Transcript
INSTRUCTION MANUAL Guess Watches
WOMEN’S
Congratulations on owning your new GUESS Watch. Developed from advanced electronics technology, the movement is manufactured from the best quality components and powered by a long life battery.
HIGH PERFORMANCE FEATURES 30 METERS (3 ATM) TO 100 METERS (10 ATM) For style with 10 ATM, suitable for swimming, sailing, sail boarding, surfing and shallow diving.
WATER RESISTANT GENUINE LEATHER BANDS Specially developed water resistant leathers and construction are used in all GUESS straps.
HIGH QUALITY STAINLESS STEEL CASE & BRACELET
3
WOMEN’S
OPERATING OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Simple Time/Mini Sweep/Dual Time INSTRUCTIONS
SIMPLE TIME / MINI SWEEP / DUAL TIME SIMPLE TIME / MINI A B SWEEP / DUAL TIME
A B A B
A B
crown position
A B B
time: To To setset thethe time: 1.the PULL out crown B position. PULL out crown to B to position. To1.set time: 2. TURN crown either way to correct TURN crown either to correct time.time. 1. 2.PULL out crown to B way position. 3. Push in either crown to Atoposition. 2. 3.TURN correct time. Push crown in crown to Away position. 3. Push in crown to A position.
A B
CALENDAR / DATE Calendar/Date CALENDAR / DATE To set the time: To set the time: A B C 1.the PULL out Crown to C position. To1.set time: PULL out Crown to C position. 2. TURN crown way to correct time. 1. 2.PULL out Crown to either Cway position. TURN crown either to correct time. 3. PUSH in crown to A 2. TURN crown either way toposition. correct time. 3. PUSH in crown to A position. 3. PUSH in crown to A position. To set the calendar / date: crown position To 1. set PULL the calendar / to date: out crown B position. To set the calendar / date: 1. PULL out crown tocounter B position. 2. TURN crown clockwise or towards you to correct date. 1. PULL out crown to B position. 2. TURN crown counter clockwise or towards you to correct date. 3. PUSH in crown to A position. 2. TURN crown counter clockwise or towards you to correct date. NOTE: The date changes PUSH crown position.automatically every 24 hours. 3. 3.PUSH inincrown totoAA position. NOTE: changes automatically every24 24hours. hours. NOTE: The The datedate changes automatically every 2
2
4
WOMEN’S
DAY / DATE / 24 HOUR Day/Date/24 Hour DATE date
day DAY
A A B B C C
A B B C C A
A B B C C A
24-HOUR 24 hour
crown position crown position
DATE date
day DAY
date DATE
day DAY
date DATE
A B C
DATE date
11 22 33 A B C day DAY
crown crown position
date DATE
position
date DATE
DAY day
24-HOUR 24 hour
24-HOUR 24 hour
month setting
24-HOUR 24 hour
2424-HOUR hour
MONTH SETTING button BUTTON
A A B B C C
day DAY
A A B B C C A B C
DAY day
MONTH month 24-HOUR 24 hour
crown crown position position
crown position crown position
DATE date SECOND second
24 hour 24-HOUR DATE date
Totime: set time: To set To set day: 1. PULL out crown to C position. 1. PULL out crown to C position. 1. PULL out crown to C position. 2. TURN crown either way to correct time. 2. TURN crown either way to correct time. 2. Advance time 24 hours to change the day. 3. PUSH in crown to A position. 3. PUSH in crown to A position.
3. PUSH in crown to A position. NOTE: 24 hour indicator can change only when setting the time.
Todate: set date: To set NOTE the date changes automatically every 24 hours. NOTE the date changes automatically 1. PULL out crown to B position. To set month: every2.24 TURN hours.crown clockwise to correct date. Push month setting button until the small 1. PULL out crown to B position. 3. PUSH in crown to A position. 2. TURN crown clockwise to correct date. 3. PUSH in crown to A position.
hand of month is set to the correct month.
3
5
WOMEN’S
month.
6,9,12 Three-eye withDate Date 6, 9, 12 Three-eyeChronograph Chronograph with 1/10 seconds
PUSHER A crown position
A B
C
PUSHER B
minute seconds
Crown position “A” , “B” & “C”. Crown position A ,“A” B &(top) C. & “B” (bottom). CALENDAR Pushers Pushers A12 (top) and eye B (bottom). To set the calendar: o’clock “1/10 seconds elapsed”. o’clock “minutes elapsed”. 12 o’clock9 eye 1/10eye seconds elapsed. 1. PULL out crown to B position. 6 o’clock eye “seconds elapsed”. 9 o’clock eye minutes elapsed. 2. TURN crown clockwise to correct date. 6 o’clock eye seconds elapsed. 3. PUSH in crown to A position.
This chronograph watch has 3 functions:
NOTE: The date changes automatically every 4 24 hours.
TIME, CALENDAR, STOPWATCH.
STOPWATCH TIME To set the time: 1. PULL crown to C position. 2. TURN crown either way to correct time. 3. PUSH crown into A position.
The stopwatch is capable of measuring: 1/10 seconds elapsed up to one second (top eye). Minutes elapsed up to one hour (middle eye). Seconds elapsed up to one minute (bottom eye) * BEFORE USING THE STOP WATCH, reset the stopwatch hands to the 60 and 0 positions.
6
WOMEN’S
6, 9, 12 Three-eye Chronograph with Date (continued)
To reset stopwatch hands: 1. PULL crown to position C. 2. PRESS pusher A intermittently until the top eye hand is reset to 0. 3. PRESS pusher B intermittently until the middle and top eye hands is reset to 60. NOTE: PRESSING and HOLDING either pusher A or B will cause the hands to continue to move until the pusher is released.
If the stopwatch hands move improperly: 1. PULL out the crown to B position. 2. PRESS pushers A and B simultaneously for three seconds. 3. RELEASE pushers, stopwatch hands will move 180 degrees. 4. PUSH crown in to A position.
Standard stopwatch measurement: 1. PRESS pusher A to start timing. 2. PRESS pusher A to stop timing. 3. PRESS pusher B to reset.
Timing 2 competitors:
Split time:
1. PRESS pusher A to start timing. 2. PRESS pusher B to stop timing. 3. PRESS pusher A to stop timing of second event. 4. PRESS pusher B to view time of second event. 5. PRESS pusher B to reset.
