Wall Plate Inserts - Av-iq

Transcript

2011 PRODUCT OFFERING RCI Custom Products 801 North East Street, Suite 2A, Frederick, MD 21701 301-620-9130 / 800-546-4724 • 301-620-9103 / 800-546-6175 FAX http://www.rcicustom.com • [email protected] 0411 TABLE OF CONTENTS Wall Plates & Panels 2 - 10 • AL Series Aluminum Wall Plates 2-6 • PanelBuilder™ 4 • ALOS Series Over-Sized Wall Plates 6 • ALSZ Series Pre-Sized Wall Panels 7 • ALAP Series Wall Plate Adapter Shims 7 • CR Series Classroom Wall Plates 7 • CS Series Stainless Wall Plates (Contractor Grade) 8 • MI Series Aluminum Modular Wall Plate Inserts 9 • LT Series Extruded & Finished Wall Plates 10 • Custom Wall Plates 10 Rack Panels & Accessories 11 - 15 • Custom Rack Panels 11 • Graphics, Silk-Screening & Branding 11 • Logo Plates and Panels 11 • LED Series Illuminated Logo Panels 11 • RLP Series Multi Function Power Supply/Logo Panels 11 • BP Series Flat Aluminum Blank Rack Filler Panels 12 • BF Series Aluminum Blank Flanged Filler Panels 12 • CSBF Series Steel Blank Flanged Rack Filler Panels (Contractor Grade) 12 • VP Series Aluminum Vented Rack Filler Panels 12 • CSVP Series Steel Vented Flanged Filler Panels (Contractor Grade) 12 • SC Series Polycarbonate Smoked Security Covers 12 • SD-S Series Deep CRS Security Covers 13 • SD-P Series Deep Polycarbonate Smoked Security Covers 13 • RS Series Rack Mount Shelves 13 • HP Series Hinged Rack Mount Component Panels 13 • RP Series Strain Relief and Lacing Panels 13 • RE Series Equipment Mounting Rack Ears 14 • CH Series Custom Rack Mount Chassis 14 • Rack Mounting Hardware 14 Volume Controls With Plates and Panels 14 - 15 • VCCS Series 70V Attenuators On Stainless Wall Plates (Contractor Grade) 14 • VCAL Series 70V Attenuators On Aluminum Wall Plates 14 • VCLT Series 70V Attenuators On Extruded & Finished Wall Plates 15 • VCMI Series 70V Attenuators On Aluminum Modular Inserts 15 • VCBF Series Pre-Prunched Aluminum Rack Mount Attenuator Panels 15 • VC Series Panel & Rack Mount Volume Controls 15 Professional Products 16 - 18 • Press Mults 16 - 17 • Custom Built Press Boxes 17 • MP Series Rack Mount Monitor Panels 17 • MPD Series Media Presenation Pull-Out Drawers 17 • 440 Pro-Adapter 17 • SVGA 2-Port Splitter/Amplifier 17 • PS Series Portable Self-Contained Sound System 17 Partner Products 21 • Bose® Support Products 21 • BSS® Support Products 21 • FSR® Support Products 21 • Crestron® Support Products 21 Enclosures - FSR® Floor Boxes 20 - 22 Enclosures - FE Series Floor Boxes 22 Enclosures - Wall 22 - 23 • EB Series Electrical Box Covers 22 • FSR® WB Series Wall Boxes 22 - 23 Enclosures - Tabletop 23 • SE Series Desktop Sloped Enclosures 23 • FSR® PTB Series Pop Up Table Boxes 23 • FSR® TS-MJ Table Top Mic Input Jack 23 Custom Electronics and Wiring 24 Stage Boxes, Multi-Pair Cables & Wiring 24 • SB Series Stage Boxes 24 • BC Series Stage Box Connectors 24 • FO Series Fan Out Ends 24 • MC Series Multi-Pair Cabling 24 • SR Series Strain Relief (Hanger / Box End) 24 CA Series Cable Assemblies 25 Bulk Connectors 25 -27 • Cable Mount Connectors 25 • Chassis Mount Connectors 26 Custom Metalwork 28 Terms and Conditions 29 About RCI For more than 20 years, RCI Custom Products has provided quality built Professional Audio and Video Connectivity Solutions to systems integrators worldwide. While building a reputation as a leading manufacturer of Custom Wall Plates and Rack Panels, RCI has been recognized for many innovative products and services, such as its world renowned Press Mults, Custom Wiring solutions, MPD board room connectivity, and PanelBuilder™, the first ever online design and pricing software system. A small American business with small business ideals and values, RCI strives for simple goals: quality products, fair pricing, and complete customer satisfaction. At RCI, we believe that the true mark of success is the result of the efforts of employees that care. Our employees know their customers, and take pride in their success. It is our continuing goal to always provide personalized interaction and first-rate customer service. Please use this catalog as it was intended…as a catalyst for your own creativity. And feel free to call our knowledgeable customer service team for help with any of your custom connectivity needs. RCI Custom Products. Custom really is our middle name. Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 1 WALL PLATES AND PANELS AL SerIES Aluminum Wall Plates Provide a rugged and durable mounting surface for Professional AV connectivity. Used in both commercial and residential systems integration, AL Series wall plates are designed to stand up to years of continual service while maintaining an aesthetically pleasing appearance. • Durable 1/8” (11 gauge) aluminum • Anodized or powder coat finish • Standard 1- 6 gang configurations • Custom sizes available • Vertical grain • Double beveled edges, .0635 at 45 degrees • Standard assemblies include parts and engraving • Matching mounting screws supplied • Made in the USA Anodize “BK” Black “CL” Clear Powder Coat “GL” Gold “GR” Gray “PBKTX” Black Textured “PW” White “PI” Ivory FINISH SELECTION: When ordering, replace suffix “xx” with “BK” (Anodized Black), “CL” (Anodized Clear), “GL” (Anodized Gold), “GR” (Anodized Grey), “PBKTX” (Powder Coat Black Textured) , “PW” (Powder Coat White), or PI (Powder Coat Ivory). Custom sizes, configurations, and colors always available. AL SERIES BLANKS AL100 1 gang aluminum wall plate All connectivity shown as solder type unless otherwise noted. Use “FT” suffix for feed through. AL200 2 gang aluminum wall plate AL300 3 gang aluminum wall plate AL400 4 gang aluminum wall plate Standard 1 - 6 Gang Sizes All Listed Finishes CUSTOM SIZES AND FINISHES ARE ALWAYS AVAILABLE AL500 5 gang aluminum wall plate AL600 6 gang aluminum wall plate AL SERIES 1 GANG AL107-xx Decora® style modular punch out, back milled 2 AL108-xx AC outlet punched AL111-xx One Alco mini toggle AL114-xx One McGill 3 pos. rocker switch AL115-xx One Heyco .75” diameter grommet AL116-xx One Heyco 1.25” diameter grommet RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available WALL PLATES AND PANELS Each plate is available with a variety of finish options (see page 2). Includes parts, matching mounting screws and engraving above each device. AL SERIES 1 GANG (continued) AL117-xx One Heyco 1.5” diameter grommet AL118-xx One Heyco 2” diameter grommet AL131-xx One XLR female AL132-xx Two XLR female AL133-xx One XLR male AL134-xx Two XLR male AL138-xx One 1/4” T.R.S. outlet AL139-xx Two RCA AL141-xx One Neutrik Speakon NL4MP AL142-xx Two Neutrik Speakon NL4MP AL151-xx One BNC & two RCA AL152-xx One BNC & two 1/4” T.R.S. AL160-xx One F connector AL161-xx One BNC AL162-xx Two BNC AL163-xx One recessed Canare BNC AL164-xx Two recessed Canare BNC AL167-xx One S Video AL168-xx One fiber optic connector AL170-xx One HDMI F-F AL171-xx One HDMI F-F, one 3.5 mini solder AL172-xx One HDMI F-F, one 3.5 mini solder, one HD15 F-F AL173-xx One HDMI F-F, one BNC F-F, one S-Video F-F AL174-xx One HDMI F-F, one BNC F-F, one S-Video F-F, one RCA F-F AL175-xx One HDMI, five RCA F-F AL179-xx One USB panel coupler, A-A AL180-xx One D-9 female solder type AL181-xx One D-15HD female solder type AL182-xx One HD15 F-screw terminal, one 3.5 mini F-screw terminal AL184-xx One BTX 9532HD and one Ora CJS3 AL185-xx One HD15 F-F, one 3.5 mini solder, one S-Video F-F, one BNC F-F, two RCA solder AL186-xx One RJ45 CAT-5 connector AL187-xx One RJ11 connector AL188-xx Three RJ45 C-5E F-F, one 4-pin Phoenix male (4-pin cable end provided) AL190-xx One each BTX9532HD, Ora CJS3, BTXCV-C410B, BRE, BY Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 3 WALL PLATES AND PANELS Each plate is available with a variety of finish options (see page 2). Includes engraving above each device, parts, and matching mounting screws. AL SERIES 1 GANG (continued) AL193-xx One HD15 F-F, one 3.5 mini solder, one D-9 F-F AL192-xx One each BTX9532HD, BTXCA35FFSP, BTXCV-C410B, BRE, BY AL194-xx One HD15 F-F, one 3.5 mini solder, one RJ45 C-5E F-F AL195-xx One HD15 F-F, one 3.5 mini solder, one RCA F-F AL196-xx One 15 pin to 5 BNC tails & one 3.5 solder back NEED CUSTOM? AL197-xx One each 15 pin to 5 BNC tails 3.5 solder back, RCA to BNC, & two (red/white) RCA • Panel Design and Pricing Made Easy • Intuitive Desktop and Tools • Design Panels Online or Offline • Save Work as DWG, PDF or RCI • Simple Drag and Drop Functionality • Graphics Insertion • Competitive Pricing • Support for Many Popular Manufacturers Products www.rcicustom.com Available only at www.rcicustom.com AL SERIES 2 GANG 4 AL207-xx Decora® style modular punch out, back milled AL208-xx Duplex AC outlet punched AL214-xx Split wall plate, w/ one 2 inch split grommet AL215-xx 2” diameter grommet AL216-xx 2.5” diameter grommet AL217-xx Punched to accept Oxmoor RC-16 (not included) AL232-xx Two XLR female AL234-xx Four XLR female RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available WALL PLATES AND PANELS AL SERIES 2 GANG Each plate is available with a variety of finish options (see page 2). Includes engraving above each device, parts, and matching mounting screws. Anodize FINISH SELECTION: When ordering, replace suffix “xx” with “BK” (Anodized Black), “CL” (Anodized Clear), “GL” (Anodized Gold), “GR” (Anodized Grey), “PBKTX” (Powder Coat Black Textured) , “PW” (Powder Coat White), or PI (Powder Coat Ivory). Custom sizes, configurations, and colors always available. (See page 2.) (continued) Powder Coat Design and price your custom wall plates on PanelBuilder™ “BK” Black “CL” Clear “GL” Gold “GR” Gray “PBKTX” Black Textured “PW” White “PI” Ivory AL235-xx Two XLR male AL236-xx Four XLR male AL238-xx Two NL4MP speakons AL239-xx Four Neutrik Speakon NL4MP AL254-xx Five BNC & two RCA solder AL270-xx Three RCA F-F, one HDMI F-F, two RCA, one DB-9 F-F AL271-xx Two HDMI F-F, two 3.5 mini solder, two VGA F-F AL277-xx Five BNC AL278-xx Five BNC and 1 each red and white feedthrough RCA AL280-xx Four BNC, two RCA, & one D-15HD solder AL281-xx Two HD15 F-F, two 3.5 mini solder AL282-xx Four RCA, two RJ45 CAT-5, & two D-15HD female solder AL290-xx Five each dual binding posts and one 3.5 mm mini jack AL291-xx Six each dual binding posts AL292-xx One each 9532HD, 3.5 solder, S-video. BNC, red and white F/T RCA AL293-xx One each 9532HD, 3.5 solder, punchdown RJ-45, and yellow, red, and white F/T RCA Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 5 AL SERIES 3-6 GANG WALL PLATES AND PANELS AL307-xx 3 gang w/ Decora® style modular punch out, back milled AL314-xx 3 gang split wall plate, w/ one 2 inch split grommet AL336-xx 3 gang w/ six XLR female AL370-xx 3 gang w/ 1-BNC F-F, one HD15 F-F, 2 RCA solder, one 3.5 mini solder, one USB A-A AL387-xx 3 gang w/ two each XLR female, Combo, NL4 MP AL389-xx 3 gang w/ one DVI, one S-Video, one Comp. Video, three pair RCA Audio L&R AL407-xx 4 gang Decora® style modular punch out, back milled AL410-xx 4 gang w/ six XLR female, two Combo, one Neutrik RJ45 AL411-xx 4 gang w/ five Canare recessed BNC, one each HD 15, stereo mini, USB, Neutrik RJ45 Anodize BK AL415-xx 4 gang split wall plate, w/ two 2 inch split grommet AL414-xx 4 gang split wall plate, w/ one 2 inch split grommet CL Powder Coat GL GR BKTX PW PI FINISH SELECTION: When ordering, replace suffix “xx” with “BK” (Anodized Black), “CL” (Anodized Clear), “GL” (Anodized Gold), “GR” (Anodized Grey), “PBKTX” (Powder Coat Black Textured) , “PW” (Powder Coat White), or PI (Powder Coat Ivory). Custom sizes, configurations, and colors always available. (See page 2.) MI Series Modular Wall Plate Inserts See page 9 AL507-xx 5 gang Decora® style modular punch out, back milled AL607-xx 6 gang Decora® style modular punch out, back milled ALOS Series Aluminum Oversized Wall Plates ALOS Series Oversized Wall Plates are designed to provide a convenient and aesthetically pleasing method of applying a wall plate on an electrical wall box where the sheet rock cutout is too large or the finished wall surface is blemished. These oversized aluminum wall plates are identical to the standard AL Series wall plates, except they are 1” taller and 1” wider. • Durable 1/8” (11 gauge) aluminum * Dimensions are 1” taller and 1” wider than conventional wall plates • Standard 1- 6 gang configurations • Standard assemblies include parts and engraving • Double beveled edges, .0635 at 45 degrees • Matching mounting screws supplied • Finishes include black or clear anodize, white and ivory powder coat Part # ALOS100xx ALOS200xx ALOS300xx ALOS400xx ALOS500xx ALOS600xx 6 Description 1 gang, over-sized by 1" H, 1" V 2 gang, over-sized by 1" H, 1" V 3 gang, over-sized by 1" H, 1" V 4 gang, over-sized by 1" H, 1" V 5 gang, over-sized by 1" H, 1" V 6 gang, over-sized by 1" H, 1" V (3.75" x 5.50") (5.56" x 5.50") (7.375" x 5.50") (9.187" x 5.50") (11.00" x 5.50") (12.812" x 