Preview only show first 10 pages with watermark. For full document please download

Welcome To The Sheridan College Fablab!

Rating
Date

September 2018
Size

2.2MB
Views

6,521
Categories

Computers & electronics Print & Scan 3D printers

Transcript

Welcome to the Sheridan College FabLab! sheridancollege.ca Located in the Centre for Advanced Manufacturing and Design Technologies, Room C131 sheridancollege.ca The FabLab is the locaBon of our state-‐of-‐the-‐art 3D, addiBve-‐ manufacturing technologies. sheridancollege.ca Fortus 900MC 3D Printer sheridancollege.ca Fortus 900MC 3D Printer Part Material: Flexible, fast, predictable, and simple to operate. Manufacture Real Parts™ in a wide range of thermoplas=cs. Build Speed: Mul=ple build speed op=ons for ﬁne feature detail and smoother surface ﬁnish. Max Part Size: 36" x 24" x 36" (914.4 x 609.6 x 914.4 mm) Layer Thickness: 0.013” (0.330 mm) 0.010” (0.254 mm) 0.007” (0.178 mm) File Formats: Accepts solid models in STL Accuracy: Parts are produced within an accuracy of +/-‐ .0035 inch or +/-‐.0015 inch per inch whichever is greater (+/-‐ .089 mm or +/-‐ . 0015 mm per mm, whichever is greater). Build Materials: ABS-‐M30, ABS-‐M30i, ABSi, ABS-‐ESD7, PC-‐ABS, PC, PC-‐ISO, ULTEM 9085, PPSF/PPSU Support Materials: Soluble Support -‐ ABS-‐M30, ABS -‐M30i, ABSi, ABS-‐ESD7, PC-‐ABS Break Away Support -‐ PC, PCISO, ULTEM 9085, PPSF/PPSU SoOware: All Fortus systems include Insight™ and Control Center™ job processing and management so_ware. Material Bay: 2 build material bays, 2 support material bays FDM Technology: FDM Technology build parts layer-‐by-‐layer by hea=ng thermoplas=c material to a semi-‐liquid state and extruding it according to computer controlled paths. FDM is a clean, simple-‐to-‐use, oﬃce-‐friendly 3D prin=ng process. Thermoplas=c parts can endure exposure to heat, chemicals, humid or dry environments, and mechanical stress. sheridancollege.ca Fortus 400MC 3D Printer sheridancollege.ca Fortus 400MC 3D Printer Part Material: Flexible, fast, predictable, and simple to operate. Manufacture Real Parts™ in a wide range of thermoplas=cs. Build Speed: Mul=ple build speed op=ons for ﬁne feature detail and smoother surface ﬁnish. Max Part Size: 36" x 24" x 36" (914.4 x 609.6 x 914.4 mm) Layer Thickness: 0.013” (0.330 mm) 0.010” (0.254 mm) 0.007” (0.178 mm) File Formats: Accepts solid models in STL Accuracy: Parts are produced within an accuracy of +/-‐ .0035 inch or +/-‐.0015 inch per inch whichever is greater (+/-‐ .089 mm or +/-‐ . 0015 mm per mm, whichever is greater). Build Materials: ABS-‐M30, ABS-‐M30i, ABSi, ABS-‐ESD7, PC-‐ABS, PC, PC-‐ISO, ULTEM 9085, PPSF/PPSU Support Materials: Soluble Support -‐ ABS-‐M30, ABS -‐M30i, ABSi, ABS-‐ESD7, PC-‐ABS Break Away Support -‐ PC, PCISO, ULTEM 9085, PPSF/PPSU SoOware: All Fortus systems include Insight™ and Control Center™ job processing and management so_ware. Material Bay: 2 build material bays, 2 support material bays FDM Technology: FDM Technology build parts layer-‐by-‐layer by hea=ng thermoplas=c material to a semi-‐liquid state and extruding it according to computer controlled paths. FDM is a clean, simple-‐to-‐use, oﬃce-‐friendly 3D prin=ng process. Thermoplas=c parts can endure exposure to heat, chemicals, humid or dry environments, and mechanical stress. sheridancollege.ca Fortus 250MC 3D Printer sheridancollege.ca Fortus 250MC 3D Printer Part Material: A produc=on-‐grade thermoplas=c durable enough to perform virtually the same as produc=on parts. WorkstaBon CompaBbility: Windows®XP/Windows Vista® Max Part Size: 10" x 10" x 12" (254 x 254 x 305 mm) Layer Thickness: 0.013” (0.330 mm) 0.010” (0.254 mm) File Formats: Accepts solid