1. PRESS pusher A to start timing. 2. PRESS pusher B to split. 3. PRESS pusher B to begin again. 4. PRESS pusher A to stop. 5. PRESS pusher B to reset.
7
WOMEN’S
6, 12 Two-Eye Chronograph With DateDATE 6,12 TWO-EYE CHRONOGRAPH WITH chronograph minute handHAND CHRONOGRAPH MINUTE
PUSHER A crown position
A B
C
PUSHER B
chronograph second hand CHRONOGRAPH
SECOND HAND
second SECOND
Crown position “B” & “C”. Crown position A, B“A” and, C. Pushers “A”and (top) & “B” (bottom). Pushers A (top) B (bottom). 12 o’clock eye “1 minute up to maxinum 60 minute”. 12 o’clock eye 1 minute up to maxinum 60 minute. 6 o’clock eye “second”. 6 o’clock eye second. This chronograph watch has 3 functions: This chronograph watch has 3 functions: TIME, CALENDAR, STOPWATCH. TIME, CALENDAR, STOPWATCH.
TIME TIME To set the time: To set the time: 1. PULL crown to “C” position. 1. PULL crown to C position. 2. TURN crown either way to correct time. 2. TURN crown eitherinway to position, correct time. 3. PUSH crown to “A” small second hand begins to run. 3. PUSH crown in to A position, small second hand begins to run.
7
8
WOMEN’S
6, 12 Two-Eye Chronograph With Date (continued)
CALENDAR To set the calendar: 1. PULL out crown to B position. 2. TURN crown clockwise to correct date. 3. PUSH in crown to A position. NOTE: The date changes automatically every 24 hours.
STOPWATCH The stopwatch is capable of measuring: 1/1 second elapsed up to maxinum of 60 minute (top eye). BEFORE USING THE STOP WATCH, reset the stopwatch hands to the 60 and 0 positions.
To reset stopwatch hands: 1. PULL crown to position C. 2. PRESS pusher A intermittently until the chronograph second hand is reset to 0.
Standard stopwatch measurement: 1. PRESS pusher A to start timing. 2. PRESS pusher A to stop timing. 3. PRESS pusher B to reset.
Accumulated elapsed time measurement: 1. PRESS Pusher A to start timing. 2. PRESS Pusher A to stop timing. 3. PRESS pusher A to restart timing. 4. PRESS Pusher A to stop 2nd timing. 5. PRESS Pusher B to reset.
9
WOMEN’S
Ana-Digit
ANA-DIGIT
EL EL
S2 S2
S1 S1
FEATURES Hour, Minute, Second FEATURES Month, Date Hour, Minute, Second Back Light Month, Date (EL) Back Light (EL)
NORMAL TIME MODE 1. PRESS S1 once to view Month & Date NORMAL TIME MODE PRESS S1 twice to view Second 1. 2. PRESS S1 once to view Month & Date 3. PRESS S2 once, ""Time"" & ""Date"" mode will be displayed alternatively 2. PRESS S1 twice to view Second PRESS S1 twice, back to Time mode" 3. PRESS S2 once, Time & Date mode will be displayed alternatively 4. PRESS EL to light-up display PRESS S1 twice, back to Time mode 4. PRESS EL to light-up display
SETTING SEQUENCE 1. PRESS S2 twice to set "Month"; Press S1 to advance SETTING SEQUENCE 2. PRESS S2 once to set "Date"; Press S1 to advance 1. 3. PRESS S2 twice to set Month; Press S1 S1 to advance PRESS S2 once to set "Hour"; Press to advance 2. 4. PRESS S2 once to set Press S1 to advance PRESS S2 once to Date; set "Minute"; Press S1 to advance 3. 5. PRESS S2 once to set Hour; PressisS1 to advance PRESS S2 once when setting complete. Normal time will be displayed (Press S1 if time mode does not flash). 4. PRESS S2 once to set Minute; Press S1 to advance 5. PRESS S2 once when setting is complete. Normal time will be displayed (Press S1 if time mode does not flash).
9
10
WOMEN’S
MEN’S
Congratulations on owning your new GUESS Watch. Developed from advanced electronics technology, the movement is manufactured from the best quality components and powered by a long life battery.
HIGH PERFORMANCE FEATURES 30 METERS (3 ATM) TO 100 METERS (10 ATM) For style with 10 ATM, suitable for swimming, sailing, sail boarding, surfing and shallow diving.
WATER RESISTANT GENUINE LEATHER BANDS Specially developed water resistant leathers and construction are used in all GUESS straps.
HIGH QUALITY STAINLESS STEEL CASE & BRACELET MINERAL CRYSTALS All GUESS watches are manufactured with mineral crystals for increased water and scratch resistance, as well as greater durability.
12
MEN’S
OPERATING OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Simple Time/Mini Sweep/Dual Time INSTRUCTIONS
SIMPLE TIME / MINI SWEEP / DUAL TIME SIMPLE TIME / MINI SWEEP / DUAL TIME
A B
A B
crown position
A B
time: To To setset thethe time: 1.the PULL out crown B position. PULL out crown to B to position. To1.set time: 2. TURN crown either way to correct TURN crown either way to correct time.time. 1. 2.PULL out crown to B position. 3. Push in crown to A position. 2. 3.TURN either to correct time. Push crown in crown to Away position. 3. Push in crown to A position.
A B
CALENDAR / DATE Calendar/Date CALENDAR / DATE To set the time: To set the time: 1.the PULL out Crown to C position. To1.set time: PULL out Crown to C position. 2. TURN crown way to correct time. 1. 2.PULL out Crown to either Cway position. TURN crown either to correct time. 3. PUSH in crown to A 2. TURN crown either way toposition. correct time. 3. PUSH in crown to A position. 3. PUSH in crown to A position. To set the calendar / date: To 1. set PULL the calendar / to date: out crown B position. To set the calendar / date: 1. PULL out crown tocounter B position. 2. TURN crown clockwise or towards you to correct date. 1. PULL out crown to B position. 2. TURN crown counter clockwise or towards you to correct date. 3. PUSH crown to A position. 2. TURN crownincounter clockwise or towards you to correct date. NOTE: The date changes PUSH crown position.automatically every 24 hours. 3. 3.PUSH inincrown totoAA position.