5.50") FINISH SELECTION: When ordering, replace suffix “xx” with “BK” (Anodized Black), “CL” (Anodized Clear), “PW” (Powder Coat White), or “PI” (Powder Coat Ivory). Custom sizes, configurations, and colors always available. (See page 2.) RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available WALL PLATES AND PANELS ALSZ Series Pre-Sized Aluminum Panels ALSZ Series Pre-sized Aluminum Panels are designed for convenient installation with standard electrical style back boxes. These rugged panels come standard in two anodize or three powder coat finishes to meet the architectural needs of most any project. Custom engraved lettering can be easily specified and filled with contrasting colors. • Sized panels made from 1/8” aluminum • Sized to fit standard NEMA® type boxes • Finishes include black or clear anodize, white, ivory and black powder coat • With or without beveled edges • Engraved and filled custom lettering • Available with or without components • With or without mounting holes • Configure and label using our online PanelBuilder™ software • Custom colors and sizes always available Part # ALSZ4X4xx ALSZ5X5xx ALSZ6X6xx ALSZ8X8xx ALSZ10X10xx ALSZ12X12xx ALSZ13X13xx ALSZ16X16xx Description 4"x4" aluminum panel 5"x5" aluminum panel 6"x6" aluminum panel 8"x8" aluminum panel 10"x10" aluminum panel 12"x12" aluminum panel 13"x13" aluminum panel 16"x16" aluminum panel Part # ALSZ18X18xx ALSZ24X24xx ALSZ12X16xx ALSZ12X20xx ALSZ8X10xx ALSZ10X12xx ALSZ14X18xx ALSZ14X22xx Description 18"x18" aluminum panel 24"x24" aluminum panel 12"x16" aluminum panel 12"x20" aluminum panel 8"x10" aluminum panel 10"x12" aluminum panel 14"x18" aluminum panel 14"x22" aluminum panel Design and price your ALSZ Panels on PanelBuilder™ FINISH SELECTION: When ordering, replace suffix “xx” with “BK” (Anodized Black), “CL” (Anodized Clear), “PW” (Powder Coat White), “PI” (Powder Coat Ivory), or “PBKTX” (Powder Coat Black Textured). Custom sizes, configurations, and colors always available. (See page 2.) ALAP SERIES WALL PLATE ADAPTER SHIMS Use Flat Plates on Any Wall! Plate Adapters are designed to fit behind RCI AL series wall plates to accommodate installations where electrical outlet boxes are not installed flush in the wall. The adapters fit between the plate and the wall to “shim out” any gaps that exist in uneven wall box installations. ALAP1GBK • 1/16” aluminum stand off plate • Offered in 1 and 2 gang configurations • Available in black or clear anodized or white or ivory powder coat finish • Formed edges 5/16” deep at 90 degrees • Compensates for EO boxes that are not flush with the wall • Accommodates high quality RCI AL Series aluminum plates used to trim out devices attached to a wall box • May be stacked to increase useable depth of box Part # Description ALAP1Gxx 1 gang, wall plate adapter shim, 5/16" deep ALAP2Gxx 2 gang, wall plate adapter shim, 5/16" deep ALAP2GBK FINISH SELECTION: When ordering, replace suffix “xx” with “BK” (Anodized Black), “CL” (Anodized Clear), “PW” (Powder Coat White), “PI” (Powder Coat Ivory), or “PBKTX” (Powder Coat Black Textured). Custom configurations and colors always available. (See page 2.) CR Series Classroom Control Wall Plates The clear choice when a classroom project demands an aesthetically pleasing yet rugged, high quality control plate. Each plate includes pre-mounted connectors, labelling, and fits a standard depth 2 gang E.O. box. The 1/8” aluminum wall plate is finished in a high quality and durable black anodized finish. Aluminum classroom wall plates models have engraved text and stainless steel classroom wall plates have silk screened text. • Standard plate, 2 gang size • Matching mounting hardware included • Multiple connectors allow audio/visual control in classrooms Part # CR201BK CR202BK CR203BK CR220SS Description 2 gang, black anodized aluminum, w/ two Speakon 4 pole, HD-15 F/F, RCA F/F, S-video F/F, two F conn. 2 gang, black anodized aluminum, w/ two F conn., RJ45 CAT6, 1/8" mini phone solder type, S-video, HD-15 F/F, five RCA F/F for component and composite video and audio 2 gang, black anodized aluminum, w/ F conn. M/M, RJ45 CAT6 Ethercon, 1/8" mini phone solder type, HD-15 F/F, five RCA F/F for composite video and audio 2 gang, brushed stainless steel, w/ HD-15 F/F, two F conn., three RCA F/F for composite video, two grommetted 1/2" holes for cable or connector mounting CR201BK Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 7 WALL PLATES AND PANELS CS Series contractor grade Wall Plates Contractor Series Wall Plates are the RCI value option. Available in select 1 and 2 gang configurations, plates are made with durable brushed 22 gauge stainless steel, providing a rugged commercial grade wall plate while maintaining an aesthetically pleasing appearance. Assemblies are provided with no logo, engraving or silk screening, except where shown. Matching mounting hardware and packaging is included. • Contractor grade wall plates • 22 gauge # 403 stainless steel • Vertically brushed finish • Offered in 1 and 2 gang sized wall plates • Complete with connectors • No engraving or screen graphics CS115 One 1/2” grommet CS116 One 1” grommet CS117 One 1 1/2” grommet CS131 One XLR female CS132 Two XLR female CS133 One XLR male CS134 Two XLR male CS159 Two barrel F connectors CS160 One barrel F connector CS161 One BNC connector CS170 One HDMI F-F CS171 One HDMI F-F, one 3.5 mini solder CS172 One HDMI F-F, one 3.5 mini solder, one HD15 F-F CS179 One USB panel coupler, A-A CS180 One D-9 solder type connector CS180-FT One D-9 feedthrough connector CS181 One D-15HD solder type connector CS181-FT One D-15HD feedthrough connector CS185 One D-15HD solder type connector, & one RJ45 CAT-5 connector CS186 One RJ45 CAT-5 connector CS187 One HD15 feedthru and one 3.5 stereo mini plug solder type CS194 One HD15 F-F, one 3.5 mini solder, one RJ45 C-5E F-F CS195 One HD15 F-F, one 3.5 mini solder, one RCA F-F CS216 One 2.5” diameter grommet CS222 Punched for volume control & selector switch, complete with dial numerals, no parts (Order Volume Controls page 15) CS235 Four XLR male connectors CS236 Four XLR female connectors Custom Design Options Are Always Available CS271 Two HDMI F-F, two 3.5 mini solder, two VGA F-F 8 CS275 Four BNC barrel bulkhead (silk screened R, G, B, S) CS277 Five BNC (silk screened R, G, B, H, V) CS281 Two HD15 F-F, two 3.5 mini solder www.rcicustom.com RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available WALL PLATES AND PANELS MI Series Aluminum Modular Wall Plate Inserts Designed to provide a convenient and reliable connectivity option while maintaining an aesthetically pleasing appearance in any commercial or consumer installation. MI Series Aluminum Inserts are both rugged and durable, and will not crack or break under heavy use like most available plastic modular inserts. • Rigid 11 gauge milled aluminum • Fits RCI and standard Decora® style wall plates • Anodized or powder coat finishes • Complete with installed connectors • Devices include engraving • Commercial duty - withstands rugged use • Unique design provides more space, allowing for larger variety of configurations FINISH SELECTION: When ordering, replace suffix “xx” with “BK” (Anodized Black), “CL” (Anodized Clear), “PW” (Powder Coat White), “PI” (Powder Coat Ivory), or “PBKTX” (Powder Coat Black Textured). Custom configurations and colors always available. (See page 2.) MI100xx Modular Insert, blank MI103-25xx 70V 25 watt attenuator, with knob MI103-50xx MI103-100xx MI121xx MI131xx MI120xx 70V 50 watt attenuator, 70V 100 watt attenuator, One mini 3.5 solder style One mini 3.5 solder style One Neutrik NC3FDL1, with knob with knob female, includes engraving MI132xx Two Neutrik NC3FDL1, female, includes engraving MI133xx One Neutrik NC3MDL1, male, includes engraving MI134xx Two Neutrik NC3MDL1, male, includes engraving MI138xx One Switchcraft 12B T.R.S., includes engraving MI139xx Two RCA, solder type, one- red, one- white, includes engraving MI140xx Two RCA, solder type, one- red, one- white, & one- RCA feedthru yellow, includes engraving MI159xx Two F feedthru connector, includes engraving MI160xx One F feedthru connector, includes engraving MI161xx One BNC bulkhead, includes engraving MI162xx Two BNC bulkhead, includes engraving MI167xx One S video (BTX TCS415BHG), includes engraving MI170xx One HDMI F-F MI175xx One 5-way binding post (red/ black), includes engraving MI176xx MI179xx Two 5-way binding post One USB connector, (red/ black), includes includes engraving engraving MI180-FTxx One 9 pin F-F (BTX9530), includes engraving MI181-FTxx One HD15 (BTX9532HD), includes engraving MI183xx One HD15 & two RCA (red & white), includes engraving MI184xx One HD15 & one 1/8” mini solder type, includes engraving MI185xx One HD15 & one RJ45 punchdown, includes engraving MI186xx One RJ45 punchdown, includes engraving MI190xx One Firewire, includes engraving MI191xx One DVI F-F feedthru, includes engraving MI141xx One Neutrik speakon NL4MP, includes engraving MI142xx Two Neutrik speakon NL4MP, includes engraving Wall Plates For Use With MI Series Inserts (see AL Series Wall Plates, p. 2 - 6) AL107xx AL207xx AL507xx AL607xx AL307xx AL407xx Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 9 WALL PLATES AND PANELS LT SERIES EXTRUDED & FINISHED WALL PLATES Stamped Wall Plates w/ Various Metals & Finishes Designed to provide a rugged and durable mounting surface for professional AV connectivity. Used in both commercial and residential systems integration, LT Series wall plates are designed to look good and last! • Extruded 20 gauge wall plates • Available in 1- 6 gang sizes • Seven standard high-quality finishes • Plates include matching mounting screws • Standard assemblies include parts and engraving • Custom configurations always available Note: LT Series Wall Plates are available in all the same standard configurations as “AL” Series, pages 2 - 6*. May also be ordered in any custom configuration with PanelBuilder™! Stainless Steel Satin Brass *Simply replace "AL" with "LT" when ordering Polished Brass Mirror Chrome Bank Bronze Antique “Statuary” Bronze Satin Bronze CUSTOM PLATES The original and leading Custom Panel Manufacturer, no other company provides more options, or makes it easier to design and build your custom products than RCI. Send your hand drawings, bid spec documents, or drawings from AutoCad® or other design packages for a prompt, competitive quote.. Design and Order with PanelBuilder™ The first design and quote software package of its kind is available to all authorized RCI Custom dealers. Simple drag and drop technology provides professional DWG and PDF drawings and quotes in real time. Plates, panels and more. Download at www.rcicustom.com.. Place your order online and save! • Any Size Standard or Custom Panel • Support for Leading Floor Box Manufacturers • Aluminum, Steel or Brass • Finish options include Anodize, Powder Coat, Paint • Custom Polished Finishes • Antiqued Brass and Bronze • Audio, Video, Data Connectivity • Engraving, Silk Screen, and Print Graphics 10 www.rcicustom.com RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available CUSTOM PANELS CUSTOM RACK PANELS Made to your specifications. • Any Size Standard or Custom Panel • Flat or Flanged Panels • Aluminum, Steel or Brass • Finish options include Anodize, Powder Coat, Paint • Audio, Video, Data Connectivity • Engraving, Silk Screen, and Print Graphics Graphics, Silk Screening & branding Almost anything is possible... If you need help with your design or layout, please call our Customer Service Representatives. Custom graphics require customer supplied art work (1:1 ratio preferred). One time screen charge may apply. Custom engraving and fill Logo plates and panels Promote your business, brand, web site, or service info with professional quality graphics. Standard products include wall plate logo placement (any size plate) and rack panels with one or two color screens. Multi colors and printing on any size panel are available as custom work. Contact Customer Service for assistance, 800-546-4724. Part # SCREENFAB LOGOWP-1C LOGOWP-2C LOGOWP-3C LOGO1RU-1C LOGO2RU-1C LOGO1RU-2C LOGO2RU-2C Description One time silk screen set up charge 1 color silk screen on any size wall plate (wall plate NOT included) 2 color silk screen on any size wall plate (wall plate NOT included) 3 color silk screen on any size wall plate (wall plate NOT included) 1 color silk screen on 1 RU panel (black anodized panel included) 1 color silk screen on 2 RU panel (black anodized panel included) 2 color silk screen on 1 RU panel (black anodized panel included) 2 color silk screen on 2 RU panel (black anodized panel included) Custom graphics require customer supplied art work (1:1 ratio preferred). One time screen charge may apply. led Series illuminated logo panels The best illuminated graphics panels available. Your