Window Ventilators

Transcript

SECURITY PRODUCTS FOR BUILDINGS FROM A SINGLE SOURCE PROJECTcompendium SECURITY PRODUCTS FOR BUILDINGS FROM A SINGLE SOURCE PROJECTcompendium Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Project solutions Tailor-made solutions for every type of building . . . . . . . . . . . . . . . . . . . 08 Hospitals, retirement and care homes . . . . . . . . 10 Universities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Hotels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Stadiums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Banks and insurance offices . . . . . . . . . . . . . . . . . 18 Office and administrative buildings . . . . . . . . . . 20 Shopping centres. . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Airports and railway stations . . . . . . . . . . . . . . . . 24 Emergency and escape routes The ultimate in personal and property protection . . . . . . . . . . . . . . . . . . . . 26 Window technology . . . . . . . . . . . . . . . . . . . . . . . 32 Parallel offset hardware, Projecting top-hung hardware . . . . . . . . . . . . . . 34 Tilt&Turn hardware . . . . . . . . . . . . . . . . . . . . . . . . . 36 Tilt&Slide hardware . . . . . . . . . . . . . . . . . . . . . . . . 38 Lift&Slide hardware . . . . . . . . . . . . . . . . . . . . . . . . 40 Motor-driven Lift&Slide hardware . . . . . . . . . . . 42 Slide&Fold hardware . . . . . . . . . . . . . . . . . . . . . . . 44 Horizontal-Pivot / Vertical-Pivot hardware . . . . 45 Window turn handles . . . . . . . . . . . . . . . . . . . . . . . 46 Thresholds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 RWA/SHEV systems (smoke and heat exhaust ventilation) . . . . . . . . 48 Modern ventilation systems . . . . . . . . . . . . . . . . . 50 Fanlight openers . . . . . . . . . . . . . . . . . . . . . . . . . 51 Spindle drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Chain drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Window ventilators . . . . . . . . . . . . . . . . . . . . . . . 54 Sound-absorbing ventilators . . . . . . . . . . . . . . . 55 Door technology . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Security doors – multi-point door locks . . . . . . . 58 Escape door security. . . . . . . . . . . . . . . . . . . . . . . . 60 Mechanical and mechatronic locking systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 House entrance doors . . . . . . . . . . . . . . . . . . . . . . 64 Interior doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Push bars, touch bars . . . . . . . . . . . . . . . . . . . . . . . 68 Door hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Mechanical locking cylinders . . . . . . . . . . . . . . . . 72 Master key systems . . . . . . . . . . . . . . . . . . . . . . . . 74 Mechatronic locking cylinders . . . . . . . . . . . . . . . 76 GU-BKS ACCESS – access control . . . . . . . . . . . . 78 Bathroom door control system . . . . . . . . . . . . . . 79 Overhead door closers . . . . . . . . . . . . . . . . . . . . . . 80 Floor springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Hold-open systems . . . . . . . . . . . . . . . . . . . . . . . . . 83 Automatic entrance systems . . . . . . . . . . . . . . . 84 Revolving doors . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Controlled single-person access . . . . . . . . . . . . . 88 Sliding doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Swing door drives . . . . . . . . . . . . . . . . . . . . . . . . . . 92 All-glass sliding systems . . . . . . . . . . . . . . . . . . . . 94 Building management systems . . . . . . . . . . . . . 96 Systems management with the BKS NET building bus . . . . . . . . . . . . . . . . . . . . . . . 98 Security and building management solution GEMOS. . . . . . . . . . . . . . 100 GEMOS access – access control . . . . . . . . . . . . . 100 ArenaControl – security and media control at arenas . . . . . . . . 100 Planning support . . . . . . . . . . . . . . . . . . . . . . . . . 102 Project planning advice . . . . . . . . . . . . . . . . . . . . 103 Software for planners, building operators and users . . . . . . . . . . . . . . . 104 Distribution companies and production sites . . . . . . . . . . . . . . . . . . . . . . . . . . 106 5 Complete solutions, innovations, customer service Comfort and security As far as the opening and closing of doors and windows are concerned, comfort and security have to be the top priority. With our extensive range of modern builder’s hardware, security equipment and automatic entrance systems, we can meet this requirement by providing top-quality products. In doing so, our focus is not merely on the individual product. Rather, we create complete solutions that cater for the very latest market requirements. The hot topics of the day are building security and barrier-free concepts, along with the latest technology combined with user-friendliness. With its forward-thinking innovations, the Gretsch-Unitas Group has long been shaping the market and setting pioneering new standards. All around the world and for more than a century, our systems have been helping to prevent hazards, to reduce risks, to limit damage and to protect both people and property. Our complete range covers everything from planning and implementation right through to service. The guiding principle behind our research and development work is to constantly improve the functional properties of windows and doors, whilst at the same time making them easier to use and more secure. Sophisticated 6 mechanics and intelligent electronics are the perfect partners within this context. Our development work is geared equally towards the ever increasing demands of modern architecture and the principle of green building. The product and its advantages for human users are at the forefront of everything we think and do. The people who benefit most from this are our customers, for whom we are constantly designing new and reliable systems and whom we can offer tailor-made solutions for the specific building application concerned. It is on this basis that we have managed to build a worldwide reputation as a reliable partner. In parallel with this, the Group insists on motivating, developing and challenging its tally of more than 3,500 employees all around the world through its open corporate policy and extensive professional development programme. Within this context, we take seriously our responsibility to respect national cultures and maintain existing sites. The synergies between all these factors provide the basis for living out our key principle of “Securing technology for you”. System solutions for projects Window technology Curtain walls Tilt&Turn hardware Tilt&Slide hardware Lift&Slide hardware Door technology Motor-driven Lift&Slide hardware Escape route security System solutions for security doors Slide&Fold hardware Horizontal-Pivot hardware, Vertical-Pivot hardware Mechanical and mechatronic locking systems Window turn handles Thresholds Mechanical and mechatronic locking cylinders RWA / SHEV systems Modern ventilation systems Door hardware Access control Bath door control system for hospitals Overhead door closers Floor springs Hold-open systems Automatic entrance systems Revolving doors Security Doors Sliding doors Building management systems BKS NET building bus as systems management Security and building managment solution GEMOS GEMOS access – access control Swing door drives All-glass sliding wall systems Planning support Building project consulting Software for planners and building operators ArenaControl – security and media control at arena 7 Tailor-made solutions for every type of building. From planning to implementation Office and administrative buildings Stadiums, sporting facilities Hotels Airports, railway stations 8 In accordance with our key principle of “Securing technology for you”, you will find that many of the different products we offer can be easily combined. This includes products from our door and window technology ranges, our building management systems, and our automatic entrance systems. Our innovative hardware solutions for balcony-doors, locks, locking cylinders, mechanical and mechatronic master key systems, project and escape door hardware, along with our automatic sliding