Transcript
Network Test Catalog 1.0 Dec 2015 Page
EAST COAST D
A
T
A
C
O
M
,
I
N
C
.
WAN DELAY EMULATORS AND IP PACKET GENERATORS
PRODUCTS FOR GLOBAL NETWORKS East Coast Datacom, Inc.(ECD) is a customer‐oriented, high technology enterprise which was formed in 1994 to design, manufacture and support Communication Equip‐ ment. ECD manufactures the broadest line of Network Delay Emulation Test Equip‐ ment on the market. Our products are utilized worldwide by fortune 500 companies and government agencies. In 2011 ECD completed and has obtained an active GSA Con‐ tract for direct purchase by government agencies. NEW PRODUCT AVAILABLE : EDS‐BGP, BGP Network Delay Simulator The EDS‐BGP is a BGP Network Delay Simulator allowing users to test and stage critical network equipment adding delays and impairments over 10/100/1000 BGP based Ethernet. The unit is an excellent choice for validating and evaluating new products and technologies. The EDS‐BGP allows the user to accurately emulate bandwidth, la‐ tency, loss and congestion over a simulated BGP Link. http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 2
Table of Contents Capabilities …………………………………….Page 3 WAN Delay Emulators..…………..………..Pages 4‐9 IP Traffic Generators..…………..………...Page 10 Custom Design Solutions ………………..Page 11‐13 Product Comparison Chart ………………..Page 14
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 3
OUR CAPABILITIES East Coast Datacom, Inc.(ECD) is committed to our customers needs for a quality product. We design to all common commercial design standards. We utilize the latest development tools including OrCAD, Allegro, AutoCAD and a custom written database management sys‐ tem documentation control and inventory management. All designs are to IPC standards and manufactured using ISO 9001/2008 standards.
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 4
NETWORK DELAY SIMULATORS
Border Gateway Protocol(BGP) WAN Delay Simulator The Border Gateway Protocol or BGP is at the core of the mod‐ ern Internet. Large corporate and government enterprise net‐ works are increasing their use of BGP to interconnect different 8 Ports in Copper/Fiber administrative and country specific regions. This geographic span adds further to the complexity of a BGP network when cal‐ Supports BGP Routing Dy‐ culating and planning for network latency. Network design en‐ namically, Embedded BGP gineers need a reliable and cost effective means to test the Router routers’ ability to handle BGP transactions accurately while simulating network latency with their applications. Precise Delay Emulation The BGP‐EDS Ethernet delay simulator is a product used to ap‐ Creates History Log Files ply traffic rules on packets flowing out of the egress port for the intended packets matching source address and destination ad‐ dress. Dynamic Routing protocols like BGP are used for the Multi‐User Support route and can be applied to Interior Gateway network as well as an Exterior Gateway Network. Easy to use GUI 10/100/1000 MGMT Port The user can specify the source and destination IP addresses either as a single IP or with the subnet mask (CIDR Addresses) for which the traffic rules apply as a whole. The BGP‐EDS sys‐ 0 to 8 Seconds of Delay tem acts as a BGP router by which it chooses the best and valid destination using a best path selection algorithm. Dynamic rout‐ Constant, Uniform and ing allows the router to take individual routing decisions for a Roaming Delay, Packet network before routing . Loss, Re‐Ordering
Interface: 10/100/1000
ORDERING INFORMATION / TECHNICAL HOT LINK Part Number: 232000 Model: BGP‐EDS, 8‐Ports
PDF Data Sheet Location http://www.ecdata.com/images/pdfs/BGP‐EDS.pdf
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 5
PDS‐1G supports 10/100/1000 ‐ Small & Portable The PDS‐1G is the smallest Portable Delay Simulator on the market allowing users to test/stage critical network equipment by altering bandwidth, latency, packet loss and congestion over 2 or 4 Ports available 10/100/1000 Ethernet. The PDS‐1G can emulate up to two in‐ dividual links simultaneously at rates up to 2 GbE, making it Supports UDP, TCP, MPLS, ideal for multiple test configurations. The PDS‐1G is a must VLAN, ESP, LPD, Encrypted have test tool for product development / demonstrations, net‐ Packets work validation, VoIP, benchmark testing, video / IPTV simula‐ tion and website performance. Precise Delay Emulation The PDS‐1G hardware based architecture is powerful and is Creates Log Files coupled with custom software presenting an easy to use GUI interface. The PDS‐1G operates from a web browser and the No Software to Load user has no cumbersome software or confusing licenses to deal with for secure operation. Easy to use GUI The PDS‐1G can act as a bridge or a router in the users network. 10/100/1000 MGMT Port The user configures the unit via the GUI interface using a stan‐ dard web browser. The GUI is fast and simple to use. All com‐ 0 to 8 Seconds of Delay mands and settings are displayed prominently. Simply set the band width, delay and any traffic congestion if required. The Constant, Uniform and user is presented with the results in real time and in a graph. Roaming Delay, Packet Loss, Re‐Ordering
