Transcript
3 Mega-Pixel Network Camera
SNC-M300
NEW
| Specifications Model Camera
Environment Client S/W Browser Compression Network Hardware Network
| Features
| Dual Encoding / Streaming
• 3 mega pixel network camera • MPEG-4 & motion JPEG dual encoding and streaming simultaneously • 1.3 / 2 / 3 mega pixel resolution (selectable) • Video motion detection • Pre/post alarm image buffering • DDNS support • Power over ethernet (PoE) support • Bi-directional audio support • SD memory card slot for alarm image recording
With dual-encoding capability, SNC-M300 can generate and transfer both MJPEG and MPEG4 images simultaneously. This dual encoding and streaming capability is useful for transferring MPEG4 images over limited network bandwidth, while also storing high resolution MJPEG Images to the Nertwork Recording Software or NVR device.
MJPEG
High Bandwidth Network Recording
SNC-M300 Scanning System Image Device Synchronizing System Resolution Video Output (BNC) Network Board OS Client Viewer OS
Video Resolution
Web Browser Audio & Video Codec Flash Memory SDRAM Ethernet Network Protocol Network Protocol Streaming DDNS NTSC/PAL MJPEG
Frame Rate
NTSC/PAL
MPEG4 MJPEG
MPEG4 Video Quality Motion Detection Sensitivity Audio ADPCM Connection Users Alarm I/O Alarm Event Alarm Input
G.711
Motion Detection MPEG4
| 3 Mega Pixel Resolution
Low Band width Network Web
With mega pixel resolution, SNC-M300 delivers sharp and vivid images for high-end surveillance and security monitoring.
* SNC-M300 supports only VGA(640x480) Resolution at MPEG4 mode.
| SD Memory Slot
VGA (640 x 480)
3 Mega Pixel (2048 x 1536)
User can select important images to be recorded to the SD memory card such as: Alarm Events, Motion Detection or Time Scheduled Events. Using the WebViewer or Net-i software, you can remotely access the images from the SD card installed in the SNC-M300.
| Various Mega Pixel Resolution Samsung Mega Pixel Camera SNC-M300 provides 1.3M, 2M and 3M pixel resolution by selectable configuration.
IP Installer Software Upgrade Access Level Time Setting Language SDK
Schedule IP Address Installation Firmware Upgrade Login Access Level
HTTP API CGI Command Windows API Hardware Input/Output sockets Operating Temperature Operating Humidity Power Requirement LED Indicator Dimensions Weight Body Color
Progressive QXGA 1/2" 3 Mega Pixel CMOS Internal MJPEG : 2048x1536, 1600x1200, 1280x1024 / MPEG4 : 640x480 N/A Embedded Linux Windows XP, VISTA 1CH WebBrowser Viewer(Default), Net-i Professional 1.0 S/W Internet Explorer 6.0 Higher MPEG4 ,MJPEG, G.711 32M byte 128M byte 10/100BASE-T TCP, UDP, NTP, HTTP, DHCP, FTP, SMTP TCP, UDP(Unicast, Multicast) Supporting Samsung DDNS and Public DDNS Servers 3 MegaPixel (2048 X 1536) 2 MegaPixel (1600 X 1200) 1.3 MegaPixel (1280 X 1024) VGA (640x480) Only 3 MegaPixel : 12, 6, 3, 1 FPS 2 MegaPixel : 19, 10, 5, 1 FPS 1.3 MegaPixel : 25, 13, 6, 1 FPS Same as MJPEG Framerate @ VGA Very High, High, Normal, Low, Very Low High, Medium, Low 2-Way Max 10 Users at Unicast Mode Input : 2, Output : 2 Image Transfer : FTP, E-mail / Notification : Notify to Viewer Alarm Out / Recording : SD/SDHC Card Image Transfer : FTP, E-mail / Notification : Notify to Viewer Alarm Out / Recording : SD/SDHC Card Image Transfer : FTP, E-mail / Recording : SD/SDHC Card IP Installation Function ( XP, VISTA support ) Firmware Upgrade by Web Browser Administrator, Operator, User NTP Time Sync, PC Time Sync, Manual Setting Multiple Language GUI Support Provides Functionality to Control Cameras and Set/Retrieve Internal Parameter Values. Windows API for Viewing Data Streams from Network Camera. Power(2-Pin Term), RJ-45, SD Card Slot, Terminal 6Pin( Alarm In 2Pin, Alarm Out 2Pin, GND) 14˚ F~122˚ F(0˚ C~50˚ C) 20% ~ 85% RH AC24V(60/50Hz)/DC12V/ PoE 3 ea 83(W) x 60.9(H) x 147.4(D)mm 0.42Kg Silver
| Dimensions (unit:mm)
* SNC-M300 is compatible with SD and SDHC standard. * SNC-M300 can support up to 16GB capacity of SDHC memory. 1.3M (1280x1024)
2M (1600x1200)
3M (2048x1536)
96 / 97 SAMSUNG VIDEO SECURITY SYSTEM I NETWORK
3 Mega-Pixel Network Camera
SNC-M300
NEW
| Specifications Model Camera
Environment Client S/W Browser Compression Network Hardware Network
| Features
| Dual Encoding / Streaming
• 3 mega pixel network camera • MPEG-4 & motion JPEG dual encoding and streaming simultaneously • 1.3 / 2 / 3 mega pixel resolution (selectable) • Video motion detection • Pre/post alarm image buffering • DDNS support • Power over ethernet (PoE) support • Bi-directional audio support • SD memory card slot for alarm image recording
With dual-encoding capability, SNC-M300 can generate and transfer both MJPEG and MPEG4 images simultaneously. This dual encoding and streaming capability is useful for transferring MPEG4 images over limited network bandwidth, while also storing high resolution MJPEG Images to the Nertwork Recording Software or NVR device.