artwork is transformed into a brilliant full color 1 or 2 RU rack panel that transforms any equipment rack into a high tech marketing piece with your company brand. Cool, long lasting LED lighting ensures years of fail-proof service. Compact and lightweight, the LED Series logo panel comes complete with 12V power supply for quick and easy installation. Part # Description LED1RUOP Custom 1RU LED illuminated panel with custom overlay, 12vdc power supply included LED2RUOP Custom 2RU LED illuminated panel with custom overlay, 12vdc power supply included LED1RUOP Custom 1RU LED illuminated panel with custom overlay LED2RUOP Custom 2RU LED illuminated panel with custom overlay Rlp Series Multi Function power supply/logo panels RLP615 Multi Function WORK LIGHT/power supply/logo panel • 15 amp six outlet power supply • Custom illuminated front panel • Requires only 1 RU of space • Front panel reset switch • Power on/off switch • Dimmer controlled LED rack lamp (separate from power) RLP615 Multi function work light/power supply/logo panel (rear) RLP615NL Multi Function power supply/logo panel • 15 amp six outlet power supply • Requires only 1 RU of space • Front panel reset switch • Power on/off switch RLP615 Multi function work light/power supply/logo panel Part # Description RLP615 1 RU, ( 1.75" ) Rack mount, six outlet power strip with LED lamp and illuminated logo RLP615NL 1 RU, ( 1.75" ) Rack mount, six outlet power strip w/ logo (no lamp) RLP615NL Multi Function power supply/logo panel (no lamp) Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 11 RACK PANELS AND ACCESSORIES BP Series Flat Aluminum Blank Filler Panels Flat aluminum blank filler panels for 19” EIA equipment cabinet • 1/8” (11 gauge) aluminum • Flat panels • Attractive durable black anodized finish Part # BP-1 BP-2 BP-3 BP-4 BP-5 BP-6 BP-7 BP-8 Description 1 RU, (1.75") Black anodized aluminum blank panel, flat 2 RU, (3.5") Black anodized aluminum blank panel, flat 3 RU, (5.25") Black anodized aluminum blank panel, flat 4 RU, (7") Black anodized aluminum blank panel, flat 5 RU, (8.75") Black anodized aluminum blank panel, flat 6 RU, (10.5") Black anodized aluminum blank panel, flat 7 RU, (12.25") Black anodized aluminum blank panel, flat 8 RU, (14") Black anodized aluminum blank panel, flat BF Series Flanged Aluminum Blank Filler Panels Aluminum flanged blank filler panels. • 1/16” (16 gauge) aluminum • Panels flanged at top and bottom for extra strength • Attractive black anodized finish • Offered in sizes 1 RU to 8 RU Part # BF-1 BF-2 BF-3 BF-4 BF-5 BF-6 BF-7 BF-8 Description 1 RU, (1.75") Black anodized aluminum blank panel, flanged top & bottom 2 RU, (3.5") Black anodized aluminum blank panel, flanged top & bottom 3 RU, (5.25") Black anodized aluminum blank panel, flanged top & bottom 4 RU, ( 7") Black anodized aluminum blank panel, flanged top & bottom 5 RU, (8.75") Black anodized aluminum blank panel, flanged top & bottom 6 RU, (10.5") Black anodized aluminum blank panel, flanged top & bottom 7 RU, (12.25") Black anodized aluminum blank panel, flanged top & bottom 8 RU, ( 14") Black anodized aluminum blank panel, flanged top & bottom CSBF Series contractor Grade Flanged Steel Blank Filler Panels Steel flanged blank filler panels • Flanged, top and bottom for extra strength • 20 gauge CRS • Durable powder coat black texture finish • Offered in sizes 1 RU to 6 RU Part # Description CSBF-1 1 RU, (1.75") Black Textured powder coated CRS blank panel, flanged top & bottom CSBF-2 2 RU, ( 3.5") Black Textured powder coated CRS blank panel, flanged top & bottom VP Series Flanged Aluminum Vent Panels Light weight aluminum vent filler panels • Light weight 16 gauge perforated aluminum • Panels flanged on both top and bottom for extra strength • Attractive black anodized finish • Offered in sizes 1 RU to 4 RU Part # VP-1 VP-2 VP-3 VP-4 Description 1 RU, (1.75”) Anodized aluminum vent panel, flanged top & bottom 2 RU, ( 3.5” ) Anodized aluminum vent panel, flanged top & bottom 3 RU, (5.25”) Anodized aluminum vent panel, flanged top & bottom 4 RU, ( 7”) Anodized aluminum vent panel, flanged top & bottom CSVP series contractor GRADE Flanged Steel Vent Panels Steel vent filler panels • 20 gauge CRS, perforated • Panels flanged top and bottom for extra strength • Durable powder coat black texture finish • Offered in sizes 1 RU to 4 RU Part # CSVP-1 CSVP-2 CSVP-3 CSVP-4 Description 1 RU, ( 1.75") Powder coated CRS vent panel, flanged top & bottom 2 RU, ( 3.5") Powder coated CRS vent panel, flanged top & bottom 3 RU, ( 5.25") Powder coated CRS vent panel, flanged top & bottom 4 RU, ( 7" ) Powder coated CRS vent panel, flanged top & bottom SC sERIES Smoked Polycarbonate Rack Mount Security Panels SC cover panels are fabricated from high impact, polycarbonate material fixed to durable black anodize aluminum mounting brackets, and are designed to protect equipment with control devices. • Available in 1 RU to 4 RU sizes • Branding / silk screening available • Rugged construction • Made in the USA 12 Part # SC-1 SC-2 SC-3 SC-4 Description 1 RU, ( 1.75") Smoked polycarbonate security cover 13/16" deep 2 RU, ( 3.5" ) Smoked polycarbonate security cover 13/16" deep 3 RU, ( 5.25") Smoked polycarbonate security cover 13/16" deep 4 RU, ( 7" ) Smoked polycarbonate security cover 13/16" deep RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available RACK PANELS AND ACCESSORIES SD series SD-S and SD-P Steel Rack Mount Security Panels SD-S security cover panels are completely fabricated from formed 20 gauge CRS and have no window. • Solid front panel, no window • Formed 20 gauge CRS, 1 1/4” deep • Black textured powder coat finish • Offered in 1 RU to 4 RU sizes • Silk screening available • Rugged construction • Made in the USA Part # SD-S-1 SD-S-2 SD-S-3 SD-S-4 Description 1 RU, ( 1.75”) Powder Coat Black Textured, formed CRS security cover 2 RU, ( 3.5” ) Powder Coat Black Textured, formed CRS security cover 3 RU, (5.25”) Powder Coat Black Textured, formed CRS security cover 4 RU, ( 7” ) Powder Coat Black Textured, formed CRS security cover SD-P security cover panels are fabricated from high impact, polycarbonate material fixed to durable black anodize aluminum mounting brackets, and are designed to protect equipment with control devices. • Available in 1 RU to 4 RU sizes • Branding / silk screening available • Rugged construction • Made in the USA Part # SD-P-1 SD-P-2 SD-P-3 SD-P-4 Description 1 RU, ( 1.75") Smoked polycarbonate insert security cover 2 RU, ( 3.5") Smoked polycarbonate insert security cover 3 RU, ( 5.25") Smoked polycarbonate insert security cover 4 RU, ( 7" ) Smoked polycarbonate insert security cover RS Series Rack Mount Shelves • Rack mountable equipment shelves • Available in 2 RU and 3 RU sizes • 16 gauge (.062) aluminum one piece assembly • Front and rear lip for increased strength and safety • Finished in black textured powder coat Part # Description RS2 2 RU, ( 3.5" ) Rack mount shelf RS3 3 RU, (5.25") Rack mount shelf RS2 HP Series Rack Mount Hinged Panels Part # Allows convenient access to rack mounted equipment. HH • Hinge orientation may be vertical or horizontal XH • Available in multiple rack sizes VH XV • Solid 1/8” (11 gauge) aluminum TS-1 • Attractive black or clear anodized finish • Available standard rack screws or with thumb screws on swing side • Customize with your choice of connectors, engraving or silk screening Description 2 RU, Horizontal hinged panel, one RU useable area 1 RU additional rack space for HH (above) 2 RU, Vertical hinged panel 1 RU additional rack space for VH (above) Thumb screw style mounting fasteners (2 each). Optional, for use with swing side of hinged panels RP Series Strain Relief and Lacing Panels RP45 Strain Relief Panel Provides efficient strain relief to large cable connectors such as triax and mass. May be used facing forward or inverted to provide recessed mounting. Punched and engraved to your specifications. • Solid aluminum construction • Welded seams • Powder Coat Finish • Order Blank, punched or with connectors Part # Description RP45 2 RU 45 Degree Strain Relief Panel, 11 gauge aluminum, powder coat black textured Order blank, or punched and engraved with connectors. RP45 Strain Relief Panels RPL Lacing Panel Allows for efficient cable management by utilizing a fixed 3" bottom flange punched to accept wire ties. • Solid aluminum construction • Flanged 1/2” upper, 3” lower • Provides strain relief and cable management Part # RPL-1 RPL-2 RPL-3 Description 1 RU Lacing Panel,18 gauge aluminum, powder coat black textured 2 RU Lacing Panel,18 gauge aluminum, powder coat black textured 3 RU Lacing Panel,18 gauge aluminum, powder coat black textured RPL-1 Lacing Panel Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 13 RACK PANELS AND ACCESSORIES RE Series Rack Mount Ears Part # RE-1 RE-2 RE-3 RE-4 RE-5 RE-6 RE-FP • Rack mount ears for any type of professional or consumer equipment • Available in 1 RU through 6 RU sizes • 11 gauge aluminum one piece assembly • Sold in pairs • Finished in anodized black • Optional RE-FP filler panel for undersized equipment Description 1 RU, ( 1.75") Black anodized aluminum rack ears (pair) 2 RU, ( 3.5" ) Black anodized aluminum rack ears (pair) 3 RU, ( 5.25") Black anodized aluminum rack ears (pair) 4 RU, ( 7" ) Black anodized aluminum rack ears (pair) 5 RU, ( 8.75") Black anodized aluminum rack ears (pair) 6 RU, ( 10.5") Black anodized aluminum rack ears (pair) 11 gauge anodized aluminum filler panel for undersized equipment CH Series Equipment Enclosure Chassis • Heavy gauge gold alodyne aluminum • Available in 1 RU through 6 RU sizes • Removable top and bottom covers • Custom front panel sold separately • Blank rear panel DEPTH SELECTION: When ordering, replace suffix “xx” with chassis depth (5”, 7” or 9”) Part # CH1-xx CH2-xx CH3-xx CH4-xx CH5-xx CH6-xx Description 1 RU, Chassis, 1.5" high, 17.5" wide, blank rear panel 2 RU, Chassis, 3.25" high, 17.5" wide, blank rear panel 3 RU, Chassis, 5" high, 17.5" wide, blank rear panel 4 RU, Chassis, 6.75" high, 17.5" wide, blank rear panel 5 RU, Chassis, 8.5" high, 17.5" wide, blank rear panel 6 RU, Chassis, 10.5" high, 17.5" wide, blank rear panel Rack Mounting Hardware We stock all the necessary screws, washers and tools to give your installation a consistent high quality finish. Let RCI Custom supply your rack hardware needs. Part # RS-100 RW-100 RSH-50 RSB RST Description Rack screws, 10/32"x 3/4", black, 100 piece pack Washers, nylon, 100 piece pack Security screws,10/32"x 3/4", black, hex nut w/ post, 50 piece pack Security screw bit Security screw tool VOLUME CONTROLS VCCS Series Contractor GRADE 70V Volume Controls on Stainless Steel Wall Plates Designed for commercial installations that demand a rugged, high quality volume control. Brushed stainless steel wall plate and attractive phenolic knob complete the package. Wiring made easy with labled Phoenix style screw terminals. Conductor capacity is up to 14 gauge. • Offered in 25W, 50W, 100W and 200W • UL Listed under Standard UL813 and UL2043 • .40 gauge stainless steel, one and two gang plates • Silk screened dial scale • Matching mounting hardware included • 3 db per step, 33db total attenuation • Convenient phoenix-style plug-in screw terminal strip • Packed individually, easy to stock and store Part # VCCS103-25 VCCS103-50 VCCS103-100 VCCS103-200 VCCS203-25 VCCS203-50 VCCS203-100 VCCS203-200 VCCS206-25 VCCS206-50 VCCS206-100 VCCS206-200 Description 1 gang, 25W, 70V attenuator, silkscreened dial, phenolic knob 1 gang, 50W, 70V attenuator, silkscreened dial, phenolic knob 1 gang, 100W, 70V attenuator, silkscreened dial, phenolic knob 1 gang, 200W, 70V attenuator, silkscreened dial, phenolic knob 2 gang, 25W, 70V attenuator, silkscreened dial, phenolic knob 2 gang, 50W, 70V attenuator, silkscreened dial, phenolic knob 2 gang, 100W, 70V attenuator, silkscreened dial, phenolic knob 2 gang, 200W, 70V attenuator, silkscreened dial, phenolic knob 2 gang, 25W, 70V attenuator, silkscreened dial, phenolic knob, and 5 pos. rotary switch 2 gang, 50W, 70V attenuator, silkscreened dial, phenolic knob, and 5 pos. rotary switch 2 gang, 100W, 70V attenuator, silkscreened dial, phenolic knob, and 5 pos. rotary switch 2 gang, 200W, 70V attenuator, silkscreened dial, phenolic knob, and 5 pos. rotary switch VCCS103-xx 1 gang, stainless steel wall plate, -xx W, 70V attenuator, silkscreened dial, phenolic knob VCCS203-xx 2 gang, stainless steel wall plate, -xx W, 70V attenuator, silkscreened dial, phenolic knob VCCS206-xx 2 gang, stainless steel wall plate, -xx W, 70V attenuator, silkscreened dial, phenolic knob, and 5 pos. rotary switch -xx: Specify 25W, 50W, 100W, 200W VCAL SERIES 70V Volume Controls on Aluminum Wall Plates VCAL volume controls are the choice when a project demands an attractive solution yet a rugged, high quality volume control. The 