crown position
NOTE: changes automatically every24 24hours. hours. NOTE: The The datedate changes automatically every 2
2
13
MEN’S
DAY / DATE / 24 HOUR Day/Date/24 Hour DATE date
day DAY
A A B B C C
A B B C C A
A B B C C A
24-HOUR 24 hour
crown position crown position
DATE date
day DAY
date DATE
day DAY
date DATE
A B C
DATE date
11 22 33 A B C day DAY
crown crown position
date DATE
position
date DATE
DAY day
24-HOUR 24 hour
24-HOUR 24 hour
month setting
24-HOUR 24 hour
2424-HOUR hour
MONTH SETTING button BUTTON
A A B B C C
day DAY
A A B B C C A B C
DAY day
MONTH month 24-HOUR 24 hour
crown crown position position
crown position crown position
DATE date SECOND second
24 hour 24-HOUR DATE date
Totime: set time: To set To set day: 1. PULL out crown to C position. 1. PULL out crown to C position. 1. PULL out crown to C position. 2. TURN crown either way to correct time. 2. TURN crown either way to correct time. 2. Advance time 24 hours to change the day. 3. PUSH in crown to A position. 3. PUSH in crown to A position.
3. PUSH in crown to A position. NOTE: 24 hour indicator can change only when setting the time.
Todate: set date: To set NOTE the date changes automatically every 24 hours. NOTE the date changes automatically 1. PULL out crown to B position. To set month: every2.24 TURN hours.crown clockwise to correct date. Push month setting button until the small 1. PULL out crown to B position. 3. PUSH in crown to A position. 2. TURN crown clockwise to correct date. 3. PUSH in crown to A position.
hand of month is set to the correct month.
3
14
MEN’S
Date/24 Hour
DATE / 24 HOUR thetime: time: To To setsetthe
A
1. PULL out Crown to B position. 1. PULL out Crown to B position. 2. TURN Crown counter-clockwise to correct time. 2. TURN Crown counter-clockwise to correct time. 3. PUSH in Crown to A position. 3. PUSH in Crown to A position.
2•
4•
6•8
• 10 •
12 • 14 • 16 • 1 8•2 0•
22 •
B
C
crown position
24
the24 24 hour hour indicator: To To setsetthe indicator:
0•
1. PULL Crown to 1. PULL outoutCrown toCCposition. position. 2. TURN Crown either to to correct time. time. 2. TURN Crown eitherway way correct 3. PUSH in Crown to A position. 3. PUSH in Crown to A position.
To set the date: To 1. setPULL theout date: Crown to B position.
1. PULL outCrown Crown to B position. 2. TURN clockwise to correct date. 2. TURN Crown clockwise to correct date. 3. PUSH in Crown to A position. 3. PUSH in Crown to A position.
DAY / DATE / 24 HOUR
Crown
Day
Day
Date 24 Hour
To set the time:
1. PULL out Crown to C position.
Crown Date
24 Hour
15
MEN’S
3. PUSH in Crown to A position.
Day/Date/24 Hour DAY / DATE / 24 HOUR A
B
C
A
crown Crown
Day day
C
day Day
date Date 24 24 hour Hour
B
crown Crown date Date
24 hour Hour
To set the time:
1. PULL out Crown to C position.
To set2. the time: TURN Crown clockwise/counter-clockwise to correct time.
1. PULL totoCAposition. 3. out PUSHCrown in Crown position. 2. TURN Crown clockwise/counter-clockwise to correct time. To set the date:to A position. 3. PUSH in Crown 1. PULL out Crown to B position. 2. TURN Crown counter-clockwise to correct date. To set3. the date: PUSH in Crown to A position. 1. PULL out Crown to B position. 2. TURN Crown counter-clockwise to correct date. 4 3. PUSH in Crown to A position.
To set the day: 1. PULL out Crown to C position. 2. Advance time 24 hours to change the day. 3. PUSH in Crown to A position. Note: 24 Hour indicator changes automatically when time is adjusted.
16
MEN’S
3. PUSH in Crown to A position. Note: 24 Hour indicator changes automatically when time is adjusted.
The Three Eye Chronograph
THE THREE EYE CHRONOGRAPH This chronograph watch 2 functions: This chronograph watch hashas 2 functions:
TIME, STOPWATCH. TIME, STOPWATCH. The left eye (stopwatch hand) measures minutes The left eye (stopwatch hand) elapsed on stopwatch, up tomeasures a maximum minutes of 60 minutes. elapsed on stopwatch, up to a maximum 60 minutes. The centre eye (stopwatch hand) measuresofseconds elapsed on stopwatch, up to a maximum of 60 seconds. It also shows measurement of elapsed time. The centre eye (stopwatch hand) measures seconds The right eye (24 hour hand) indicates time on a 24 hour elapsed on stopwatch, up to a maximum of 60 seconds. basis.
PUSHER A
B A PUSHER B stopwatch
24 hour seconds
TIME measurement of elapsed time. It also shows To set time: The right eye (24 hour hand) indicates time on a 24 hour basis. 1. PULL out crown to B position 2. TURN crown either way to correct time TIME 3. PUSH crown to A position NOTE: If eye indicating 24 hours needs adjustment, advance watch hands by 12 hours. To set time: 1. PULL out crown to B position STOPWATCH: 2. TURN crown either way to correct time The stopwatch can measure up to 1 hour in minutes and seconds. Before using the stopwatch 3. PUSHensure crownthat tostopwatch A position hands are at the ‘60’ or ‘12 o’clock’ position. NOTE: If eye indicating 24 hours needs adjustment, advance watch hands adjust hands: by 12 To hours. 1. PULL out Crown to B positions. 2. PRESS pusher A or B to adjust hands. STOPWATCH: 3. PUSH Crown to A position. The stopwatch can measure up to 1 hour in minutes and seconds. Before using the To set stopwatch: stopwatch ensure that stopwatch hands are at the 60 or 12 o’clock position. 1. PRESS pusher A to start timing. 2. PRESS pusher A to stop timing. 3. PRESS pusher B to reset stopwatch to ‘60’. 5