models in STL EvaluaBon & Durability: Models can be used in physical tes=ng and have a higher level of accuracy to actually ﬁt together Build Materials: ABS plus in ivory, white, black, red, olive green, nectarine, ﬂuorescent yellow, blue or gray Support Materials: Soluble support technology (SST) or Breakaway support technology (BST) SoOware: All Fortus systems include Insight™ and Control Center™ job processing and management so_ware. Material Bay: 1 build material bays 1 support material bays FDM Technology: FDM Technology build parts layerby-‐ layer by hea=ng thermoplas=c material to a semi-‐liquid state and extruding it according to computercontrolled paths. FDM is a clean, simple-‐to-‐use, oﬃce-‐friendly 3D prin=ng process. Thermoplas=c parts can endure exposure to heat, chemicals, humid or dry environments, and mechanical stress. sheridancollege.ca Stratasys uPrint SE Plus 3D Printer sheridancollege.ca Stratasys uPrint SE Plus3D Printer Model Material: ABS plus in ivory, white, blue, ﬂuorescent yellow, black, red, nectarine, olive green, gray Build Size: 203 x 203 x 152 mm (8 x 8 x 6 in) Layer Thickness: 0.254 mm (.010 in) or 0.330 mm (.013 in) WorkstaBon CompaBbility: Windows ® 7 Network ConnecBvity: Ethernet TCP/IP 10/100 base T Size and Weight: 635 (w) x 660 (d) x 940 (h) mm (25 x 26 x 37 in) 94 k (206 lbs) Basket size: 203 x 203 x 152 mm (8 x 8 x 6 in) Power Requirements: 100–127 VAC 50/60 Hz, minimum 15A dedicated circuit or 220–240 VAC 50/60 Hz, minimum 7A dedicated circuit Regulatory Compliance: CE / TUV / RoHS / WEEE sheridancollege.ca CleanStaBon SRS II Cleaning StaBon sheridancollege.ca CleanStaBon SRS II Cleaning StaBon Features: •  Circula=on: 167% per minute •  16”x 14”x 16”work envelope •  3584 cubic inch, 17 gallon, stainless steel tank •  Quick-‐disconnect, appliance style plumbing •  Integrated rinse sink and faucet •  Single phase 240v, 20 amp service •  “Single touch” automated control •  Rolls on locking casters •  Programmable for =me and temperature •  High eﬃciency single point manifold •  3000 wal heater, 1 hour warm up •  Hinged and locking tank lid, hinged basket lid •  Recessed “no-‐drip” top sheridancollege.ca Stratasys Finishing Touch Smoothing StaBon sheridancollege.ca Stratasys Finishing Touch Smoothing StaBon Chamber Size: 330 x 406 x 508 mm (13 x 16 x 20 in.) System Size/Weight: Crated 1511.3 x 1092 x 1485.89 mm (59.5 x 43 x 58.5 in.)/≈272.16 kg (≈600 lbs.); uncrated: 1333.5 x 812.8 x 1168.39 mm (52.5 x 32 x 46 in.)/182 kg (400 lbs.) Operator A[endance: Intermilent to expose parts OperaBng Environment: Good ven=la=on Maximum Room Temperature: 29.4 C (85 F); humidity < 65% noncondensing Maximum AlBtude: 3280 meters (10761 feet) Power Requirements: 200-‐240 VAC, 50/60 Hz, 20 amp (dedicated circuit), single phase AddiBonal Requirements: 102 mm (4 in) exhaust to outside Compressed Air: Minimum of 5 CFM @ 80 psi Safety Standards: CE cer=ﬁed sheridancollege.ca Stratasys OBJET 30 Pro 3D Printer sheridancollege.ca Parts printed on the Stratasys OBJET 30 Pro. sheridancollege.ca Stratasys OBJET 30 Pro 3D Printer Model Materials: VeroWhitePlus™, VeroBlackPlus™, VeroGray™, VeroBlue™, VeroClear™; Endur™ and Durus™ High Temperature Support Material: SUP705 gel-‐like photopolymer support Maximum Build Size: (XYZ) 294 x 192 x 148.6 mm (11.57 x 7.55 x 5.85 in.) System Size and Weight: 82.6 x 60 x 62 cm (32.5 x 23.6 x 24.4 in.); 106 kg (234 lbs.) ResoluBon: X-‐axis: 600 dpi; Y-‐axis: 600 dpi; Z-‐axis: 900 dpi Accuracy: 0.1 mm (0.0039 in.) varies depending on part geometry, size, orienta=on, material and post-‐processing method Minimum Layer Thickness: 28 microns (0.0011 in.); 16 microns for VeroClear material (.0006 in.) Build Modes: High quality: 16-‐micron (.0006 in.) resolu=on High speed: 30-‐micron (.001 in.) resolu=on SoOware: Objet Studio™ intui=ve 3D prin=ng so_ware WorkstaBon CompaBbility: Windows ® XP/Windows ® 7/Windows ® 8 Network ConnecBvity: Ethernet TCP/IP 10/100 base T OperaBng CondiBons: Temperature 18-‐25°C (64-‐77°F); rela=ve humidity 30-‐70% Power Requirements: Single phase: 100-‐120V; 50-‐60Hz; 7A or 200-‐240V; 50-‐60Hz 3.5A Regulatory Compliance: CE, FCC/RoHS sheridancollege.ca Stratasys OBJET 30 Prime 3D Printer sheridancollege.ca Stratasys OBJET 30 Prime 3D Printer Model Materials: Rigid Opaque (VeroWhitePlus™, VeroGray™, VeroBlue™, VeroBlackPlus™), Transparent (RGD720 and VeroClear™), Simulated Polypropylene (Endur™ and Durus™), High Temperature, Rubber-‐like (TangoGray™ and TangoBlack™), Bio-‐compa=ble. Support Material: FullCure705 gel-‐like photopolymer support Maximum Build Size: (XYZ) 294 x 192 x 148.6 mm (11.57 x 7.55 x 5.85 in.) System Size and Weight: 82.5 × 62 × 59 cm (32.28 × 24.4 × 23.22 in.); 106 kg (234 lbs) ResoluBon: X-‐axis: 600 dpi; Y-‐axis: 600 dpi; Z-‐axis: 1600 dpi Accuracy: 0.1 mm (0.0039 in.) varies depending on part geometry, size, orienta=on, material and post-‐processing method Minimum Layer Thickness: 28 microns (0.0011 in.); 16 microns for VeroClear material (.0006 in.) Build Modes: Dra_ (36 micron); High Speed (28 micron); High Quality (16 micron) SoOware: Objet Studio™ intui=ve 3D prin=ng so_ware WorkstaBon CompaBbility: Windows ® XP/Windows ® 7/Windows ® 8 Network ConnecBvity: Ethernet TCP/IP 10/100 base T OperaBng CondiBons: Temperature 18-‐25°C (64-‐77°F); rela=ve humidity 30-‐70% Power Requirements: Single phase: 100-‐120V; 50-‐60Hz; 7A or 200-‐240V; 50-‐60Hz 3.5A Regulatory Compliance: CE, FCC/RoHS sheridancollege.ca Cleaning StaBon for Stratasys OBJET 30 Pro and OBJET 30 Prime 3D Printers sheridancollege.ca Solidscape 3Z Max 3D Printer sheridancollege.ca Solidscape 3Z Max 3D Printer ResoluBon: 5000 X 5000 dpi (197 X 197 dots/mm) in X, Y; 8000 dpi (158 dots/mm) in Z Accuracy: ± 0.0010 inch/inch (±25.4µ/25.4mm) along each axis X, Y and Z Layer Thickness: User selectable through variable slider Surface Finish: 32-‐63 micro-‐inches (RMS) OFFICE ENVIRONMENT Desk-‐top Size and Weight: 1.4” W X 18”D X 16” H (558 X 495 X 419 mm); 75 lbs. weight (34 kg) Build Envelope: 6” X 6” X 4” (152.4 X 152.4 X 101.6 mm) X, Y, Z. Consistent Results over en=re area Power Requirements: 90-‐250-‐v, 10A @ 230v max consump=on Ambient OperaBng Temperature: Recommend 60° to 80° F (16° to 27° C) at a 40% to 60% range of humidity Equipment Interface: PC to printer connec=vity Wireless Wi-‐Fi 802.11 b/g, Ethernet Hi-‐Speed USB 2.0 Materials: 3Z®Model Model material formulated for clean burnout to produce 100% cas=ng results. 3Z®Support Sacriﬁcial support material is generated automa=cally for each job, and later dissolved away for a labor-‐saving, hands-‐free opera=on. DeWax Liquid solu=on used to dissolve sacriﬁcial support material CAD File Input: .stl and .slc ﬁles; 3Z®Works So_ware formats CAD ﬁles for 3D prin=ng; 3Z®Touch System So_ware is Windows® based SCP® Smooth Curvature Prin=ng for superior surface ﬁnish Agency Compliance: CE cer=ﬁed; FCC Class A approved TUV approved (EN 60950 Compliant) sheridancollege.ca MakerBot Replicator 5th Gen. 3D Printer (16 Printers) sheridancollege.ca MakerBot Replicator 5th Gen. 3D Printer (16 Printers) sheridancollege.ca MakerBot Replicator – 5th GeneraBon 3D Printer Print Technology: Fused Deposi=on Modeling Build Volume: 25.2 L x 19.9 W x 15.0 H cm [9.9 x 7.8 x 5.9 in] 7,522 cubic cen=meters [456 cubic inches] Layer ResoluBon: 100 microns [0.0039 in] Filament: Diameter 