Preview only show first 10 pages with watermark. For full document please download

Wednesday, May 16, 2007 Page 1

   EMBED

Share

Transcript

Wednesday, May 16, 2007 Set each of the 16 jumpers for either balanced or unbalanced. Audio Cable Audio Cable Audio Cable Audio Cable Audio Cable 2)DIN 1)9 Pin 9 Pin 2)26 Pin 26 Pin 5)Audio Cable MC-2020 rear panel 2)Din Customer Service 800-447-7204 Page 1 Wednesday, May 16, 2007 Each audio input can be configured for either balanced or unbalanced AES audio by connecting 75 ohm cable to the input BNC OR 3 wire audio cable to the terminal block. Relay closures occur between point A and B for each of the 21 relays. Operation of the relay(s) is determined by system programming. AES Reference Time Code Input Time Code 1 output Each audio output can be configured for either balanced or unbalanced AES audio by connecting 75 ohm cable to the output BNC OR 3 wire audio cable to the terminal block. The format must also be selected by setting the jumper on the opposite side of the panel. Time Code 2 Output SMPTE and TTL level alarms Page 2