Transcript
TL310
WHEEL LOADER
Specifications
Features
Operating weight
38,800 lbs (17,600 kg)
Excellent all-round visibility
Engine power
200 HP (149 kW)
Steel cab with perfectly designed operator's stand
Bucket capacity
3.9-8.5 yd3 (3.0-6.5 m3)
Easy service accessibility for minimized downtime
Tipping load, straight
29,100 lbs (13,200 kg)
Ergonomically designed controls for fatigue-free operation
Tipping load, articulated
25,350 lbs (11,500 kg)
Self-locking differentials provide optimum traction
Operating load, articulated
12,300 lbs (5,580 kg)
Loader frame with TSP kinematics Fuel efficient Cummins turbocharged diesel engine Fully automatic VarioPower transmission for smooth acceleration up to 25 mph (40 kph)
SPECIFICATIONS OPERATING DATA, STANDARD EQUIPMENT Operating weight (ISO 6016) 38,800 lbs (17,600 kg) Unladen weight 38,140 lbs (17,300 kg) Tipping load, straight at full reach, direct mounting / QAS 29,100 / 27,998 lbs (13,200 / 12,700 kg) Tipping load, articulated at full reach, direct mounting / QAS 25,350 / 24,250 lbs (11,500 / 11,000 kg) Operating Load, fully articulated 12,300 lbs (5,580 kg) Total length, bucket on ground 24' 11" (7,600 mm) Total width 8' 10" (2,680 mm) Turning radius at outside bucket edge 21' 3" (6,475 mm) Turning radius at outside edge of tires 19' 4" (5,900 mm) Turning radius at inside edge of tires 10' 1" (3,065 mm) Wheelbase 10' 8" (3,250 mm) Total height (top of cab) 11' 2" (3,400 mm)
ENGINE Manufacturer, model Type Combustion Displacement Net power rating at 2,200 rpm (SAE J 1349) Cooling system
Cummins, QSB 6.7 6-cylinder turbocharged diesel engine, COM III/EPA III 4-stroke cycle, Common Rail injection 409 in3 (6,700 cm3) 200 hp (149 kW) Water
ELECTRICAL SYSTEM Nominal voltage Battery
24 V 2 x 12 V / 110 Ah / 850 A
POWER TRANSMISSION Hydrostatic drive, closed circuit, independent from loader hydraulics. Driving automatics, that is, automatic optimization and adjustment of drawbar pull and speed. The travel drive in closed circuit additionally acts as non-wearing service brake. Hydraulic motor power shift providing two speed ranges. Infinitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear axle via cardan shaft to front axle. One inch-brake-drive pedal for sensitive driving and stopping at high engine speed. 2 gears: “Low” 0-3.7 mph (0-6 kph) “High” 0-25 mph (0-40 kph)
AXLES Front: Rigid planetary final drive axle. Limited slip-type differential 45%.. Rear: Oscillating (with cushioning) planetary final drive axle, with integrated reduction gear. Limited slip-type differential 45%. Angle of oscillation ±12°
TIRES Standard
23.5 R25 VJT Bridgestone
BRAKES Service brake:
Auxiliary brake: Parking brake:
Hydraulically actuated two-circuit power brake system. Oilimmersed multi-disc brakes in both axles, acting on all 4 wheels via 4-wheel drive. Hydrostatic drive provides dynamic braking. Spring-loaded brake acting on the discs of the rear axle.
STEERING Fully hydraulic, proportionally acting articulated steering. 2 steering cylinders with final positioning damping on both sides provide for powerful steering. The steering oil supply follows the load-sensingsystem; this ensures that the working hydraulics oil volume is available to the steering system as needed, so that fast steering movements are possible even at low engine speeds. Total steering angle 80°
FLUID CAPACITIES Fuel tank Hydraulic system (incl. tank)
63 gal (240 l) 36 gal (135 l)
HYDRAULIC SYSTEM Max. pump capacity 58 gpm (220 l/min) Max. working pressure 5,080 psi (350 bar) Control unit: Three-circuit control block with load-sensing flow distribution (LUDV). Simultaneous, independent control of all movements. Sensitive maneuvers irrespective of loads. Control circuits “Lift / Lower”, “Dump / Tilt-back” pilot-operated. Additional control circuit electrically operated with preselection of flow rate and impulse/continous operation. Ease of operation thanks to single, four-way control lever (joystick) with integrated direction-of-travel switch and switch for additional control circuit.