1.75 mm [0.069 in]; Compa=bility MakerBot PLA Filament Large Spool 0.9 KG [2.0 lb] Nozzle Diameter: 0.4 mm [0.015 in] Print File Type: .makerbot Product Dimensions 52.8 L x 44.1 W x 41.0 H [20.8 x 17.4 x 16.2 in] Product Weight: 16 kg [35.3 lbs] ConstrucBon: PC ABS with Powder-‐Coated Steel Reinforcement Build Surface: Glass with Blue Tape Stepper Motors: 1.8° Step Angle with 1/16 Micro-‐Stepping PosiBoning: XY Posi=oning Precision 11 Microns [0.0004 in]; Z Posi=oning Precision 2.5 Microns [0.0001 in] Power Requirements: 100–240V, 50–60 Hz 0.76-‐0.43 A, 100 W ConnecBvity: USB, Ethernet, Wi-‐Fi Camera ResoluBon: 320 x 240 sheridancollege.ca MakerBot Replicator 2 3D Printer (5 Printers) sheridancollege.ca MakerBot Replicator 2 3D Printer Print Technology: Fused Filament Fabrica=on Build Volume: 11.2 L x 6.0 W x 6.1 H in [28.5 x 15.3 x 15.5 cm] Layer ResoluBon: High 100 microns [0.0039 in], Medium 270 microns [0.0106 in], Low 340 microns [0.0133 in] PosiBoning Precision: XY: 11 microns [0.0004 in]; Z: 2.5 microns [0.0001 in] Filament Diameter: 1.75 mm [0.069 in] Nozzle Diameter: 0.4 mm [0.015 in] SoOware Bundle: MakerBot MakerWare ™ Bundle 1.0 File Types: .stl, .obj, .thing Supports: Windows (XP/7), Linux (Ubuntu 10.04+), Mac OS X (10.7/10.8) Physical Dimensions: Without Spool: 19.1 x 12.8 x 14.7 in [49 x 32 x 38 cm] With Spool: 19.1 x 16.5 x 14.7 in [49 x 42 x 38 cm] Weight: 25.4 lbs [11.5 kg] Temperature: Ambient Opera=ng 15° – 32° C [60° – 90° F] AC Input: 100 – 240 V, ~ 2 amps, 50 – 60 Hz Power Requirements: 24 V DC @ 6.25 amps Connec=vity: USB, SD card [included] Stepper Motors: 1.8° step angle with 1/16 micro-‐stepping sheridancollege.ca MakerBot 3D Printers For Student Use sheridancollege.ca MakerBot 3D Printers For Student Use sheridancollege.ca DFPCN Rostock Mini Pro Delta 3D Printer (Prototype) sheridancollege.ca DFPCN Rostock Mini Pro 3D Printer Model: Parallel arm structure (Delta） PrinBng Size: 80mm Dia. x 160mm Height Filament: 1.75mm PLA/ABS PrinBng Nozzle: 0.4mm Firmware: Repe=er Recommended Control SoOware: Repe=er-‐Host Height: 495mm Package Size: 52cm x 29cm x 23cm Gross Weight: 6.5kg sheridancollege.ca 3D Printer Sample Parts sheridancollege.ca Student Engineering Project UBlizing 3D-‐Printed Parts sheridancollege.ca Z CorporaBon Spectrum Z510 Full Colour 3D Printer sheridancollege.ca Z CorporaBon Z510 Full Colour 3D Printer File Formats: STL, VRML PLY, and 3DS Wall Thickness: An absolute minimum wall thickness of 1/16” (~1.5mm) is recommended. Build Speed: 2 layers per minute Max Part Size: 10" x 14" x 8“ (254 x 356 x 203 mm) Layer Thickness: User selectable at the =me of prin=ng; 0.0035"-‐0.008" (.089-‐.203 mm) Print ResoluBon: 600 x 540 dpi Dedicated Power Outlet Requirements: 100-‐120 VAC, 50-‐60Hz, 15A max -‐or-‐ 220-‐240 VAC, 50/60Hz, 7A max Network: Ethernet 10/100 base T Temperature: 68-‐85°F. (20-‐30° C) RelaBve Humidity: 20-‐60%, non-‐condensed Weight: 470 lbs. (210 kg) Dimensions: Cover closed 42” x 31.25” x 50.5” (107cm x 79cm x 128cm), Cover open 42” x 31.25” x 73” (107cm x 79cm x 185cm) sheridancollege.ca Z CorporaBon ZD5 Powder Recycling StaBon sheridancollege.ca xlaFORM Automated Infuser sheridancollege.ca xlaFORM Automated Infuser FuncBon: This automated vacuum infuser takes advantage of the porosity of certain types of 3D printed parts by ﬁlling otherwise empty space with xlaForm resins. To infuse the part en=rely, the xlaForm Automated Infuser u=lizes a pressure diﬀeren=al to ﬁll the voids inside of the parts with xlaForm resins. The air trapped inside of the 3D printed part leaves the part in the form of enlarged bubbles and the xlaForm resin takes its place. When the vacuum is released, the resin