Interface: 10/100/1000
ORDERING INFORMATION / TECHNICAL HOT LINK Part Number: 234000 Model: PDS‐1G, 2‐Ports
PDF Data Sheet Location http://www.ecdata.com/netem/PDS‐1G.pdf
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 6
New GUI
EDS‐10G supports line rates for 1G, 10G and 40G The EDS‐10G is an Ethernet Delay Simulator allowing users to test/stage critical network equipment by altering bandwidth, 10GbE and 40Gbe latency, packet loss, congestion and other important link im‐ pairments over 10/100/1000, 10GbE and 40Gbe Ethernet. 2, 4 or 6‐Ports depending on the interface The EDS‐10G utilizes the latest hardware and software design allowing Line Rate Performance. The unit is a must have test Copper or Fiber Interfaces tool for product development / demonstrations, network vali‐ dation, VoIP benchmark testing, video / IPTV simulation and Supports UDP, TCP, MPLS, transaction performance. The hardware based architecture is VLAN, ESP, LPD, Encrypted coupled with custom software presenting an easy to use inter‐ face. The unit operates from a command line interface or web Packets browser. The user has no cumbersome software or confusing licenses to deal with for secure operation. Precise Delay Emulation The EDS‐10G can act as a bridge or a router in the users net‐ Supports Filtering work. The user configures the unit via a standard web browser. No Software to Load All commands and settings are displayed prominently. Simply set the band width, delay and any traffic congestion or loss if SCRIPT Support required. The unit also supports a filtering method of IP Packets and scripting support for automated testing. The user is pre‐ 10/100/1000 MGMT Ports sented with the results in real time and in a graph.
Line Rates 10/100/1000,
0 to 10 Seconds of Delay
ORDERING INFORMATION / TECHNICAL HOT LINK Part Number: 229000 Model: EDS‐10G
PDF Data Sheet Location http://www.ecdata.com/10gbEemulator/10gbewansimulator.pdf
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 7
EDS‐1G supports 10/100/1000 ‐ MPLS Support ! The EDS‐1G is an Ethernet Delay Simulator allowing users to test/stage critical network equipment by altering bandwidth, latency, packet loss, congestion and other important link im‐ 4 Ports, 2 Separate Paths pairments over 10/100/1000 Ethernet. The EDS‐1G can emu‐ late two individual links simultaneously at rates up to 2 GbE, Supports UDP, TCP, MPLS, making it ideal for multiple test configurations. The EDS‐1G is a VLAN, ESP, LPD, Encrypted must have test tool for product development / demonstrations, Packets network validation, VoIP, benchmark testing, video / IPTV simulation and website performance. Precise Delay Emulation The EDS‐1G hardware based architecture is powerful and is Creates Log Files coupled with custom software presenting an easy to use GUI interface. The EDS‐1G operates from a web browser and the No Software to Load user has no cumbersome software or confusing licenses to deal with for secure operation. Easy to use GUI The EDS‐1G can act as a bridge or a router in the users network. Two 10/100 MGMT Ports The user configures the unit via the GUI interface using a stan‐ dard web browser. The GUI is fast and simple to use. All com‐ 0 to 8 Seconds of Delay mands and settings are displayed prominently. Simply set the band width, delay and any traffic congestion if required. The Constant, Uniform and user is presented with the results in real time and in a graph. Roaming Delay, Packet Loss, Re‐Ordering
Interface: 10/100/1000
ORDERING INFORMATION / TECHNICAL HOT LINK Part Number: 207000 Model: EDS‐1G
PDF Data Sheet Location http://www.ecdata.com/PDFs/lan‐latency‐emulator.pdf
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 8
RDS‐PLUS supports Serial Data & Telco *NEW LVDS* The RDS‐PLUS is the best Serial Data and TELCO delay simula‐ tor on the market with an exceptional price. It is a true industry work horse utilized by all government and contracting agencies. 1.2k to 51.85Mbps Rates The Router Delay Simulator Plus (RDS+) allows users to test Precise Delay Emulation and stage critical equipment for reliable network operation while simulating network delays. The RDS+ provides a realistic No Software to Load simulation of physical network behavior with respect to time delays and bit errors. It supports user rates of 1.2k up to Easy to use GUI or Serial 52Mbps while providing delays from zero to 8 round trip. Bi‐Directional Buffers By using the RDS+ in place of or in series with a real link (WAN) a wide variety of error conditions can be introduced under con‐ 0 to 4 Seconds of Delay trolled and testable conditions. Burst Error Insertion The RDS+ has two data port interfaces that support LVDS, RS‐ 232, RS‐422, RS‐530, V.35, X.21, DS1/E1, TTL, HSSI, DS3, E3, or 511 BERT Generator STS‐1. Status LED’s Each Port The RDS+ can introduce Random and/or Burst errors into the 3 Year Warranty & Support data stream. These two error types can be used independently or in a combined fashion. NEW EIA‐644 LVDS cards The RDS+ is configured via a standard RS‐232 serial port or an optional GUI 10/100 LAN module. The user has no software to load as all configuration data is within the RDS+.
