Transcript
MS986000TX “Fremont” Sliding Door Media Cabinet Assembly Instructions
For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096
[email protected] www.seidal.com
“Fremont” Sliding Door Media Cabinet Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Hardware shown actual size. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below (SHOWN ACTUAL SIZE). You may receive extra hardware with your unit A
Quantity
of 1
Right Side Panel D
Quantity
of 1
Quantity E of 1
Quantity of 2
Sliding Door Quantity H of 1
Shelf
Quantity
of 1
F
Quantity of 1
Top Panel Quantity of 1
Back Panel
Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects.
Assembly Tool Required No. 2 Phillips Screwdriver (Not Included)
C
Support Panel
Left Side Panel
Bottom Panel G
B
For replacement parts or questions, please call Customer Service at 1-800-633-5096. Do not return product to store. Please call manufacturer for assistance, questions or parts.
“Fremont” Sliding Door Media Cabinet Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Hardware shown actual size. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below (SHOWN ACTUAL SIZE). You may receive extra hardware with your unit (1)
Quantity (2) of 12
8mm x 30 mm Wood Dowel (5)
Quantity (6) of 4
Plastic Anchor
Quantity (7) of 14
3.5mm x 10 mm Screw For Back Quantity of 1
(10)
Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the Assembly Tool Required surface with rough or abrasive objects.
Assembly Tool Required No. 2 Phillips Screwdriver (Not Included)
Quantity of 4
5/32” x 15mm Bolt For Handle Quantity of 2
(8)
Quantity of 1
3.5mm x 20mm Screw For Metal Bracket
Metal Bracket
Quantity (11) of 1
3.5mm x 25mm Screw For Wall
No. 2 Phillips Screwdriver
Quantity (4) of 2
Metal Handle
1/4” x 1” Bolt
Metal Pin (9)
Quantity (3) of 12
Quantity of 1
Plastic Chain For replacement parts or questions, please call Customer Service at 1-800-633-5096. Do not return product to store. Please call manufacturer for assistance, questions or parts.
“Fremont” Sliding Door Media Cabinet Parts List Assembly Instructions: Wood may scratch easily. Be careful when assembling. Do not scratch. Step 1. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated on the front page. Step 2. Put the Right Side Panel (A) on the soft working surface. Step 3. Insert Wood Dowel(1) into the predrilled holes in Right Side Panel(A). Step 4. Attach Support Panel(C) and Bottom Panel(D) to Right Side Panel(A) with Bolt(2), then fasten them. Quantity of 4
(1) 8mm x 30 mm Wood Dowel
Quantity of 4
(2)
Figure 1
1/4” x 1” Bolt
Step 1. Insert Wood Dowel(1) into the predrilled holes in Support Panel(C) and Bottom Panel(D). Step 2. Attach Left Side Panel(B) to Support Panel(C) and Bottom Panel(D) with Bolt(2), then fasten them.
Quantity of 4
(1) 8mm x 30 mm Wood Dowel
Quantity of 4
(2)
Figure 2
1/4” x 1” Bolt
“Fremont” Sliding Door Media Cabinet Parts List Step 1. Insert the Wood Dowel(1) into the predrilled holes in Side Panels(A,B). Step 2. Attach Top Panel(F) to Side Panels(A,B) with Bolts(2), Then fasten them.
Quantity of 4
(1) 8mm x 30 mm Wood Dowel
Quantity of 4
(2)
Figure 3
1/4” x 1” Bolt
Step 1. Insert the Sliding Door(E) into the groove in the Top Panel(F) and Support Panel(C).
Quantity of 2
(3) Metal Handle
Quantity of 4
(4)
Figure 4
5/32” x 15mm Bolt For Handle
“Fremont” Sliding Door Media Cabinet Parts List Step 1. Insert the Metal Pin (5) into desirous holes of inner Side Panels(A,B). Step 2. Put the Shelf(G) on the Metal Pin(5) in each section.
Quantity of 4
(5)
Figure 5
Metal Pin
Step 1. Attach the Back Panel(H) to Side Panels(A,B) with Srew For Back(6).
Quantity of 14
(6)
Figure 6
3.5mm x 10 mm Screw For Back
“Fremont” Sliding Door Media Cabinet Parts List Step 1. Attach Metal Bracket(7) to the back of Top Panel(F) with Screw For Metal Bracket(8). Step 2. Drill 1/4 pilot holes in near proximity of the Metal Bracket(7) attached to the Top Panel(F) and tap the Plastic Anchor(9) into wall. Step 3. Fasten Metal Bracket(7) using Screw For Wall(10) into the Plastic Anchor(9). (7)
Quantity of 2 Metal Bracket
(8)
Quantity of 1 3.5mm x 20 mm Screw For Metal Bracket
(9)
Figure 7
Quantity of 1 Plastic Anchor
(10) 3.5mm x 25mm Screw For Wall
Quantity of 1
Step 1. Move this item to the fastened wall Metal Bracket(7) and tie in both Metal Bracket(7) with Plastic Chain(11) as shown in diagram.
Quantity of 1
(11)
Figure 8
Plastic Chain
Customer Service 1-800-633-5096
[email protected] Southern Enterprises, Inc. 2915 Merrell Road Dallas, Texas 75229
MS986000TX Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No
Parts Letter
Parts Description
Quantity Needed
Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts. Southern Enterprises Inc. Will provide replacement parts for only those items purchased within the last 9 months. If this product has not been purchased from our retail affiliates (within 9 months), we are under no obligation to provide parts or replacement merchandise. Parts will not be available for items arriving fully assembled.