is forced into the voids by normal air pressure. Power Requirements: 120V AC power source able to supply 20 amps Air Source: 50 psi User Interface: Touch screen Temperature Range: The user input range for resin tank temperatures is 40°C to 60°C to avoid damage or injury. Chamber Heater: Keeps the infusion chamber at 60°C so that the 3D printed parts are prevented from cooling to room temperature before an infusion cycle. sheridancollege.ca Blue M Mechanical UBlity Oven sheridancollege.ca Blue M Mechanical UBlity Oven Features: •  Controlled temperatures •  Mechanical convec=on •  Horizontal air ﬂow Power Requirements: 120V AC sheridancollege.ca David SLS-‐2 Structured Light Scanner sheridancollege.ca David SLS-‐2 Structured Light Scanner DescripBon: Employs the innova=ve Structured Light technology, which allows precise 3D scanning in a maler of seconds. Scan Size: 60-‐500 mm ResoluBon/Precision: Up to 0,1% of scan size (down to 0,06 mm) Scanning Time: One single scan within a few seconds Mesh Density: Up to 1,200,000 ver=ces per scan Export Formats: OBJ, STL, PLY Computer Requirements: Standard PC (Windows XP, Vista, 7 or 8 -‐ 32 or 64 bit), two available USB ports Recommended: Dual core 2 GHz CPU, 64 bit Windows, 8 GB system memory, 3d graphics card (e.g. NVIDIA GeForce or ATI Radeon) with 1 GB RAM or more Export File Formats: OBJ, STL, PLY Major Contents: Industrial camera with high quality lens, video projector with special lens for large focal range, including remote control, USB drive with DAVID Pro Edi=on 4 so_ware. sheridancollege.ca Creaform Handyscan EXAscan Portable 3D Scanner sheridancollege.ca Creaform Handyscan EXAscan Portable 3D Scanner The EXAscan laser scanner is the perfect inspec=on tool for analyzing and repor=ng Geometric Dimensioning and Tolerancing (GD&T). The direct .stl ﬁles generated can easily be imported into inspec=on so_ware and quickly processed. Weight: 1.25 kg (2.75 lbs) Dimensions: 172 x 260 x 216 mm (6.75 x 10.2 x 8.5 in) Measurement: 25,000 measures/s Laser Class: II (eye-‐safe) ResoluBon in X, Y, Z axis: 0,05 mm (0.002 in) Accuracy: Up to 40 μm (0.0016 in) ISO (Volumetric Accuracy): 20 μm + 100 μm/m Depth of ﬁeld: 30 cm (12 in) Output formats: .dae, .ƒx, .ma, .obj, .ply, .stl, .txt, .wrl, .x3d,.x3dz, .zpr CompaBble SoOware: CATIA V5: HSM, Geomagic, PolyWorks, Rapidform, μLog XG, Metrolog XG and Metrolog V5 sheridancollege.ca Creaform Handyscan REVscan Portable 3D Scanner sheridancollege.ca Creaform Handyscan Revscan Portable 3D Scanner Weight: 980 g (2.1 lbs.) Dimensions: 160 x 260 x 210 mm (6.25 x 10.2 x 8.2 in.) Measurement Rate: 18,000 measures/s Laser Class: II (eye-‐safe) ResoluBon: 0.100 mm (0.004 in.) Accuracy: Up to 0.050 mm (0.002 in.) Volumetric Accuracy: 0.020 mm + 0.200 mm/m (0.0008 in. + 0.0024 in./_) Stand-‐Oﬀ Distance: 300 mm (12 in.) Depth of Field: ± 150 mm (±6 in.) Laser Cross Area: 210 mm x 210 mm (8.2 x 8.2 in.) Output Formats: .dae, .ƒx, .ma, .obj, .ply, .stl, .txt, .wrl, .x3d, .x3dz, .zpr CompaBble SoOware: Geomagic (Studio and Qualify), Rapidform (XOS, XOR and XOV), InnovMetric So_ware (PolyWorks), Dassault (CATIA V5, SolidWorks), PTC (Pro/ENGINEER), Siemens (NX and Solid Edge), Autodesk (Inventor, Alias, 3ds, Max, Maya, So_image) sheridancollege.ca AB PlasBc Injectors AB-‐400 InjecBon Molding Machine sheridancollege.ca AB PlasBc Injectors AB-‐400 InjecBon Molding Machine Shot Capacity: 1/4oz (7gr) 1/3oz (10gr) 1/2oz (14gr) InjecBon Pressure @ 125PSI: 6333 4243 3568 @125PSI With 2 Stage Cylinder: 12228 8209 6903 Voltage Required: 120V 50/60Hz, 220V Op=onal Daylight Between Mold Opening: 2 1/4" Heat Capacity: 600 Wals Cycle Time: 5-‐99 secs Heat Capacity Nozzle OpBonal: 