doors, revolving doors and all-glass sliding wall systems give you everything you could possibly want in terms of high-quality security and state-of-the-art technology. Banks, insurance offices Shopping centres Hospitals, retirement/care homes Nurseries, schools, universities 9 System solutions for hospitals, retirement homes and care homes Barrier-free and convenient For details of our latest reference projects, please visit www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 2 01-20 00 10 Window technology Access to fresh air in accordance with requirements – The VENTUS fanlight opener system The VENTUS fanlight opener system provides ample room ventilation, e.g. using the ELTRAL electric drive, which supports steplessly adjustable opening widths. The system is easy to operate and the fresh air supply can be controlled individually and in accordance with requirements. This advantage will be particularly appreciated by the elderly or those in need of care, who are particularly sensitive to cold and heat. Featuring an integrated locking mechanism, the fanlight opener achieves optimum gasket pressure when closed, thus offering high levels of heat and sound insulation as well as resistance to driving rain. VENTUS fanlight opener system See page 51 Door technology The perfect balance between security and visual appearance – Hold-open system with OTS 730 FER overhead door closer The OTS 730 FER overhead door closer with hold-open system and fire detector conforming to EN 1155 has an important role to play in terms of ensuring the safety of buildings such as hospitals, retirement homes and care homes. It really comes into its own when used on fire doors and smoke protection doors, which need to be left open within the context of normal everyday use and only need to close in an emergency. There is an invisible electromechanical hold-open unit integrated into the gliding rail, which holds the doors open, thereby ensuring that essential fire protection measures do not prevent business from carrying on as usual unless there is actually a fire. This means that there are no closed doors to interfere with the running of a given section of the building that is designed to be open plan. With its minimal mounting height and large adjustment range of 75° – 150°, the OTS 730 FER is suitable for single-leaf doors; the OTS 730 FER SRI is the version for double-leaf doors. OTS 730 FER SRI overhead door closer and hold-open system See page 81 Automatic entrance systems Convenient, barrier-free passage – The DTR swing-door drive In hospitals, hygiene is a top priority: Thanks to its automatic and contactless approach to door operation, the DTR swing-door drive not only enables doors to be opened hygienically and with ease, but also facilitates convenient and barrier-free passage. The variable hold-open time of up to 60 seconds means that the door system can be perfectly adapted to requirements. As a result, people with restricted mobility will still have plenty of time to pass through the door. The fact that the DTR runs so quietly makes it suitable for use in areas that are particularly sensitive to noise. DTR swing-door drive See page 92 Building management systems Manageable security – BKS NET system solutions When it comes to securing doors, the demands placed on the individual components are constantly increasing. Here, major importance is attached to the smooth interplay of all products allowing for the easy installation and secure functioning of the complete door assembly. All BKS NET compatible products, regardless of which Group division they come from, feature a uniform interface allowing to connect them among each other. For example, doors fitted with the escape door controller FTNT 10/20 in combination with EVP locks can be networked very conveniently. Door configuration and status visualisation can be performed centrally, e.g. at a reception desk. As user interface, a touch panel or the OV10 visualisation software with deposited floor plans provide a convenient and user-friendly solution. BKS NET system management See page 98 11 System solutions for schools, nurseries and universities Energy saving and security For details of our latest reference projects, please visit www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 2 01-20 00 12 Window technology Energy-saving 2-way ventilation – UNITAS Horizontal-Pivot hardware Whenever you have a large number of people together in the same space, the importance of fresh air must not be underestimated. Whether we are talking about nurseries, schools or universities, natural ventilation is always the key to safeguarding the indor climate. An adequate supply of fresh air is essential for concentration when people are trying to learn. The UNITAS Horizontal-Pivot hardware and associated sash brake can be used to hold casement windows in any ventilation position. The used air rises out from the top and fresh air streams in from the bottom. With its integrated 22° lock, the UNITAS 10 Horizontal-Pivot holds the window sash open just wide enough.This prevents children from falling out of an open window. UNITAS Horizontal Pivot hardware See page 45 Door technology No more wiring ! – Security solutions for doors in existing buildings Ensuring the safety of people inside a building is always the top priority. An intelligent and sophisticated locking system, the radio battery lock reduces the potential for danger in publicly accessible premises such as schools. Time periods including classroom breaks can be controlled by the teacher individually; for instance, it is possible to lock the classroom door toward the outside by a switch installed at the teacher‘s desk. Unauthorised access from outside is prevented, whilst opening the door from inside is possible at any time. This locking concept can be implemented on existing doors without major effort; it harmonises discreetly with the interior design of any classroom, thus allowing for a relaxed atmosphere for learning. Radio battery lock See page 63 Automatic entrance systems Armed for dealing with fires – The DTR B swing-door drive in accordance with DIN 18650 and EN 16005 Role: The DTR B swing-door drive forms an integral part of a hold-open device, allowing optimum convenience when passing through the door combined with maximum safety. The DTR B is triggered by smoke detectors. In the event of a fire, the drive unit (tested in accordance with DIN 18263 part 4) will shut the door reliably. Due to its sturdy design, the DTR B is also particularly suitable for doors that see a high level of traffic. On both sides, the swing-door drive is supplemented by an active infrared sensor strip for securing the door leaf’s pivot range. DTR B swing-door drive See page 92 Building management systems Intelligent information and individual access control with GEMOS and GEMOS access Monitoring, indicating and controlling door statuses in order to provide transparent security at schools is a matter for GEMOS and GEMOS access. Individual doors or doors of complete floors or building sections can be opened or locked according to requirements; the responsible persons are informed immediately and automatically about significant events by SMS through the GSM module and called automatically through the GEMOS language module which produces a dynamically created spoken message submitting details of the particular event. Rooms, halls, and stairways can be filled with sound by connecting the ELA system of electrical loudspeakers to GEMOS. GEMOS, GEMOS access See page 100 13 System solutions for hotels Safety and convenience when underway For details of our latest reference projects, please visit www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 2 01-20 00 14 Window technology Creating a refreshing atmosphere – Lift&Slide doors Good ventilation within the hotel room is an important factor for ensuring a pleasant stay. Having to breathe in thick and heavy air is no fun at all. Clearly, this does not just apply to rooms that have been left vacant for a while. A Lift&Slide door makes it easier for the hotel guest to ventilate his or her room as desired and to step out onto the balcony. Operation of such doors remains easy, even when large and heavy door leaves are involved. In addition to the option