1/8” aluminum wall plate is offered in several different anodized and painted finishes. An attractive Rogan pure touch knob completes the package. Wiring made easy with labled Phoenix style screw terminals. Conductor capacity is up to 14 gauge. • Offered in 25W, 50W, 100W, 200W • UL Listed under Standard UL813 and UL2043 • T6-6061, 11 gauge aluminum wall plates with beveled edges • Silk screened dial scale • Offered in 7 different wall plate finishes • 2 1/4” deep, fits standard E.O. boxes • Matching mounting hardware included • 3 db per step, 33db total attenuation • Convenient phoenix-style plug-in screw terminal strip • 10 position and “off” VCAL103-xx 1 gang, aluminum wall plate, w/ 70V, -xx watt volume control 14 VCAL203-xx 2 gang, aluminum wall plate, w/ 70V, -xx watt volume control VCAL204-xx 2 gang, aluminum wall plate, w/ 70V, -xx watt volume control & 1- 1/4” T.R.S. VCAL206-xx 2 gang, aluminum wall plate, w/ 70V, -xx watt volume control & 4 pos. rotary switch -xx W Specify 25W, 50W, 100W, 200W (VCAL103xx specify 25W or 50W only) RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available VOLUME CONTROLS VCLT Series 70V Volume Control on Plated Steel Wall Plates Attractive, rugged, high quality volume control. The .40 extruded steel wall plate is offered in several different plated finishes. Screened dial scale and attractive Rogan pure touch knob completes the package. Wiring made easy with labled Phoenix style screw terminals. Conductor capacity is up to 14 gauge. • Offered in 25W, 50W, 100W, 200W • UL Listed under Standard UL813 and UL2043 • Plated steel wall plates • Matching mounting hardware included • 3 db per step, 33db total attenuation • Convenient phoenix-style plug-in screw terminal strip • Silk screened dial scale SS SB PB MC BZ Part # VCLT103-25xx VCLT103-50xx VCLT203-25xx VCLT203-50xx VCLT203-100xx VCLT203-200xx VCLT204-25xx VCLT204-50xx VCLT204-100xx VCLT206-25xx VCLT206-50xx VCLT206-100xx AZ SZ Description 1 gang, w/ 70V, 25 watt volume control, engraved 1 gang, w/ 70V, 50 watt volume control, engraved 2 gang, w/ 70V, 25 watt volume control 2 gang, w/ 70V, 50 watt volume control 2 gang, w/ 70V, 100 watt volume control 2 gang, w/ 70V, 200 watt volume control 2 gang, w/ 70V, 25 watt volume control & 1- 1/4” T.R.S. 2 gang, w/ 70V, 50 watt volume control & 1- 1/4” T.R.S. 2 gang, w/ 70V, 100 watt volume control & 1- 1/4” T.R.S. 2 gang, w/ 70V, 25 watt volume control & 1- 4 pos. rotary switch 2 gang, w/ 70V, 50 watt volume control & 1- 4 pos. rotary switch 2 gang, w/ 70V, 100 watt volume control & 1- 4 pos. rotary switch VCLT203-xx VCLT103-xx FINISH SELECTION: When ordering, replace suffix “xx” with LT plate finish desired. Custom sizes, configurations, and colors always available. (See page 10.) VCMI Series 70V Volume Controls on Aluminum Modular inserts Rugged and durable MI Series 1/8” aluminum inserts with choice of volume control. Units fit standard Decora® style and RCI modular wall plates. Attractive Rogan pure touch knob completes the package. Wiring made easy with labled Phoenix style screw terminals. Conductor capacity is up to 14 gauge. • Offered in 25W, 50W, 100W, and 200W • UL Listed under Standard UL813 and UL2043 • Modular inserts, milled aluminum for maximum strength • Matching mounting hardware included • 3 db per step, 33db total attenuation • Pre-wire using the convenient phoenix-style plug-in screw terminal strip Part # VCMI103-25xx VCMI103-50xx VCMI103-100xx VCMI103-200xx Description Modular Insert Decora® style, w/ 70V, 25 watt attenuator, w/ knob Modular Insert Decora® style, w/ 70V, 50 watt attenuator, w/ knob Modular Insert Decora® style, w/ 70V, 100 watt attenuator, w/ knob Modular Insert Decora® style, w/ 70V, 200 watt attenuator, w/ knob FINISH SELECTION: When ordering, replace suffix “xx” with “BK” (Anodized Black), “CL” (Anodized Clear), “PW” (Powder Coat White), “PI” (Powder Coat Ivory), or “PBKTX” (Powder Coat Black Textured). Custom configurations and colors always available. (See page 2.) VCBF Rack Mount Volume Control Panels Panels are made from 16 gauge (.062) aluminum, with a return flange on the top and bottom. Standard finish is anodized black. 19” EIA standard size. Either one or two RU tall. 1RU version supports one to six volume controls, the 2 RU version supports from six to twelve assemblies. When ordered, each volume control location will have a silk screened dial scale for each device. Volume control assemblies must be ordered separately. • 1/8” (11 gauge) aluminum • Panels have flange on top and bottom for strength • Units accept 25, 50, 100 and 200 watt attenuators • Silk screened dial scale • Attractive black anodized finish • Offered in 1 RU and 2 RU sizes • Panels mount from one to twelve volume controls Part # VCBF2-1 VCBF2-2 VCBF2-3 VCBF2-4 VCBF2-5 VCBF2-6 VCBF3-6 VCBF3-7 VCBF3-8 VCBF3-9 VCBF3-10 VCBF3-11 VCBF3-12 Description 2 RU, (3.5”) punched and silk screened for one volume control 2 RU, (3.5”) punched and silk screened for two volume controls 2 RU, (3.5”) punched and silk screened for three volume controls 2 RU, (3.5”) punched and silk screened for four volume controls 2 RU, (3.5”) punched and silk screened for five volume controls 2 RU, (3.5”) punched and silk screened for six volume controls 3 RU, (5.25”) punched and silk screened for six volume controls 3 RU, (5.25”) punched and silk screened for seven volume controls 3 RU, (5.25”) punched and silk screened for eight volume controls 3 RU, (5.25”) punched and silk screened for nine volume controls 3 RU, (5.25”) punched and silk screened for ten volume controls 3 RU, (5.25”) punched and silk screened for eleven volume controls 3 RU, (5.25”) punched and silk screened for twelve volume controls VCBF2-5 VCBF3-7 VC Series Panel & Rack Mount Volume Controls For use with the VCBF Series pre-punched rack panels. An attractive knob (not supplied) completes the package. (Order knob separately, see below.) All units fit on pre-punched rack panels or in a standard depth E.O. box. Phoenix-style plug-in screw terminal strip. • Offered in 25W, 50W, 100W and 200W • UL Listed under Standard UL813 and UL2043 • Use for rack mount applications, or mount on most wall plates • 2 1/4” deep, fits standard E.O. boxes • 3 db per step, 33db total attenuation • Pre-wire using the convenient phoenix-style plug-in screw terminal strip Part # VC-25 VC-50 VC-50-8S VC-100 VC-100-K VC-200 ALCPKES-70BA-1/4 ROGPT6-P-S-BL Description 25 Watt, 70 Volt, 3 db per step attenuator 50 Watt, 70 Volt, 3 db per step attenuator 50 Watt, 8 ohm, 3 db per step stereo volume control 100 Watt, 70 Volt, 3 db per step attenuator 100 Watt, 70 Volt keyed switch 3 db per step attenuator 200 Watt, 70 Volt, 3 db per step attenuator Alco 7/8" knob Rogan knob, pure touch w/ skirt, black, .250'' shaft, 1.25'' diameter Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 15 PROFESSIONAL PRODUCTS PRESS MULTS RCI Press Mults have fast become a “must have” item for the electronic news gathering and media industry. Press Mults eliminate the need for multiple microphones at the point of source, and provide an effective and efficient way to distribute clean audio and/or video signal to multiple recipients, reducing or eliminating interference from ancillary connected devices. Used where ever Press Conferences are held to distribute audio and/or video to the press corps, Press Mults are now commonplace with Political Campaigns, Government Events, Hotels, Court Rooms, Sporting Arenas, and with Audio/Video Rental companies that support broadcast and media events. BM-24 Passive Media Mult Box Our most popular Press Mult. Suitable for standard general use. The BM-24 is a passive 1 input / 24+8 output portable audio only Press Mult. A single balanced line level audio source drives 24-isolated XLR and 8-1/8” unbalanced mini audio outputs. • Line Level Audio Input (Balanced) • 24 Isolated XLR Outputs • 8 - 1/8” Mini Isolated Outputs • VU Level Meter • 85 dB Isolation • Link Output to Additional BM-24’s • Passive Electronics • Rugged ABS Case Construction • Compact, Weighs Only 5 Lbs. • Made in the USA BM-24 Also Available BM-24SM – Surface mount version for use on non-penetrable vertical surface, w back box BM-24FM – Flush mount unit, for recessed wall mounting. Supplied with back box. BM-24RM – Rack mountable version. Supplied with back box. BM-30T Passive Media Mult Box Our top rated passive Press Mult. The BM-30T is a 1 input / 30+10 output portable audio only Press Mult. A single balanced audio input drives 30 balanced XLR outputs, 8 unbalanced 1/8” mini jacks and 2 unbalanced 1/4” phone jacks. BM-30T • Line Level XLR Input • 30 Balanced XLR Outputs • 8 - 1/8” Mini Phone Outputs • 2 - 1/4” Phone Outputs • Jensen® Transformers throughout • Link Output to Additional Units • VU Level Meter • Passive Electronics • Extremely Rugged Aluminum Case • Optional molded case available • Compact Size (14 H x 18 W x 5 D Inches) • Made in the USA Also Available BM-30TSM – Surface mount version for use on non-penetrable vertical surface, w back box BM-30TFM – Flush mount unit, for recessed wall mounting. Supplied with back box. BM-30TRM – Rack mountable version. Supplied with back box. BM-30M Active Media Mult Box Recognized worldwide for High Profile Government use. The BM-30M is an active 1-input / 30+10+10 output active portable Press Mult. Unit is equipped with Auto Switching AC and rechargeable batteries. The BM-30M allows for a single mic or line level audio source to drive 30 transformer balanced audio outputs, 10 unbalanced mic outputs and 10 unbalanced line outputs, all highly isolated. • 30 Balanced XLR Outputs • 10 Unbalanced Mic Outputs (8 -1/8” and 2 -1/4”) • 10 Unbalanced Line Outputs (8 -1/8” and 2-1/4”) • Link Output for Additional Units • Headphone/Monitor Output • Active Electronics • VU Level Meter • Built-In Tone Oscillator • Professional Signal Levels • High Signal to Noise Ratio • Auto Switching AC/Battery, 120/240 • Compact Size (14 H x 18w x 5 D Inches) • Extremely Rugged Aluminum Case • Made in the USA BM-30M 16 RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available PROFESSIONAL PRODUCTS PRESS MULTS (continued) BM-16DB Active Media Mult Box Powerful, manageable and moderately priced. The BM-16DB is an active 1-input 16 +12 output portable Press Mult. A single balanced line level audio source feeds 16 transformer balanced mic/line switchable outputs. Of these, 12 are XLR only, while 4 provide for XLR, 1/4” phone, RCA or 1/8” mini output. Battery back up provided by 9V batteries. May link with other units via expansion output. • Mic/Line switchable input • 16 Balanced Mic/Line switchable XLR Outputs • 4 Unbalanced 1/4” phone outputs • 4 Unbalanced 1/8” mini outputs • 4 Unbalanced RCA outputs • Jensen® Transformers throughout • Link Output for Additional Units • Active Electronics • VU Level Meter • Professional Signal Levels • High Signal to Noise Ratio • Auto Switching AC/Battery, 9 Volt • Compact Size (14 H x 18 W x 5 D Inches) • Extremely Rugged Aluminum Case • Optional molded case available • Made in the USA Also Available: BM-16DBSM – Surface mount version for use on non-penetrable vertical surface, w back box BM-16DBFM – Flush mount unit, for recessed wall mounting. Supplied with back box & power supply BM-16DBAVRM – Rack mountable version. Supplied with back box & power supply BM-16DB BM-AV Passive Combination Audio/Video Press Mult Box The BM-AV is a portable combination Audio and Video Broadcast Media Mult Box. Single line level audio source feeds 12 XLR and 4 -1/8” mini phone audio outputs with balanced isolation and a single 1V p-p video input feeds 6 video outputs. • Line Level Audio Input • 12 Isolated XLR Outputs • 4 Isolated 1/8” Mini Phone Outputs • 85 dB Isolation (Audio) • Audio Link and Video Loop Output • 6 (1V p-p) Video Outputs • Powered by Two 9-Volt batteries • Battery Indicator Lights • Rugged ABS Case Construction • Compact - Weighs Only 6.5 lbs. • Made in the USA Also Available: BM-AVSM – Surface mount version for use on non-penetrable vertical surface, w back box BM-AVFM – Flush mount unit, for recessed wall mounting. Supplied with back box & power supply BM-AVRM – Rack mountable version. Supplied with back box & power supply CUSTOM Built press MULTS Don't See What You Like? Need It Larger or Smaller? Different Color? BM-AV RCI is happy to work with you to create the perfect package. From case choices to specialty mounting, our friendly and knowledgeable Customer Service team is here to help. Call 800-546-4724 to create your mult! Custom Sizes • Materials & Finishes • Configurations Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 17 PROFESSIONAL PRODUCTS Signal Processing MP-2 Passive 2 RU MP-2L Active 2 RU MP Series Monitor Panels Convenient signal monitoring of multiple signal sources at the head end equipment rack or other remote location. Available in both active