17
MEN’S
3. PUSH in Crown to A position. Note: 24 Hour indicator changes automatically when time is adjusted.
The Three Eye Chronograph (continued)
THE THREE EYE CHRONOGRAPH This chronograph watch has 2 functions: To adjust hands:
PUSHER A
STOPWATCH. 1. PULL TIME, out Crown to B positions. The left eye (stopwatch hand) measures minutes 2. PRESS pusher A or B toup adjust hands.of 60 minutes. B elapsed on stopwatch, to a maximum A 3. PUSHThe Crown A (stopwatch position. hand) measures seconds centretoeye PUSHER B elapsed on stopwatch, up to a maximum of 60 seconds. It also shows measurement of elapsed time. To set stopwatch: stopwatch 24 hour The right eye (24 hour hand) indicates time on a 24 hour 1. PRESS pusher A to start timing. basis. seconds 2. PRESS pusher A to stop timing. TIME 3. PRESS pusher B to reset stopwatch to 60. To set time: 1. PULL out crown to B position To measure elapsed or split 2. TURN crown either way totime: correct time 1. PRESS A totostart timing. 3. pusher PUSH crown A position NOTE: If eye hours needs adjustment, advance watchtohands by seconds 12 hours. elapsed 2. PRESS pusher Bindicating to stop 24 timing. The stopwatch continues count
but the hands do not move. STOPWATCH: 3. PRESS pusher B again to resume timing. The stopwatch can measure up to 1 hour in minutes and seconds. Before using the stopwatch The hands move indicate and continue ensure thatquickly stopwatchtohands are atelapsed the ‘60’ or time ‘12 o’clock’ position. counring. To adjust NOTE: The hour, hands: minute and second hands on the watch will continue to indicate 1. PULL out Crown to B positions. the correct time while using the stopwatch. 2. PRESS pusher A or B to adjust hands. 3. PUSH Crown to A position.
If stopwatch hands do not return to 60 when the stopwatch is reset: stopwatch: 1. PULL To outsetthe crown. 1. PRESS pusher A to start timing. 2. PRESS pushers A or B repeatedly to move hands to 60 position. 2. PRESS pusher A to stop timing. 3. PUSH3.in the crown. PRESS pusher B to reset stopwatch to ‘60’. 5
18
MEN’S
6,9,12 THREE-EYE 6, 9, 12 Three-Eye Chronograph With and Without Date CHRONOGRAPH WITH & WITHOUT DATE 1/10 seconds
1/10 seconds
PUSHER A crown position
PUSHER A crown position A B
A C
C
PUSHER B
PUSHER B minute
minute seconds
Crown position “A”, “B” & “C”. Pushers “A” (top) & “B” (bottom) 12 o’clock eye “1/10 seconds elapsed” Crown position , B“minutes & C. elapsed” 9 o’clockAeye o’clockand eye “seconds elapsed” Pushers A6(top) B (bottom).
seconds
CALENDAR To set the calendar:
12 o’clock eye 1/10 seconds elapsed. 1. PULL out crown to B position. This chronograph watch has 3 functions: 9 o’clock eye minutes elapsed. 2. TURN crown clockwise to correct date. TIME, CALENDAR, STOPWATCH 6 o’clock eye seconds elapsed. 3. PUSH in crown to A position. This chronograph watch has 3 functions: TIME, CALENDAR, STOPWATCH.
TIME To set the time: 1. PULL crown to C position. 2. TURN crown either way to correct time. 3. PUSH crown into A position.
NOTE: The date changes automatically every 624 hours.
STOPWATCH The stopwatch is capable of measuring: 1/10 seconds elapsed up to one second (top eye). Minutes elapsed up to one hour (middle eye). Seconds elapsed up to one minute (bottom eye) * BEFORE USING THE STOP WATCH, reset the stopwatch hands to the 60 and 0 positions.
19
MEN’S
BEFORE USING THE STOP WATCH, reset the stopwatch hands to the “60” and “0” positions.
2, 6, 10 Three-Eye Chronograph 2,6,10 THREE-EYE CHRONOGRAPH NOTE: Crown position “1”, & “3” NOTE: Crown position 1, 2“2”and 3 NOTE: Pushers “A” (top) & “B” NOTE: Pushers A (top) and B (bottom) (bottom) NOTE: “minutetotalizer totalizer” NOTE: LeftLeft eyeeyeminute NOTE: Right eye “small second” NOTE: Right eye small second NOTE: Centre eye “date indicator” NOTE: Centre eye date indicator
seconds
minute
PUSHER A 1 2
3 crown position
This chronograph watch has 3 functions: This TIME, chronograph watch has 3 functions: CALENDAR, STOPWATCH
PUSHER B
TIME, CALENDAR, STOPWATCH
TIME TIMETo set the time: To set 1. the PULLtime: Crown to position “3” .
date
1. PULL Crown to position 2. TURN Crown either way 3. to correct time. 3. PUSH Crown to position “1” correct . 2. TURN Crown either way to time. 3. PUSH Crown to position 1.
CALENDAR To set the calendar:
7
1. PULL Crown to position 2. 2. TURN Crown clockwise to correct the date. 3. PUSH in Crown to position 1.
STOPWATCH The stopwatch is capable of measuring: 1. Minutes elapsed up to 30 minutes (left eye). 2. Chronograph hand 1/5 second BEFORE USING THE STOPWATCH, reset the stopwatch hands to the 60 position by means of pusher B. If stopwatch Hands move improperly, reset the hands as follows:
20
MEN’S
2, 6, 10 Three-Eye Chronograph (continued) To reset stopwatch hands: 1. PRESS Pusher A and B. 2. PRESS Pusher B intermittently until the left eye hand is reset to 0. 3. PRESS Pusher A intermittently until the chronograph hand reset to 60. 4. PRESS Pusher A and B. NOTE: PRESSING and HOLDING either Pusher A or B will cause the hands to continue to move until the pusher is released.
Standard stopwatch measurement: 1. PRESS Pusher A to start timing. 2. PRESS Pusher A to stop timing. 3. PRESS Pusher B to reset.
Accumulated elapsed time measurement: 1. PRESS Pusher A to start timing. 2. PRESS Pusher A to stop timing. 3. PRESS Pusher A to restart timing. 4. PRESS Pusher A to stop 2nd timing. 5. PRESS Pusher B to reset.
Split time measurement: 1. PRESS Pusher A to start timing. 2. PRESS Pusher B to split. 3. PRESS Pusher B to begin again. 4. PRESS Pusher A to stop. 5. PRESS Pusher B to reset.
Timing 2 competitors: 1. PRESS Pusher A to start timing of first event. 2. PRESS Pusher B to stop timing of first event. Stopwatch continues to run internally. 3. PRESS Pusher A to stop timing of second event. 4. PRESS Pusher B to view time of second event. 5. PRESS Pusher B to reset.
