Transcript
Klippon® K - Aluminium enclosures
Enclosures
Klippon® K – Aluminium enclosures
B
Klippon® K range enclosures can be used in a variety of applications, e.g. for mounting terminals, switches, power supplies, operational and display elements or electronic modules. The extensive Klippon® K enclosure range has the following advantages: • More flexibility – 19 different sizes • Available in two surface finishes – powder-coated and natural • Mounting holes not within the sealed area • Fastening thread to attach mounting rails and plates • Closed moulded gasket (no glue seam) Weidmüller can manufacture and supply this enclosure to match customer specifications and fitted with all necessary terminals and cable glands.
Tu"
\
Overview of enclosures Ordering data Description
Klippon® K 0 Klippon® K 01 Klippon® K 02 Klippon® K 1 Klippon® K 11 Klippon® K 2 Klippon® K 21 Klippon® K 3 Klippon® K 31 Klippon® K 32 Klippon® K 4 Klippon® K 41 Klippon® K 5 Klippon® K 51 Klippon® K 52 Klippon® K 6 Klippon® K 61 Klippon® K 7 Klippon® K 71 Note
Dimensions in mm
45 x 50 x 30 64 x 58 x 34 64 x 98 x 34 70 x 70 x 45 80 x 75 x 57 70 x 100 x 45 80 x 125 x 57 70 x 165 x 45 80 x 175 x 57 80 x 250 x 55 82 x 130 x 72 120 x 122 x 81 130 x 170 x 90 120 x 220 x 81 160 x 160 x 91 160 x 200 x 100 160 x 260 x 91 160 x 350 x 100 230 x 280 x 111 *Delivery time on request
Powder-coated (RAL 7001) Standard CR Silicone moulded seal moulded seal* 9529090000 1937920000 9529100000 1937850000 9529110000 1937840000 9529120000 1937630000 9529130000 1937910000 9529140000 1937930000 9529150000 1937830000 9529160000 1937900000 9529170000 1937820000 9529180000 1937810000 9529190000 1937890000 9529200000 1937800000 9529210000 1937860000 9529220000 1937750000 9529230000 1937740000 9529240000 1937870000 9529250000 1937730000 9529260000 1937880000 9529270000 1937720000
Standard
CR moulded seal 0573200000 1565240000 1565250000 0342000000 0573300000 0342100000 0573400000 0342200000 0573500000 1565260000 0342300000 1565270000 0342400000 1565280000 1565290000 0342500000 0573600000 0342600000 0573700000
Unpainted
Silicone moulded seal* 1939760000 1939540000 1939550000 1939560000 1939570000 1939580000 1939590000 1939600000 1939610000 1939620000 1939630000 1939640000 1939650000 1939660000 1939670000 1939690000 1939700000 1939710000 1939730000
Ex enclosure Silicone moulded seal
9526840000 9526850000 9526860000 9526870000 9526880000 9526890000 9526900000 9526910000 9526920000 9526930000 9526940000 9526950000 9526960000 9526970000 9526980000 9526990000
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] B.128
1420920000 – 2013/2014
Enclosures
Klippon® K - Aluminium enclosures
Technical Overview Features • Two surfaces: natural and powder-coated • High IP protection up to IP 68 • Moulded silicone gasket for applications with high temperatures • A uniform Torx®-slotted screw head is used for over 19 different enclosure sizes. • Alloy is resistant to salt water • Approved according to the latest international standards (e.g. ATEX, cULus, GOST) Note We deliver enclosures through our assembly service which are ready to be connected and suitable for every application
Technical data Enclosure material Surface, untreated Surface, painted Painting IP protection class NEMA Earthing outside Installation mounting Enclosure mounting Lid fixing Impact resistance Gasket material Temperature range Lid screws, torque** Note
Approvals for empty enclosures ATEX certificate ATEX marking IECEx certificate IECEx marking GOST Ex GOST cULus Russian Maritime Register Germanischer Lloyd Installation Note
Approvals for control and distribution box ATEX certificate ATEX marking IECEx certificate IECEx marking Note
Ex High quality aluminium alloy (Al-Si12) Smooth
IP 66, IP 67 Earthing studs, M4 Flexible DIN rail mounting Direct mounting with optional mounting brackets (from a size of 120 x 122 x 81 Klippon® K 41) Captive stainless steel Torx® 20 or slotted screws. 7J Silicone (VMQ) -50 °C...+135 °C
B
Standard High quality aluminium alloy (Al-Si12) Smooth Silver grey, textured, similar to RAL 7001 40 µm paint thickness IP 66, IP 67 and IP 68* 4, 4x Flexible DIN rail mounting Direct mounting with optional mounting brackets (from a size of 120 x 122 x 81 Klippon® K 41) Captive stainless steel Torx® 20 or slotted screws. 10J Chloroprene / Silicone (VMQ) -40 °C…+80 °C with chloroprene gasket / -50 °C…+135 °C with silicone gasket 2.5 Nm
2.5 Nm * (t=72h; h=1m) ** To secure the lid we recommend the use of our Torx® TH20 screwdriver (9009160000) Depending on the screw head size, our slotted screwdriver may also be used as an alternative
Ex KEMA 02ATEX2088 U II 2 G Ex e II IP66/IP67 IECEXIBE 13.0001 U Ex e IIC Gb POCC DE.ME92.B00362 POCC DE.ME25.B01450
Standard
POCC DE.ME25.B01450 E 197061 11040200 11040200 4453607 HH 4453607 HH The Klippon® K enclosure range can be pre-fitted in our customer specific production department according to your wishes; as an example, terminals, or other approved components, can be installed as required. This enclosure range is component certified. If other electrical components are inserted into the case, additional certification is required.