100 Wals Nozzle Oriﬁce: 0.093" Temperature Range: 100° F -‐ 600° F Hopper Capacity 30 oz (840gr) Mold Height: 3" Machine Dimensions 28" X 21" X 61" Sprue Center Line: 1" Machine Weight 200lbs (91Kg) sheridancollege.ca Formech 686 Vacuum Former sheridancollege.ca Formech 686 Vacuum Former Features: Material Size: 686x660mm / 27x26" • Heater travel -‐ bearing wheels Forming Area: 646x620mm / 25.5x24.5" • PLC touch screen control Max. Depth of Draw: 325mm / 12.8" • 20 program memories Max. Material Thickness: 6mm / .25" • Vacuum gauge Overall Width: 940mm / 37" • Pre-‐stretch Overall Height: 1280mm / 50.4" • Autolevel Overall Depth: 1900mm / 74.8" • Pneuma=c power table Weight: 260kg / 573lbs • BECKER rotary vane pump : 26’’ Hg -‐ 16m3/HR Electrical SpeciﬁcaBons: 208-‐240V, 40A, 8kW, Single Phase OR 380-‐415V, 32A, 8kW, 3 Phase *The 686 requires compressed air sheridancollege.ca Lucas Centrifugal CasBng Machine sheridancollege.ca Lucas Centrifugal CasBng Machine Will accommodate ﬂasks up to 3-‐1/2" in diameter, 5-‐1/2" high. The long 22" arm provides the extra force needed for heavier casts. Lucas' unique Ball Winding Knob is a very useful feature. Provided with balance weights, cradle for ﬂasks, and accessories. Dimensions: 23"L x 7"W x 10"H. Arm: 22” Accessories: •  2-‐1/2" X 2" dia. Flask •  3-‐1/2" x 2-‐1/2" Flask •  3-‐1/2" x 5" Flask •  7 oz. Crucible •  Flask Tongs •  Universal Sprue Base •  Heat Resistant Gloves sheridancollege.ca Trotec Speedy 400 Laser Cu[er and Engraver sheridancollege.ca Trotec Speedy 400 Laser Cu[er and Engraver Overall Dimensions (WxDxH): 1400 x 950 x 1070 mm Working Area: 1000mm x 610mm Max. height of the workpiece: 305mm Max. engraving speed: 355 cm/s, accelera=on 5g Accuracy: Addressable accuracy: 5μm, sta=c repeat accuracy: < ±15μm Mechanical design: Fully enclosed chassis with double safety interlock system laser safety class 2, CE compliant maintenance-‐free, brushless DC servo motors, InPack-‐Technology Laser Design: Sealed-‐Oﬀ CO2 laser from 40-‐120 wals Weight: approx. 300kg (depending on laser power) JobControl® Expert SoOware: Supports you perfectly in handling your engraving jobs. JobControl® lets you u=lize your computer’s performance allowing access to the many useful and intelligent func=ons that make your work easier. Honeycomb Table: The solid honeycomb structure minimizes beam back reﬂec=on and yields perfect cuˆng results. sheridancollege.ca Trotec Speedy 300 Laser Cu[er and Engraver sheridancollege.ca Trotec Speedy 300 Laser Cu[er and Engraver Overall Dimensions (WxDxH): 1090 mm x 890 mm x 590 mm Working Area: 726 mm x 432 mm Max. height of the workpiece: 200 mm Max. engraving speed: 355 cm/s, accelera=on 5g Accuracy: Addressable accuracy: 5μm, sta=c repeat accuracy: < ±15μm Mechanical design: Fully enclosed chassis with double safety interlock system laser safety class 2, CE compliant maintenance-‐free, brushless DC servo motors, InPack-‐Technology Laser Design: Sealed-‐Oﬀ CO2 laser from 12-‐120 wals Weight: approx. 135 kg (30 wal model) JobControl® Expert SoOware: Supports you perfectly in handling your engraving jobs. JobControl® lets you u=lize your computer’s performance allowing access to the many useful and intelligent func=ons that make your work easier. Honeycomb Table: The solid honeycomb structure minimizes beam back reﬂec=on and yields perfect cuˆng results. sheridancollege.ca Flow Mach 2C Water Jet Cu[er sheridancollege.ca Flow Mach 2C Water Jet Cu[er Special Features: Robust, Gantry style construc=on oﬀering fast cuˆng /traverse speeds. Convenient roll-‐around touchscreen control with tool chest drawers. FlowMaster control so_ware. Full geometric nes=ng with FlowNEST. PASER 