21
MEN’S
4. PRESS Pusher “B” to view time of second event. 5. PRESS Pusher “B” to reset.
6, 12 Two Eye Chronograph With Date Crown position A, B and C. 6,12 TWO-EYE CHRONOGRAPH Pushers A (top) and B (bottom). position “B” & “C”. 60 minute. 6 o’clock eyeCrown 1 minute up“A”to, maxinum Pushers “A” (top) & “B” (bottom). 12 o’clock eye second. 6 o’clock eye “1 minute up to maxinum 60 minute”. 12 o’clockwatch eye “second”. This chronograph has 3 functions:
WITH DATE stopwatch second STOPWATCH SECOND
PUSHER A crown position
TIME, CALENDAR, STOPWATCH.
This chronograph watch has 3 functions:
A B
TIME, CALENDAR, STOPWATCH.
TIME To set the time: TIME
PUSHER B
To set time: 1. PULL Crown to the C position. 1. PULL Crown “C”correct position.time. 2. TURN Crown either waytoto 2. TURN Crown either to correct time. 3. PUSH Crown in to A position,way small second 3. to PUSH hand begins run.Crown in to “A” position, small second hand begins to run.
CALENDARCALENDAR To set the calendar: To set the calendar:
C
second HAND hand SECOND stopwatch minute STOPWATCH MINUTE
Standard stopwatch measurement:
1. PULL out Crown to “B” position. 1. PRESS Pusher A to start timing. 1. PULL out Crown to B position. 2. TURN Crown clockwise to correct date. 2. PRESS Pusher A to stop timing. 2. TURN Crown clockwise to correct date. 3. PUSH in Crown to “A” position. PRESS Pusher B to reset. 3. PUSH in Crown to A position. NOTE: The date changes automatically every 243. hours. NOTE: The date changes automatically Accumulated elapsed time measurement: every 24 hours. STOPWATCH 1. PRESS Pusher A to start timing. The stopwatch is capable of measuring: 2. PRESS Pusher A to stop timing. STOPWATCH 1/1 second elapsed up to 12 hours. 3. PRESS to restart timing. The stopwatch is capable measuring: BEFORE USING THE of STOP WATCH, reset the stopwatch handsPusher to the “0”A positions. 4. PRESS Pusher A to stop 2nd timing. 1/1 second elapsed up to 12 hours. To reset stopwatch hands: reset 5. PRESS Pusher B to reset. BEFORE USING THE STOP WATCH, 1. hands PULL Crown to 0 position “C”. the stopwatch to the positions. 2. PRESS Pusher “A” intermittently until the chronograph second hand is reset to “0”.
To reset stopwatch hands: 1. PULL Crown to position C. 2. PRESS Pusher A intermittently until the chronograph second hand is reset to 0.
9
22
MEN’S
4. PRESS Pusher “A” to stop 2nd timing. 5. PRESS Pusher “B” to reset.
3, 6, 9, 12 Four Eye Chronograph 3,6,9,12 FOUR-EYE CHRONOGRAPH Crown positionA“A” & “B” NOTE:NOTE: Crown position and B NOTE: Pushers “A” (top) & “B”(bottom) (bottom) NOTE: Pushers A (top) and B 12 o’clock eye1/10 “1/10” seconds elapsed” NOTE:NOTE: 12 o’clock eye ororseconds elapsed NOTE: 9 o’clock eye “minutes elapsed” NOTE: 9 o’clock eye minutes elapsed NOTE: 6 o’clock eye “seconds elapsed” NOTE: 6 o’clock eye seconds elapsed NOTE: 3 o’clock eye “24-hour” NOTE: 3 o’clock eye 24-hour
This chronograph watch has 2 functions: This chronograph watch has 2 functions: TIME, STOPWATCH. TIME, STOPWATCH.
1/10 seconds PUSHER A crown position B A PUSHER B stopwatch minute STOPWATCH MINUTE
24 hour 24-HOUR
stopwatch second STOPWATCH SECOND
TIME TIMETo set the time: To set1.the time: PULL Crown to “B” position. 2. Crown TURN Crown way to correct time. 1. PULL to Beither position. 3. PUSH Crown in toway “A” position. 2. TURN Crown either to correct time. 3. PUSH Crown in to A position.
STOPWATCH The stopwatch is capable of measuring: STOPWATCH 1/10 seconds elapsed up to 60of minutes (top eye). The stopwatch is capable measuring:
Minutes elapsed up to one hour (middle eye). 1/10 seconds elapsed up to 60 minutes (top eye). Seconds elapsed up to one minute (bottom eye) Minutes elapsed up to one hour (middle eye). Seconds elapsed up to one minute (bottom eye) BEFORE USING THE STOPWATCH, reset the stopwatch hands to the “60” and “0” positions. BEFORE USING THE STOPWATCH, reset the stopwatch hands to the 60 and 0 positions.
To reset stopwatch hands:
10 1. PULL Crown to position B. 2. PRESS Pusher A intermittently until the top eye hand is reset to 0. 3. PRESS Pusher B intermittently until the minute and second eye hands reset to 60. NOTE: PRESSING and HOLDING either Pusher A or B will cause the hands to continue to move until the pusher is released.
23
MEN’S
4. PRESS Pusher “A” to stop 2nd timing. 5. PRESS Pusher “B” to reset.
3, 6, 9, 12 Four Eye Chronograph (continued) 3,6,9,12 FOUR-EYE CHRONOGRAPH NOTE:stopwatch Crown positionmeasurement: “A” & “B” Standard
1/10 seconds
NOTE: Pushers “A” (top) & “B” (bottom) 1. PRESS Pusher A to start timing. NOTE: 12 o’clock eye “1/10” or seconds elapsed” 2. PRESS A eye to stop timing. NOTE:Pusher 9 o’clock “minutes elapsed” 3. PRESS Beye to reset. NOTE:Pusher 6 o’clock “seconds elapsed” NOTE: 3 o’clock eye “24-hour”
Accumulated elapsed time measurement: This chronograph watch has 2 functions: 1. PRESS A to start timing. TIME,Pusher STOPWATCH. 2. PRESS Pusher A to stop timing. TIMEPusher A to restart timing. 3. PRESS To setPusher the time:A to stop 2nd timing. 4. PRESS 1. PULL Crown to “B” position. 5. PRESS Pusher B to reset. 2. TURN Crown either way to correct time. 3. PUSH Crown in to “A” position.