Ex Standard KEMA 00ATEX8501 X T II 2 GD Ex e II T6/T3 IP66/IP67 T II 2 (1) GD Ex e[ia] IIG T6/T3 IECEXIBE 13.0002 Ex e IIC T Gb Ex tb IIIC T °C Db If you have specific requirements for equipment operating in explosive hazard areas, please contact us at Weidmüller to receive a full copy of the certification.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] 1420920000 – 2013/2014
B.129
Klippon® K - Aluminium enclosures
Depth
30 mm
25
Enclosures
Klippon® K 0
50 30
C
E
F
9*
D
35
45
A
B
B 40
7.5*
35
25
7.2
40
64* XX* only for 9526810000
Height/Width/Depth
45 / 50 / 30 mm
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted Note
Standard (CR seal) Standard (silicone seal)**
Order No. 9529090000 1937920000
Standard (CR seal)
0573200000
Assembly with terminal
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Accessories Torx® screwdriver
Uninsulated Torx® TH20
Order No. 9009160000
Note
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical 1x1* 1x1*
horizontal 1x1* 1x1*
*Please refer to the Terminal Block catalogue or the SAK Range for more information about assembling the enclosures with terminal blocks. There are no prescribed possible attachment points in the enclosure.
Number of cable entries Number of cable entries
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 1 1
C/D 1 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Note
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] B.130
1420920000 – 2013/2014
Klippon® K - Aluminium enclosures
Enclosures
34 mm
7.5*
17.5
Depth
28
Klippon® K 01
10*
D
C
B 46
B
F
E
52
64
58 A
34
Height/Width/Depth
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted Note
XX* only for 9526820000
64 / 58 / 34 mm
Ordering data
77*
36
46
Standard (CR seal) Standard (silicone seal)**
Order No. 9529100000 1937850000
Standard (CR seal)
1565240000
Assembly with terminal
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Accessories Torx® screwdriver
Uninsulated Torx® TH20
Order No. 9009160000
Note
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical 1x1* 1x1*
horizontal 1x1* 1x1*
*Please refer to the Terminal Block catalogue or the SAK Range for more information about assembling the enclosures with terminal blocks. There are no prescribed possible attachment points in the enclosure.
Number of cable entries Number of cable entries
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 1 1
C/D 1 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Note
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] 1420920000 – 2013/2014
B.131
Klippon® K - Aluminium enclosures
34 mm
7.5*
Enclosures
17.5*
Depth
28.2
Klippon® K 02
10* 98
C
B
D
52
64
A
E
F
B 86
Height/Width/Depth
Max. number of terminals (industry)
powder-coated (RAL 7001)
Note
XX* only for 9526830000
64 / 98 / 34 mm
Ordering data
unpainted
Standard (CR seal) Standard (silicone seal)**
Order No. 9529110000 1937840000
Standard (CR seal)
1565250000
Assembly with terminal
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Accessories Torx® screwdriver
77*
36
86
Uninsulated Torx® TH20
Order No. 9009160000
Note
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical 1x1* 1x1*
horizontal 1x1* 1x1*
*Please refer to the Terminal Block catalogue or the SAK Range for more information about assembling the enclosures with terminal blocks. There are no prescribed possible attachment points in the enclosure.