4 abrasive cuˆng system. Work envelope: 2 m x 2 m [6.5 _ x 6.5 _] Accuracy: (+/-‐) .127 mm [0.005 in (full envelope)] Repeatability: (+/-‐) +/-‐ 0.050 mm [+/-‐ 0.002 in] Speed Range: Up to 20 m/min [Up to 800 ipm cut & traverse speeds] Z VerBcal Travel: 152 mm [6 in] Dynamic Waterjet: Using our SmartStream™ technology, Dynamic Waterjet not only counters stream lag and taper (characteris=cs inherent to waterjet), but also automa=cally =lts and monitors the speed of your cuˆng head on the ﬂy. This ensures the part you pick up oﬀ the table is cut as quickly as possible, and to high precision. Rigid ConstrucBon: Designed using Finite Element Analysis (FEA), and thermally stress relieved steel, handles high produc=on needs with ease. System ProtecBon: Full wrap around bellows on the drive system ensures long component life, and highly accurate cut parts. Roll-‐Around Control: The roll-‐around control allows you to move freely and the touch screen provides an easy interface. FlowMaster® Control SoOware: Easy to use so_ware package ﬁlled with powerful features. sheridancollege.ca Tormach 1100 CNC Milling Machine (2 Machines) sheridancollege.ca Tormach 1100 CNC Milling Machine Table Size: 34" x 9.5“ Table Slots: 3 Slots 5/8“ Travel: Spindle Nose Diameter: 3 3/8" Spindle Nose to Table: 17" maximum Spindle Center to Column: 11“ Shipping Dimensions: 56" x 45" x 60“ Max Workpiece: 500 lbs. Maximum 18" x 9.5" x 16.25" (X,Y,Z) Weight: 1130 lbs. net/1296 lbs. gross Power Requirements: 230-‐250 VAC 50/60 Hz single phase (primary). 20A breaker recommended. 115 VAC 50/60Hz (secondary). Frame and Table: Cast iron frame and table, with hand scraped hydrodynamic ways and tapered adjustment gibs. Way Surfaces: Low fric=on PTFE-‐ﬁlled Acetyl bonded sliding surface. Similar to Rulon® and Turcite®. Spindle: 100 to 5140 RPM. Cartridge with spindle lock construc=on. R8 taper. 1.5 hp. Brushless AC 3-‐phase induc=on motor. V-‐belt brive, 2 ra=o. Spindle Drive: Emerson Control Techniques™ Sensorless Vector Technology with Fold-‐back logic. 1100W con=nuous, 2800W peak. Feed Rate: 110 IPM (X,Y), 90 IPM (Z) Axis Drives: High Performance Polyphase Stepper Motors with Leadshine® Microstepping Drivers. sheridancollege.ca Tormach 770 CNC Milling Machine (2 Machines) sheridancollege.ca Tormach 770 CNC Milling Machine Table Size: 26" x 8“ Table Slots: 3 Slots 5/8“ Travel: 14" x 7.5" x 13.25" (X,Y,Z) Spindle Nose to Table: 14.8" maximum Spindle Center to Column: 8 5/8“ Spindle Nose Diameter: 3 3/8" Shipping Dimensions: 42" x 45" x 49“ Max Workpiece: 400 lbs. Maximum Weight: 662lbs. net/800 lbs. gross Power Requirements: 115 VAC 50/60 Hz single phase (primary). 20A breaker recommended. Frame and Table: Cast iron frame and table, with hand scraped hydrodynamic ways and tapered adjustment gibs. Way Surfaces: Low fric=on PTFE-‐ﬁlled Acetyl bonded sliding surface. Similar to Rulon® and Turcite®. Spindle: 175 to 10,000 RPM. Cartridge with spindle lock construc=on. R8 taper. 1.5 hp. Brushless AC 3-‐phase induc=on motor. Getes Polyﬂex V-‐belt brive, 2 ra=o. Spindle Drive: Emerson Control Techniques™ Sensorless Vector Technology with Fold-‐back logic. 