PUSHER A crown position B A PUSHER B stopwatch minute STOPWATCH MINUTE
24 hour 24-HOUR
stopwatch second STOPWATCH SECOND
Split time measurement: STOPWATCH 1. PRESS Pusher A to start timing.
The stopwatch capable measuring: 2. PRESS Pusher Bisto stop of split. 1/10 seconds elapsed up to 60 minutes (top eye). 3. PRESS Pusher totobegin again. Minutes elapsedBup one hour (middle eye). 4. PRESS Pusher A to stop. Seconds elapsed up to one minute (bottom eye) 5. PRESS Pusher B to reset. BEFORE USING THE STOPWATCH, reset the stopwatch hands to the “60” and “0” positions.
10
24
MEN’S
3,6,9, 3, 6, 9, Three EyeTHREE-EYE Chronograph With Date CHRONOGRAPH WITH DATE 24 hour 24-HOUR
24 hour 24-HOUR
PUSHER A crown position
A
PUSHER A crown position
B
A
PUSHER B
STOPWATCH stopwatchMINUTE minute
B
C
PUSHER B
STOPWATCH stopwatchMINUTE minute stopwatch second STOPWATCH SECOND
stopwatch second STOPWATCH SECOND
Crown position “A”, “B” & “C”. Crown position B and C. Pushers “A” (top)A,& “B” (bottom). Pushers A (top) and B (bottom). 3 o’clock eye “24-hour”. 3 o’clock 24-hour. 9 o’clockeye eye “minutes elapsed”. 9 o’clock minuteselapsed”. elapsed. 6 o’clockeye eye “seconds 6 o’clock eye seconds elapsed.
This chronograph watch has 2 functions: TIME, STOPWATCH. watch has 2 functions: This chronograph TIME, STOPWATCH.
TIME To set the time: TIME To 1.setPULL theCrown time:to “B” position.
2. TURN Crown either way to correct time. 1. PULL Crown to B position. 3. PUSH Crown in to “A” position. 2. TURN Crown either way to correct time. 3. PUSH Crown in to A position. CALENDAR
STOPWATCH The stopwatch is capable of measuring: Minutes elapsed up to one hour (left eye). Seconds elapsed up to one minute (bottom eye)
To set the calendar:
CALENDAR 1. PULL out Crown to “B” position. To 2.setTURN theCrown calendar: clockwise to correct date.
1. PULL outin Crown position. 3. PUSH Crown toto “A”Bposition. 2. TURN Crown to correct date. NOTE: The date clockwise changes automatically every 24 hours. 3. PUSH in Crown to A position.
STOPWATCH
The stopwatch capable ofautomatically measuring: NOTE: The dateischanges every 24 hours Minutes elapsed up to one hour (left eye). Seconds elapsed up to one minute (bottom eye)
25
MEN’S
3, 6, 9, Three Eye Chronograph With Date (continued) BEFORE USING THE STOP WATCH, reset the stopwatch hands to the 60 and 12 o’clock positions.
To reset stopwatch hands: 1. PULL Crown to position B. 2. PRESS Pusher A or B intermittently until the stopwatch minute and second hand is reset to 0. NOTE: By pressing Pusher A, the hands move counter clockwise. By pressing Pusher B, the hands move clockwise.
Standard stopwatch measurement: 1. PRESS Pusher A to start timing. 2. PRESS Pusher A to stop timing. 3. PRESS Pusher B to reset.
Split time: 1. PRESS Pusher A to start timing. 2. PRESS Pusher B to stop split. 3. PRESS Pusher B to begin again. 4. PRESS Pusher A to stop. 5. PRESS Pusher B to reset.
Accumulated elapsed time measurement: 1. PRESS Pusher A to start timing. 2. PRESS Pusher A to stop timing. 3. PRESS Pusher A to restart timing. 4. PRESS Pusher A to stop 2nd timing. 5. PRESS Pusher B to reset.
26
MEN’S
6, 9, 12 Three Eye 1/20 Second Chronograph 6, 9, 12 THREE EYEWith Date 1/20 SECOND CHRONOGRAPH WITH DATE Crown position A,Crown B andposition C. “A”, “B” & “C”. Pushers “A” (top) & “B” (bottom). Pushers A (top) and B (bottom). 6 o’clock eye “hour & minutes elapsed”. 6 o’clock eye hour and minutes elapsed. 9 o’clock eye “second”. 9 o’clock eye second. 12 o’clock eye “1/20 seconds elapsed”. 12 o’clock eye 1/20 seconds elapsed.
1/20 1/20 SECONDS seconds stopwatch second STOPWATCH SECOND PUSHERAA PUSHER
crown position crown position
second SECOND A B C C A
This chronograph watch has 3 functions: This chronograph watch has 3 CALENDA. functions: TIME, STOPWATCH, TIME, STOPWATCH, CALENDAR.
TIME
To set the time: TIME To set the time: 1. PULL Crown to “C” position.
PUSHERBB PUSHER stopwatch hour STOPWATCH
HOUR
stopwatch minute STOPWATCH
MINUTE
TURN Crown either way to correct time. 1. PULL Crown to2.C position. 3. in to “A”time. position. 2. TURN Crown eitherPUSH wayCrown to correct 3. PUSH Crown in to A position.
CALENDAR
To set the calendar: CALENDAR 1. PULL out Crown to “B” position. To set the calendar:
2. TURN Crown clockwise to correct date. 1. PULL out Crown to B position. 3. PUSH in Crown to “A” position. 2. TURN Crown clockwise correct NOTE: Theto date changesdate. automatically every 24 hours. 3. PUSH in Crown to A position. Do not set the date between 9:00 PM and 1:00 AM. NOTE: The date changes automatically every 24 hours. Do not set the date between 9:00 PM and 1:00 AM. STOPWATCH The stopwatch is capable of measuring: STOPWATCH Hour & Minutes elapsed up to 12 hours (bottom eye). 1/20 Seconds elapsed up to 12 hours (top eye). The stopwatch is capable of measuring: Secondsup elapsed to 12 hours. Hour & Minutes elapsed to 12uphours (bottom eye). 1/20 Seconds elapsed up to 12 hours (top eye). USING THE STOP WATCH, reset the stopwatch hands to the “60” and “12 o’clock” Seconds elapsed BEFORE up to 12 hours. positions.