of manual operation, with the HS-Master it is also possible to open the door leaves using a motor. If guests are keen on having a measured fresh air supply without missing the feeling of safety, this can be easily achieved with the slit ventilation module with integral insect screen tested to burglar resistance grade BRG 2 (WK 2). Lift&Slide doors See page 40 Door technology Safe and convenient – The OTS 730 FER door closer In hotels, staircase doors and doors along corridors ensure protection against smoke and fire. All such doors must be equipped with self-closing door closers in accordance with EN 1154. However, this requirement can pose a problem for guests who have both hands full due to their luggage. A convenient solution can be found in the form of the GU-BKS OTS 730 FER overhead door closer, which has an electromechanical hold-open device integrated into the gliding rail. Hidden from view, this makes it possible to hold the doors permanently open, thereby ensuring easy passage during everyday use. In an emergency, the hold-open devices release and the doors are closed automatically. What’s more, with its understated elegance the OTS FER makes quite an impression. OTS 730 FER See page 80 Automatic entrance systems A welcoming lobby – Revolving doors By having a welcoming and attractive lobby, you can send a powerful message to your hotel guest. Revolving doors offer convenience and are ideal for designing a bespoke entrance. These doors, which are available in a variety of dimensions and design versions, provide a great deal of planning freedom and involve the use of high-quality technology. They can even be integrated into modern glass façades without difficulty. Large-capacity revolving doors are available for large hotel complexes and these are specially designed to handle large amounts of traffic. With this system, the three or four door leaves are always arranged in such a way as to prevent draughts, even when people are entering the hotel. Similarly, other unwelcome guests are also kept outside: noise, dirt and exhaust fumes have no chance of making their way inside. Revolving doors See page 86 Building management systems New solutions for escape doors – The approach area monitoring system Requiring nothing more than the supply of voltage, the approach area monitor can be installed above any door. Its sensors monitor an individually determinable area in front of a door. Visual and acoustical alarms clearly signal the approach of a person. Thus, any attempts to misuse a door are hindered from the start and not only when the door is opened as it is the case with customary escape door security systems according to the German EltVTR directive. Structural changes to the door are not necessary. Escape routes are not affected in any way. Retrofitting the monitoring system is especially profitable on fire doors. Expert knowledge to start up the monitor is not needed. Connecting the monitor to a superordinate management system such as GEMOS is possible via the integral BKS NET interface. BKS NET System management See page 98 15 System solutions for stadiums and sporting facilities Vital door technology For details of our latest reference projects, please visit www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 2 01-20 00 16 Window technology Extremely easy to open – The Fold&Slide element for VIP areas Even a well-designed VIP area can prove frustrating to guests, if the view of the playing field is significantly obscured by mullions or frame profiles. With this convenient opening mechanism, all folding sashes can be pushed to the side in a compact manner, leaving the view from the window totally clear. The flat gliding rail emphasises the Fold&Slide element’s elegant appearance and ensures a barrier-free concept. There is a gasket running all the way round to ensure high levels of heat and sound insulation. The castors with ball bearings make the Fold&Slide element extremely easy to operate – even with just one hand. Fold&Slide hardware See page 44 Door technology Armed for an emergency – Exit devices in accordance with EN 1125 If a packed stadium suddenly breaks into a panic and thousands of spectators start trying to get out in the minimum amount of time, all the escape doors need to open as quickly as possible and without the need for excessive force. Not only do our push and touch bars produced in accordance with EN 1125 meet these requirements, but they also provide an easy means of opening single or double-leaf door solutions, making them ideal for securing emergency and escape routes. A panic lock can be installed to create a high-quality exit system that enables doors to be opened in a flash. Exit devices in accordance with EN 1125 See page 68 Automatic entrance systems Smooth-running and convenient – The compactMaster CM sliding door The compactMaster CM sliding door features a particularly slimline drive, which can be readily integrated into modern glass façades. Other ideal applications include shops or kiosks inside stadiums. The compactMaster CM combines modern entrance solutions with innovative security technology without a second thought. Thanks to the rubber cushion under the running rail and its large rollers, this product ensures outstandingly smooth and quiet running when it comes to sliding doors. The optional multi-point lock will ensure that the doors can be locked conveniently and securely. compactMaster CM sliding door See page 90 Building management systems Personal safety is top of the agenda – GEMOS with ArenaControl offers the required flexibility Today, the technical equipment in modern sports and multi-purpose arenas must meet the highest requirements. However different events may be, the technical facilities of a venue must suit them all – regardless of whether sporting event, conference, concert, TV show or boxing match. Allowing to network all media and security installations in a venue, the GEMOS module ArenaControl offers considerable benefits. Predefineable scenarios for different kinds of events and individual workstation interfaces allow for a high planning security and for important cost savings both when purchasing and operating facility equipment GEMOS, ArenaControl See page 100 17 System solutions for banks and insurance offices Leaving nothing to chance For details of our latest reference projects, please visit www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 2 01-20 00 18 Window technology Individual window solutions for façades Windows as façade elements must meet the highest requirements with regard to safety, function, statics, and protection against influences from both inside and outside. It takes complex window hardware systems to fulfill all these demands in a technically sophisticated and reliable way. Gretsch-Unitas offer comprehensive hardware solutions consisting of standard products and supplementing components – innovative technology for windows in modern façades. Projecting top-hung and Parallel offset windows See page 34 Door technology Improved protection against burglars: GU-SECURY multi-point door lock The highest degree of security is offered by the automatic locking system GU-SECURY Automatic. The door can be automatically locked at up to 4 points to prevent any unauthorised access. In the case of Series 19 and 21 SECURY locks, there is no need to lock the door manually with single or double-leaf escape door systems. The doors are locked automatically by means of three latchbolts. Door handles, push bars or touch bars can be mounted on the inside of the door. By contrast, from the outside a protective fitting demonstrates to potential intruders that the door features improved protection against burglars. Thus, the SECURY 19 and 21 products not only meet panic lock requirements, but they also fulfil the need for security thanks to their multi-point locking system. GU-SECURY multi-point lock See page 58 Automatic entrance systems The complete security package – The GSI security curved sliding door Banks, in particular, require access control systems to be installed in areas where security is especially important. Access to these areas must be meticulously controlled. The GSI security curved sliding door is perfect for such applications in terms of monitoring