LOADER FRAME Loader frame with TSP-linkage, attachments directly mounted. General-purpose bucket (SAE J 742) Lift capacity at ground level (SAE J 732) Breakout force at bucket edge (SAE J 732)
3.4 yd3 (2.60 m3) 31,698 lbf (141,000 N) 26,955 lbf (119,900 N)
LOADER FRAME Loader frame with TSP-linkage, attachments directly mounted. General-purpose bucket (SAE J 742) Operating load in general-purpose bucket 3.9 yd3 (3.0 m3), quick-attach system Operating load in general-purpose bucket 4.0 yd3 (3.1 m3), direct mounting Lift capacity at ground level (ISO 14397-2) Breakout force at bucket edge (ISO 14397-2), quick-attach system Breakout force at bucket edge (ISO 14397-2), direct mounting
3.4 yd3 (3.10 m3) 11,905 lbs (5,400 kg) 12,300 lbs (5,580 kg) 52,160 lbf (232,000 N) 28,980 lbf (128,900 N) 34,530 lbf (153,600 N)
FORK LIFT ATTACHMENT Operating load over the total lift and steering range Width of fork carrier Length pallet forks 5.9" x 3" (150 mm x 70 mm) Stability factor Load center from fork attachment point
15,870 lbs (7,200 kg) 6' 3" (1,900 mm) 3' 8" (1,200 mm) 2 24" (600 mm)
CAB Removable roll-over secure driver's cab, ROPS tested according to ISO 3471, FOPS tested according to ISO 3449, only with skylight guard. Panoramic, tinted safety glass, with skylight window. 2 doors, 180° aperture angle, foldable rear mirrors. 2 front and 2 rear working floodlights. Sliding window in left door standard. Electrical windshield intermittent wipers with front and rear washing system. Cab heating through coolant heat exchanger with 3-speed heater fan, windshield defroster front and rear, 2 adjustable outlet nozzles for front window, foot space and rear windows. Heating blower convertible from circulating to fresh air mode. Fresh air filter with a dust filtration unit of 2.8 μm. Ergonomically designed driver station with functional design, very good circumferential visibility and optimally designed control elements. All operating functions are ergonomically arranged. Driver's seat with hydraulic cushioning, progressively adjustable to operator's weight, lap belt, longitudinal and height adjustment, in compliance with ISO 7096 and ISO 6683. Level and elastically mounted driver cab floor makes entry and exit as well as cab cleaning easier. Klimatronik as standard. Radio pre-installation. Height and tilt-adjustable steering wheel. Holders and deposit for on-board tools, first-aid kit and operating manuals. Sound level values in compliance with EC-directives.