Number of cable entries Number of cable entries
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 3 3 2
C/D 1 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Note
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] B.132
1420920000 – 2013/2014
Klippon® K - Aluminium enclosures
Depth
45 mm
38.5 32
Enclosures
Klippon® K 1
C
D
58
70
70 A
E
B 58
F
B 42
83.4*
7.5*
45
11*
58
XX* only for 9526840000
Height/Width/Depth
70 / 70 / 45 mm
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
Standard (CR seal) Standard (silicone seal)**
Order No. 9529120000 1937630000
Standard (CR seal) Ex enclosure (silicone seal)
0342000000 9526840000
Assembly with terminal
vertical 1x1* 1x1*
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
horizontal 1x5 1x1*
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set Mounting plate Torx® screwdriver
15 mm width
Order No. 1909980000
Steel sheet, zinc plated
1905280000
Uninsulated Torx® TH20
9009160000
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about populating the enclosures with terminal blocks. For vertical installations, we recommend using not more than one BK 4 or BK 4 CRN (0625120000). For horizontal installations with 2.5mm² 1x5 AKZ terminal blocks (only possible on a TS 15) for 4mm², use not more than one BK 4. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
Number of cable entries Number of cable entries
Note
A/B 2 2 1
M12 M16 M20 M25 M32 M40 M50 M63
C/D 1 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 61 52
52
Ø 4,5
1,5
Note
The accessory sets contain the necessary mounting material.
3
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] 1420920000 – 2013/2014
B.133
Klippon® K - Aluminium enclosures
57 mm
7.5*
51
44.3
Depth
Enclosures
Klippon® K 11
11* 75
B
C
D
F
E
68
80
A
B 63
57
Height/Width/Depth
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526850000
80 / 75 / 57 mm
Ordering data
93*
52
63
Standard (CR seal) Standard (silicone seal)**
Order No. 9529130000 1937910000
Standard (CR seal) Ex enclosure (silicone seal)
0573300000 9526850000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical 1x1* 1x1*
horizontal 1x5 1x4
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set Mounting plate Hinge, diecast zinc, Set Torx® screwdriver
15 mm width
Order No. 1909990000
Steel sheet, zinc plated
3073000000
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN (0625220000) in vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000 Uninsulated Torx® TH20
9009160000
Number of cable entries Number of cable entries
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 2 2 1 1
C/D 2 2 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 64
67
Ø5
2
Note
The accessory sets contain the necessary mounting material. Necessary on use of 1 hinge per longitudinal side.
56
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] B.134
1420920000 – 2013/2014
Klippon® K - Aluminium enclosures
45 mm
31.8
Enclosures
Depth
38.5
Klippon® K 2
100
C
D
58
70
A
E
B 88
F
B
45
42
83.4*
7.5*
11*
88
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526860000
70 / 100 / 45 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529140000 1937930000
Standard (CR seal) Ex enclosure (silicone seal)
0342100000 9526860000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 1x10
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set Mounting plate Torx® screwdriver
15 mm width
Order No. 1910010000
Steel sheet, zinc plated
1905270000
Uninsulated Torx® TH20
9009160000
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
Number of cable entries Number of cable entries
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 3 3 2
C/D 1 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 91
52
Ø 4,5
1,5
Note
The accessory sets contain the necessary mounting material.
82
3
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] 1420920000 – 2013/2014
B.135
Klippon® K - Aluminium enclosures
57 mm
7.5*
51
44.3
Depth
Enclosures
Klippon® K 21
11* 125
B
C
D
68
80
A
E
F
57
B 113
Height/Width/Depth
XX* only for 9526870000
80 / 125 / 57 mm
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
93*
52
113
Standard (CR seal) Standard (silicone seal)**
Order No. 9529150000 1937830000
Standard (CR seal) Ex enclosure (silicone seal)
0573400000 9526870000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 1x15 1x12
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set Mounting plate Hinge, diecast zinc, Set Torx® screwdriver
15 mm width
Order No. 1910020000
Steel sheet, zinc plated
3073020000
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about populating the enclosures with terminal blocks. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000 Uninsulated Torx® TH20
9009160000
Number of cable entries Number of cable entries
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 6 4 3 2
C/D 2 2 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 114
67
Ø5
2
Note
The accessory sets contain the necessary mounting material. Necessary on use of 1 hinge per longitudinal side.