access by individuals. Only one person is granted access to the intermediate area at a time. Once the person enters the circular compartment, one of the door leaves closes. The person will only be able to pass through the second leaf once they have been identified as an authorised individual. In order to allow easy identification of the person who has entered the security compartment, the doors feature a large amount of glass. The roof of the circular compartment is waterproof, making it suitable for outdoor use as well. GSI security curved sliding door See page 88 Building management systems Leave nothing to chance with access control systems It is good to know which people are currently inside the building – particularly when dealing with areas where security is very important: With our modular access control system you can control all the traffic within a building. Visitors are provided with temporary permits. Access authorisation can be precisely defined on both a temporal and a geographical basis. The flexibility with which the system can be adapted to new door situations and the possibilities it offers for integrating both straightforward door controls and complex room/security zone models ensure complete transparency in terms of authorisations. Access control systems See page 96 19 System solutions for office and administrative buildings Individual security in large spaces For details of our latest reference projects, please visit www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 2 01-20 00 20 Window technology Secure opening and closing – UNI-JET Tilt&Turn hardware The UNI-JET Tilt&Turn hardware system, whose locking points all feature steel mushroom cams, ensures that windows can be opened and closed securely. The striker design, which conforms to EN V 1627–1630 from basic security right through to BRG 2 (WK 2), provides added security. An electrical locking monitoring system can be integrated into a building management system. Mushroom cams automatically adjust themselves to the actual rebate clearance. Contract door handles perfectly complementing the window handles are available. UNI-JET Tilt&Turn hardware See page 36 Door technology Reliable and quiet – The OFFICE lever handle In offices, where the door is always open (to the right people) the OFFICE handle, which boasts gentle operation, is the perfect choice. The special BKS bearing technology ensures minimal friction losses, thereby preventing annoying ambient noise when you enter the room. As a result, your colleague can carry on concentrating on his or her work without being disturbed by the sound of the opening door. Ultimately, alongside the issue of security, this plays a key role in establishing a good working environment inside office buildings. Once again, everything is available from a single source: there are OFFICE window handles available to match the door handles. OFFICE lever handles See page 70 Automatic entrance systems The ultimate in slimline technology – Automatic entrance systems An aesthetically pleasing entrance that adds to the building’s character can make an important statement when somebody is entering the building. This is no less true of office buildings. The compactMaster sliding door features a particularly slimline drive, which can be readily integrated into modern glass façades. Modern entrance solutions can be combined with innovative security technology without a second thought. Impressive down to the last detail: the rubber cushion under the compactMaster’s running rail ensures outstandingly smooth and quiet running when it comes to sliding doors. More stringent security requirements can be catered for with an optional automatic multi-point locking system. compactMaster sliding door See page 90 Building management systems Free scalability with GEMOS The claim for high security in building complexes can only be satisfied with a clear overview of all individual instruments. The handling of a vast number of products must be easy and intuitive, their functions must be controllable and visualisable; this applies e.g. to fire detectors, burglar alarm systems, cameras, access control readers, loudspeakers, intercoms, and escape door terminals. GEMOS manages to do this on a manufacturer-neutral and type-independent basis by means of a uniform user interface. Possible extensions of integrated subtrades can be made according to the customer‘s choice independently of manufacturers. Changes in spatial use can easily be imported into GEMOS on the basis of CAD plans. GEMOS See page 100 21 System solutions for shopping centres A tailor-made entrance For details of our latest reference projects, please visit www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 2 01-20 00 22 Window technology Crucial fire protection modules – RWA / SHEV Large numbers of people congregate in shopping centres. Therefore, they are one of the primary locations where smoke and heat exhaust systems are required as part of the fundamental technology: If a fire breaks out, it needs to be detected quickly and the available smoke exhaust systems need to be opened promptly by means of electrical drives. This helps to keep escape routes clear of smoke, to save lives and to minimise any consequential damage resulting from the fire. Our modular RWA central system units can handle the supply, coordination and control tasks for these smoke exhaust openings both in an emergency and within the context of everyday room ventilation. Fault or alarm messages are logged or, if the systems are networked, forwarded to a GLT building management technology system. RWA smoke exhaust ventilation See page 48 Door technology Humble servants – Floor springs UTS Inside busy shopping centres, floor springs should be as unobtrusive as possible if not completely concealed from view, yet at the same time enable doors to close without any hassle. It is precisely these qualities that can be found in the floor springs UTS from the Gretsch-Unitas Group. Thanks to their corrosion-resistant, galvanised cement case and cover plate, they are ideal for indoor and outdoor use. There is scope for longitudinal, lateral and height adjustment between the housing and cement case and this facilitates door assembly. Any potential temperature fluctuations are compensated by means of thermo valves to ensure consistency in terms of the closing function. The closing force and speed can be custom-set so that any door can be opened in accordance with requirements. Standardised cover plates are used to create a uniform appearance. Special UTS versions are also available for fire and smoke protection doors, as well as for hold-open devices. UTS floor springs See page 82 Automatic entrance systems An invitation to customers – The GSW-M shopMaster The Gretsch-Unitas Group very much believes in the saying “each to his own” and this is reflected in its GSW-M all-glass system, which is perfect for partition walls and façade concepts within the context of shop-in-shop construction work. Regardless of which version you opt for, whether linear or curved in segments, the system allows you tremendous freedom when designing façades and can be used to cater for a variety of floor plan layouts. The GSW-M even offers flexibility in terms of how you decide to arrange the various elements. In addition, no cumbersome floor guide is required for the all-glass doors. To allow for the creation of a generously proportioned shop entrance, the GSW-M can be installed flush with the ceiling. The running track and parking niche take up a minimal amount of space, adding to the shopMaster’s appearance, which is elegant in every respect. Not only does the all-glass system boast impressive smooth-running door elements, but will also win you over with its high-quality hardware that enables secure locking. GSW-M shopMaster See page 94 Building management systems No chance for burglars – thanks to „security-minded“ centre management systems from GEMOS! Efficient anti-theft protection is the best advertisement for every shopping centre. Offences such as pickpocketing or breaking into the car of customers require immediate action, and this is where GEMOS provides the optimum solution. Thanks to the intuitive GEMOS user interface and with the different security