Transcript
WOO AUDIO WA7 Fireflies Pure Class-A Single-ended Vacuum Tube Headphone Amplifier & 32-Bit/192kHz Digital to Analog Convertor
Owner’s Manual Please review this manual before operating your WOO AUDIO™ product.
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
1
Important Safety Information
CAUTION: Amplifiers are shipped without the vacuum tubes installed. The end user must install the tubes, taking great care to install them correctly in the appropriate sockets. Incorrect installation will result in serious damage not covered by the warranty.
Turn off immediately in the event of malfunction! Should you notice smoke or an unusual smell coming from the equipment, turn it off immediately. Continued operation could result in injury.
Do not disassemble The unit contains high voltage circuitry. Touching the amplifier’s internal parts may result in injury. In the event of malfunction. the product should be repaired only by a qualified technician.
Keep out of children Failure to observe this precaution could result in injury
WARNING: Failure to follow these instructions could result in fire, electric shock, or other injury or damage.
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
2
Table of Contents
IMPORTANT SAFETY INFORMATION
2
TABLE OF CONTENTS
3
OVERVIEW
4
GETTING STARTED
6
QUICK INSTALLATION
9
OPERATIONS
12
FAQ - FREQUENTLY ASKED QUESTIONS
13
WARRANTY AND SERVICE
14
PRODUCT SPECIFICATION
15
REVIEWS
16
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
3
Overview The WOO Audio WA7 “Fireflies” Amp/DAC is a combination of high performance vacuum tube headphone amplifier with a built-in USB Digital-to-Analog Converter. It employs a pure tube design, utilizing 6C45 tubes in a class-A, single-ended topology, with transformer coupled outputs. No semi-conductors used in the entire signal path. The D-A converter is designed to be capable of up to 32-bit/192k sampling rates. Pure data integrity is maintained while it is transmitted via standard high speed USB 2.0 interface operating in asynchronous mode.
The high quality construction features include a pair of Nickel Alloy core output transformers, all-aluminum chassis with no screws visible from any viewing angles, a linear external power supply for amplification circuitries, a custom built toroidal power transformer, and multi-layer military grade PCBs.
The dedicated port for in-ear-monitors carries a full range of volume controls ensuring minimal noise. Despite its incredibly compact size, “Fireflies” is a power-house with the capacity to drive almost any demanding audiophile headphones. To accommodate different system setup needs, “Fireflies” can also be used as a stand-alone D-A Converter.
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
4
Features: o
Handmade output transformer with Nickel Alloy core
o
32-Bit, 192kHz high resolution playback
o
Ultra-low jitter USB 2.0 runs on Asynchronous mode
o
High and low impedance output facilitated via toggle switch on back panel
o
Open load protection will automatically engage to prevent the amp from damaging when no headphones are plugged in
o
Multi-functional switch for USB input, RCA input, and RCA output via D-A.
o
The RCA connectors can be used either as RCA analog inputs or USB DAC line-out outputs.
o
All-aluminum chassis with no screws visible from any viewing angles
o
High clarity tube protection glass
o
Multi-layer military grade PCBs
o
Customized driver for Windows Vista/XP/7/8
o
USB Audio Class 2.0 is natively supported by Apple OS X version 10.6.4 and above without installing driver
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
5
Getting Started What’s in the box? ② ①
③
⑤ ⑥
④
⑦
① Umbilical DC Power Cord ② Micro-fiber Polishing Cloth for glass and metal cleaning ③ Anti-slip silicone rubber glass pads (4pcs) ④ External Power Supply ⑤ Tube Protection Glass ⑥ WA7 Fireflies Amplifier * USB, AC power cord, and inter-connection cables are not included.
⑦ 6C45 Matched Pair Tubes tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
6
Front Panel
⑦ Volume control for headphone outputs ⑧ 3.5mm or 1/8” mini In-Ear-Monitors
7
headphone jack 8
9 ⑨ 6.35mm or 1/4"headphone jack
Top Panel ⑩ Tube sockets for 6C45 vacuum tubes Please pay close attention to vacuum tube installation alignment marks!
10
⑪ USB 2.0 digital input ⑫ RCA analog input
Back Panel
⑬ Input-output switch RCA –RCA analog input USB – USB 2.0 digital input D/A – Digital to Analog output via RCA ⑭ High and low headphone impedance switch 13
HI-Z – High impedance LO-Z – Low impedance
12 11
⑮ Umbilical power cord socket (male) ⑯ Power switch I – ON O - OFF
14
15
16
tm
©2013 WOO AUDIO Inc. All rights reserved.
