Transcript
Distributed by:
www.Jameco.com ✦ 1-800-831-4242 The content and copyrights of the attached material are the property of its owner.
Jameco Part Number 684705
Heats instantly. Cools quickly. Introducing the Weller® Pro Cordless Soldering Tool. Using the patented ColdHeat™ system, the Weller Pro Cordless melts solder instantly and is cool to the touch in just seconds. But unlike most other products using this new technology, the Weller Pro Cordless has the punch industrial professionals need to tin wire as large as 12 gauge or join wire from 18-25 gauge. With an average yield of 700 solder joints per pack of five AA alkaline batteries, it has what it takes to be an invaluable tool anywhere field soldering is required. The Weller Pro Cordless Soldering Tool… it’s a 21st century industrial revolution!
Rugged polycarbonate body High/Low/Off power switch Bright white LED work light Storage case included
CHT1 Bevel Tip 50˚ angle
Red “In Use” indicator light
CHT2 Conical Tip 61˚ angle
How it Works The Weller Pro Cordless Soldering Tool’s ability to heat instantly and cool quickly begins with the unique ColdHeat tip design, which uses two electrically insulated electrodes made of patented Athalite™ material to form part of an internal electrical circuit. Unlike regular soldering irons, the Weller Pro Cordless Soldering Tool does not require pre-heating the tip. When the tip’s two electrodes make simultaneous contact with an electrically conductive material (such as a wire lead, terminal, solder, or other material), the circuit is completed. The electrodes generate nearly instantaneous heat in the work piece, melting the solder and making the joint.
CHT3 Chisel Tip 61˚ angle (included with CHT100)
Catalog Number CHT100
Description Weller® Pro Soldering Tool; Includes CHT3 Chisel Tip, Protective Cap, and Polycarbonate Storage Case
CHT1
Weller® Soldering Tip, Bevel; Sharp end for working on electronic components, printed circuit boards, and fine wiring (21-25 gauge). Flat face can be used where more heat transfer is needed: electrical components, small metal pieces, and larger wiring (18-20 gauge).
CHT2
Weller® Soldering Tip, Conical; Ideal for working on electronic components, printed circuit boards, and fine wiring (21-25 gauge).
CHT3
Weller® Soldering Tip, Chisel; Ideal for working on electrical components, small metal pieces, and larger wiring (12-18 gauge).
ColdHeat and Athalite are trademarks of Hyperion Innovations, Inc.
P.O. Box 728 Apex, NC 27502 www.cooperhandtools.com CHT05-10642/MW-?????/25M/PRINTED 12/05/USA COOPER NO. 550477 © 2005, Cooper Industries, LLC Specifications subject to change without notice.
