voltage between 120 and 277 volt. 3 Maximum wattage lamp provided. 4 Must specify voltage. Not available with MVOLT. 5 Lamp(s) included unless specified L/LP. 6 For aluminum visor, add AL (example: FHVC AL).
VR1CF_O
VR1C Rough Service Wall/Ceiling-Mounted Fixture, Compact Fluorescent VR1C 28DTT, 28W, double twin-tube Fluorescent lamp, ceiling mounted, 1600 rated lumens. Test number 1195032101. Distribution Curves
Coefficient of Utilization Initial Footcandles
Distribution Data
0° 91 87 80 76 71 72 77 74 65 58 56
Distance in units of mounting height
0° 5° 15° 25° 35° 45° 55° 65° 75° 85° 90°
45° 91 88 86 89 101 115 127 133 135 129 124
90° 91 90 95 108 129 152 165 154 154 99 89
Distance in units of mounting height
VR1C 28DTT, 28W, double twin-tube Fluorescent lamp, wall mounted, 1600 rated lumens. Test number 1195032001. Coefficient of Utilization Initial Footcandles
Distribution Data
Distance in units of mounting height
0° 5° 15° 25° 35° 45° 55° 65° 75° 85° 90°
0° 53 57 65 73 75 74 69 71 75 79 82
45° 53 58 77 98 114 121 121 127 132 137 138
90° 53 58 76 95 109 112 110 105 93 81 79
Distance in units of mounting height
Mounting Height Correction Factor To obtain the footcandle value for different mounting heights multiply the footcandle value by the above correction factor. Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and are subject to change without notice.
MH 6' 10' 12' 14' 8' 1.78 0.64 0.44 0.33
INDUSTRIAL:
One Lithonia Way Conyers, GA 30012
Phone: 800-315-4963 Fax: 770-981-8191
VR1CF_O
www.lithonia.com
© 1998-2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/05/12
