Transcript
router
QUICK-START GUIDE As used with Thinklogical’s™ Velocitykvm-24D Dual Data Port Fiber Extension System
VX40
The VX40 Router Critical Hardware Alarms: (Located at the top, left rear of the unit.) 1 2 3 4 5 6 7 8 9 10
KVM Matrix Switch Powered by
MRTS Technology
Complete steps 1 through 8 9 to connect your Thinklogical™ VX40 Router KVM Matrix Switch
Thinklogical’s™ VX40 KVM Matrix Switch features redundant Power Supplies and Controller Modules for uninterrupted performance, even during system reconfiguration, updates or debug. The VX40 remains fully functional with only one Power Supply installed or with one Controller activated. NOTE: When using a single Controller, the module on the left (Primary) must be used.
POWER SUPPLY 1 (LEFT): Fan failure, temperature spikes, DC voltage and/or current out of range, AC power input interruption and module removed POWER SUPPLY 2 (RIGHT): Fan failure, temperature spikes, DC voltage and/or current out of range, AC power input interruption and module removed FANS: Individual fan monitoring TEMPERATURE WARNING: Chassis over temperature, multiple sensors TEMPERATURE SHUTDOWN: Chassis over temperature causing shutdown CPU: Card failure (Only with a redundant card) INPUT/OUTPUT CARDS: SFP+ failure, laser output fault ANY OF THE ABOVE COMMON GROUND
8 STEP 8: Connect both supplied AC Power Cords (PWR-0000006-R) to the receptacles located on the VX40's power supplies. Plug each one into a standard AC source. Verify that all system functions are operating properly.
STEP 1: Connect your VelocityKVM-24 Dual Data Port Receiver to the VX40 using multi-mode fiber-optic cables (up to 1000 meters). Connect L1 and L3 to any Downstream Transmit Ports. Connect K1 to any Downstream Receive Port and K2 to the same numbered Downstream Transmit Port. STEP 2: Ensure that the Receiver’s ON/OFF switch is in the OFF (0) position. Insert the AC power cord into the Receiver and plug it into a standard AC source. Turn the unit ON. STEP 3: Depending on your configuration, connect your desktop devices (monitors, keyboard, mouse, stereo 3D, etc.) to the Receiver using standard cables as shown in the examples below. Turn all the devices ON. Stereo 3D Emitter OUT
L1: Video 1 L3: Video 2 K1: Data RX to TX K2: Data Tx to Rx
1
4
2
Local Keyboard and Mouse to PS2 or USB HID Ports
VEL-00DM24-LCTX Velocity-24 Dual Data Port Transmitter
Optional Secondary Controller Card IP address: 192.168.13.16
Primary Controller Card IP Address: 192.168.13.15
External Control CPU
USB 2.0
DVI IN 1
5
Stereo 3-D ◄Audio IN
PS2 Mouse USB HID
Local DVI OUT 1
DVI OUT 1 DDC
DVI OUT 1
DVI OUT 2 DDC
DVI OUT 2
STEP 5: Ensure that the Transmitter’s ON/OFF switch is in the OFF (0) position. Insert the AC power cord into the Transmitter and plug it into a standard AC source. Turn the unit ON.
PS2 Keyboard
Source CPU
Keyboard and Mouse to PS2 or USB HID Ports
Network Hub
STEP 4: Connect your VelocityKVM-24 Dual Data Port Transmitter to the VX40 using multi-mode fiber-optic cables (up to 1000 meters). Connect L1 and L3 to any Upstream Receive Ports. Connect K1 to any Upstream Transmit Port and K2 to the same numbered Upstream Receive Port.
6
Audio OUT►
3
USB 2.0 OUT
7
DVI IN 2
VelocityKVM-24D Receiver VEL-00DM24-LCRX
STEP 6: Connect the DVI cables from the Source CPU to the Transmitter’s DVI IN 1 and 2 Ports. If desired, connect a local monitor to each of the Transmitter’s two DVI OUT ports with standard DVI cables. Connect an optional Keyboard & Mouse to the local USB or PS2 Ports. Connect your peripheral devices from their source to the Transmitter Inputs with standard copper cables. Ensure the CPU is turned ON.
Local DVI OUT 2
STEP 7: Connect the VX40 Controller Cards’ LAN Ports to your Controller CPU with CAT5 cables. (CPU IP address: 192.168.13.9) Copyright © 2011. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
Extend
Distribute
Innovate
PHONE: WEBSITE: EMAIL:
1-800-291-3211 www.thinklogical.com
[email protected]
VX40_Vel-24D_QSG
Visit us online at www.thinklogical.com for more product information, current updates and the complete line of Thinklogical™ products.