installations being networked, it is a piece of cake to trace thieves virtually on the GEMOS floor plan and to take appropriate measures. Announcements can be made in specifically selected zones by means of an electroacoustic installation connected to GEMOS. GEMOS See page 100 23 System solutions for airports and railway stations Technical safety and security combined with elegance For details of our latest reference projects, please visit www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 2 01-20 00 24 Window technology Reassuringly quiet – The DUCOMAX sound absorbing ventilator There is always a lot of noise around airports and railway stations, which is why the quality of the ventilation installations becomes such a crucial factor. All too often, the systems required to cater for people’s desire for fresh air are just another source of noise along with the traffic. But it doesn’t have to be like that: The DUCOMAX sound absorbing ventilator provides a regulated form of ventilation that uses no energy. Used in conjunction with conventional soundproof windows, it turns interior areas into a haven of peace and calm. The air supply can be controlled in accordance with requirements. As a thermally broken component, the DUCOMAX sound absorbing ventilator ensures optimum thermal insulation. The fact that the ventilator is supplied as a complete element means that it is also extremely easy to install. DUCOMAX sound absorbing ventilator See page 55 Door technology Multiple advantages in one system – Escape route concepts in accordance with EN 1125 Safety and security are both top priorities when it comes to planning airports and railway stations. In the event of danger, people need a guaranteed escape route out of particular areas. On the other hand, having lots of open doors would allow uncontrolled access, which is not acceptable. The necessary flexibility can be achieved by combining specially harmonised products. These take the form of our panic systems to EN 1125 and compact BKS escape door control to EltVTR. The data packet of an individual escape door can be linked with other doors via the BKS NET interface, which allows to control all doors and visualise their statuses centrally on a touch panel, e.g. at a reception desk. FT-NT10 escape door control See page 60 Automatic entrance systems Curves in all the right places – The CMR curved sliding door User-friendly access is particularly important in the case of buildings that receive a lot of visitors. The major challenge here is to meet all the various requirements that are associated with the entrance door. In addition to ensuring easy passage, other key factors include creating an aesthetic appearance and sense of elegance. Ultimately, visitors should feel welcome as soon as they approach the entrance door. The CMR-F curved sliding door makes for a generously proportioned and easily visible entrance, which creates a bold statement. This access doorway, which is approved for emergency and escape routes, not only boasts a sophisticated design, but also offers the advantages of energy-saving operation. CMR curved sliding door See page 90 Building management systems Security for people in motion with GEMOS In airports and railway stations there is movement around the clock 365 days a year, people come and leave. With GEMOS, security control centres are able to manage the flow of huge masses and always stay on top of things. More than 400 different GEMOS interfaces allow for the creation of seamless migration concepts. Failure prevention is guaranteed by the GEMOS redundance module, a hot standby server allows to carry out extensions or alterations and to remedy errors even when the system is in operation. GEMOS See page 100 25 Emergency and escape routes – The ultimate in personal and property protection Safeguarding human life and protecting the people inside a building against hazards are always the top priority. This applies regardless of the type of building involved: Whether it is a question of children, the elderly, patients, visitors, people with disabilities or customers – in the event of danger, everyone needs to be able to leave the building quickly and unharmed. As people try to get out of a building in an emergency, they will have to negotiate a number of windows and doors. In this kind of situation, the windows and doors will need to fulfil their purpose of protecting human life and allowing people to escape from the building, which is quite different from the kind of role that they are normally required to perform. However, in addition to the essential criterion of allowing people to escape from the building, many architects, planners, builders and occupants are faced with other legitimate issues: What about aesthetic and design requirements? Solutions from the Gretsch-Unitas Group are sure to keep you on the right track One system for different requirements. All the products from the security-related door and window equipment ranges are intelligently coordinated to ensure that all requirements and wishes are catered for. Not only does the Group ensure compliance with the currently applicable standards, but focuses on technical innovations as a way of ensuring optimum solutions. Advice and planning services are offered early on so that rapid-response door functions can be integrated in a cost-effective manner. ARCHITECT´S-H TLINE +49 (0) 20 51 - 2 01-20 00 What about security against intruders? What about barrier-free and convenience requirements? What about fire and smoke protection? What about security equipment such as access control and monitoring systems? What about power failures? 26 31 Emergency and escape routese – The ultimate in personal and property protection Fire protection suitability Approved for use on fire and smoke protection doors Escape door suitability Tested emergency exit devices (EN 179) and panic exit devices (EN 1125) Barrier-free concept Avoidance of barriers and obstacles when designing and configuring access points and interior spaces RC-tested in accordance with EN V 1627–1630 Resistance class RC 2 Protection against burglars Tested to EN V 1627 – 1630; hardware systems coming in different burglar resistance classes to meet individual protection requirements; product testing and certification to VdS guidelines (enterprise of the German insurance industry) 1 Escape doors and RWA systems If people need to escape through the attic and via staircases, they will have to pass through areas that run next to smoke points. However, this is no problem at all with smoke and heat exhaust ventilation systems from the Gretsch-Unitas Group, which can eliminate hazardous smoke and fumes quickly and reliably. Even doors themselves can be integrated into RWA systems. These open (in obvious contrast to fire protection doors) to allow optimum smoke extraction from a building in a targeted manner. RWA 2 Escape doors on staircases with hold-open devices It’s a problem that everyone has come across: The everyday nuisance that results from the need to have self-closing doors in staircase areas. If people have both hands full, are queuing up to get through the door or are disabled, how are they supposed to manage unless the door is open? That is precisely why the Group’s hold-open devices can be equipped with any kind of door closer in conjunction with electromechanical locking systems. In the event of fire or smoke, smoke detectors ensure that these doors are closed reliably, but the doors also feature panic locks so that they can still be opened from the inside at any time if someone needs to escape. CE marking Compliance with the directives allowing the free movement of goods within the EU 5 AutSchR Automatic sliding doors Directive on automatic sliding doors along emergency routes EltVTR Electronic escape door systems Directive on electric locking systems for doors along emergency routes 3 Panic door and access control For security reasons and to control the flow of people through the building, lots of doors need to be fitted with electronic access control systems. The Group’s access control concept satisfies the requirements in terms of mechanical escape route compatibility. As a result, all the electronic and mechatronic products relating to access control can be combined with the emergency exit devices in accordance with EN 179 and panic door exit devices in accordance with EN 1125. Moreover, these doors can be provided as both single-leaf and double-leaf versions. 