106
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] B.136
1420920000 – 2013/2014
Klippon® K - Aluminium enclosures
45 mm
31.8
Enclosures
Depth
38.5
Klippon® K 3
165
45
D
12*
C
58
70
A
B
F
E
B
7.5*
153
42
153
178.4*
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526880000
70 / 165 / 45 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529160000 1937900000
Standard (CR seal) Ex enclosure (silicone seal)
0342200000 9526880000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 1x22
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set Mounting plate Torx® screwdriver
15 mm width
Order No. 1910030000
Steel sheet, zinc plated More tightly drawn
1898210000 1899630000
Uninsulated Torx® TH20
9009160000
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about populating the enclosures with terminal blocks. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
Number of cable entries Number of cable entries
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 6 5 4
C/D 1 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate
44
Ø 4,5
156
Note
The accessory sets contain the necessary mounting material.
8*
147,2
* ONLY FOR 1899630000
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] 1420920000 – 2013/2014
B.137
Klippon® K - Aluminium enclosures
Depth
57 mm
7.5*
51 44.3
Enclosures
Klippon® K 31
11* 175
C
B
D
F
E
68
80
A
B 163
57
Height/Width/Depth
XX* only for 9526890000
80 / 175 / 57 mm
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
93*
52
163
Standard (CR seal) Standard (silicone seal)**
Order No. 9529170000 1937820000
Standard (CR seal) Ex enclosure (silicone seal)
0573500000 9526890000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 1x23 1x19
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set Mounting plate Hinge, diecast zinc, Set Torx® screwdriver
35 mm width
Order No. 1910040000
Steel sheet, zinc plated
3073040000
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about populating the enclosures with terminal blocks. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
1580360000 Uninsulated Torx® TH20
9009160000
Number of cable entries Number of cable entries
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 9 6 4 3
C/D 2 2 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 164
67
Ø5
2
156
Note
The accessory sets contain the necessary mounting material. Necessary on use of 1 hinge per longitudinal side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] B.138
1420920000 – 2013/2014
Klippon® K - Aluminium enclosures
55 mm
42.3
Enclosures
Depth
48.5
Klippon® K 32
250
7.5*
C
D
B
F
E
68
80
19*
A
55
238
B
263*
52
238
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526900000
80 / 250 / 55 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529180000 1937810000
Standard (CR seal) Ex enclosure (silicone seal)
1565260000 9526900000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 1x38 1x32
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set Mounting plate Torx® screwdriver
35 mm width
Order No. 1910050000
Steel sheet, zinc plated
3073050000
Uninsulated Torx® TH20
9009160000
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about populating the enclosures with terminal blocks. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
Number of cable entries Number of cable entries
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 15 9 7 6
C/D 2 2 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 231
67
Ø5
2
239
Note
The accessory sets contain the necessary mounting material.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] 1420920000 – 2013/2014
B.139
Klippon® K - Aluminium enclosures
66
72 mm
55.5
Depth
Enclosures
Klippon® K 4
12*
130
C
D
B
F
E
68
82
A
B 98
72
68
116
143*
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526910000
82 / 130 / 72 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529190000 1937890000
Standard (CR seal) Ex enclosure (silicone seal)
0342300000 9526910000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical 1x5 1x4 1x3 1x2
horizontal * *
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set Mounting plate Hinge, diecast zinc, Set Torx® screwdriver
35 mm width
Order No. 1910060000
Steel sheet, zinc plated
3073060000
The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK range. We recommend BK 6 or BK 6 CRN (0625220000) for horizontal installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a horizontal position.
1580360000 Uninsulated Torx® TH20
9009160000
Number of cable entries Number of cable entries
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 5 3 2 2
C/D 2 2 1 1 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 116
Note
Sets also contain the mounting material, if required. 1 hinge per longitudinal side
68
54
2
Ø6
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] B.140
1420920000 – 2013/2014
Klippon® K - Aluminium enclosures
81 mm
63
Enclosures
Depth
72
Klippon® K 41
122
7.5*
C
D
F
E
104
120
14*
A
B 106
B
81
120
135* 122
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526920000
120 / 122 / 81 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529200000 1937800000
Standard (CR seal) Ex enclosure (silicone seal)
1565270000 9526920000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 1x13 1x11 1x8 1x6
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set Earth bar, Set Mounting plate Hinge, diecast zinc, Set
35 mm width
Order No. 1910070000
Steel sheet, zinc plated
3073070000 1580360000
External mounting feet, set of 4 Torx® screwdriver
9527590000 Uninsulated Torx® TH20
*Please refer to the Terminal Block Catalogue or the SAK Range for more information about populating the enclosures with terminal blocks. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no specified mounting options available for mounting the enclosure in a vertical position. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
Number of cable entries Number of cable entries
M12 M16 M20 M25 M32 M40 M50 M63
9009160000
Note
A/B 6 6 3 2 1
C/D 4 4 2 1 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 109
104
Ø7
2
Note
The accessory sets contain the necessary mounting material. Necessary on use of 1 hinge per longitudinal side.