BEFORE USING THE STOP WATCH, reset the stopwatch hands To reset stopwatch hands: to the 60 and 12 o’clock 1. PULLpositions. Crown to position “C”. 2. PRESS Pusher “A” for 2 seconds until the stopwatch hour, minute and second hand is reset to 27 MEN’S “0”.
6, 9, 12 Three Eye 1/20 Second Chronograph With Date (continued) 6, 9, 12 THREE EYE 1/20 SECOND CHRONOGRAPH WITH DATE Crown position “A”, “B” & “C”. Pushers “A” (top) & “B” (bottom). 1. PULL Crown to position C. 6 o’clock eye “hour & minutes elapsed”. 2. PRESS Pusher A eye for “second”. 2 seconds until the stopwatch 9 o’clock hour, minute 12 and second hand is reset to 0. o’clock eye “1/20 seconds elapsed”.
To reset stopwatch hands:
Standard stopwatch measurement: This chronograph watch has 3 functions:
1/20 SECONDS seconds 1/20 stopwatch second STOPWATCH SECOND PUSHERAA PUSHER
crown position crown position
second SECOND A B C C A
PUSHERBB PUSHER 1. PRESS Pusher A to start timing. TIME, STOPWATCH, CALENDA. 2. PRESS Pusher A to stop timing. stopwatch hour stopwatch minute STOPWATCH STOPWATCH MINUTE HOUR 3. PRESS Pusher TIME B to reset. To set the time: Split time: 1. PULL Crown to “C” position. 2. TURN Crown way to correct time. 1. PRESS Pusher A to starteither timing. 3. PUSH Crown in to “A” 2. PRESS Pusher B to stop split. position. 3. PRESS Pusher B to begin again. CALENDAR 4. PRESS Pusher A to stop. To set the calendar: 5. PRESS Pusher B to reset. 1. PULL out Crown to “B” position. 2. TURN Crown clockwise to correct date. Accumulated time measurement: 3. elapsed PUSH in Crown to “A” position. 1. PRESS Pusher A to start timing. NOTE: The date changes automatically every 24 hours. 2. PRESS Pusher ADotonot stop timing. set the date between 9:00 PM and 1:00 AM. 3. PRESS Pusher A to restart timing. 4. PRESS Pusher A to stop 2nd timing. STOPWATCH 5. PRESS Pusher B to reset. The stopwatch is capable of measuring: Hour & Minutes elapsed up to 12 hours (bottom eye). 1/20 Seconds elapsed up to 12 hours (top eye). Timing 2 competitors: Seconds to 12 hours. 1. PRESS pusher A elapsed to startuptiming. 2. PRESS pusher B to stop timing of first event. Stopwatch continues to run internally. BEFORE THE STOP of WATCH, resetevent. the stopwatch hands to the “60” and “12 o’clock” 3. PRESS pusher A USING to stop timing second positions. 4. PRESS pusher B to view time of second event. 5. PRESS pusher B stopwatch to reset. hands: To reset
1. PULL Crown to position “C”. 2. PRESS Pusher “A” for 2 seconds until the stopwatch hour, minute and second hand is28 reset to MEN’S “0”.
5. PRESS pusher “B” to reset.
Digital With Alarm/Dual Time/Chronograph DIGITAL WITH ALARM / DUAL TIME / CHRONOGRAPH EL
S1
dual time DUAL TIME
change mode S3 CHANGE
S2 S2
SETTING
EL MODE
S3
S1
setting
FEATURES
Hour, Minute, Second
FEATURES Day, Date, Month
Hour, Second DualMinute, Time, Alarm, Timer Day, Date, Month Chronograph 1/100 Second with Split Back Light (EL) Dual Time, Alarm, Timer 15 Light (EL) Chronograph 1/100 Second with Split Back
OPERATION MODES 1. PRESS S3 once to view Time, Day, Date, Month 2. PRESS S3 once to view Alarm 3. PRESS S3 once to view Chronograph 5. PRESS S3 once to set Timer 6. PRESS S3 again back to Time Mode
SETTING SEQUENCE A) NORMAL TIME SETTING 1. HOLD S2 2 seconds to set Second; Press S1 for 00 2. PRESS S3 once to set Minute; Press S1 to advance 3. PRESS S3 once to set Hour; Press S1 to advance 4. PRESS S3 once to set hour display; Press S1 to set 12H/24H 5. PRESS S3 once to set Month; Press S1 to advance 6. PRESS S3 once to set Date; Press S1 to advance 7. PRESS S3 once to set Day; Press S1 to advance 8. PRESS S2 once when setting is complete. Normal time will be displayed.
29
MEN’S
Digital With Alarm/Dual Time/Chronograph (continued)
B) DUAL TIME SETTING . 1. PRESS S1 to Dual Time 2. HOLD S2 2 seconds to set Minute; Press S1 for 00 3. PRESS S3 once to set Hour; Press S1 to advance 4. PRESS S2 once when setting is complete. Normal time will be displayed.
C) ALARM SETTING PRESS S3 to Alarm Mode 1. PRESS S1 once to on Alarm ONLY 2. PRESS S1 once to on Chime ONLY 3. PRESS S1 once to on Alarm and Chime 4. PRESS S1 once to off Alarm and Chime 5. HOLD S2 2 seconds to set Hour; Press S1 to advance 6. PRESS S3 once to set Minute; Press S1 to advance 7. PRESS S2 once when setting is complete. Return to Alarm Mode.
D) CHRONOGRAPH PRESS S3 twice to Chronograph function 1. PRESS S1 to Start/ Stop timing 2. PRESS S2 to Split time 3. PRESS S1, then S2 to Reset
E) TIMER PRESS S3 three times to Time Mode 1. HOLD S2 2 seconds to set Hour; Press S1 to advance 2. PRESS S3 once to set Minute; Press S1 to advance 3. PRESS S2 once when setting is complete. 4. RESS S1 to Start/Stop 5. PRESS S2 to Reset When counting is complete, alarm will sound.
