Transcript
Mini WiFi Cam MODEL NO: WF81
USER MANUAL - Please ensure that you read the complete user manual carefully before using any part of the product. - Keep this copy safe for future reference in case of operational difficulties.
Content Safety Directions ..............................................................1 Product Accessories ........................................................ 2 Product Structure .............................................................2 Operation Guide ...............................................................3 Smartphone Software Installation ………...........................4 Product Specifications .....................................................18 Indicator status ................................................................18
SAFETY DIRECTIONS Please go through the following Safety Directions before you start using our product: - The Mini IP Cam is NOT waterproof or dustproof, so don’t use it outdoors, in adverse environments or during rain. - In order to avoid any damage to the device, the risk of electric shock to you or starting a fire, use original DC power-supply. - You are forbidden from doing any unauthorized disassembling or dismantlement of this device, or replacement of its parts. The device’s manufacturer will not take responsibility or pay liabilities for any loss caused by such actions. - To avoid explosions, damages or bodily injuries, never put this device into an oven, microwave oven or direct fire. - Owing to version changes, this user manual may vary a little from our real product currently on the market. In such a case, please take the standard to be the real product. 1
PRODUCT ACCESSORIES
Mini IP Cam x 1
Bracket x 3
Silicone case x 1
User Manual x 1
Neck lanyard x 1
Card reader x 1
USB Cable x 1 Warning sticker x 1
PRODUCT STRUCTURE Record/Stop
indicator
hole for neck strap
Camera Power on/off
Mode Button Micro SD slot
Mini USB port
2
QUICK GUIDE FOR CHARGING AND RECORDING 1) Charging - The Mini IP Cam comes with a built-in rechargeable battery(200mah). Before you can start using it, please use the provided USB cable to fully charge it first. - The red indicator will stay on during charging, it goes off when the camera is fully charged. indicator
2) Taking Videos - Insert the Micro SD card into the camera and power it on. - Press on the Record/Stop button to start recording. The blue indicator will flash slowly. - Another press on the Record/Stop button to stop recording. The blue indicator will stay on. Record/Stop
Impotant notice: 1.We strongly recommend that you format the micro SD card for the first time use. 2.Use the provided card reader to transfer your video files to your computer to playback. 3.We recommend to use Windows Media Player to playback for a smooth video. 3
QUICK GUIDE FOR SMARTPHONE SOFTWARE INSTALLATION
AP Connection steps: 1) Scan the QR code or download "MINI IP CAM" from the App store or Google Play and install it.
Android
IOS
Mini IP Cam
2) Power on the camera and switch it to AP mode ( The default is AP mode already)
4
3) Click the setting from your cell phone and find the camera hotspot wifi,the wifi name should be : IPCAM_XXXXXX (where xxxxxx are 6 digits). And connect it.
5
4)Go back to the APP to add the camera and then auto search ,the camera will be found in the AP mode.
5) Now the user can click on "IPC-xxxxx" so as to view the camera via its hotspot.
IPC-E8ABFA2E8062 RCAM-007250-NZCZS
6
6) Although not suggested, just in case your camera’s LAN search is not working properly, you can use the Manual add to input ID on the camera’s back, User name default as: admin. Then rename it the way you want and save it.
7
P2P Connection steps: Whenever Wi-Fi Internet is available, you can use this device as an IP camera. 1) On finishing AP Connetion,click setting from the APP and click the wifi list to find your local wifi
1
2
3
4 8
2) Input your password and save it to connect the camera with your local wifi network.
3) Wait for 1 minute around for the camera to be rebooted.
9
4) After reboot is finished.Pls Switch the AP mode to P2P mode from the camera on the right side
5) Then wait the red signal to be green dot and shown the wifi icon
10
6）Now you are able to view the camera remotely.
11
THE MENUS ON CAMERA'S MAIN INTERFACE 1) Camera: - You will see all the cameras successfully added.
2) Gallery: - All photos and videos recorded in your mobile can be seen here.
12
3) System: - Receive Push message: This must be enabled if you set mail setting and alarm setting - Software Version Information: This indicates the software version for future upgrades.
4)Setting tool Click on that,you will see a sub-menu as below:
13
4.1) TF: Click here to check the files recorded in the Micro SD card of the Mini IP camera.
4.2) Adjust: While in P2P mode, click in order to adjust the camera’s time same as you would do with your mobile.
14
4.3) Edit: Click to name/rename your camera, or create a password for your camera.
Important Remind: Pls carefully make note of your password if you'd like to change it.Since this camera doesn't allow any password reset to default for a security purpose! 4.4) Delete: Click here to delete the camera you've already installed.
15
4.5) Settings: 4.5.1) User Settings: This allows you to add other user as visitor of your camera 4.5.2) Wifi Settings: This allows you to connect your camera to your local wifi network as stated above for P2P connection. 4.5.3) Mail Settings: This allows you to set the receivers of Mail alarm. 4.5.4) Alarm Setting: This allows you to enable or disable the motion detection,send alarm mails and alarm recording. 4.5.5) Restore default:This allows you to restore to factory default. 5) Camera live feed
16
5.1) Vido resolution ： This allows you to change the video resolution as you want. 5.2) Record video : This allows you to record video to your app's Gallary 5.3) Take photo : This allows you to take photo to your app's Gallary
17
PRODUCT SPECIFICATIONS Video Format
ASF 640x480 @ 30FPS, with audio.
Camera Lens
Color-pinhole.
Focal Distance
2.8 mm.
Memory Support
Up to 32 GB.
USB Port
USB 2.0.
File Overwrite
Auto
Resolution
VGA /QVGA.
Record Time Display
Yes
Size of Video File
Approx. 24 M/min (VGA).
Power Consumption
Max. 230 mA, 3.7 V (With Wi-Fi, LED).
Power Supply Supported:
Input 100 - 240 V; Output 5 V, > 500 MA.
Operation Temperature
-10 – 50.
Operating Humidity
20% - 80%.
Dimensions
57 x 23 x 20.5 mm.
Indicator status Status Meaning (Blue indicator) Always on Stand by
Status Meaning (Red indicator) Always on Charging battery
Flashing
In recording Off
Off
Powered off
18
Battery full