95
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] 1420920000 – 2013/2014
B.141
Klippon® K - Aluminium enclosures
Depth
90 mm
83.5 73
Enclosures
Klippon® K 5
170 A
F
E
84
D
17*
130
B
C
B
7.5*
150
110
150
183*
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526930000
130 / 170 / 90 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529210000 1937860000
Standard (CR seal) Ex enclosure (silicone seal)
0342400000 9526930000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 1x20 1x16 1x12 1x10 1x8
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set
35 mm width
Earth bar, Set
9511220000
Mounting plate Hinge, diecast zinc, Set
Steel sheet, zinc plated
3073080000 1580360000
External mounting feet, set of 4 Torx® screwdriver
Order No. 1910080000
9529080000 Uninsulated Torx® TH20
The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK range. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no specified mounting options available for mounting the enclosure in a vertical position. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
Number of cable entries Number of cable entries
M12 M16 M20 M25 M32 M40 M50 M63
9009160000
Note
A/B 11 8 4 3 2
C/D 4 2 1 1 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 150
110
Ø6
2
138
Note
The accessory sets contain the necessary mounting material. Necessary on use of 1 hinge per longitudinal side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] B.142
1420920000 – 2013/2014
Klippon® K - Aluminium enclosures
81 mm
63
Enclosures
Depth
72
Klippon® K 51
220
7.5*
C
D
104
120
14*
A
E
B 204
F
B
81
82
233* 204
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526940000
120 / 220 / 81 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529220000 1937750000
Standard (CR seal) Ex enclosure (silicone seal)
1565280000 9526940000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 1x31 1x26 1x19 1x15
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set
35 mm width
Earth bar, Set
The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK range. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
Order No. 1910090000 9511210000
Mounting plate Hinge, diecast zinc, Set
Steel sheet, zinc plated
1580360000
External mounting feet, set of 4 Torx® screwdriver
3073090000
9527590000 Uninsulated Torx® TH20
Number of cable entries Number of cable entries
M12 M16 M20 M25 M32 M40 M50 M63
9009160000
Note
A/B 23 14 8 5 3 3
C/D 6 3 2 1 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 2
106
Ø7
207
193
Note
The accessory sets contain the necessary mounting material. Necessary on use of 2 hinges per longitudinal side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] 1420920000 – 2013/2014
B.143
Klippon® K - Aluminium enclosures
82
91 mm
73
Depth
Enclosures
Klippon® K 52
160
7.5*
160
B
C
D
140
19*
A
E
F
B 140
91
110
173* 140
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 526950000
160 / 160 / 91 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529230000 1937740000
Standard (CR seal) Ex enclosure (silicone seal)
1565290000 9526950000
Assembly with terminal
vertical * *
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
horizontal 1x18 1x15 1x11 1x9
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set
35 mm width
Earth bar, Set
Order No. 1910100000 9511220000
Mounting plate Hinge, diecast zinc, Set
Steel sheet, zinc plated
3073100000 1580360000
External mounting feet, set of 4 Torx® screwdriver
The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK range. We recommend BK 12 or BK 12 CRN (0625320000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
9527590000 Uninsulated Torx® TH20
Number of cable entries Number of cable entries
9009160000
Note
A/B 14 8 5 3 2 1
M12 M16 M20 M25 M32 M40 M50 M63
C/D 8 5 3 2 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 145 2
146
Ø7
130
Note
The accessory sets contain the necessary mounting material. Necessary on use of 1 hinge per longitudinal side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] B.144
1420920000 – 2013/2014
Klippon® K - Aluminium enclosures
100 mm
83
Enclosures
Depth
93.5
Klippon® K 6
200
100
C
E
F
B
17*
D
114
160
A
B 180
7.5*
140
180
213*
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526960000
160 / 200 / 100 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529240000 1937870000
Standard (CR seal) Ex enclosure (silicone seal)
0342500000 9526960000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 1x25 1x21 1x15 1x12 1x10
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set Earth bar, Set Mounting plate Hinge, diecast zinc, Set
35 mm width
Order No. 1910110000
Steel sheet, zinc plated
3073110000 1580360000
External mounting feet, set of 4 Torx® screwdriver
9529080000 Uninsulated Torx® TH20
The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK range. We recommend BK 12 or BK 12 CRN (0625320000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
Number of cable entries Number of cable entries
M12 M16 M20 M25 M32 M40 M50 M63
9009160000
Note
A/B 17 12 7 4 3 2
C/D 6 6 3 2 2 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 183
145
Ø6
2
Note
The accessory sets contain the necessary mounting material. Necessary on use of 2 hinges per longitudinal side.