MJPEG
High Bandwidth Network Recording
SNC-M300 Scanning System Image Device Synchronizing System Resolution Video Output (BNC) Network Board OS Client Viewer OS
Video Resolution
Web Browser Audio & Video Codec Flash Memory SDRAM Ethernet Network Protocol Network Protocol Streaming DDNS NTSC/PAL MJPEG
Frame Rate
NTSC/PAL
MPEG4 MJPEG
MPEG4 Video Quality Motion Detection Sensitivity Audio ADPCM Connection Users Alarm I/O Alarm Event Alarm Input
G.711
Motion Detection MPEG4
| 3 Mega Pixel Resolution
Low Band width Network Web
With mega pixel resolution, SNC-M300 delivers sharp and vivid images for high-end surveillance and security monitoring.
* SNC-M300 supports only VGA(640x480) Resolution at MPEG4 mode.
| SD Memory Slot
VGA (640 x 480)
3 Mega Pixel (2048 x 1536)
User can select important images to be recorded to the SD memory card such as: Alarm Events, Motion Detection or Time Scheduled Events. Using the WebViewer or Net-i software, you can remotely access the images from the SD card installed in the SNC-M300.
| Various Mega Pixel Resolution Samsung Mega Pixel Camera SNC-M300 provides 1.3M, 2M and 3M pixel resolution by selectable configuration.
IP Installer Software Upgrade Access Level Time Setting Language SDK
Schedule IP Address Installation Firmware Upgrade Login Access Level
HTTP API CGI Command Windows API Hardware Input/Output sockets Operating Temperature Operating Humidity Power Requirement LED Indicator Dimensions Weight Body Color
Progressive QXGA 1/2" 3 Mega Pixel CMOS Internal MJPEG : 2048x1536, 1600x1200, 1280x1024 / MPEG4 : 640x480 N/A Embedded Linux Windows XP, VISTA 1CH WebBrowser Viewer(Default), Net-i Professional 1.0 S/W Internet Explorer 6.0 Higher MPEG4 ,MJPEG, G.711 32M byte 128M byte 10/100BASE-T TCP, UDP, NTP, HTTP, DHCP, FTP, SMTP TCP, UDP(Unicast, Multicast) Supporting Samsung DDNS and Public DDNS Servers 3 MegaPixel (2048 X 1536) 2 MegaPixel (1600 X 1200) 1.3 MegaPixel (1280 X 1024) VGA (640x480) Only 3 MegaPixel : 12, 6, 3, 1 FPS 2 MegaPixel : 19, 10, 5, 1 FPS 1.3 MegaPixel : 25, 13, 6, 1 FPS Same as MJPEG Framerate @ VGA Very High, High, Normal, Low, Very Low High, Medium, Low 2-Way Max 10 Users at Unicast Mode Input : 2, Output : 2 Image Transfer : FTP, E-mail / Notification : Notify to Viewer Alarm Out / Recording : SD/SDHC Card Image Transfer : FTP, E-mail / Notification : Notify to Viewer Alarm Out / Recording : SD/SDHC Card Image Transfer : FTP, E-mail / Recording : SD/SDHC Card IP Installation Function ( XP, VISTA support ) Firmware Upgrade by Web Browser Administrator, Operator, User NTP Time Sync, PC Time Sync, Manual Setting Multiple Language GUI Support Provides Functionality to Control Cameras and Set/Retrieve Internal Parameter Values. Windows API for Viewing Data Streams from Network Camera. Power(2-Pin Term), RJ-45, SD Card Slot, Terminal 6Pin( Alarm In 2Pin, Alarm Out 2Pin, GND) 14˚ F~122˚ F(0˚ C~50˚ C) 20% ~ 85% RH AC24V(60/50Hz)/DC12V/ PoE 3 ea 83(W) x 60.9(H) x 147.4(D)mm 0.42Kg Silver
| Dimensions (unit:mm)
* SNC-M300 is compatible with SD and SDHC standard. * SNC-M300 can support up to 16GB capacity of SDHC memory. 1.3M (1280x1024)
2M (1600x1200)
3M (2048x1536)
96 / 97 SAMSUNG VIDEO SECURITY SYSTEM I NETWORK