and passive models. Each model allows monitoring of up to 10 distinct signal sources via high quality 3” speaker or discreetly through headphone lift jack. Optional VU Meter available at time of purchase. • Compact 2 RU chassis enclosed unit • High quality audio monitoring • 10 position input select switch • High quality 3” speaker • Volume control • Phoenix compression screw terminals for input connectivity • Headphone jack, front mounted • Active or passive versions available • Optional VU meter for visual monitoring Part # MP2 MP-2L Description Audio monitor panel, Passive Audio monitor panel, Active MPD Series - Media Presentation under table drawers MPD-1 Allows for inter connectivity between PC’s and various display devices from conference and boardroom tables without the need to penetrate or modify the tabletop. Designed as an easy to install gliding drawer, the MPD unit attaches quickly and easily with six mounting screws to the underside of almost any conference type table. Data and electrical connections are made with common “thru” type front and rear panel mount connectors. Available in single and dual user models. Front panel equipped with one HD15 connector, one RJ45, one RJ11, one 3.5mm mini stereo audio, and one AC outlet. Rear panel feed thru output. • Aluminum construction • Durable black powder coat finish • Steel ball bearing glides • Spring activated locking mechanism • Hinged AC covers • Pass thru connectivity • One and two user drawers • Standard computer interface connectivity • No table penetration or modification • Screw mounts under table for quick installation • UL Listed • Standard and custom configurations Select your choice of connectivity • Made in USA Part # Description MPD-1 Single User MPD-2 Dual User Front panel equipped with one HD15 connector, one RJ45, one RJ11, one 3.5mm mini stereo audio, and one AC outlet. Rear panel feed thru output. MPD-2 440 Pro Adapter Allows for the interface of semi-professional (consumer) audio equipment and professional audio devices. Well suited for studio, broadcast or live production applications. Converts low level (-20 to +3dB) and unbalanced signal output to professional level (+4dBM to +8dBM) balanced signal for use in commercial, live or broadcast systems. Connections include RCA input jacks to barrier strip outputs on the amplifier side. Attenuator side uses barrier strip inputs to RCA outputs. 440X Pro Adapter Provides RCA input jacks to male XLR outputs on the amplifier side and female XLR inputs to RCA outputs on the attenuator side. RM140 Rack Mount Kit Mount one or two 440’s (for controlling 4 audio signals) side by side in the half rack configuration using the optional RM-140 rack mount kit. • 20 to 20K Response (+ 4db) • Adjustable gain • Preset Attenuators • Internal power supply • Rack mountable using RM-140 kit • Low noise and distortion • +4 or +8dBm balanced outputs • Compact half rack size, 1RU tall • Made in USA Part # 440 Description 2 Channel level matching amplifier for matching professional and non-professional equipment levels. 440X 2 Channel level matching amplifier/attenuator with XLR connectors RM-140 Rack mount kit for 440. Mounts two 440 units side by side. SVGA 2-PORT SPLITTER/AMPLIFIER Signal booster and splitter that is used to take video input from a single source and direct it to two video outputs for monitors using analog signals. The signal boost obtained by using the RCIDS-200 allows you to not only split the signal but to extend the distance so that you can send the signal to about 210 feet. • One video input with two video outputs • High 250 MHz video bandwidth • Transmission distance up to 210 feet • Suitable for SVGA, VGA and Multi-sync monitors • Daisy-chain multiple units for more outputs • Matching mounting hardware included • Ideal for public broadcasting, classroom and training facilities and remote monitoring • Power supply included Part # Description DS-200 Portable Sound Systems PS 200 The PS200 Portable Sound System is ideal for schools, businesses, retail centers, indoor/ outdoor athletic events or anywhere a temporary and portable sound reinforcement system is needed. Complete with heavy duty rolling Baltic Birch cabinet with locking wheels, speakers, stands, multi input mixer, amp, 31 band GEQ, CD player/recorder, handheld wireless microphone with stand, and all necessary cables. • Totally self contained portable sound system • “Roll-around” system with locking front door • 8 input mixer with easy to use tone control • 275 watts per channel high quality amplifier • 1/3 octave, 31 band equalizer • CD player/recorder • Two 2-way speakers with 12” woofer and horn loaded high frequency driver • Wireless handheld microphone system • Convenient auxilliary input/output panel • Includes 50’ speaker cables • Speaker and Microphone stands included 18 SVGA 2-port multiplier Note: Specifications shown are minimum, actual equipment used may vary based on availability. RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available PARTNER PRODUCTS Bose® Support PRODUCTS Rack mount your Bose® CC-16 & CC64 Products: 4 RU black anodized rack mount panels provide for a variety of combinations. Part # BOS-1CC16 BOS-2CC16 BOS-3CC16 BOS-1CC64 BOS-1CC1664 Description One CC-16 Two CC-16 Threee CC-16 One CC-64 One CC-16 and one CC-64 BSS® Support PRODUCTS Aluminum replacement panels for BSS® BLU 8 and BLU 10 custom overlay plates. Available in assorted anodized and powder coat finishes with custom engraving. Part # Description BSSBLU8xx BLU 8 Custom Overlay Plate, includes custom engraving BSSBLU10xx BLU 10 Custom Overlay Plate, includes custom engraving FINISH SELECTION: When ordering, replace suffix “xx” with “BK” (Anodized Black), “CL” (Anodized Clear), “PW” (Powder Coat White), “PI” (Powder Coat Ivory), or “PBKTX” (Powder Coat Black Textured). (See page 2.) FSR® Support Products FL-500 Panels for all FSR® floor and wall boxes are in stock and available for custom design and assembly. Choose from parts and engraving options on PanelBuilder™. FSR® models include: Part # FL-500KIT FL-540KIT FL-600KIT FL-640KIT FL-700KIT FL-710KIT FL-1000KIT FL-1200KIT FL-1300KIT Part # FL-1500KIT FL-2000KIT WB-3GKIT WB-4GKIT WB-MRKIT WB-MRKIT WB-MSKIT WB-PRKIT WB-PSKIT Note: Panels sold in complete kits for each box ordered. Aluminum insert panels have a black anodized finish. Crestron® Support Products Replacement face plates are made larger than original product to help hide sloppy sheet rock. Available for many popular Crestron® control devices. Choose from aluminum or brass and our wide variety of finish options. Available on PanelBuilder™ or call factory for assistance. Units may be specified in sizes 1”, 2” or 3” larger than standard factory supplied plates. Crestron models include: Part # CNX-6-xx CNX-8-xx CNS-12-xx TPS-2000-xx TPS-3000-xx TPS-4L-xx TPS-6L-xx Other models available, contact factory FINISH SELECTION: When ordering, replace suffix “xx” with anodized finish “BK” (Black) or “CL” (Clear), “PW” (Powder Coat White) or “PI” (Powder Coat Ivory). (See page 2.) Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 19 ENCLOSURES - FLOOR FL-1200 FSR® Floor Enclosure (Wooden stage and computer floors) Steel box designed for wooden stage and computer floors. Provides a practical solution for power, audio and video cable termination and connection. Dual door design allows full access when making connections, yet only a small cable opening when in use. Cover is a welded one piece design complete with two knockouts, one on the rear and one on the bottom. Sturdy and easily installed box. Finished with Sandtex paint (black or oak). Box Size: Lid Size: Weight: Knock Outs: Insert Panels: 4 .625” x 3.625” x 4.5” 6” x 4.75” x .125” 2.75 lbs Two .50” or .75” One with 3” x 2 1/2” usable area. Design on PanelBuilder™, or call factory BLK OAK FL-1300 FSR® Floor Enclosure (Wooden stage and computer floors) Steel box designed for wood stage floors and computer floors. A standard 2-gang blank plate provides the perfect solution for audio, video, power or telecommunication connections. Dual door design allows full access when making connections, yet only a small cable opening when in use. Sturdy and easily installed box. Finished with Sandtex paint (black or oak). Box size: Lid Size: Weight: Knock Outs: Insert Panels: 5.125” x 7.125” x 4 .875” 8.5” X 6.125” X .125” 5 lbs. 2 on rear .50” or .75”, 1 on bottom .50” or .75”, Sides 1 each .50” or .75” One 2 gang. Design on PanelBuilder™, or call factory OAK BLK FL-1500 FSR® Floor Enclosure (Wooden stage and computer floors) Steel box designed especially for wooden stage and computer floors. Provides a practical solution for power, audio and video cable termination and connection. Dual door design allows full access when making connections, yet only a small cable opening when in use. Large interior panel may be custom designed to accommodate audio/datacom and power. Cover is a welded one-piece design complete with two knockouts, one on the rear and one on the bottom. Sturdy and easily installed box. Finished with Sandtex paint (black or oak). Box Size: Lid Size: Weight: Knock Outs: Insert Panels: FL-1500-2D: 11 .875”” x 8” x 6” 13.5” x 9.5” x .188” 13 lbs. 4 on rear 1” or 1.25”, 4 on bottom 1” or 1.25” One 6.18” x 8.84”. Design on PanelBuilder™, or call factory For use with 2 duplex AC BLK OAK FL-500P FSR® Floor Enclosure (Tile, Wood, and Carpet Over Poured Concrete) Designed for concrete floors that are covered with carpet, tile or wood. UL and CUL Listed, and passed for scrub water. Lift-off section of the cover allows full access to internal connector plates and stored cables. Smaller hinged cable access door flips back to create cable exit. Low profile edging is .25” or .50” , available in brass or aluminum. Interior provides two angled brackets for use with standard size plates — 1 single, 1 double and 1 four gang opening, all isolated for maximum safety. Available in the following depths: 2.25, 3, 4, 6, 8, 10”. Notes: This box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. Scrub water standard only applied to boxed installed in concrete, not raised access boxes. Gang configuration for the 4, 6, 8, 10” box is pictured. The 2.25 and 3” depths have special gang configurations. Provided with temporary construction cover. Boxes and covers are sold separately. Box Size: 10” x 12” x depth Lid Size: 10.5” x 12.5” x .125” Edging: .25” or .5” Brass or Aluminum Weight: 16 lbs. Knockouts: Twelve, either 1” or 1.25” Insert Plates: One 1 gang, one 2 gang, one 4 gang. May be designed on PanelBuilder™, or call factory. B BLK BLP OAK S SLP SSQ BSQ JL PLP FL-540P FSR® Floor Enclosure (Raised access, computer & stage floors) Designed for raised access floors. Lift off section of the cover allows full access to the internal cables and connector plates, smaller hinged trap door creates cable exit. Cables can be stored within the box when not in use. Sturdy drop-in floor lip supports the unit and installs flush with floor. Carpet edging (.25”) available in brass or aluminum. Provided with two angled brackets for cable connections. Openings for a single, double and a four gang plate. all isolated for maximum safety. Sturdy welded steel construction. Box bottoms are available in 4” and 6” depths. Provided with a temporary construction cover. Please view the finished cover choices below. Boxes and covers are sold separately. Box Size: 10" X 12" X Depth (choice of 4" or 6") Rim Size: 11.5" x 13.5" Cover Size: 10" X 12" Edging Height: .25" Brass or Aluminum SLP BLP SSQ BSQ BLK OAK Weight: Box: 19 lbs. (approx.) Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is Cover: 6 lbs. (approx.) unlikely to occur. Additionally this box is not applicable for contact with grade. Knockouts: Total of twelve, 1" or 1.25" Insert Plates: One 1 gang, one 2 gang, one 4 gang. May be designed on PanelBuilder™, or call factory. 