162,5
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] 1420920000 – 2013/2014
B.145
Klippon® K - Aluminium enclosures
82
91 mm
73
Depth
Enclosures
Klippon® K 61
260
7.5*
C
B
D
E
140
160
19*
A
B
F
91
240
110
273* 240
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526970000
160 / 260 / 91 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529250000 1937730000
Standard (CR seal) Ex enclosure (silicone seal)
0573600000 9526970000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 1x38 1x32 1x24 1x19 1x16
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set
35 mm width
Earth bar, Set
Order No. 1910120000 9511230000
Mounting plate Hinge, diecast zinc, Set
Steel sheet, zinc plated
3073120000 1580360000
External mounting feet, set of 4 Torx® screwdriver
The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK range. We recommend BK 12 or BK 12 CRN (0625320000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
9527590000 Uninsulated Torx® TH20
Number of cable entries Number of cable entries
9009160000
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 27 23 13 8 4 3
C/D 8 6 3 2 1 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 245
145
Ø7
2
Note
The accessory sets contain the necessary mounting material. Necessary on use of 2 hinges per longitudinal side.
230
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] B.146
1420920000 – 2013/2014
Klippon® K - Aluminium enclosures
100 mm
Enclosures
83
Depth
93
Klippon® K 7
350 A
E
F
17*
160
D
114
350 C
B 330
7.5*
100
B
140
330
362.8*
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526980000
160 / 350 / 100 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529260000 1937880000
Standard (CR seal) Ex enclosure (silicone seal)
0342600000 9526980000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 1x55 1x46 1x34 1x27 1x23
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set Earth bar, Set Mounting plate Hinge, diecast zinc, Set
35 mm width
Order No. 1910130000
Steel sheet, zinc plated
3073130000 1580360000
External mounting feet, set of 4 Torx® screwdriver
9529080000 Uninsulated Torx® TH20
The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK range. We recommend BK 12 or BK 12 CRN (0625320000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
Number of cable entries Number of cable entries
9009160000
Note
M12 M16 M20 M25 M32 M40 M50 M63
A/B 42 26 17 10 6 5
C/D 8 6 3 2 2 1
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate 334
144
Ø6
2
314
Note
The accessory sets contain the necessary mounting material. Necessary on use of 2 hinges per longitudinal side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] 1420920000 – 2013/2014
B.147
Klippon® K - Aluminium enclosures
102
280
7.5*
111
B
C
D
210
A
230
19*
111 mm
93
Depth
Enclosures
Klippon® K 71
E
F
B 260 292.4*
180
260
Height/Width/Depth
Ordering data
Max. number of terminals (industry)
powder-coated (RAL 7001) unpainted
Note
XX* only for 9526990000
230 / 280 / 111 mm
Standard (CR seal) Standard (silicone seal)**
Order No. 9529270000 1937720000
Standard (CR seal) Ex enclosure (silicone seal)
0573700000 9526990000
Assembly with terminal
2.5 mm² 4 mm² 6 mm² 10 mm² 16 mm²
vertical * *
horizontal 2x42 2x35 2x26 2x21
The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.
Note
Accessories Terminal rail, Set
35 mm width
Earth bar, Set
Order No. 1910140000 9511190000
Mounting plate Hinge, diecast zinc, Set
Steel sheet, zinc plated
3073140000 1580360000
External mounting feet, set of 4 Torx® screwdriver
The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK range. We recommend BK 12 or BK 12 CRN (0625320000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.
9527590000 Uninsulated Torx® TH20
Number of cable entries Number of cable entries
9009160000
Note
A/B 42 30 21 12 10 4 3
M12 M16 M20 M25 M32 M40 M50 M63
C/D 28 18 10 8 3 2 2
**Our IP 68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate
Note
80
2
213
Ø7
264 250
The accessory sets contain the necessary mounting material. Necessary on use of 2 hinges per longitudinal side.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email:
[email protected] B.148
1420920000 – 2013/2014
