Transcript
333502C
Mobile Lubrication Library
Wheel Loader Suggested wheel loader automated lubrication system layout Kit No.: 24R376, G3, USP, 22PT Maximum System Working Pressure: 3000 psi (206 bar, 20.7 MPa)
Important Safety Information
Read all warnings and instructions in all related manuals. Save all instructions.
Related Manuals Manual No. Manual Title 3A0414 3A0525 3A0528 3A0860
G3 Pump Pressure Relief Valve Remote Manual Run USP Valves
Fluid leaks from incorrectly installed or ruptured components, and/or failure to verify the components are properly installed and tested, can result in serious injury such as fluid spraying in the eyes or on skin and fluid injection, or equipment damage. To prevent injury or equipment damage, installation must be done by a professional and tested prior to use. Consult Parker literature for specific hose assembly instructions. These instructions are available from your Parker representative or at www.Parker.com/pdf.
The information contained in this document is only a recommendation for an automatic lubrication system and is not intended to replace the installation and maintenance instructions provided by the original equipment manufacturer.
Mobile Lubrication Library
Suggested Lube Points USP Valves
Mobile Lubrication Library
LUBE POINT INFORMATION Lube Point USP Outlet 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
5 1 6 4 2 3 7 and 8 9 and 10 1 2 11 and 12 3 4 5 6 7 and 8 9 and 10 1 2 and 3 4 5 6
Bearing Description Bucket connection pin right Bucket cylinder head center Bucket connection pin left Bucket cylinder foot center Center H pin Arm cylinder head center Bucket arm pivot pin left Bucket arm pivot pin right Bucket arm pin right top Bucket arm pin left top Arm cylinder foot center Pivot pin left Pivot pin right Articulation cylinder head left Articulation cylinder head right Articulation cylinder foot right Articulation cylinder foot left Articulation pivot left Articulation pivot center Articulation pivot right Differential Differential
USP Block SB#2 SB#2 SB#2 SB#2 SB#2 SB#2 SB#3 SB#3 SB#3 SB#3 SB#3 SB#3 SB#3 SB#3 SB#3 SB#4 SB#4 SB#4 SB#4 SB#4 SB#4 SB#4
USP Volume Dispense Double Single Double Single Single Single Double Double Single Single Double Single Single Single Single Double Double Single Double Single Single Single
Typical Pump Installation
Manual Run Button
Pressure Relief
To Fuse/Power
To Lube Points G3 Pump
USP Valve
Mobile Lubrication Library
24R376: Recommended Kit Parts List Part Number 96G112 571036 571028 24E407 24E408 24E409 571033 24N007 24N008 16U586 556773 556763 555749 557393 556402 557349 16U587 15K783 127009 16U982 16U983 24F467 557944 128006 563178 127013
Description PUMP, G3-G-24MX-8L0L00-UDMVA1R2 (see manual 3A0414) KIT, accessory, cover KIT, accessory, pressure relief (see manual 3A0525) KIT, valve, USP, 8 outlet (see manual 3A0860) KIT, valve, USP, 10 outlet (see manual 3A0860) KIT, valve, USP, 12 outlet (see manual 3A0860) KIT, remote manual run, 24V, w/ cable (see manual 3A0528) KIT, accessory, mounting, USP, 6-8 KIT, accessory, mounting, USP, 10-12 KIT, accessory, hose, 100 ft HOSE, end female swivel SAE 4 JIC FITTING, 4 JIC 1/8 pm CONNECTOR, 4 JIC 1/8 pm COUPLING, 1/8 fp x 1/8 mp x 1-1/4 HEX FITTING, 1/4 x 1/8 nptf hex PLUG, dryseal 1/8 nptf KIT, accessory, guard, scuff, 75 ft FITTING, elbow, street, 1/8 TIE, cable, 14.75’ x .31” black KIT, accessory, hose, 200 ft KIT, accessory, guard, scuff 160 ft PLUG, USP, doubling plug CLAMP, 7/16, tube 4TS6-14002 CLAMP, hose, .375 OD hose COUPLING, extension 1/8 female to 1/8 male FITTING, swivel, JIC 37D size #4
Qty 1 1 1 1 1 2 1 1 3 1 8 24 30 22 1 4 1 5 4 1 1 17 20 20 4 44
USP VALVES* AND ACCESSORIES Part Number 24E406 24E410 24E411 24N007 24N009 *see manual 3A0860
Description KIT, valve, USP, 6 outlet KIT, valve, USP, 14 outlet KIT, valve, USP, 16 outlet KIT, mounting bracket, 6-8 outlets KIT, mounting bracket, 14-16 outlets
Graco Information For the latest information about Graco products, visit www.graco.com. TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor. Phone: 612-623-6928 or Toll Free: 1-800-533-9655, Fax: 612-378-3590 All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents. Original information. This manual contains English. MM 333502
Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA Copyright 2013, Graco Inc. All Graco manufacturing locations are registered to ISO 9001. www.graco.com August 2013, revised April 2015
