Transcript
Welcome to payleven
the easiest way to accept card payments! Greetings! In this package you will find your new Chip & PIN card reader and charging cable. Together with our free app, you are ready to start accepting payments!
On/off Bluetooth activ battery USB port Pairing Button (press the 0 key and hold for 5 sec. )
Confirmation
Cancel Back
Connecting the card reader to your Smartphone or Tablet Android
iOS 1. Turn on the card reader by pressing the
1. Turn on the card reader by pressing
small power button on the left side. While the
the small power button on the left side.
reader is booting up, activate Bluetooth on
While the reader is booting up, login to the
your smartphone / tablet through Settings >
payleven app on your smartphone and
Bluetooth > On
within the app, navigate to Payment > Account > Set Reader Type > Select
2. To pair the two devices, press the
“Chip card reader“. OR, if the device is
button 0 button for 5 seconds on the card
already set to “Chip card reader“, then
reader. After releasing the button, the
navigate to > Account > Manage Terminals.
words “You can connect” will appear on the card reader display.
2. To pair the two devices, press the “0“ button for 5 seconds on the card
3. Once a connection is found, the card
reader. After releasing the button, the
reader name will appear on your iPhone /iPad
words “You can connect” will appear on
as “Not Paired“. Click on the reader name and
the card reader display.
a window will appear asking you to confirm the connection. Click “pair” on the iPhone AND
3. Once a connection is found, confirm the
the green“confirm” button on the card reader.
pairing request by pressing “Pair“ (or „OK“)
Your iPhone will now say it is “connected“.
in the smartphone window AND the green
“confirm” button on the card reader. 4. Once paired, login to the payleven app
Pairing will begin.
and go on Account > card reader settings and choose the Chip & PIN card reader. You
4. Once complete, your smartphone will
are now ready to accept card payments!
be connected via Bluetooth to the Chip & PIN card reader and you will see the “enter payment screen“ on the payleven app. You are now ready to accept card payments!
Accept card payments in only 3 steps
2. Insert Card
1. Enter Amount Enter payment amount on the Smartphone / Tablet display and press “continue”.
When “Insert Card“ appears on the display of the card reader, insert the card into the bottom of the device.
3. Enter PIN When prompted, enter the PIN number and confirm the transaction by pressing the green “confirm” button or sign on the display of the smartphone / tablet. The PIN can be corrected by pressing the yellow “back” button or the transaction cancelled by pressing the red “cancel” button.
Once the transaction is complete, a confirmation message appears on both devices. You have the option to send a receipt to your customer by following the prompt after payment. Simply enter the customers email address.
Good to know Re-Pairing the Chip & PIN device to your smartphone / tablet You may need to Re-Pair your card reader and smartphone in three instances: • If data on your phone is manually cleared • If the app crashes • If you change your phone
Charging the reader
Sleep mode
You can charge the card reader by using the USB cable that came with your device. Simply connect it to your laptop or other USB power source. It takes approximately 45 minutes for the device to fully charge. The battery status is displayed on the reader screen.
To save energy, the card reader will automatically go into sleep mode after a couple minutes of inactivity. To reactivate the reader, simply press any button or insert a card.
What do I do if I have a problem? Look for an answer to your question on our Frequently Asked Question (FAQ) page: www.payleven.co.uk/FAQ You could not find a solution? Contact our customer service team. We are available from Monday to Friday from 09:00 to 18:00 Phone: +44 20 71 12 82 11 E-Mail:
[email protected]