20 RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available ENCLOSURES - FLOOR FL-600P FSR® Floor Enclosure (Tile, Wood and Carpet Over Poured Concrete) Designed for carpeted floors, tile and wood over concrete. UL and CUL Listed. Rated for scrub water Lift-off section of the cover allows full access to internal connector plates and stored cables. Smaller hinged cable access door flips back to create the cable exit. Low profile edging is .25” high and is available in brass or aluminum. Interior has two angled brackets allowing for standard size plates — 2 single, 1 triple, 1 six gang opening, all isolated for maximum safety. Designed to handle the rigors of a floor environment yet maintain flexibility and elegance. Box Size: Cover Size: Edging:. Weight: Knockouts: Insert Panels: 13.5” x 12” x depth 14” x 12.5” x .125” 25” Brass or Aluminum Box: 20.5 lbs. Cover: 10 lbs. Fourteen: either 1” or 1.25” Four: either .75” or .5” Two 1 gang, one 3 gang, one 6 gang. May be designed on PanelBuilder™, or call factory. Provided with temporary construction cover. Boxes and covers are sold separately. Note: This box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. Scrub water standard only applies to boxes installed in concrete. SLP BLP SSQ BSQ BLK OAK JL BSQ BLK PLP FL-640 FSR® Floor Enclosure (Raised Access, Computer & Stage Floor) Designed for raised access floors. Lift off section of the cover allows full access to the internal cables and connector plates. Smaller hinged trap door folds back to create the cable exit. Cables may be stored in the box when not in use. Sturdy drop-in floor lip supports unit and installs flush with floor. Carpet edging (.25”) available in brass or aluminum. Provided with two angled brackets with openings for two single, one triple, and one six gang plate, all isolated for maximum safety. Sturdy welded steel construction. Box Size: Rim Size: Cover Size: Edging: Weight: Knockouts: Insert Panels: 13.5” x 12” x depth 15.5” x 14” 14” x 12.5” x .125” .25” Brass or Aluminum Box: 20.5 lbs. Cover: 10 lbs. Fourteen: either 1” or 1.25”, Four: either .75” or .5” Two 1 gang, one 3 gang, one 6 gang. May be designed on PanelBuilder™, or call factory. Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. Provided with a temporary construction cover. Please view the finished cover choices. Boxes and covers are sold separately. SLP BLP SSQ OAK FL-700 FSR® Floor Enclosure (Tile, Wood and Carpet Over Poured Concrete) Designed for use on carpeted/tile floors over concrete where it may be necessary to pass cables thru the box without interfering with the various connectors. Pass thru route is front to back. Lift-off section of the cover allows full access to internal cables and connector plates. Smaller, hinged trapdoor creates cable exit. Cables may be stored in the box when not in use. Sturdy 11 gauge steel cover installed flush with the floor includes low profile ¼”edging, available in brass or aluminum. Interior provides one angled bracket cable connections with two single- and one triple- gang opening, all isolated for maximum safety. Note: This box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. Scrub water standard only applies to boxes installed in concrete. Box Size: Cover Size: Edging: Weight: Knockouts: Insert Panels: 8" x 14" x 5.25" 7" x 13.125" x .125" .25" Brass or Aluminium BLP SLP Box: 18 lbs. Cover: 5.5 lbs. Six, either .50" or .75" Eight, either 1" or 1.25" Two 1 gang, one 3 gang. May be designed on PanelBuilder™, or call factory. BSQ SSQ BLK OAK Provided with temporary construction cover. Boxes and covers are sold separately. FL-710 FSR® Floor Enclosure (Tile, Wood and Carpet Over Poured Concrete) Designed for carpeted, tiled or wood floors over concrete where it may be necessary to pass cables thru the box without interfering with the various connectors. Pass thru route is front to back. Lift-off section of the cover allows full access to internal cables and connector plates. Smaller, hinged trapdoor creates cable exit. Cables may stored within the box when not in use. Sturdy 11 gauge steel cover is installed flush with the floor includes low profile ¼”edging, available in brass or aluminum. Interior provides one angled bracket for one single- and one double- gang opening, which are all isolated for maximum safety. Box Size: Lid Size: Edging: Weight: Knockouts: Insert Panels: 8" x 9" x 51⁄8" 7.125" x 8.125" x .125" .250” Brass or Aluminium Box: 10.3 lbs. Cover: 3.1 lbs. BLP SLP Six, either .50” or .75”, Three, either 1” or 1.25” One 1 gang, one 2 gang. May be designed on PanelBuilder™, or call factory. BSQ SSQ BLK OAK Provided with temporary construction cover. Boxes and covers are sold separately. Note: This box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. Scrub water standard only applies to boxes installed in concrete FL-1000 FSR® Floor Enclosure (Wood or Thin Tile Over Poured Concrete) Designed for wood or thin tile floors over concrete. A practical solution for cable storage with easy access. The large hinged section of the cover folds back to allow full access to internal cables and connector plates. Smaller hinged trap door fastens back to create cable exit. Cables are stored in box when not in use. Sturdy 1/8” thick cover is available in solid brass (antique bronze finish), or steel (black painted finish). May be ordered in 2.5”, 3”, 4”, 5”, and 6” depths.. Extremely sturdy welded construction. Box Size: Lid Size: Edging: Weight: Knockouts: Insert Panels: 10” X 12” X 6” 10.5”X12.5”X1/8” .25 or .50 Brass or Aluminum 16 lbs. Total of eight, either 1” or 1.25” Varied depending on Depth. May be designed on PanelBuilder™, or call factory. BRASS (not pictured) BLK OAK Provided with temporary construction cover. Boxes and covers are sold separately. Note: This box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 21 ENCLOSURES - FLOOR FL-2000 fSR® Floor Enclosure (Tile, Wood, and Carpet Over Poured Concrete) Designed for thin tile or carpet over poured concrete floors. Dual door design allows full access to the interior of the box, and a small cable opening when in service. Provided with two standard insert plates with separate divided areas for power and audio/video. Audio/video section has a flat removable panel which can be custom punched . Cover is 1/8” steel with hinges. Notes: This box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. Provided with a temporary construction cover and leveling feet. Boxes and covers are sold separately. Box Size: Lid Size: Weight: Knockouts: Insert Panels: BRASS (not pictured) 12" x 10" x 6" BLK 12.5" x 10.5" x .125” 15 lbs. AC section one rear and one left side either .50” or .75”, A/V section three rear and one right side either 1” or 1.25” One 1 gang, One 6.18” x 8.84” . Design on PanelBuilder™, or call factory OAK FE Series floor EnclosureS (Raised Access, Computer & Stage Floors) Practical and simplistic connectivity boxes designed for use in conference rooms, auditoriums, courtrooms, churches and general meeting spaces of all kinds with raised floors. Each unit provides ample and easy access to standard 2 or 4 gang wall plates for audio, video, telecommunications and data connectivity. Optional rear shroud available when a fully enclosed product is desired. FE-200 Specifications Material : Top Door Panel: Door Opening: Cable Access Flap: Box: Weight: Finish: Cut Out Opening: Mounting Type: Optional Shroud: FE-200 US steel, 12 gauge top, 16 gauge box 5.187 x 6.812 inches Hinged, 4.688 x 5.812 inches Hinged, 5.187 x 1.875 inches 7.750 x 9.750 x 4.875 inches deep 6 lbs. Black Sandtex™® 6.375 x 8.375 inches 4 top mounted .25 diameter screw holes (screws not provided) RCI FE-200SR FE-400 US steel, 12 gauge top, 16 gauge box 8.74 x 6.812 inches Hinged, 8.240 x 5.812 inches Hinged, 8.74 x 1.875 inches 11.310 x 9.750 x 4.875 inches deep 10.5 lbs. Black Sandtex™® 9.940 x 8.375 inches 4 top mounted .25 diameter screw holes (screws not provided) Part # Description RCI FE-400SR FE-200 FE-400 2 Gang floor box 4 Gang floor box ENCLOSURES - WALL EB Series Electrical Box Covers Designed to enable mounting of gang sized wall plates and touch control panels into standard electrical boxes. Recessed frame and locking hinged door may be oriented in any direction. Standard and custom finish options. Part # EB-6xx EB-8xx EB-10xx EB-12xx EB-14xx EB-18xx EB-24xx • Rugged 16 gauge steel construction • Continuous piano hinged door • Cylinder lock with two keys • 1 1/8” useable depth inside cover • 1” trim flange to finish installation • Various sizes and powder coat finishes to meet project requirements Description 6"x6" hinged door assembly, push to release latch, keyed cam lock 8"x8" hinged door assembly, push to release latch, keyed cam lock 10"x10" hinged door assembly, push to release latch, keyed cam lock 12"x12" hinged door assembly, push to release latch, keyed cam lock 14"x14" hinged door assembly, push to release latch, keyed cam lock 18"x18" hinged door assembly, push to release latch, keyed cam lock 24"x24" hinged door assembly, push to release latch, keyed cam lock FINISH SELECTION: When ordering, replace suffix “xx” with “PG” (Powder Coat Electrical Grey), “PW” (Powder Coat White), or “PBKTX” (Powder Coat Black Textured). Custom sizes, configurations, and colors always available. (See page 2.) WB3G/4G FSR® FRONT ACCESS LOCKING WALL BOX COVERS The WB-3G-C and WB-4G-C wall box covers are designed to provide security for A/V connections in an attractive enclosure. The wall box covers are perfect for hotels, conference centers, churches, meeting rooms, airports and other public spaces where additional security is needed. • Sturdy steel construction • Mounts in either new or retrofit applications • Ships complete with mounting hardware • Available in 3 and 4 gang versions • Standard finish is white or prime • Built in lock and push-to-open retention latch • Finish unit using RCI MI Series inserts • Wall box cover can be mounted either vertically or horizontally • Cylinder lock and keys included Part # WB-3G-C WB-4G-C Description 3 Gang, Locking wall box cover (no plate) 4 Gang, Locking wall box cover (no plate) WB-R SERIES FSR® FRONT ACCESS RECESSED LOCKING WALL BOX COVERS The WB-R2G, WB-R3G and WB-R4G Recessed Wall Box Covers are designed to provide recessed mounting for A/V connections in an attractive enclosure. The wall box covers are perfect for hotels, conference centers, churches, meeting rooms, airports and other public spaces where recessed mounting is needed. • Sturdy steel construction • Mounts in either new or retrofit applications • Ships complete with mounting hardware • Available in 2, 3 and 4 gang versions • Finish unit using RCI MI Series inserts • Wall box cover can be mounted either vertically or horizontally • Standard finish is white or prime Part # WB-R2G WB-R3G WB-R4G Description 2 Gang, Recessed mounting box 3 Gang, Recessed mounting box 4 Gang, Recessed mounting box WB-MR SERIES FSR® FRONT ACCESS RECESSED LOCKING WALL BOX COVERS The WB-MR2G, WB-MR3G and WB-MR4G Recessed Wall Box Covers are designed to provide recessed mounting for A/V connections and extra in an attractive enclosure. • Sturdy steel construction • Mounts in either new or retrofit applications • Ships complete with mounting hardware • Available in 2, 3 and 4 gang versions • Cylinder lock with keys included • Finish unit using RCI MI Series inserts 22 • Wall box cover can be mounted either vertically or horizontally • Standard finish is white or prime • Recessed mounting with and without window • Standard finish is white or prime Part # WB-MR2G WB-MR3G WB-MR4G Description 2 Gang, Recessed mounting box, w/ metal cover 3 Gang, Recessed mounting box, w/ metal cover 4 Gang, Recessed mounting box, w/ metal cover RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available ENCLOSURES - WALL WB-PR SERIES FSR® FRONT ACCESS RECESSED LOCKING WALL BOX COVERS (w/ Windowed Locking Cover) The WB-PR2G, WBPR3G and WB-PR4G Recessed Wall Box Covers are designed to provide recessed mounting for A/V connections and extra in an attractive enclosure. • Sturdy steel construction • Mounts in either new or retrofit applications • Ships complete with mounting hardware • Available in 2, 3 and 4 gang versions • Cylinder lock with keys included • Finish unit using RCI MI Series inserts • Wall box cover can be mounted either vertically or horizontally • Standard finish is white or prime • Recessed mounting with and without window • Standard finish is white or prime Part # WB-PR2G WB-PR3G WB-PR4G Description 2 Gang, Recessed mounting box, w/ metal cover & window 3 Gang, Recessed mounting box, w/ metal cover & window 4 Gang, Recessed mounting box, w/ metal cover & window WB-MS SERIES FSR® SURFACE LOCKING WALL BOX COVERS Designed to provide surface mounting for A/V connections and extra in an attractive enclosure. • Sturdy steel construction • Mounts in either new or retrofit applications • Ships complete with mounting hardware • Available in 2, 3 and 4 gang versions • Cylinder lock with keys included • Finish unit using RCI MI Series inserts • Wall box cover can be mounted either vertically or horizontally • Standard finish is white or prime • Surface mounting with and without window Part # WB-MS1G WB-MS2G WB-MS3G WB-MS4G WB-MS5G Description 1 Gang, Locking Wall Box Cover 2 Gang, Locking Wall Box Cover 3 Gang, Locking Wall Box Cover 4 Gang, Locking Wall Box Cover 5 Gang, Locking Wall Box Cover WB-PS SERIES FSR® SURFACE LOCKING WALL BOX COVERS Designed to provide surface mounting for A/V connections and extra in an attractive enclosure. • Sturdy steel construction • Mounts in either new or retrofit applications • Ships complete with mounting hardware • Available in 2, 3 and 4 gang versions • Cylinder lock with keys included • Finish unit using RCI MI Series inserts • Wall box cover can be mounted either vertically or