Transcript
PRINTER’S INSTRUCTIONS: FLYER,GATE,VS-GSLG - LINEAR P/N: 224617 C - INK: 4/4: 4-COLOR PROCESS - PAPER STOCK: 100# STERLING GLOSS TEXT OR EQUIVALENT - SIZE: 8.500” X 11.000” WITH 3-HOLE 5/16" DRILL - SCALE: 1-1 - SIDE 1 OF 2
VARIABLE SPEED SLIDE GATE OPERATORS Model VS-GSLG VS-GSLG VARIABLE SPEED INDUSTRIAL • Integral APeX Controller • Up to 24”/sec. gate speed • Soft start/soft stop • Programmable speed control • Direct C-face drive with brake • #50 roller drive chain • 1/2, 1, or 2 HP motor • All voltages, single or three-phase • Powder coat finish • Post mount standard; pad mount optional
All Models ETL Listed; UL325 Compliant
Supporters and Proud Members of
PRINTER’S INSTRUCTIONS: FLYER,GATE,VS-GSLG - LINEAR P/N: 224617 C - INK: 4/4: 4-COLOR PROCESS - PAPER STOCK: 100# STERLING GLOSS TEXT OR EQUIVALENT - SIZE: 8.500” X 11.000” WITH 3-HOLE 5/16" DRILL - SCALE: 1-1 - SIDE 2 OF 2
VS-GSLG SERIES SLIDE GATE OPERATOR SPECIFICATIONS
ELECTRICAL
HP
Voltage Single-Phase Maximum Maximum (Voltage Three-Phase) Gate Length Gate Weight
1/2
115 / 230 VAC (208 / 230 / 460 VAC)
45'
VSVS-GSLG-1 GSLG
1
115 / 230 VAC (208 / 230 / 460 VAC)
VS-GSLG-7
2
115 / 230 VAC (208 / 230 / 460 VAC)
• Solid state 24V control board UL325/UL991 compliant
Model
• Diagnostic LED display for ease of setup and trouble shooting • Variable speed — soft start/ stop programmable through variable frequency drive
VS-GSLG-2
Gate Speed
Shipping Weight
1100 lbs
up to 24”/sec
365 lbs
78'
2500 lbs
up to 24”/sec
375 lbs
100'+
4000 lbs
up to 24”/sec
400 lbs
• 1/2, 1, & 2 HP industrial, continuous-duty, three‑phase, 56-frame motors • Integral entrapment sensing system with digital set point for accurate adjustment and enhanced safety • Integrated maximum run and auto close timers
➊ APeX Controller
➑ ➊ ➌ ➍➋
➏
• Built-in dual gate capability using 3-wire shielded cable • 24V DC power available for access control accessories
➎ ➐
• Continuous-tone entrapment alarm with reset button • Integrated warning beeper during gate movement • Selectable pre‑start alarm with provision for ADA compliant visual pre-start and run alarm MECHANICAL
➎ Heavy-Duty Components
• Adjustable torque limiter • UL325/UL991 compliant and heavy-duty pillow block 24VDC control module bearings for smooth, reliable, • Full featured for access quiet power transmission control, security, and • All models rated for entrapment protection continuous duty • Integral MegaCode receiver ➏ Manual Disconnect • On-board 3-button station • Secure, easy, manual ➋ Direct C-Face Motor-Brakeoperation during power Gear Box Drive failure or emergency • Designed for smooth • Optional remote cable kit for and dependable power outside-the-gate access transmission ➐ Weather-Resistant Cabinet ➌ Variable Drive Speed • Galvannealed steel cabinet • Programmable variable speed with powder coat finish controller for smooth gate • Lockable, gasketed, hinged, operation and high gate speed and removable front cover ➍ Heavy-Duty Braking ➑ Standard Convenience • Double C-face dual disk Features electromagnetic brake • Exterior stop/reset button • Power on/off button
Dimensions
• Heavy-duty 15:1 right-angle C-face gear reducer
2’-6”
2’-4”
71/2” 1’
• #50 roller chain and sprockets • Heavy-duty steel chassis • Heavy-duty pillow-block bearings
3’
• Adjustable torque limiter
CAUTIONS • Automatic gates are not for pedestrians • Automatic gate operators are designed for vehicular traffic only; operators are powerful and can cause serious injury or death; DIRECT ALL PEDESTRIAN TRAFFIC TO A SEPARATE PEDESTRIAN GATE • UL325 requires use of contact or non‑contact anti-entrapment devices • ASTM F2200 requires that all exposed rollers are covered
(800) 421-1587 • www.linearcorp.com Copyright © 2011 Linear LLC
P/N 224617 C