6 Locks and hardware Assessment directive for the issue of SKG (NL) product certificates for burglary prevention measures Hold-open devices Tested and certified in accordance with EN 1154 and EN 1155 RWA Smoke and heat exhaust ventilation systems Safety based on natural smoke evacuation DIN 18650 Automatic door systems Safety at automatic door assemblies 4 Emergency exit door and electronic escape door safeguard Who on earth would want doors to open in an uncontrolled manner and at any time? That would create security risks and it would be impossible to monitor the door situation. However, the Group’s electronic escape door control can offer a secure solution: On the one hand, it prevents misuse (which is signalled by means of a visual and audible alarm) and on the other, the electronic lock can be deactivated at any time by pressing the emergency button, thereby allowing the door to be opened mechanically without any problems. Naturally, authorised persons can use a key switch or access control system to pass through the door without triggering an alarm. Resistance class RC 2 Windows Burglar-inhibiting building products to EN V 1627–1630 27 EltVTR 28 8 7 5 Emergency exit door and master key system It must also be possible for locked emergency exit doors to be opened so that people can escape in the relevant direction. The Gretsch-Unitas Group offers intelligent lock technology that does not require the use of a cylinder with free-wheel function; electronic cylinders, which provide high levels of flexibility and security, can even be combined with panic locks without any problems. 1 2 6 Escaping through the window In a worst-case scenario, both the primary and secondary emergency routes could be blocked in the event of a fire. In an emergency such as this, the only option is to escape through the window. In practice, ground-level windows can be used as a secondary emergency route, but windows that are higher up should only be used in truly exceptional cases. Under normal circumstances, windows should offer high levels of protection against burglars. This is ensured by means of the patented central lock and fully closing mushroom pin. Nevertheless, in the event of danger, this security window can be opened by hand, allowing you to escape from the building via ladders and rescue nets whilst following the instructions of the fire service, for example. 3 4 9 Barrier-free escape route It also needs to be possible for those with physical disabilities to leave a building quickly, safely and without any problems in the event of danger. Wheelchair users, in particular, require wide doors that are easy to open. This is achieved by using automatic swingdoor drives, which rely on a sensor strip to detect people as they approach and which open the door safely. According to DIN 18650, any potential danger areas associated with the door now need to be secured, e.g. potential pinch points and the door’s swivel ranges. Even when doors are locked, someone who is in danger can still escape from the building at any time by pressing the illuminated emergency pushbuttons. DIN 18650 EltVTR Resistance class RC 2 7 Escape route and automatic sliding door An automatic sliding door makes for an attractive and practical building entrance. It saves space and is highly effective. But how is it possible that the escape route remains accessible, even when the door is locked? What happens if the radar motion detectors are deactivated? This is when the directives AutSchR and EltVTR come into play. In compliance with these, our type-tested escape sliding door HM-F FT enables to push open the sliding panels in the direction of espace upon actuating the escape door controller FTNT 10. The particular approval by a construction supervisory board is not required. DIN 18650 AutSchR EltVTR 8 Panic door and burglary-resistant entrance door with access control The message conveyed by a panic bar or touch bar installed crossways above the door leaf is immediately clear: Use this to exit at any time. Just a little pressure is all that is required to immediately release the door, even in the case of the G.U-SECURY Automatic safety lock with multipoint door lock. However, you would be mistaken if you thought that the door remained open once released. The door shuts and locks again completely, thereby meeting the highest burglary resistance standards. From the outside, the door can be opened using purely mechanical means via the access control (or by the fire service in dangerous situations). 10 9 10 Escape route involving a revolving door Few types of door know how to make a statement that is as bold as that of a revolving door. However, this door does not just stand out on account of its striking appearance, but manages to combine various other useful qualities such as the prevention of draughts, the possibility to install a central showcase, night-time locking, etc. When the door forms part of an escape and emergency route, the revolving doors used should have a diameter of at least 3600 mm and an appropriate EC type-examination certificate. In view of the additional requirement for a barrier-free concept, the optimum solution is to have swing doors located on both sides as described under Situation 9. DIN 18650 RC-tested in accordance with EN V 1627–1630 29 30 Window technology Technical safety and security combined with elegance 32 As far as we are concerned, modern window technology is all about meeting the challenge of catering for the traditional requirements of security and watertightness whilst at the same time satisfying contemporary demands for heat insulation and aestheticaly pleasing design. Userfriendliness (which is particularly important to the elderly) and locking monitoring systems for burglar alarm systems are some of the issues associated with the area of window technology. In order to achieve a comfortable indoor climate with modern window technology, the windows not only need to boast an excellent level of watertightness, but it is extremely important to have an intelligent ventilation system: for example, integrated slit ventilation ensures an adequate supply of fresh air and creates a sense of well-being within the room. Contemporary architecture often goes hand in hand with the desire for a sense of complete openness and transparency: Despite the fact that balcony-doors are constantly increasing in size, they still need to be easy to open and remain secure at all times.With our technically innovative solutions such as the HS-Master and HS-SPEED Limiter, ease of operation is ensured even in the case of large and heavy door leaves – along with a high level of security. All our window technology can be integrated into a building‘s security equipment concept: We offer life-saving smoke and heat exhaust ventilation systems (RWA/SHEV) in conjunction with convenient ventilation and wind/rain sensor components. Table of contents Parallel offset / Projecting top-hung hardware ....... Page Tilt&Turn hardware ........................................................ Page Tilt&Slide hardware ....................................................... Page Lift&Slide hardware ....................................................... Page HS-Master motor-driven Lift&Slide hardware .......... Page Fold&Slide hardware ..................................................... Page Horizontal-Pivot / Vertical-Pivot hardware ............... Page Window turn handles .................................................... Page Thresholds ....................................................................... Page RWA- / SHEV systems ................................................... Page Modern ventilation systems......................................... Page Fanlight openers ...................................................... Page Spindle drives ........................................................... Page Chain drives .............................................................. Page Window ventilators ................................................. Page Sound-absorbing ventilators ................................. Page 34 36 38 40 42 44 45 46 47 48 50 51 52 53 54 55 For detailed tender specifications refer to www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 - 2 01-20 00 33 System solutions for curtain waalls 34 Window technology Parallel offset and Projecting top-hung hardware Complex curtain wall solutions Chain drive detail Stays of parallel off set window Windows in modern curtain wall façades have to fulfill many different requirements. Therefore criteria such as security against burglary and safety against the risk of falling, everyday ventilation, smoke exhaust ventilation (RWA / SHEV), and high sash weights must be considered already in the planning stage. Skilled in the development of innovative opening mechanisms and specialised in every method of façade opening, Gretsch-Unitas has been a competent partner in curtain wall construction for many years. The Group offers complex solutions based on our approved standard products extended with new components. Projecting top-hung hardware – This hardware range comprises a variety of stays providing opening angles from 20° to 50°. Sash heights of up to 2,500 mm are no problem at all; projecting top hung windows with GU stays can be fabricated with all frame materials – timber, PVC, and aluminium. Parallel offset hardware are suited as special solution for sash weights up to 300 kg, opening clearances up to 250 mm, and sash heights up to 3,000 mm. Projecting Top Hung hardware Version Parallel Offset hardware Multisystem Multisystem Aluminium, Timber, PVC Aluminium, Timber, PVC Sash weight max (kg) 180 200 Sash height (mm) 267 – 2500 380 – 2000 Hollow dimension (mm) 17 + / -1 21 + / -1 Handle version SPACIO Standard / SPACIO lockable / SPACIO removable and other customary handles SPACIO standard / SPACIO lockable / SPACIO removable Window technology 35 UNI-versal principlee 36 Window technology Tilt&Turn hardware UNI-JET C-CONCEALED: The concealed hardware variant for aluminium windows Façade element Tilt&Turn window The UNI-JET Tilt&Turn hardware versions are suitable for Turn-Only and Tilt&Turn round arch head and oblique angle head windows. Greater convenience – The automatic locking cam Cleverle adjusts to the rebate clearance of its own accord, thus compensating for fabrication tolerances. wood. The hinges available as part of our aluminium range are anodised or can be painted in RAL shades. Greater security – Unseen but secure hardware. Different resistance grades up to BRG 2 can be achieved just by using different strikers. All locking points are equipped with steel mushroom cams. This impressive security feature can even be retrofitted. Greater quality – Optimum corrosion protection thanks to surface sealing with ferGUard*silver. Greater appearance – The new variant UNI-JET SC is a completely concealed hardware system allowing the design of the window to come into its own. Greater range of colours – UNI-JET covers are available in many different shades to help you find the perfect match for the Tilt&Turn hardware UNI-JET M UNI-JET S UNI-JET D Version Timber Timber Aluminium For sash width (mm) 280 – 1600 280 – 1600 280 – 1600 For sash height (mm) 350 – 2800 350 – 2450 Max. leaf weight (kg) 150 Galvanised parts with corrosion protection in the form of ferGUard*silver surface sealing Automatic cams Cleverle for optimum rebate clearance Version for Tilt&Turn sash UNI-JET C JET AK8 Aluminium Aluminium 420 – 1400 280 – 1600 355 – 1700 350 – 2450 350 – 2450 350 – 2450 500 – 2400 130 100 130 80 + 130 80 + 130            Version for pitched window                Resistance grade on the basis of various strikers up to WK 2 WK 2 WK 2 WK 2 WK 2 Enhanced surface protection with the finish faceGUard    Version for arched window UNI-JET SC Timber and PVC  Window technology 37 Conveniencee and elegance 38 Window technology Tilt&Slide hardware Tilt&Slide carriage Tilt&Slide balcony-doors in the conservatory, interior view Barrier-free living with the GU-966/100 oZ bb Tilt&Slide hardware system Greater convenience – A technology that has proven itself time and time again and which is reliable to use. All functions can be easily controlled by means of the ergonomically shaped operating handles. There is a special device to prevent maloperation, which ensures problem-free operation for the user. king aid, and to all who appreciate special comfort. When installed with the GU DKS threshold, this hardware system meets the requirements to DIN 18040. It is usable with all standard timber and PVC profiles (pattern A). Greater protection – All Tilt&Slide hardware components from the Gretsch-Unitas Group are permanently sealed using ferGUard*silver surface protection. Even greater convenience – The GU-966/100 oZ bb flush-with-floor hardware system for Tilt&Slide elements provides extra convenience for children, the elderly, users of a wheelchair or wal- Greater security – A custom security concept can be provided for timber and PVC Tilt&Slide elements based on three security classes. Special security components provide burglary resistance all the way round. Tilt&Slide hardware GU966/200 mZ GU966/150 mZ GU968/200 mZ GU968/150 mZ GU966/150 oZ GU968/150 oZ GU966/100 oZ bb GU90 oZ Application PVC/timber PVC/timber Aluminium Aluminium PVC/timber Aluminium PVC/timber PVC/timber/ aluminium Sash rebate width (mm) 720 – 2000 720 – 1600 740 – 2000 740 – 1600 640 – 1600 600 – 1600 640 – 1600 640 – 1600 Sash rebate height (mm) 820 – 2370 820 – 2370 895 – 2400 895 – 2400 700 – 2350 730 – 2400 700 – 2350 700 – 2350 Max. sash weight (kg) 200 150 200 150 130 130 100 90 2 or 4-part version       2-teilig                Magnetic switch for locking monitoring allowing the connection of alarm systems         With power control                             Small and lightweight window elements Basic security Enhanced basic security EN V 1627–1630 Galvanised parts with corrosion protection in the form of ferGUard*silver surface sealing Turn handle for all operating functions, lockable Turn handle for all operating functions, lockable      Window technology 39 Space and light 40 Window technology Lift&Slide hardware awarded by the architectural journals AIT and intelligente Architektur at the Bau 2009 trade fair Lift&Slide balcony-doors as a part of the façade construction Lift&Slide balcony-doors in the living area Lift&Slide night vent Lift&Slide hardware from GU is suitable for windows and balcony-doors made from timber, PVC and aluminium. fresh air supply, this can be easily achieved with the night vent tested to burglar resistance grade BRG 2 (WK 2). The ventilation grid features an insect screen and is suited for use with various profile systems. solutions are available with our modular threshold systems GU-threshold 47, GU-timberstep, and GU-flatstep. Greater care – The optionally available HS-SPEED Limiter stops the sash from accelerating during opening and closing. This prevents injuries as well as damage to the building and items of value. The HS-SPEED Limiter is suitable for Lift&Slide windows and balcony-doors made from timber, PVC and aluminium. Greater ventilation convenience – If guests are keen on having a measured Greater ease of use – Even window or door elements that are particularly heavy can be opened and closed easily using considerably less operating force. Greater warmth – When used in combination with the GU-thermostep threshold, this hardware enables exceptional thermal break properties to be achieved between the building’s exterior and interior. In addition, the Lift&Slide hardware system is suitable for use within the context of “barrier-free living” concepts. Alternative Greater individuality – Custom ventilation combined with high levels of operating convenience. The compact drive system is supplied pre-assembled and made-tomeasure. Lift&Slide hardware HS GU-934 HS GU-937 HS-SPEED Limiter Application PVC/timber/aluminium PVC/timber/aluminium PVC/timber/aluminium Lift&Slide hardware Door opening type       Sash width (mm) 700 – 3300 700 – 2200 Sash height (mm) 850 – 2765 850 – 2765 2765 Max. sash weight (kg) 300 150 300 2 to 6-sash elements Turn handle with profile cylinder hole, aluminium, stainless steel, brass polished, optional         Removable turn handle, available in aluminium, stainless