TL310
DIMENSIONS GENERAL-PURPOSE BUCKET
80°
8'10" (2,680)
4 0°
Capacity (SAE J 742): 4.0 yd3 (3.10 m3) Density of material: Max 3,000 lbs/yd3 (1.8 t/m3)
13' 2" (4,260) 10' 1" (3,065)
43° 29" (734)
27" (675) 3" (73)
33°
10' 8" (3,250) 24' 11" (7,600)
41) 2,1 50) 7' ( " (2,9 9' 8
41°
tl310
11' 2" (3,400)
3' 10" (1,165)
10' 1"
(3,06
5)
21' 3" (6,475)
5' 10" (1,776)
FORK LIFT ATTACHMENT
80°
8'10" (2,680)
40°
31" (790)
12' 11" (3,940)
5' 5" (1,655)
31" (795)
1" (28)
0) ,84 ' (1 0) x. 6 190 ma ' 3" ( 6
6' 4" (1,920)
tl310
24" (600)
10' 1"
(3,06
5)
19' 7" (5,970)
26' 8" (8,130) Operating load over total lift range: 15,870 lbs (7,200 kg)
BUCKET TYPE General-purpose bucket, quick-attach system (QAS), teeth General-purpose bucket, QAS, bolt-on cutting edge General-purpose bucket, directly mounted, teeth General-purpose bucket, directly mounted, bolt-on cutting edge Earth bucket, QAS, teeth Earth bucket, QAS, bolt-on cutting edge Earth bucket, directly mounted, teeth Earth bucket, directly mounted, bolt-on cutting edge Light-material bucket, QAS, bolt-on cutting edge Light-material bucket, directly mounted, bolt-on cutting edge Light-material bucket, QAS, bolt-on cutting edge Light-material bucket, directly mounted, bolt-on cutting edge Light-material bucket, QAS, bolt-on cutting edge Light-material bucket, directly mounted, bolt-on cutting edge High-tip bucket, QAS, bolt-on cutting edge High-tip bucket, QAS, bolt-on cutting edge High-tip bucket, QAS, bolt-on cutting edge High-tip bucket, QAS, bolt-on cutting edge
Capacity 3.9 yd3 (3.00 m3) 3.9 yd3 (3.00 m3) 4.0 yd3 (3.10 m3) 4.0 yd3 (3.10 m3) 4.3 yd3 (3.30 m3) 4.3 yd3 (3.30 m3) 4.2 yd3 (3.20 m3) 4.2 yd3 (3.20 m3) 5.0 yd3 (3.80 m3) 5.2 yd3 (4.00 m3) 6.3 yd3 (4.80 m3) 6.5 yd3 (5.00 m3) 8.2 yd3 (6.30 m3) 8.5 yd3 (6.50 m3) 5.6 yd3 (4.30 m3) 5.9 yd3 (4.50 m3) 7.6 yd3 (5.80 m3) 7.8 yd3 (6.00 m3)
Density 3,000 lbs/yd3 (1.8 t/m3) 3,000 lbs/yd3 (1.8 t/m3) 3,000 lbs/yd3 (1.8 t/m3) 3,000 lbs/yd3 (1.8 t/m3) 2,700 lbs/yd3 (1.6 t/m3) 2,700 lbs/yd3 (1.6 t/m3) 2,700 lbs/yd3 (1.6 t/m3) 2,700 lbs/yd3 (1.6 t/m3) 2,000 lbs/yd3 (1.2 t/m3) 2,000 lbs/yd3 (1.2 t/m3) 1,333 lbs/yd3 (0.8 t/m3) 1,333 lbs/yd3 (0.8 t/m3) 1,000 lbs/yd3 (0.6 t/m3) 1,000 lbs/yd3 (0.6 t/m3 1,333 lbs/yd3 (0.8 t/m3) 1,333 lbs/yd3 (0.8 t/m3) 1,000 lbs/yd3 (0.6 t/m3 1,000 lbs/yd3 (0.6 t/m3
Width 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm) 9' 8" (2,950 mm)
Dump height 10' 1" (3,065 mm) 10' 1" (3,065 mm) approx. 10' 3" (3,135 mm) approx. 10' 3" (3,135 mm) approx. 9' 11" (3,025 mm) approx. 9' 11" (3,025 mm) approx. 10' 2" (3,095 mm) approx. 10' 2"(3,095 mm) approx. 9' 6" (2,885 mm) approx. 8' 9" (2,675 mm) approx. 8' 9" (2,675 mm) not specified not specified not specified not specified not specified not specified not specified
Clay (dry), clay & gravel (wet), earth with sand & gravel: Gravel (sandy), gravel (wet): Clay (natural bed), clay (wet)
3,100 lbs/yd3 (1,839 kg/m3) 3,700 lbs/yd3 (2,195 kg/m3) 3,500 lbs/yd3 (2,077 kg/m3)