horizontally • Standard finish is white or prime • Surface mounting with and without window Part # WB-PS2G WB-PS3G WB-PS4G WB-PS5G Description 2 Gang, Locking Wall Box w/ Window 3 Gang, Locking Wall Box w/ Window 4 Gang, Locking Wall Box w/ Window 5 Gang, Locking Wall Box w/ Window ENCLOSURES - TABLETOP SE Series Sloped Table Top EnclosureS Designed to accept standard wall plates. The units can be ordered in one through three gang sizes. The 16 gauge aluminum material is finished in black textured powder coat. Rubber feet are included to protect table surfaces and cable access with strain relief is also provided. SE-200 • Black textured aluminum • Available in 1 - 3 gang sizes • Cable access with strain relief • Press nuts to mount standard 1, 2 or 3 gang wall plates • Rubber feet to protect table tops P/N SE100BKTX SE200BKTX SE300BKTX Description 1 gang, black textured powder coated aluminum sloped enclosure 2 gang, black textured powder coated aluminum sloped enclosure 3 gang, black textured powder coated aluminum sloped enclosure SE-100 SE-CUSTOM (Brass cutout, designed for Crestron® TPS1000) SE-300 (With custom AL 3g wall plate) SE-CUSTOM (Customer design) PTB SERIES FSR® Pop Up Table Box Designed to provide an elegant solution for table top connectivity. Available in 2, 3 and 4 gang sizes, the PTB Series handle data, power, and A/V connections in a pneumatically powered “pop-up” design. • Pop-up design • 5” high in the open position • Black or brass cover and bezel • Available in 2, 3 and 4 gang versions • Duplex AC outlet on each side • Adjusts to table thickness in 1/4” increments • Finish unit using RCI MI Series inserts • Mechanical latch • Pneumatic gas spring mechanism • UL rated Part # PTB-2-BLK PTB-2-BRS PTB-3-BLK PTB-3-BRS PTB-4-BLK PTB-4-BRS PTB-PS Description 2 Gang, Pop Up Table Box, w/ AC, Black 2 Gang, Pop Up Table Box, w/ AC, Brass 3 Gang, Pop Up Table Box, w/ AC, Black 3 Gang, Pop Up Table Box, w/ AC, Brass 4 Gang, Pop Up Table Box, w/ AC, Black 4 Gang, Pop Up Table Box, w/ AC, Brass Power Supply for PTB (factory installed, must be ordered w/ Table Box) T3-MJ FSR® Table Top Mic Input Jack An elegant way to mount a gooseneck microphone or plug a standard microphone cable into a tabletop or lectern. Available in black. Other finishes are available upon request. • Simple installation (requires 2” diameter hole) • Requires a 2” diameter hole • Black drop down cover • Mounts gooseneck microphone or microphone cable Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 23 CUSTOM ELECTRONICS AND WIRING Multi Pair audio, speaker cable, video, coax and data... RCI Custom Products can provide you with professionally made cable for nearly any application. Cable can be ordered to your exact specifications with regard to length and connectivity. Custom wiring applications, harnesses, and circuitry available by contacting our Engineering Department. Multi pair cable with mass connector and strain relief Custom switchbox wired with snake Triax cable (custom length) STAGE BOXES, MULTI-PAIR CABLES, AND WIRING SB-2436 SB Series Custom Stage Boxes SB Series Stage Boxes are offered in three convenient sizes. The boxes can be configured with virtually any array of in and out connectors. Select the multi pair cable type and “fanout” end of cable or just select the box and connectors. Custom permanent engraving completes the units. Custom sizes are available on request. Part # SB-609 SB-1220 SB-2436 Description Stage box, 6-9 connector capability Stage box, 12-24 connector capability Stage box, 24-36 connector capability • Available in three standard sizes • Stage boxes have blank face plate • Rugged 1/8” (11 gauge) aluminum • Black textured powder coat finish • Engraveable face plate • Order with or without cable end • Configure with the “in” and “out” connectors as needed • Choice of multi pair cables and multi pin connector types • Heavy duty construction handles the rigors of portable use • Durable Handle BC Series Stage Box Connectors Choose from premium panel mount connectors. All connectors are installed using screws, star washers, and nuts (no pop rivets) for serviceability. Includes up to 5 letters engraving. Part # BC-M BC-F BC-P Description Panel mount, male XLR connector (includes punch, terminate and engraving) Panel mount, female XLR connector (includes punch, terminate and engraving) Panel mount, one/4" phone connector (includes punch, terminate and engraving) FO Series Fan Out TAILS Choose from premium cable end connectors. Each fan out connector is completed with color coding, shrink wrap and engraved ID ring. • Offered in three standard connector types • Each connector is color coded and shrink wrapped • Connectors include an engraved ID ring • Other connector configurations are available Part # FO-M FO-F FO-P Description Terminated Male XLR, color coded, w/ shrink & engraved I.D. ring Terminated Female XLR, color coded, w/ shrink & engraved I.D. ring Terminated 1/4" phone, color coded, w/ shrink MC Series Multi-pair Cable MC Series multi-pair cable is offered in several convenient sizes. MC Series cables are 24 gauge premium stranded copper with individual drain wire, jacketed, and rugged, pliable black matte flame retardant polyvinyl outer jacket. Part # MC-6 MC-9 MC-12 MC-16 Description 6 Pair Multi Cable, 24 awg. individual jacket and shield (per foot) 9 Pair Multi Cable, 24 awg. individual jacket and shield (per foot) 12 Pair Multi Cable, 24 awg. individual jacket and shield (per foot) 16 Pair Multi Cable, 24 awg. individual jacket and shield (per foot) Part # MC-20 MC-32 MC-36 MC-58 Description 20 Pair Multi Cable, 24 awg. individual jacket and shield (per foot) 32 Pair Multi Cable, 24 awg. individual jacket and shield (per foot) 36 Pair Multi Cable, 24 awg. individual jacket and shield (per foot) 58 Pair Multi Cable, 24 awg. individual jacket and shield (per foot) SR Series Strain Relief Hanger Type Box End Type 24 Protect your cable investment with professional high quality strain relief. Choose hanger type for FO Series fan out and box end type for BC Series stage box connectors. Part # SR-1H SR-2H SR-3H SR-4H Description Hanger type strain relief for 6-12 pair cable Hanger type strain relief for 16 pair cable Hanger type strain relief for 20-36 pair cable Hanger type strain relief for 58 pair cable Part # SR-1B SR-2B SR-3B SR-4B Description Box end type strain relief for 6-12 pair cable Box end type strain relief for 16 pair cable Box end type strain relief for 20-36 pair cable Box end type strain relief for 58 pair cable RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available CA SERIES CABLE ASSEMBLIES HIGH Quality audio and video cables Offered in different configurations and in different lengths, using high quality connectors and cable to optimize your installation. Perfect for Audio, Video, and Data applications. Part # CA502 CA500 CA559 CA560 CA601 CA570 CA580 CA100M2M CA100M2F Description RCA assembly ivory RGB video w/ audio pair RCA assembly ivory RGB video BNC to BNC, RG59 cable assembly RCA to RCA, RG59 cable assembly Toslink cable HDMI cable 1 meter gold HDMI high performance cable SVGA male/male w/ferrite SVGA male/female w/ferrite CA502 RGB/ Component w/Audio Part # CA101M2M CA200M2M CA202M2M CA205M2M CA300M2M CA300M2F CA400M2M TTL15FBF-04 TTLFBM-03 Description SVGA m/m w/3.5mm stereo audio Stereo audio Stereo audio/video S-video male dual RCA males 3.5mm stereo male / male cable 3.5mm stereo male / female cable M/M S video cable SVGA to BNC female tails SVGA to BNCmale tails CA202M2M L/R Stereo Audio + Video Patch Cables RCA/RCA CA580 & CA570 HDMI Cables CA200 L/R Stereo Audio Patch Cables, RCA/RCA CA101M2M SVGA Male w/ 3.5mm Stereo CA100M2F SVGA Male/Female CA100M2M SVGA Male to Male CA205M2M L/R Stereo Audio + S-Video Patch Cables CA601 Toslink Cables Fiber Optic CA560 Composite Video Cables CA559 Composite Video Cables CA500 RGB • Most common connectors, gold or nickel plated • Variety of pre-made lengths for different applications • Double or ferrite shields for the best possible isolation TTL15FBF-04 & TTL15FBM-03 SVGA to BNC Tails CA400M2M S-Video Cables CA300M2M & CA300M2F 3.5mm Stereo Audio Patch Cables BULK CONNECTORS CABLE MOUNT AUDIO XLR NEUNC*FX *3 – 7 pole female, nickel housing, silver contacts. Also available: NC*FX-B, black housing, gold contacts NC3FXX-EMC 3 pole female EMC-XLR, nickel housing. Also available: NC3FXX-EMC, black housing NC*MX *3 – 7 pole male, nickel housing, silver contacts. Also available: NC*MX-B, black housing, gold contacts NC3MXX-EMC 3 pole male EMC-XLR, nickel housing. Also available: NC3MXX-EMC-B, black housing NC*FXX *3 – 7 pole, female, nickel housing, silver contacts. Also available: NC*FXX-B, black housing, gold contacts NC*FRX *3 – 7 pole, female, right angle, nickel housing, silver contacts. Also available: NC*FRX-B, black housing, gold contacts XLR (cont’d.) SWIA*F *3 – 7 pole, female, nickel housing, silver pins SWIA*M *3 – 7 pole, male, nickel housing, silver pins 3.5MM 1/4” SPEAKON MULTIPIN (cont’d.) NC*MRX *3 – 7 pole, male, right angle, nickel housing, silver contacts. Also available: NC*MRX-B, black housing, gold contacts RCA NEUNC3FM-C 3 pole unisex XLR. Also avail.: NC3FM-C-B, black RCICA-30-484 TRS nickel housing NC*MXX *3 – 7 pole, male, nickel housing, silver contacts. Also available: NC*MXX-B, black housing, gold contacts 3 pole TRS nickel housing. Also available: SWI280, 2 pole TS NEUNL4FC SWITA*F *3 – 4 pin female tini Q-G (mini XLR) SWITA*M *3 – 4 pin male tini Q-G (mini XLR) SWI3502 Nickel housing. Also avail.: SWI3502A, large housing RCICA-30-292 RCICA-30-287-* RCA 75 ohm gold plated w/ black chrome barrel, .16” cable opening. *Color rings available: *black, blue, green, red, white, yellow MULTIPIN 4 pole loudspeaker connector. Also available: NEUNL2FC, 2 pole; NEUNL8FC, 8 pole POWER NEUNL4MM 4 pole coupler WHL3IRP 122 pin (40 pair), mass connecWHL2IF tor, crimp. Also avail.: WHL4IRP, 61 pin (20 pair), female, 176/58 pair; WHL5IRP, 48/16 solder. Also avail.: WHpair; WHL6IRP, 84/28 pair L1IF, 39/12 pair VIDEO TRIAX WHL2IM NEUNACEFCA NEUNAC3FCB 61 pin (20 pair), male, solder. Also avail.: WHL1IM, PowerCon, 20 amp, A type PowerCon, 20 amp, B type for power in for power out 39/12 pair ADCATCJ-A12 VGA Triax female for .475” cable. Also available: ADCATCJ-B38, .360” cable; ADCATCJ-C12, .520” cable ADCATCP-A12 Triax male for .475” cable. Also avail.: ADCATCP-B328, .360” cable; ADCATCP-C12, .520” cable DON’T SEE WHAT YOU NEED? Please contact the factory! RCICA-30-556 HD15 male w/metal head, accepts cable up to .433” Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 25 BULK CONNECTORS Chassis MOUNT Don’t See It? Our courteous Customer Service team is ready to help find or source new or specialty connectors. 800-546-4724 AUDIO XLR NEUNC3FP-1 3 pole female receptacle w/ Neutrik “P” series mounting, solder contacts, nickel housing, silver contacts. Also avail.: NEUNC3FP-B-1, black w/gold contacts SWID*F *3 – 7 pole female receptacle, solder contacts, nickel housing, silver pins. Also available: SWID*FD, non locking NEUNC3MP-B 3 pole male receptacle w/Neutrik “P” series mounting, solder contacts, black housing, gold contacts. Also avail.: NEUNC3MP, nickel w/silver contacts NEUNC*MD-L-1 SWID*M *3 – 7 pole male receptacle, solder contacts, nickel housing, silver pins SWIC*F *3 – 7 pole male receptacle, universal D-size, solder contacts, nickel housing, silver contacts. Also avail.:NEUNC*MD-L-B-1, black /gold contacts or NC*MDL-BAG-1, black w/silver contacts *3 – 7 pole female receptacle, circular mount, nickel finish, silver pins 3.5mm RCICH-30-295-HEX 3.5mm stereo mini jack feedthru SWIC*M *3 – 7 pole male receptacle, circular mount, nickel finish, silver pins RCA RCICH-30-493A 3.5mm stereo mini jack to solder RCICH-30-491T 3.5mm stereo mini jack to screw term BTXCA-MX35 3.5mm stereo mini jack to screw term ORACJS3 3.5mm stereo mini jack to solder RCA (cont’d.) SWI3501FP RCA to solder NEUNC*FD-L-1 *3 - 7 pole female receptacle, universal D-size, solder contacts, nickel housing, silver contacts. Also avail.: NEUNC*FD-L-B-1, black w/gold contacts or NC*FDL-BAG-1, black w/silver contacts RCICH-30-410-3/8-* RCA F/F feedthru *Available colors: black, green, red, white, yellow MOU161-10* RCA to solder *Available colors: red, white, yellow RCICH-75-521-50 RCA to BNC feedthru SPEAKON CANRJ-RU-* Recessed RCA to solder. *Available colors: red, white, yellow, blue, green CANRJ-R-* RCA to solder *Available colors: red, white, yellow NEUNF2D-B-* SPEAKON (cont’d.) NEUNL4MPR 4 pole receptacle, round G-size, black housing, silver 3/16” flat tab Recessed RCA, universal D-size, solder contacts, black housing. *Avail. colors: black, red, yellow, green, blue. Also avail.: NEUNF2D-*, nickel housing 4 pole receptacle, universal DNEUNL4MP-ST size, black housing, silver 3/16” 4 pole receptacle, universal flat