Transcript
Wal l mount for i Pad Ai r 2 and Sam sung G al ax y Tab A
Installation options, USA
Installation options, America Option
Installation type
Cabling
Power
Page
1
Wall, directly
Concealed cable
110 V
4
2
Wall, directly
Concealed cable
PoE Powered
5
3
Wall
Visible cable
110 V
6
4
Wall
Visible cable
PoE Powered
7
5
Wall, Back box
Concealed cable
PoE Powered
8
6
Wall, Powered Back box
Concealed cable
110 V
9
7
Glass
Visible cable
110 V
10
8
Glass
Visible cable
PoE Powered
11
Note:
Electronics should only be installed in accordance with local regulations. Check with your local electrician before doing so .
ORDER LIST
Installation option 1
From PN hardware: 1 x wall mount 1 x 10 ft or 16 ft USB cable
Wall, directly Concealed cable 110 v powered
From 3rd party: 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+ 1 x Wall mount
+ 1 x Standard Samsung adapter
1 x 10 ft. USB cable
Note:
4
Plug the standard Samsung adapter into a 110 v socket and connect a 10 ft or 16 ft USB cable. Pull the USB cable inside the wall. Drill a hole corresponding to the desired placement of the wall mount and pull the USB cable through the back of the wall mount. Select screws/plugs fit for the wall type and mount the wall mount directly on to the wall.
Installation option 2
ORDER LIST From PN hardware: 1 x wall mount 1 x 10 ft. USB Cable 1 x 5,5 Volt PoE converter
Wall, directly Concealed cable PoE Powered
From 3rd party: 1 x Junction box with lid 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
1 x 5,5 Volt PoE converter
+ 1 x 10 ft. USB cable
1 x wall mount
1 x Junction box Consists of: 1 x Raco 8232 Square Outlet Box With Knockout 4” x 2” 1 x Raco 8752 – 4” Flat Outlet Box Lid
5
Note:
Connect RJ45/PoE cable to PoE converter placed inside a junction box. Connect a 10 ft or 16 ft USB cable to the PoE converter. Pull USB cable inside the wall. Drill a hole corresponding to the desired placement of the wall mount and pull the USB cable through the back of the wall mount. Select screws/plugs fit for the wall type and mount the wall mount directly on to the wall.
Installation option 3
ORDER LIST From PN hardware: 1 x wall mount 1 x 10 ft. USB cable 1 x Wall mount plate
Wall Visible cable 110 W powered
From 3rd party: 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
+
1 x 10 ft. USB cable 1 x Standard Samsung adapter 1 x Wall mount 1 x Wall mount plate
Note:
6
Plug the standard Samsung adapter into a 110 v socket and connect the tablet using a 10 ft or 16 ft USB cable. Mount the wall mount using a Wall mount plate.
Installation option 4
ORDER LIST From PN hardware: 1 x wall mount 1 x 5,5 Volt PoE converter 1 x 10 ft or 16 ft USB cable 1 x Wall mount plate
Wall Visible cable PoE powered
From 3rd party: 1 x Junction box with lid 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
1 x 5,5 Volt PoE converter
+ 1 x 10 ft. USB cable
1 x Wall mount 1 x Wall mount plate 1 x Junction box Consists of: 1 x Raco 8232 Square Outlet Box With Knockout 4” x 2” 1 x Raco 8752 – 4” Flat Outlet Box Lid
7
Note:
Connect RJ45/PoE cable to PoE converter placed inside a Junction box. Use a 10 or 16 ft USB cable to connect PoE converter to tablet. Mount the wall mount by using a wall mount plate.
Installation option 5
ORDER LIST From PN hardware: 1 x wall mount 1 x 5,5 Volt PoE converter 1 x 2 ft or 16 ft USB cable 1 x Back Box Kit
Wall Concealed cable PoE powered Back Box
From 3rd party: 1 x 3 Gang Work box 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
1 x 5,5 Volt PoE converter
+ 1 x 2 ft. USB cable
1 x Wall mount 1 x Wall mount plate 1 x Back box plate
1 x 3 Gang work box Carlon B355R 3-Gang 35 cu. In. PVC Old Work Box
8
Note:
Install a 3-gang Work Box into wall. Connect RJ45/PoE cable to PoE converter placed inside the 3-gang Work Box. Connect the PoE converter to the tablet using a 2 ft USB cable. Mount the wall mount using a Back Box Mount Kit.
Installation option 6
ORDER LIST From PN hardware: 1 x wall mount 1 x 5,5 Volt PoE converter 1 x 2 ft Usb Cable 1 x Back Box kit
Wall Concealed cable 110 v
From 3rd party: 1 x 3 Gang Work Box 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
1 x Standard Samsung adapter
+ 1 x 2 ft. USB cable
1 x Wall mount 1 x Wall mount plate 1 x Back box plate
1 x Powered Back Box Data Comm Electronics 45-0072-WH Recessed Low Voltage Mid-Size Plate with 20 Du
9
Note:
Install a Powered Back Box into wall. Plug the standard Samsung adapter into the Powered Back Box. Connect the adapter to the tablet using a 2 ft USB cable. Mount the wall mount using a Back Box Kit.
Installation option 7
ORDER LIST From PN hardware: 1 x wall mount 1 x 10 ft or 16 ft USB cable 1 x Glass Kit
Glass wall Visible cable 110 V
From 3rd party: 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
+
1 x 10 ft. USB cable 1 x Standard Samsung adapter 1 x Wall mount 1 x Glass Kit
Note:
10
Plug the standard Samsung adapter into a 110 v socket and connect the tablet using a 10 ft or 16 ft USB cable. Mount the wall mount using a Glass Kit.
Installation option 8
ORDER LIST From PN hardware: 1 x wall mount 1 x 5,5 Volt PoE converter 1 x 2 ft or 16 ft USB cable 1 x Glass Kit
Glass wall Visible cable PoE Powered
From 3rd party: 1 x Junction Box with lid 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
1 x 5,5 Volt PoE converter
+ 1 x 10 ft. USB cable
1 x Wall mount 1 x Glass Kit
1 x Junction Box Consists of: 1 x Raco 8232 Square Outlet Box With Knockout 4” x 2” 1 x Raco 8752 – 4” Flat Outlet Box Lid
11
Note:
Connect RJ45/PoE cable to PoE converter placed inside a Junction box. Connect a 10 ft or 16 ft USB cable to the PoE converter. Pull USB cable inside the wall. Drill a hole corresponding to the desired placement of the wall mount and pull the USB cable through the back of the wall mount. Mount the wall mount using a Glass Kit.
Copenhagen, Denmark Froelichsvej 25 DK - 2920 Charlottenlund +45 2840 1515 www.pn-hardware.com