30
MEN’S
ANA-DIGIT Ana-Digit EL
EL
S2 S2
S1
S1
FEATURES FEATURES
Hour, Minute, Second Hour, Minute, Second Month, Date Month, Date Back Light (EL) Back Light (EL)
NORMAL TIME MODE 1. PRESSTIME S1 onceMODE to view Month & Date NORMAL
2. PRESS twice to Second 1. PRESS S1S1once toview view Month and Date 3. PRESS S2 once, ""Time"" & ""Date"" mode will be displayed alternatively 2. PRESS S1S1twice to view Second PRESS twice, back to Time mode" 3. PRESS S2ELonce, Time and Date mode will be displayed alternatively 4. PRESS to light-up display PRESS S1 twice, back to Time mode SETTINGELSEQUENCE 4. PRESS to light-up display 1. PRESS S2 twice to set "Month"; Press S1 to advance 2. PRESS S2 once to set "Date"; Press S1 to advance SETTING 3. PRESSSEQUENCE S2 once to set "Hour"; Press S1 to advance 1. PRESS S2S2twice Month; Press to advance 4. PRESS once totosetset "Minute"; Press S1 to S1 advance 5. PRESS S2 once when setting is complete. Normal time will be displayed (Press S1 if time mode 2. PRESS S2 once to set Date; Press S1 to advance does not flash). 3. PRESS S2 once to set Hour; Press S1 to advance 4. PRESS S2 once to set Minute; Press S1 to advance 17 Normal time will be displayed 5. PRESS S2 once when setting is complete. (Press S1 if time mode does not flash).
31
MEN’S
Digital With Alarm, Chronograph 1/100 Sec, Countdown and Dual Time DIGITAL WITH ALARM, CHRONOGRAPH 1/100 SEC, COUNTDOWN & DUAL TIME FEATURES FEATURES
Hour, Minute,Hour, Second Minute, Second Day, Date, Month Day, Date, Month Dual Time, Alarm, Countdown Dual Time, Alarm, Countdown ChronographChronograph 1/100 Second lapwith control 1/100with Second lap control Back Light (EL) Back Light (EL)
EL
EL
S1
S3 S3
S2 S2
S1
SETTING SEQUENCE SETTING SEQUENCE NORMAL TIME SETTING A) NORMALA)TIME SETTING
HOLD S2to 3 seconds to “Second”; S1 or for 00 1. HOLD S2 31.seconds Second; Press S1Press or S3 forS300 PRESS S2 once to set Press “Minute”; S1 or to advance / backward 2. PRESS S2 2.once to set Minute; S1Press or S3 toS3 advance / backward 3. PRESS S2 once to set “Hour”; Press S1 or S3 to advance / backward 3. PRESS S2 once to set Hour; Press S1 or S3 to advance / backward 4. PRESS S2 once to set “Year”; Press S1 or S3 to advance / backward 4. PRESS S2 once to set Year; Press S1 or S3 to advance / backward 5. PRESS S2 once to set “Month”; Press S1 or S3 to advance / backward 5. PRESS S2 6.once to set Month; S1 orS1S3 backward PRESS S2 once to setPress “Day”; Press or to S3 advance to advance // backward 6. PRESS S2 7.once to S2 set3 Day; Press S1 toornormal S3 totime advance HOLD seconds to return display. / backward 7. HOLD S2 3 seconds to return to normal time display. B) DUAL TIME SETTING B) DUAL TIME SETTING 1. PRESS S1 to Dual Time 1. PRESS S1 2.to Dual HOLD Time S2 2 seconds to set "Minute"; Press S1 for 00 PRESS S3toonce set "Hour"; Press S1 S1 tofor advance 2. HOLD S2 23.seconds settoMinute; Press 00 4. PRESS S2 once when setting is complete. Normal time will be displayed. 3. PRESS S3 once to set Hour; Press S1 to advance 4. PRESS S2 once when setting is complete. Normal time will be displayed. C) ALARM SETTING PRESS S3 to Alarm Mode C) ALARM SETTING 1. PRESS S1 to "Alarm 1" – “Alarm 5” PRESS S3 to Alarm Mode 2. HOLD S2 2 seconds until “AL” flash 1. PRESS S1 to Alarm 1 – Alarm 5 PRESS S1/S3 to set “Alarm” / “Chime” 2. HOLD S2 23.seconds flash PRESS S2until onceAL to set “Hour” Press S1 or S3 to advance / backward PRESS S1/S3 to set Alarm / Chime 4. PRESS S2 once to set “Minute” Press S1 or S3 to advance / backward 3. PRESS S2 5.once to S2 set3 Hour Press or S3 to advance HOLD seconds when S1 setting is complete. Return/tobackward Alarm Model. 4. PRESS S2 once to set Minute Press S1 or S3 to advance / backward 5. HOLD S2 3D)seconds when setting is complete. Return to Alarm Model. COUNTDOWN TIMER SETTING (i) PRESS S3 twice to Countdown Timer function [T1] (1~90 mins) 1) HOLD S2 2 seconds to set "Minute"; Press S1/S3 to advance / backward 2) HOLD S2 3 sec to end setting 3) PRESS S2 to start/stop countdown
32
MEN’S
Digital With Alarm, Chronograph 1/100 Sec, Countdown and Dual Time (continued)
D) COUNTDOWN TIMER SETTING (i) PRESS S3 twice to Countdown Timer function [T1] (1~90 mins) 1) HOLD S2 2 seconds to set Minute; Press S1/S3 to advance / backward 2) HOLD S2 3 sec to end setting 3) PRESS S2 to start/stop countdown (ii) PRESS S1 to get into Countdown timer [T2] (from normal time to preset time – within 24hrs) 1) HOLD S2 3 seconds to set Hour; Press S1/S3 to advance / backward 2) PRESS S2 once to set Minute Press S1 or S3 to advance / backward 3) HOLD S2 3 sec to end setting 4) PRESS S2 to start/stop countdown. Time different between Normal time and Preset time will be shown (iii) PRESS S1 to get into Countdown Day Timer [T3] 1) HOLD S2 3 seconds to set Year; Press S1/S3 to advance / backward 2) PRESS S2 once to set Month Press S1 or S3 to advance / backward 3) PRESS S2 once to set Day Press S1 or S3 to advance / backward 4) PRESS S2 once when setting is complete.
E) CHRONOGRAPH PRESS S3 three times to Chronograph Mode 1) PRESS S1 to select LAP (LAP) or Split (SPL) option 2) PRESS S2 to start/stop 3) PRESS S1 to get Lap/Split time 5) HOLD S2, then press S1 to Reset
33
MEN’S