tab. Also avail.: NL2MP, D-size, black housing, 2 pole screw term NEUNL4MP 1/4” NEUNL8MPR 1/4” (cont’d.) MULTIPIN NEUNCJ6FI-S 3 pole XLR – 1/4” hybrid solder WHL1CF 39 pin (12 pair), female, solder type. Also avail.: WHL2CF, 61/20 pair 8 pole receptacle, square G-size, nickel flange, silver 3/16” flat tab. Also avail.: NEUNL8MPR-BAG, black flange SWI11 TS solder SWI12B TRS solder SWI14B TRS solder w/normals VIDEO S-Video WHL1CM 39 pin (12 pair), male, solder type. Also avail.: WHL2CM, 61/20 pair WHLCRP3 122 pin (40 pair), crimp Also avail.:WHL4CRP, 176/58 pair; WHL5CRP, 48/16 pair; WHL6CRP, 84/28 pair RCICH-DT12-CM 37 pin male, solder type. Also avail.: RCICH-DT12CF, 37 pin female, solder type NEUNJ3FP6C 3 pole locking, solder, universal D-size, nickel housing, silver contacts. Also avail.: NEUNJ3FP6C-BAG, black housing, silver contacts (RCA - See AUDIO RCA) RCICH-35-498G-BH S-video feedthru RCICH-TPX3213-24-0400 S-video to 6” wire tail BTXTCS415-PST S-video to screw term RCICH-VGAF-T HD15 female to screw term RCICH-30-587 HD15 F/F feedthru VIDEO (Cont’d.) S-Video (cont’d.) BTXTCS415P S-video feedthru VGA RCICH55-742F-P S-video to 2 female BNC tail VGA (cont’d.) RCICH-30-588 HD15 M/M feed through 26 ORADB15HDF HD15 female solder DISPLAY PORT BTXCD-9532HDMF HD5 M/F feed through RCICH-35-729 Display port F/F feedthru ORADB15HDM HD15 male solder RCITTL15FBF-04 HD15 female to 5 BNC female RCITTL15BM-03 HD15 female to 5 BNC male BNC CANBCJ-RU Recessed BNC to solder isolated CANBCJ-JR BNC feedthru CANBCJ-JRU Recessed BNC feedthru isolated NEUNBB75DFIB Recessed BNC, feedthru, isolated, D-size, black housing. Also avail.: NEUNBB75DFI, nickel housing RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available BULK CONNECTORS chassis MOUNT (cont.) VIDEO (Cont’d.) DATA HDMI MODULAR RJ-11/RJ-12/RJ45 CAT 3 DVI LCMHDMIFF HDMI F/F feedthru RCICH-45-241B HDMI F/F feedthru w/LED BTXCD-HDMIFFP HDMI F/F feedthru LCMDMB605FF DVI F/F feedthru LCMECF504B4S CAT5E RJ-11 F/F feedthru. Also avail.: LCMECF504B-6S, RJ-12 F/F feedthru and LCMECF504B8SK, SUPUMJ06U01 RJ-45 F/F feedthru RJ-11 to 110 punch down SUPUMJV8B01 RJ-45 Cat5e to 110 punch down DATA (Cont’d.) MODULAR CAT5E (cont’d.) CAT6 USB Ethercon Cat5e to 110 punch down, D-size nickel flange. Also SUPUMJA601 avail.: NEUNE8FDV-Y110-B, RJ-45 Cat6 to 110 punchNEUNE8FDV-Y110 black flange down w/white bezel RCICH-72-305E RJ-45 Cat5e F/F feedthru USB (cont’d.) LCMUJ110C6* RJ-45 Cat6 to 110 punch down. *Colors avail.: black, blue, orange white, orange, red, white, yellow FIREWIRE USB A to B feedthru black. Also avail.: LCMECF504-UAAS, USB LCMECF504B-UAB A to A shielded, silver D-SUB (cont’d.) MOUDE9P NEUNE8FDY-C6 Ethercon Cat6 to IDC termination, D-size, nickel flange. Also avail.: NEUNE8FDY-C6-B, black flange NEUNAUSB-W-B USB A to B or B to A feedthru, Dsize, black housing. Also avail.: NEUNAUSB-W, nickel housing NEUNA1394-6-W D-SUB Firewire feedthru, D-size, nickel housing. Also avail.: NEUNA1394-6-W-B, black housing (VGA - See VIDEO VGA) 9 pin D-sub male to solder. Also avail.: MOUDA15P, 15 pin; MOUDB25P, 25 pin; MOUDC37P, 37 pin RCICH-30-580 LCMECF504-94MS 9 pin D-sub M/M feedthru Firewire feedthru, shielded, Also avail.: RCICH-30silver 584M, 15 pin D-sub M/M DIN/MINI DIN MOUDE9S 9 pin D-sub female to solder. Also avail.: MOUDA15S, 15 pin; MOUDB25S, 25 pin; MOUDC37S, 37 pin LEV16242E AC Decora 15 amp black. Also avail.: LEV16242W 15 amp white; LEV16342W 20 amp white; LEV16342E 20 amp black RCICH-30-584F 15 pin D-sub F/F feedthru. Also avail.: RCICH-30-577, 25 pin D-sub F/F; RCICH-30-582, 9 pin RCICH-35-498G-BH-6 D-sub F/F 6 pin mini DIN F/F feedthru RCICH-30-508 5 pin DIN 45 deg POWER AC OUTLETS LEV5320WCP AC Duplex 15 amp white. Also avail.: LEV5320ICP, 15 amp ivory; HBL5252BK 15 amp black, LEVCR20E, 20 AMP black; LEV5362-IG, 20 amp isolated ground (orange) LOW VOLTAGE SWI722A .08” center diameter power connector FIBER OPTIC SC SWI41 1/8” TS connector NEUNC3MPA A type power in connector (blue). Also avail.: NEUNC3MPB, A type power out connector (gray) SWIEAC309 EAC power in ST LC LCMFOA-005A SC/SC duplex fiber NEUNO2-4FDW MOU161-0709 15 amp power outlet LC duplex w/4 solder contacts. Also avail.: NEUNO2-4FDW-1, w/shell ground contact for SMTE cable shield LCMFOA-550A LC Duplex LCMFOA-570 LC/LC quad AMP501381-1 ST multimode SWITCHES, POTENTIOMETERS, ETC. RF F UHF JERF81C F/F feedthru BTXE7351 UHF F/F feedthru SWITCHES (Cont’d.) IDEAL6Q-A24-* Maintained push button 24V LED lamp. *Colors avail.: green, red, white. Also avail.: IDEAL6Q-M24-*, momentary; IDEAB6Q-M2-B, momentary black (no LED lamp) SWITCHES Keyswitch SPDT (key stays in C&K7101J51ZQE22 when clockwise). Also avail.: Rocker switch SPDT C&K2011UC203NQ, DPDT (key Also available: C&K101132C203NQ removes in both positions) C&K7201J51ZQE22, DPDT BTXE7350 UHF female to solder ATTENUATORS LOW10836 70V/25V 25W attenuator. Also avail.: LOW10837, 50W; LOW10838, 100W; LOW13256, 200W; LOWKL100S, keyswitch 100W POTENTIOMETERS LOWLV-50S-RM 50 ohm, 5W pot MOU31VA401 10K linear taper pot. Also avail.: MOU31VJ401, 10K audio taper Momentary SPDT push button. Also avail.: C&K8121J852GEZZ, C&K8121J81ZGE22 DPDT KNOBS ROGPT6-P-S-BLK 1.25 knob ALCPKES70BA-1/4 7/8” knob. Also avail.: ALCPKES60BA, 1/4 3/4” knob; ALCPKES90BA, 1/4 1” knob DON’T SEE WHAT YOU NEED? Please contact the factory! Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 27 Custom Metal solutions Count on RCI Custom for all your custom metal and electronic needs RCI Custom has the experience and expertise to help you with the design and fabrication of most any type of metal product. Custom enclosures, rack accessories, and mounting devices are our business. • Design Services • Precision Metal Fab • Custom Plating • Powder Coat • Welding • Engraving • Graphics Services • Assembly Services Fire Alarm Box Custom Plasma/P.C. Mounts, JFK International Airport Custom Plexiglass Security Door Custom Crestron® Table Mount Unit Custom Table Riser Locking Wall Enclosure MBP-5000 DVIGear® Under Table Mounting Solution 28 Signage and Dash Panel RCI CUSTOM PRODUCTS • www.rcicustom.com / 800-546-4724 • Custom Design Options Always Available TERMS AND CONDITIONS CONFIDENTIAL All Orders Placed with RCI Custom Products Will Be Subject to the Following Terms and Conditions • Minimum Order The Minimum Value of any order or release must total $50.00 or more. • First Time Orders All first time orders must be paid in advance by check or credit card. No orders will ship until all checks have cleared. Any balance and/or shipping and handling charges may be paid in advance or collected C.O.D. • Custom Product All Custom orders require a 50% deposit at the time of order. Balance remaining plus shipping and handling charges may be paid in advance via credit card or collected C.O.D. at the time of delivery. • Non Custom Product All standard or non-custom product orders may be paid in advance by credit card or may ship C.O.D. for the price of the product plus shipping and handling. • Credit Terms A Dealer Application for credit may be obtained online at www. rcicustom.com. Credit limits will be determined by RCI, and all accounts will be due Net 30 days from date of invoice. • Late Fees All past due accounts will be subject to a service charge of 1.5% of the unpaid balance per month. SHIPPING AND DELIVERY • Shipping All orders will be shipped F.O.B. Frederick MD. Default method of shipment for all orders shipping to the U.S. will be UPS standard ground service. RCI will ship UPS 3 day, 2 day, next day or via Federal Express upon written request. Crated shipments will ship best way, either truck or air transit. Shipments outside of the U.S. will ship DHL or other carrier as directed by customer. • Shipping Dates Estimated delivery dates and shipping commitments will always be made in good faith. Every attempt will be made to adhere to these commitments; however, estimated shipping dates imply no guarantee of actual delivery time. RCI shall not be held responsible for any consequential or other damages resulting from any delays in shipping or delivery. • Damaged Merchandise All claims for product damaged during transit must be made directly with the carrier. Any claim for loss or damage, whether visible or concealed, must be made within 7 days of receipt of merchandise. NOTE: Concealed damage must be reported to both the carrier and RCI within 48 hours. RCI CUSTOM LIMITED WARRANTY • Custom Products All RCI custom plates, panels, wiring and accessories are warranted for a period of one year from the date of purchase against defects in materials or workmanship. In the event of such defects, RCI will repair or replace the product promptly at our option. Damage from abuse, mishandling, improper installation, atmospheric abnormalities, water immersion, lightning or power surges, or damage sustained during shipping is not covered under this warranty. RCI CUSTOM LIMITED WARRANTY (cont.) All products must be returned to RCI for warranty claim, and must be shipped freight pre-paid. If RCI deems the product defective, we will first try to repair the product. If we cannot repair it or if the repair cost exceeds the value of the product, RCI will replace it with an equal or greater value model as determined by RCI. If the product is outside the warranty period and is not repairable, RCI will return the product as is. Any item repaired or replaced under warranty will carry a 90 day limited warranty, or the remainder of the original warranty, whichever is longer. RCI assumes no liability for installation, reinstallation, or costs associated with the installation or reinstallation of any RCI product. RCI liability shall be limited strictly to the repair or replacement of any product after its return to RCI, which shall be at the sole discretion of RCI. Liability will be further limited to the cost of the original purchase price. RCI shall be held harmless from any liquidated, real, or consequential damages resulting from the installation of any RCI product. Parts selection or approval shall be the sole responsibility of the customer. Order’s for custom products without specification of part numbers constitutes approval of any and all RCI part selections. Parts selected improperly will be exchanged, if possible, with the correct parts plus any cost differential and any subsequent shipping and handling charges. If RCI is requested to remove and replace exchanged parts, additional labor and shipping charges may apply. Plates and panels manufactured and sold without parts will be warranted only when punch specifications are provided by the customer. Any parts or equipment provided by RCI, and made a part of any RCI custom product, shall be covered by that manufacturer’s warranty only. • Non Custom Products All RCI Standard and Professional Series Products are warranted for a period of one year against defects in parts and workmanship. If RCI deems the product defective, we will first try to repair the product. If we cannot repair it or if the repair cost exceeds the value of the product, RCI will replace it with an equal or greater value model as determined by RCI. If the product is outside the warranty period and is not repairable, RCI will return the product to the Dealer as is. Damage from abuse, improper installation, or owner attempted repair voids all warranties. All products must be returned to RCI for warranty claim. • Electrical Components Light bulbs and lamps, including Electro Luminescent lamps and lighted switches, provided with or without custom product, carry no warranty. Switches, volume controls and other electrical components damaged by misuse, installation or other causes are not covered by warranty. All products must be returned to RCI for warranty claim. • Returning Product All returns for warranty repair or exchange must be shipped freight pre-paid, and an RCI issued Manufacturer’s Return Authorization (MRA) number must accompany all returns. Any return shipment delivered without an MRA will be refused and returned to shipper at their expense. Returns should be shipped via a carrier with tracking service, or delivered in person. RCI will not be responsible for packages lost in transit. RCI will pay all shipping charges to return product back to Dealers. Warranty repaired or replacement product will be return shipped via the same carrier and method as delivered to RCI at RCI expense. Returns permitted for reasons other than warranty repair or exchange are subject to a minimum-restocking fee of 35%. Custom products are not returnable, except for warranty repair or replacement. Custom Design Options Always Available • www.rcicustom.com / 800-546-4724 • RCI CUSTOM PRODUCTS 29 2011 PRODUCT OFFERING RCI Custom Products 801 North East Street, Suite 2A, Frederick, MD 21701 301-620-9130 / 800-546-4724 • 301-620-9103 / 800-546-6175 FAX http://www.rcicustom.com • [email protected] 0411