The RCA connectors can be used either as RCA analog inputs or USB DAC RCA line-out outputs.
www.wooaudio.com
Rev 1.2. April, 2013
7
External Power Supply DC power connection
External Power Supply AC power connection
13
11 14 12
⑪ Umbilical cord socket (female)
⑪ AC power inlet
⑫ Power LED light
⑫ Fuse box slow blow fuse, 400mA@115V or 200mA@230V
Connections The WA7 Firflies can be connected in one of the following ways.
A USB 2.0
RCA line-out to active monitors
Computer
B
RCA line-out to power amp
RCA
RCA
CD player or analog source
C USB 2.0 Computer
tm
Digital-to-Analog Convertor
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
IEMs
Rev 1.2. April, 2013
Full-sized headphones
8
Quick Installation Installing tubes
Align the tube in the tube socket according to the RED arrows
20
Umbilical Power Cord Installation Connecting the Amplifier unit Align the female plug to the DC input connector. The “arrow” marking on the plug should face up when it is properly oriented. Insert the plug into the socket and turn the locking ring on the plug until fully tightened.
tm
©2013 WOO AUDIO Inc. All rights reserved.
Hold the tube firmly, slowly inserting it down into the socket. Care must be taken to only apply force perpendicular to the tube socket; never insert it at an angle. Apply a slight rocking motion for the tube which is harder to insert; but, never apply circular motion
Connecting the Power Supply unit Align the male plug to the DC input connector. The arrow marking on the plug should face up when it is properly oriented. Insert the plug into the socket and turn the locking ring on the plug until fully tightened.
www.wooaudio.com
Rev 1.2. April, 2013
9
Installing the AC power cord (customer supplied): Plug the power cord into the AC inlet; see ⑬ in the above diagram. The AC inlet socket is a standard IEC type. You will need to obtain the correct type for your region if it not supplied with your order.
European
U.S.
U.K.
Installing Tube Protection Glass: Do not hit the tubes by the glass. The glass is heavy. Handle with both hands.
Powering Up To power up on the WA7 Fireflies, flip the power switch ⑯ to the “I” position. The LED on the power supply will lit. Vacuum tubes should lit at the same time.
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
10
Using the Asynchronous USB 2.0 port: The WA7 Fireflies offers a USB 2.0 port ⑪, refer to the above diagram, which is compatible with Windows or Mac OS computer.
Installing the USB driver *These steps only apply for Windows 7. 1.
Plug in the USB 2.0 cable to the WA7 Fireflies and your computer.
2. Install the WA7 Fireflies Driver from the downloaded file from http://www.wooaudio.com/drivers/wa7-fireflies-driver-1.01.zip 3. Unzip the downloaded file. Locate setup.exe file and run it. 4. Follow on-screen instruction to complete the installation. Windows restart may be required. 5. Set USB Speakers as your default audio output. Go to My Computer -> Control Panel -> Hardware and Sounds -> Sounds -> Click USB Speakers -> Click Set Default
6. Now you're ready to enjoy music from your computer.
Configuring media player TIPS: It is strongly recommended to use a media player that supports ASIO output mode for the highest playback quality. Changing Output mode Example is given for JRiver Media Center. Tools -> Options -> Audio Output -> Output mode -> select ASIO
IMPORTANT: In JRiver Media Center, disable “Use large hardware buffers” option by unchecking the box. Buffering error will occur if this option is enable. Tools -> Options -> Audio Output -> Output mode settings -> uncheck the box below
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
11
Operations NOTE: Only one headphone output is operational at a time. When both headphone jacks are plugged in, only the ¼” output is operational.
DO NOT o Turn on the amp before properly installing ALL tubes and power supply. o Block vent holes of the power supply. o Use tubes that are not approved by Woo Audio. o Align the male plug to the DC input connector. The arrow marking on the plug should face up when it is properly oriented. Insert the plug into the socket and turn the locking ring on the plug until fully tightened. o Remove any tubes or the umbilical power cord while the amp is operating. o Touch tubes (they are extremely hot) after warm-up. o Leave the amp running unattended. (We suggest a maximum of 8 hours of continuous use, allowing the tubes time to cool before using again)
DO o Place the amp away from any wireless or frequency-emitting devices such as mobile phones, PDAs and radios, to avoid noise interference. o Keep away from water or excessive moisture. o Turn off the amp if its sound is abnormal. o Allow a minimum of 2 inches of air clearance for heat dissipation. o Allow approximately 3 minutes of warm-up. o Allow the tubes to cool down before replacing them.