Serial & Telco Interfaces
ORDERING INFORMATION / TECHNICAL HOT LINK Part Number: 175000 Model: RDS‐PLUS
PDF Data Sheet Location http://www.ecdata.com/PDFs/rds+.pdf
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 9
UDC‐RDS supports Low or High Speed Serial Data The UDC‐RDS allows users to test/stage critical low data rate testing of DCE or DTE equipment while simulating network de‐ lay times. The unit provides a realistic simulation of physical 300bps to 3.073Mbps Rates network behavior with respect to time delays and clock rates. The unit supports user data rates of 300bps up to 1.024Mbps Precise Delay Emulation while providing delays from zero to 1 second each path. By using the UDC‐RDS in place of or in series with a real data No Software to Load link (WAN) a wide variety of error conditions can be introduced under controlled and testable conditions. Easy to use Dip Switches The unit has two data port interfaces that support RS‐232, RS‐ Bi‐Directional Buffers 422/449, RS‐530, V.35, HSSI, LVDS and X.21. The data inter‐ faces can be mix and matched where applicable, such as a V.35‐ 0 to 1 Second of Delay to‐RS‐530 connection. The UDC‐RDS also allows the user to Standalone or Rackmount pass or force control signals. The control signals are also de‐ layed along with the user data. 90‐240VAC or DC Power The unit is configured via accessible front panel dip switches and is available in a stand‐alone or rack mount chassis. The user Status LED’s Each Port has no software to load as all configuration is within the UDC‐ 3 Year Warranty & Support RDS. The model is available in two models for internal clocking or external clocking.
Serial Interface Support
ORDERING INFORMATION / TECHNICAL HOT LINK
Part Number: Various Model: See web site
PDF Data Sheet Location http://www.ecdata.com/PDFs/UDC-RDS_low_speed.pdf http://www.ecdata.com/PDFs/UDC-RDS_low_speed.pdf
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 10
Stateful Traffic Generator®, STG‐10G
Supports 1GbE & 10GbE Rates 8‐Ports 10/100/1000 2‐Ports 10GbE , Up to 20GbE of Aggregate Traffic
IP Stateful Traffic Genera‐ tion with real time Reports
Emulation of Network Traf‐ fic to test device capabili‐ ties or QoS
Network Monitoring, Analy‐ sis and Performance Test
Reproduce traffic traces stored in PCAP files with Real Time Statistics
Line Rate results for Half the Cost of FPGA Systems
Embedded Easy to use GUI
The Stateful Traffic Generator® model STG‐10G is based on the well known traffic generation engine D‐ITG™. The STG‐10G is composed of a Graphical User Interface (GUI) that wraps the D‐ ITG™ engine, INTEL® DPDK Fast Packet Technology and other test tools. The STG‐10G is capable of producing IPv4 and IPv6 traffic by accurately replicating the workload of current Internet or typical user applications. The platform supports 8‐Ports 10/100/1000 and 2‐Ports of 10GbE traffic generation managed via the easy to use GUI. At the heart of the STG‐10G is a powerful software design opti‐ mized for IP Stateful Traffic Generation running on Linux. The software is integrated with the INTEL® Data Plane Development kit openly known as DPDK for fast packet processing. The DPDK kit allows Line Rate performance even for tiny 64byte packets. Supports UDP, TCP, ICMP, DCCP, SCTP and DNS, Telnet, VoIP (G.711.1, G.711.2, G.723.1, G.729.2, G.729.3)CSa, CSi and Quake3 The unit can operate in three different modes: ● single flow mode: a single traffic flow is generated ● multi flow mode: multiple flows are generated, even towards different STG‐10G instances; ● Packet Checker: a single traffic flow is generated & Received
ORDERING INFORMATION / TECHNICAL HOT LINK Part Number: 218000 Model: STG‐10G, 4‐Core, 8 Threads
PDF Product Presentation Location http://www.ecdata.com/PDFs/STG‐10G.pdf
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 11
SOFTWARE DESIGN SOLUTIONS Software Systems services include Boot code development Development of Board Support Packages and Device Drivers for various reference designs Firmware RTOS - VxWorks , pSOS, WinCE , Embedded Linux , QNX, Thread-X, Nucleus Logical and physical drivers supporting various layers of protocol stacks for embedded applications Feature enhancements for existing systems Design and interoperability testing, test automation for existing platforms Enhancement of BSP software for specific boards Customized API development for specific customer needs Development and Porting of Protocols stacks Development of Wired and Wireless Stacks Embedded Software Development Porting Protocol Stacks Windows (CE, 2K, NT) to Linux Linux to Window (CE, 2K, NT) Porting Codecs C Code porting onto specific DSP C Code porting onto specific DSP assembly code Optimized (DSP) C code to DSP assembly code Porting of Applications onto different operating systems Technology Expertise .Net platform C,C++,C# JAVA/J2EE Windows CE SQL and DataBase Management Application Domain Expertise Enterprise Software Tool Development Industrial Automation Media and entertainment Media Development (SDK) Product Management Software Front ends for Embedded platforms
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 12
CUSTOM DESIGN SOLUTIONS
FAST TURN DESIGNS AND MODIFICATIONS East Coast Datacom understands your need to keep budgetary costs down. But you need a custom design solution and you need it fast ! Changes to Existing Designs We can help you, just as we have with many of our customers. 6‐8 weeks for most designs
Custom Design Solutions
Little to No R&D Costs Up‐ front with production QTY’s
Create your own product Cost Reduce an Existing
Our motto is, “The Customer Creates the Product”
For over 21 years East Coast Datacom, Inc has been solving many unique data communication problems. Simply email us your product request and we will respond pack to you within 24 hours.