750W con=nuous, 1300W peak. Feed Rate: 135 IPM (X,Y), 110 IPM (Z) Axis Drives: High Performance Polyphase Stepper Motors with Leadshine® Microstepping Drivers. sheridancollege.ca Morton FEL-‐1440 HG ConvenBonal Lathe (6 Machines) sheridancollege.ca Morton FEL-‐1440 HG ConvenBonal Lathe Height of Centers: 180mm Length of Bed / Width of carriage: 513mm / 412mm Swing over Bed: 360mm Cross Slide Travel: 220mm Swing in Gap: 533mm Top Slide Travel: 140mm Swing Over Cross Slide: 214mm Tailstock: Distance Between Centers: 1000mm / 1500mm •  Quill diameter: Ø52mm (2.047") Width of Bed: 260mm •  Quill travel: 152mm (6") Gap Width in Front of Faceplate: 135mm •  Taper of center: MT. No.4 Spindle Nose, Internal Taper: D1-‐6, MT. No.6 Motor: Spindle Center Sleeve: MT. No.6 x MT. No.4 •  Main spindle: HG -‐ 3.75Kw (5HP) Spindle Bore: Ø52.5mm •  Coolant pump: 1/8HP Spindle Speed: 70 -‐ 1800 RPM sheridancollege.ca Maximart 2VS VerBcal Milling Machine (6 Machines) sheridancollege.ca Maximart 2VS VerBcal Milling Machine Motor and Spindle: •  Motor: 3 HP •  Spindle Speeds/R.P.M (50hz): 70-‐2310-‐8S/70-‐4620-‐16S/ 50-‐3550-‐VARIABLE •  Spindle Speeds/R.P.M (60hz): 90-‐2800-‐8S/90-‐5600-‐16S/ 60-‐4300-‐VARIABLE •  Spindle Taper: R8 or ISO 30 •  Spindle Travel: 127 •  Quill Feed/Spindle Rev: 0.04, 0.08, 0.15mm/rev •  Quill Diameter: 85.7MM ConstrucBon: All meehanite cast iron machine body. •  Column turret diameter: 380 mm •  Knee width: 300 mm •  Column bearing length: 430 mm •  Saddle/table bearing length: 505 mm •  Ram/turret bearing length: 400 mm •  Ram length: 620 mm •  New weight: 950 kg sheridancollege.ca Mitutoyo Crysta Apex C 7106 Coordinate Measuring Machine sheridancollege.ca Mitutoyo Crysta Apex C 7106 CoorBnate Measuring Machine Accuracy: MPEE = (1.7+3L/1000)μm Measuring Range (X,Y,Z): 705 mm x 1005 mm x 605 mm 27.75” x 39.56” x 23.81” ResoluBon: 0.0001 mm (0.000004”) Maximum CNC Drive Speed: 520mm/s (20.47"/s) Maximum Measuring Speed: 8mm/s JoysBck Moving Speed: 0 – 80mm/s JoysBck Measuring Speed: 0 – 3mm/s Maximum AcceleraBon: 0.23G (3D) Machine weight: 4293lbs. (1951kg) Air ConsumpBon: 60L/min or 2.16CFM (under normal condi=ons) Workpiece (Max. Height, Max. Weight): 31.49" (800mm), 2200lbs. (1000kg) Dimensions (W x D x H): 1470 mm x 1950 mm x 2730 mm (57.87” x 76.77” x 107.48”) Air Pressure: 0.4Mpa (4kgf/cm2) or 58 PSI MCOSMOS CMM SoOware System: •  General purpose program •  Oﬀ-‐line teaching program •  3-‐D surface analysis program •  Proﬁle data analysis program •  Gear analysis program •  Sta=s=cal data processing prog. •  Data conversion program sheridancollege.ca Creaform C-‐Track 780 Dual Camera Sensor sheridancollege.ca Creaform C-‐Track 780 Dual Camera Sensor Special Features: •  Filed with high quality op=cs and special ligh=ng, enabling it to measure all reﬂectors within its opera=ng space. •  Ensures the exact localiza=on of the HandyPROBE Performs: •  Con=nuous image acquisi=on and transmission •  Ligh=ng of reﬂectors •  Wireless communica=on with the HandyPROBE stylus •  Management of the exchanges with the computer •  Storage of the sensor parameters Weight: 5.5 kg (12 lbs) Dimensions: 1089 x 174 x 119 mm (43 x 6.9 x 4.7 in) Single Point Performance: 55 μm (0.0022 in) Volumetric Performance: 85 μm (0.0033 in) Measurement Speed: 30 points/s OperaBng Temperature Range: 15-‐40 °C (59-‐104 °F) Universal Power Supply: 100-‐240 VAC/50-‐60Hz OperaBng Humidity Range (Non-‐Condensing): 10-‐90% CerBﬁcaBons: EN 301 489-‐1, EN 301 489-‐3, EN 300 220-‐1 sheridancollege.ca ABB Robots RoboBcs Training Lab sheridancollege.ca ABB Robot RoboBcs Training Lab sheridancollege.ca For more informaBon contact: Farzad Rayegani, Ph.D., P.Eng. Fellow of Engineers Canada Associate Dean, Professor, School of Mechanical and Electrical Engineering & Technology Director, Centre for Advanced Manufacturing and Design Technologies (CAMDT) ASME Chair, Addi=ve Manufacturing Brampton | Mississauga | Oakville 7899 McLaughlin Rd., Brampton, ON, L6Y 5H9, CANADA Tel: 905-‐459-‐7533, ext.: 5077, Cell: 416-‐807-‐5408 sheridancollege.ca [email protected] sheridancollege.ca

Welcome To The Sheridan College Fablab!

Rating

Date

Size

Views

Categories

Share

Transcript

Forgot your password?.