Transcript
Walk-Behind Scrubbers
Razor® 20 & 20T The Razor® 20 and 20T – A Cut Above The Razor® 20 and Razor® 20T are classic Kent products: easy to operate, built to last, intelligently designed and environmentally conscious. Onboard battery charging, no-tool squeegee blade replacement and an easy-toclean recovery tank make the Razor 20 and 20T easy to maintain, as well.
Tank cover opens to allow full access for cleaning out recovery tank
Ergonomic, wraparound handle for operator comfort
Anything but basic, the Razor 20 and 20T also feature the kind of time and resource saving features that are a cut above traditional scrubbers. The Razor 20 and 20T are equipped with Kent’s ECO System™. The ECO System automatically controls solution usage, resulting in maximized productivity– over a full hour of cleaning on a single tank. Users will also appreciate the Razor’s two pad pressure settings, enabling operators to switch effortlessly between a run time extending floating head and a fixed head for heavier soil cleaning. And thanks to quiet operation, you can take advantage of all these features day or night. The Razor 20 is propelled by the rotation of the scrub head, while the Razor 20T features a traction drive system with variable speed control. Scrubbing, climbing ramps, and transporting have never been easier, either in forward or reverse. The Razor 20T is equipped with a safe and ergonomic paddle with fingertip control. The added ease of mobility on the Razor 20T translates into increased efficiency, operator comfort, and operator safety.
Standard splash skirt
Variable pad driven assistance
squeegee handle deck handle
ECO System™ setting is designed for high productivity cleaning
Pad pressure is set in either ‘float’ or ‘locked’ position
The Razor® 20 & 20T are perfect for…
Ergonomic, control paddle with fingertip control Front fill solution tank
Edge guide allows operator to clean to wall
Easy access to batteries
Center-pivot squeegee follows turns to pick up dirty solution
– Healthcare Facilities – Office Buildings – Schools – Retail – Assisted Living – Hospitality… and anywhere else the cleaning continues even when people are present
TECHNICAL SPECIFICATIONS
Simple. Clean. Kent commercial cleaning equipment is easy to use
Model Scrub Head Type Scrub Path Max Productivity @ 2.8 mph(4.5 km/hr) Scrub Pressures
Scrub Head Speed Solution Flow Rates ECO System™ variable up to Drive System Squeegee Width Dimensions (w/o squeegee) Weights Without Batteries With Batteries Voltage Power Source Onboard Battery Charger Solution Tank Recovery Tank Scrub Motor Vacuum Motor Sound Level Approvals Part Number
Razor® 20 Razor® 20T Disc – BOTH MODELS 20 in (50.8 cm) pad holder standard, brushes available – BOTH MODELS 24,640 ft2 (2,289 m2) – BOTH MODELS
You can get expert service and maintenance for your products
Two settings up to 57 lb (26 kg) standard; 70 lb (32 kg) with optional extra pressure kit 153 rpm – BOTH MODELS
Two settings 50 lb (23 kg) and 70 lb (32 kg)
0.15 gal/min (0.55 L/min) – BOTH MODELS 0.3 gal/min (1.1 L/min) – BOTH MODELS 0.3 hp (200 W) variable forward and reverse Pad/Brush assist Max speed 2.8 mph (4.5 km/hr), 16% gradeability 29.9 in (75.9 cm) – BOTH MODELS L = 48.3 in (123 cm) / W = 21.3 in (54 cm) / H = 41.7 in (106 cm) – BOTH MODELS 179 lb (81 kg) 212 lb (96 kg) 380 lb (172 kg) 400 lb (181 kg) 24 V – BOTH MODELS (2) 12 V batteries (wet-acid and maintenance free available) – BOTH MODELS 24 V wet-acid/maintenance free compatible – BOTH MODELS 11.1 gal (42 L) – BOTH MODELS 11.1 gal (42 L) – BOTH MODELS 0.65 hp (480 W) – BOTH MODELS 0.44 hp (330 W) – BOTH MODELS 65.8 dB A at operator’s position – BOTH MODELS ETL, CSA, CE – BOTH MODELS 56170035 with two 105 Ah wet-acid batt. 56170037 with two 105 Ah wet-acid batt. 56170036 with two 98 Ah gel batt. 56170038 with two 98 Ah gel batt. Specifications are subject to change without notice.
14600 21st Avenue North Plymouth, Minnesota 55447-3408 www.kenteuroclean.com Phone/800-545-4372 Fax/866-261-4779
recyclable
and made to last.
396 Watline Avenue Mississauga, Ontario, Canada L4Z 1X2 www.kenteuroclean.com Phone/800-668-8400 Fax/800-263-5111
©2007 Kent. Kent is a registered trade name of Nilfisk-Advance, Inc. Form L3009K 9-07
by factory-trained personnel around the world, as well as fast parts delivery. Maintain peak performance with Nilfisk Genuine OEM Parts.