Product
Designed to International Standards
We will meet UL, CSA, CE, FCC, RoHS Standards
CONTACT INFORMATION / TECHNICAL HOT LINK http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
Page 13
Designed & Produced to IPC Standards
ISO 9001/2008 & Lead Free RoHS Compliant
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
EAST COAST D
A
T
A
C
O
M
,
I
N
C
. Page 14
WAN DELAY EMULATORS ——— IP PACKET GENERATORS PRODUCT COMPARISON CHART Main Features EDS‐10G EDS‐1G PDS‐1G BGP‐EDS RDS‐PLUS UDC‐RDS Latency Set Per Port 0 ‐ 10 sec 0 ‐ 8 sec 0 ‐ 8 sec 0 ‐ 10 sec 0 ‐ 4 sec 0 ‐ 1 sec Delay Units Milliseconds Milliseconds Milliseconds Milliseconds Milliseconds Milliseconds Emulation Data Rates 300bps ‐ 40Gbps 300bps ‐ 1 GbE 300bps ‐ 1 GbE 300bps ‐ 1 GbE 1.2k ‐ 52M 300bps ‐ 3.072Mbps Emulation Capacity 6 Ports, 3 Pairs 4 Ports, 2 Pairs 4 Ports, 2 Pairs 16 Ports, Routed 2 Ports, 1 Pair 2 Ports, 1 Pair Interface Copper/Fiber Copper/Fiber Copper Copper/Fiber Serial/Telco Serial Data Format UDP / TCP IP, ect UDP / TCP IP, ect UDP / TCP IP, ect UDP / TCP IP, ect Sync / Async Sync Error Insertion Yes No No No Yes ‐ Full BERT No Jitter Yes Yes Yes Yes N/A N/A Loss Yes Yes Yes Yes Yes No Re‐Ordering Yes Yes Yes Yes N/A N/A Background Traffic Yes Yes Yes Yes N/A N/A Duplication Yes Yes Yes Yes N/A N/A Data Corruption Yes No No No N/A N/A Filtering Yes No No Yes N/A N/A Auto Profile Scheduler Yes Yes Yes Yes No No Data Logger Yes Yes Yes Yes No No Config Port(s) 10/100/1000 10/100 10/100 10/100 10/100 or Serial Dip Switches Full Command Line Yes No No No Yes No GUI Support Yes Yes Yes Yes Yes No Multiple Users Yes No No Yes No No Jumbo Frames Yes Yes Yes Yes N/A N/A Clock Source N/A N/A N/A N/A Int/Ext Internal Test Interfaces EDS‐10G EDS‐1G EDS‐1G BGP‐EDS RDS‐PLUS UDC‐RDS 10/100/1000 Yes Yes Yes Yes No No 10/40GbE Yes No No No No No RS‐232 No No No No Yes Yes V.35 No No No No Yes Yes RS‐530 No No No No Yes Yes RS‐422 No No No No Yes Yes X.21 No No No No Yes Yes RS‐485 No No No No Yes Yes HSSI No No No No Yes No EIA‐644 LVDS No No No No Yes No TTL No No No No Yes Yes T‐1 No No No No Yes No E‐1 No No No No Yes No DS3 No No No No Yes No E3 No No No No Yes No STS‐1 No No No No Yes No
http://www.ecdata.com Tel: (321) 637‐9922 Email:
[email protected]
