Waste From Electric And Electronic Equipment Disassembly

Transcript

Waste from Electric and Electronic Equipment (WEEE) Disassembly Instructions HP ProLiant 785 G5, DL785 G6, and DL980 G7 Servers HP Part Number: 5991-8092 Published: October 2010 © Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. he only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. 1 Product End-of-Life Disassembly Instructions The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of this product to remove components and materials requiring selective treatment. Models and Descriptions This document provides disassembly instructions for the servers listed in Table 1. Table 1 Servers Supported Marketing Name/Model Description HP ProLiant DL785 Generation 5 and 6 Servers Four or eight socket server HP ProLiant DL980 Generation 7 Server Four or eight socket server Items Requiring Selective Treatment This section provides information on what items in the server are classified as requiring selective treatment. Table 2 lists the classified items requiring selective treatment for the HP ProLiant DL785 Generation 5 Server. Table 2 HP ProLiant DL785 Generation 5 and 6 Servers Classified Items Requiring Selective Treatment Model HP ProLiant DL980 Generation 7 Server Item Description Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Qty. of Items Included in Product Notes • Processor memory board (8) Up to 17 • Midplane board (1) • I/O backplane (1) • SAS backplane (2) • Power supply backplane (1) • Media board (1) • System Insight Display board (1) • SHUV board (1) • SPI board (1) Batteries • System battery (1) Up to five • BBWC (4) Mercury containing components Zero Liquid Crystal Displays (LCD) with a surface greater than 100 square cm Zero Cathode Ray Tubes (CRT) Zero Capacitors / condensers (Containing PCB / PCT) Zero Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height Zero External electrical cables and cords Gas Discharge Lamps • Power cable (1) One Zero Models and Descriptions 3 Table 2 HP ProLiant DL785 Generation 5 and 6 Servers Classified Items Requiring Selective Treatment (continued) Model HP ProLiant DL980 Generation 7 Server Item Description Notes Qty. of Items Included in Product Plastics containing Brominated Flame Retardants Zero Components and parts containing toner and ink, • Processor heat sink thermal interface including liquids, semi-liquids (gel/paste) and toner material (8) Up to eight Components and waste containing asbestos Zero Components, parts and materials containing refractory ceramic fibers Zero Components, parts and materials containing radioactive substances Zero Items Requiring Selective Treatment This section provides information on what items in the server are classified as requiring selective treatment. Table 3 lists the classified items requiring selective treatment for the HP ProLiant DL980 Generation 7 Server. Table 3 HP ProLiant DL980 Generation 7 Server Classified Items Requiring Selective Treatment Model HP ProLiant DL980 Generation 7 Server Item Description Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Notes • System board (1) Qty. of Items Included in Product Up to 27 • SPI board (1) • PCI-X/PCI Express I/O expansion board or PCI Express I/O expansion board (1) • SFF PCI Express I/O Expansion (1) • XNC board (1) • Power supply backplane (1) • Lower CPU board (1) • Upper CPU board (1) • SAS backplane (1) • Memory riser board (16) • Media board (1) • System Insight Display board (1) • Batteries • System battery (1) Up to five • BBWC (4) 4 Mercury containing components Zero Liquid Crystal Displays (LCD) with a surface greater than 100 square cm Zero Cathode Ray Tubes (CRT) Zero Capacitors / condensers (Containing PCB / PCT) Zero Product End-of-Life Disassembly Instructions Table 3 HP ProLiant DL980 Generation 7 Server Classified Items Requiring Selective Treatment (continued) Model HP ProLiant DL980 Generation 7 Server Item Description Qty. of Items Included in Product Notes Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords Zero • Power cable (1) Nine • XNC cables (8) Gas Discharge Lamps Zero Plastics containing Brominated Flame Retardants Zero Components and parts containing toner and ink, • Processor heat sink thermal interface including liquids, semi-liquids (gel/paste) and toner material (8) Up to eight Components and waste containing asbestos Zero Components, parts and materials containing refractory ceramic fibers Zero Components, parts and materials containing radioactive substances Zero Required Tools Table 4 lists the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Table 4 Required Tools Tool Description Tool Size Philips screw driver #2 Flat-head screw driver Small Flat-head screw driver Large Torx tool T-10 Torx tool T-15 Product Disassembly Process Table 5 lists the basic steps that you should follow to remove components and materials requiring selective treatment. Table 5 Product Disassembly Process Step Process 1 Battery – locate battery and remove by hand or small flat blade screw driver. 2 Capacitor – locate capacitor and pry from the PCB with a large flat head screw driver. 3 PCB’s – follow removal instructions found in the system specific documentation if needed. Required Tools 5 *5991-8092* Printed in the US