EXAMPLES OF MATERIAL DENSITIES Earth (top soil): Earth (dry): Earth (moist), clay with gravel (dry): Earth (compacted), gravel (dry):
2,550 lbs/yd3 (1,512 kg/m3) 2,650 lbs/yd3 (1,572 kg/m3) 3,000 lbs/yd3 (1,780 kg/m3) 3,000 lbs/yd3 (1,780 kg/m3)
OPTIONAL EQUIPMENT TIRES
ENGINE
23.5-25 EM 60 Mitas 23.5 R 25 VSDT L5 Bridgestone 23.5 R 25 XHA2 L3 Michelin 23.5 R 25 XLDD 2A L5 Michelin 23.5 R 25 XMINE D2 L5 Michelin 23.5 R 25 TL-3A+ Goodyear 23.5 R 25 RT-3B Goodyear 650/65 R 25 GP-3D Goodyear 650/65 R 25 XLD Michelin 750/65 R 25 VTS Bridgestone 750/65 R 25 TL-3A+ Goodyear 620/75 R 26 DT824 Goodyear Non-standard tires available on request
Diesel particle filter Preheater for cooling water, 230 V Alternative fuels available on request.
DRIVER’S STAND Operator's seat MSG 85 (comfort version), hydraulic damping, extra-high backrest, weight-adjustable, lap belt Air-cushioned operator's seat MSG 95 (premium version) with orthopedic lumbar support, extra-high backrest, adjustable armrests, headrest, seat and backrest heating
HYDRAULIC SYSTEM Open return Filling with biodegradable hydraulic oil, esterbased, BIO-E-HYD-HEES
4th control circuit, electrical “on-or-off” 4th control circuit, proportional
CAB
FRONT ATTACHMENTS HD bucket General-purpose bucket* Earth bucket* Light-material bucket* Light-material bucket* Light-material bucket* High-tip bucket* High-tip bucket* Fork lift attachment with forks: Carrier: 6' 3" (1,900 mm) wide Forks: 4' 11" (1,500 mm) long, 5.9" (150 mm) wide, 3" (70 mm) tall Load hook, attachable on fork arms Load hook integrated in quick-attach system Bucket teeth Cutting edges for buckets *optionally with bolt-on cutting edge
Catalyst Cyclone prefilter
3.9 yd3 (3.00 m3 4.0 yd3 (3.10 m3 4.3 yd3 (3.30 m3 5.2 yd3 (4.00 m3 6.5 yd3 (5.00 m3 8.5 yd3 (6.50 m3 5.9 yd3 (4.50 m3 8.5 yd3 (6.50 m3
Right-hand door with sliding window Working floodlights system Xenon Yellow beacon Pressurized cab system 2 additional floodlights for close range illumination (front)
Dust protection system Independent diesel heating with timer Anti-theft device (immobilizer) Preparation for close range illumination 4 additional floodlights for close range illumination (front and centered)
OTHER OPTIONAL EQUIPMENT Electrical tank refilling pump Pilot-controlled hose-rupture valves for lift and tilt cylinders Back-up alarm for reverse travel Central lubrication system Versa-Steer steering system Automatic bucket return positioner Automatic bucket return positioner incl. lift height limitation Extended loader frame 2’ 2” / 4’ 1” (+650 mm /+1250 mm) Further optional equipment available on request
Dynamic scales, with printer Ride control system Battery disconnector Protection for cardan shaft Guard for front window Guard for front lights Guard for rear lights
www.terex.com/construction Effective Date: February 2011. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2013 Terex Corporation. (R3_261113 TL310 2.5K 1113C Part No. N.A. Terex Construction 8800 Rostin Road, Southaven, MS 38671 USA Tel +1 (888) 90-TEREX www.terex.com