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
12
FAQ - Frequently Asked Questions Computer cannot find the WA7 Fireflies USB DAC. o
Check USB cable connection and make sure the cable is USB 2.0 compatible.
o
See “Installing USB driver” section for configuration.
No sound is coming out of the headphone jack. o
Check you have selected the correct position of the Input-Output switch. Check input connection. Check computer USB output setting if USB input is used.
No sound is coming out of the mini headphone jack. o
Only one headphone is operational at a time. Disconnect headphones from the ¼” jack to enable output of the mini phone jack.
There is static noise, or one channel is dropping out. o
Re-seat all tubes. Make sure that all tubes are securely installed.
The LED does not light. First check if the AC cord is installed. Next, check if the umbilical cord is securely attached between the amp and the power supply. If the fuse is burnt, see the following instruction on how to replace a fuse. The fuse type is 400mA@115V or 200mA@230V, slow blow type.
Insert a small flat screwdriver into the fuse door located on the AC inlet.
tm
Pull the fuse door to open it.
©2013 WOO AUDIO Inc. All rights reserved.
The fuse holder may be released from the AC inlet.
www.wooaudio.com
Replace the burnt fuse with a new one
Rev 1.2. April, 2013
13
Warranty and Service Woo Audio warrants this product free from defects in materials and workmanship for one (1) year from the original date of purchase. The tubes are warranted for 30 days unless otherwise stated. In the event that your Woo Audio product requires servicing, please contact us directly to receive return instructions. Please do not discard original packing materials. If for any reason, the equipment is to be shipped back to Woo Audio, please use the original packaging, including a copy of sales purchase documents and a detailed explanation of the problem(s). Send service inquiry to
[email protected] Any modification not authorized by WOO AUDIO will void this warranty.
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
14
Product Specification Model:
WA7 Fireflies
Headphone amp design
Single-ended, class-A, transformers output
Power supply
Linear external high-performance power supply
Tubes used
One matched pair of 6C45, one tube per channel
USB receiving chipset:
C-Media 6631
DAC chip
TI PCM5102A 32-bit chip
Sampling Rate:
Up to 32-Bit, 192kHz
Inputs:
1 Asynchronous USB2.0, 1 RCA
Outputs:
1 1/4" and 1 1/8" headphone outputs, 1 RCA (same connector as the input)
Headphones impedance
8-600 Ohms
RCA input impedance
100 Kilo-Ohms
Max Output:
Approx. 1 watt @ 32 ohms
Frequency response:
11Hz to 27kHz, +/-0.5dB
Distortion:
<0.03%
S/N:
95dB
Power consumption
25W max
Mains Supply:
100-120V, 220-240V, 50/60Hz, user selectable
Fuse
slow blow fuse, 400mA@115V, or 200mA@230V
Amp body and PSU finish
Anodized Aluminum
Dimension:
AMP: 4.8" L x 4.8" W x 5.1" H with glass PSU: 7" L x 3.5" W x 2.2" H
Weight:
AMP - 5.3 lbs / 2.4kg, Glass - 3.3 lbs / 1.5 kg PSU - 2.8 lbs / 1.4 kg
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
15
Reviews The WA7 is one of the few home headphone amps that sounds great with full-size and in-ear headphones. - Audiophiliac
This is possibly the most linear DAC and headphone amp I've heard. -Positive Feedback
The Woo reaches DEEP, and is POWERFUL. It’s everything you want it to be and just a tad more … because it’s so damn sexy you feel like you stole it from the future somehow. -Humanovation
Appreciable about the WA7 was that whatever headphones or IEMs I used with it, the performance was consistent. -Currawong @ head-fi.org
the WA7 is practically a steal in terms of sound quality and physical presentation. - HP Soundings
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
16
Woo Audio is committed to continuously improve its products. We therefore reserve the right to improve on our design without notice.
tm
©2013 WOO AUDIO Inc. All rights reserved.
www.wooaudio.com
Rev 1.2. April, 2013
17