steel or brass polished versions, optional   Can be used within context of “barrier-free living”*   Can be expanded using the HS-SPEED Limiter to ensure operating safety in the case of heavy elements   Window opening type Galvanised parts with corrosion protection in the form of ferGUard*silver surface sealing Can be combined with the GU-thermostep threshold for thermal break properties * For use within the context of “barrier-free living”, special version with extended door handle also available. Thresholds HS GU-934 HS GU-937  3300 GU-thermostep GU-Schwelle 47 GU-flatstep GU-timberstep         Installation height (mm) 67 47 22 22 Height of roller track (mm) 5, 10, 15 5, 10, 15 5, 10, 15 5, 10, 15 Window technology 41 Sheeer effortlessn ness 42 Window technology HS-Master motor-driven Lift&Slide hardware HS-Master on façade HS-Master CONCEALED HS-Master pattern C when open Greater convenience – Individual ventilation with a high degree of operating comfort due to the system being motordriven: lifting the sash, moving it to the desired opening width, and closing is as easy as anything. The options of actuating the HS-Master range from operation by handle or pushbutton switch right through to radio or radar sensor remote control. Greater opportunities – Existing Lift&Slide doors can easily be upgraded by retrofitting the HS-Master drive. Greater innovation – The variant HS-Master CONCEALED is engineered to discretely disappear into the frame profile of the door element, thus meeting the highest demands with regard to design and appearance. The complete system including all safety components is tested by DEKRA, the proven benefits of the standard HS-Master type remain unchanged. Greater design aspiration – Except for the handle, the complete hardware mechanism is concealed; the drive system with its installation height of merely 100 mm is fastened to the element without reaching into the clear opening. Thanks to its slim appearance, the HS-Master Lift&Slide hardware system beautifully harmonises with the living room ambiance wherever installed. Greater certainty – HS-Master products are DEKRA-type-tested. Greater warmth – When used in combination with the GU-thermostep threshold, this hardware enables exceptional thermal break properties to be achieved between the building’s exterior and interior. Greater versatility – HS-Master drives are highly suitable for all public buildings such as schools, hospitals, rehabilitation clinics or care facilities. HS-Master products are DEKRA-typetested HS-Master motor-driven Lift&Slide hardware HS-Master * HS-Master, Schema C * HS-Master CONCEALED * Application PVC/timber/aluminium PVC/timber/aluminium PVC/timber Sash width (mm) 950 – 3300 950 – 3300 950 – 3300 Sash height (mm) 1855 – 2765 1855 – 2765 1855 – 2765 Max. sash weight (kg) 300 300 300 Installation height (mm) 100 100 standard Handle and rocker switch actuation                       Wireless remote control Load interruption Radar sensor, optional Sensitive speed and force regulation Advanced security modules (light curtain, light barrier), optional Upgrading of existing Lift&Slide doors with GU-933 hardware Can be used within context of “barrier-free living”* *   Window technology 43 Fold&Slide hardware Fold&Slide element, partially open Fold&Slide element, closed Folding sashes moved to the side require little space Fold&Slide hardware is suitable for all major materials such as timber, timber/aluminium, PVC and aluminium profiles. Greater individuality – Depending on the sash configuration pattern, up to 7 elements can be connected. In addition, a Turn-Only sash can be integrated, which is operated independently and which enables custom room ventilation to be achieved in the optimum manner. Greater ease of use – Using the elements is child’s play thanks to the castors with ball bearings. They can even be moved using just one hand. Greater precision – Fold&Slide hardware boasts sophisticated technology and precise functional properties. They are also straightforward and convenient for users to operate. Greater freedom – To enable barrier-free use, a butt-joint guide can be provided in the floor (optional). Fold&Slide hardware GU-922 GU-925* GU-822 GU-825* Application PVC/timber PVC/timber Aluminium Aluminium Sash rebate width SRW (timber, PVC)/sash width (aluminium), mm 400 – 900 400 – 900 400 – 1000 400 – 1000 Sash rebate height SRH (timber, PVC)/sash height (aluminium), (mm) 850 – 2350 850 – 2350 730 – 2350 730 – 2350 Max. sash weight (kg) 80 80 80 80 3 to 7-part version       Bottom-running Fold&Slide elements Top-running Fold&Slide elements, optional Butt-joint guide in floor *  44 Window technology     Horizontal pivot hardware, vertical pivot hardware Round Horizontal-Pivot window Horizontal-Pivot window, external view Vertical-Pivot hardware Greater comfort and convenience – Horizontal-Pivot hardware is the key to ensuring perfect ventilation and can be easily operated by hand. Greater strength – Heavy window sash weights of up to 300 kg (Horizontal-Pivot hardware) and 175 kg (Vertical-Pivot hardware) make it possible to use special glass for heat insulation and burglary resistance measures. the available space on the window sill can be utilised. This advantage is particularly important for kitchens or offices. Greater transparency – The fact that the windows can perform a 180°-pivoting motion means that the outside of the window can be conveniently cleaned from the inside. Greater design freedom – One of the plus points of using Vertical-Pivot hardware, as opposed to Horizontal-Pivot hardware, is its eccentric bearing. As a result, interior design requirements can be perfectly implemented. Greater amounts of daylight – Large sash dimensions and opening widths let daylight come flooding into the rooms. Greater amounts of space – The fact that the windows pivot outwards means that all Greater safety – A 22° lock maintains the window sash‘s opening width. Horizontal-Pivot hardware UNITAS 5 Bo UNITAS 7 Bo UNITAS 10/22° UNITAS 4 (circular window) UNITAS 16 UNITAS 18/3 Timber Timber Timber Timber Kunststoff Metall Max. leaf weight (kg) 175 175 300 100 175 175 Horizontal pivot, screw-on (non-ferrous metal)     Application For sash rebate width (mm) For sash rebate height (mm) Sash rebate diameter 424 – 2016  UNI-JET central locking system     Min. sash thickness (mm) 56 68 68 68   Sash rebate (mm) 11 / 4 / 11 11 / 4 / 11 11 / 4 / 11 15 / 4 / 15 Hardware axis 15 20 20 15     Horizontal pivot, mill-in (sectional steel) Integrated, adjustable sash brake    Euro groove 15/20 mm Concealed locking system  Vertical-Pivot hardware Application UNITAS 93 Bo Typ C UNITAS 93 Bo Typ D UNITAS 88 Typ C UNITAS 88 Typ D Timber Timber Metall Metall Sash width (mm) 782 – 1600 600 – 1600 upon FB 870 upon FB 600 Sash height (mm) 1250 – 2350 1250 – 2350 upon FH 1220 upon FH 600 Max. leaf weight (kg) 175 175 175 175 Vertical pivot, screw-on (non-ferrous metal) Concealed locking system             Position of handle at the bottom on the side at the bottom on the side Integrated, adjustable sash brake Window technology 45 Window turn handles FORTE window turn handle ANDANTE window turn handle OFFICE window turn handle GU-BKS window handles are checked on an ongoing basis to ensure correct functioning. The checks involve durability tests and static load tests that simulate the stresses and strains of a window handle’s life. The test results achieved by these window handles exceed the requirements of RAL-RG 607/9. Visually speaking, a key advantage is the fact that the window handles perfectly match the door handles. The products are suitable for universal use in any type of building. These stainless steel window handles are bound to impress with their bold shape and clean lines. They are a delight to hold and easy to operate. Stainless steel window handles Compatible with handles for narrow stile doors Compatible with handles for timber and steel doors Satin finish stainless steel version 90° detent FORTE * ANDANTE * OFFICE *             Rosette lugs (mm) 10 10 10 7 mm square spindle, projecting (mm) 30 30 30 Clip-on cover rosette    Handle dimensions *** (W x H in mm) 56 x 125 60 x 141 65 x 140 For matching door handles see page 70! Aluminium window handles DIRIGENT ** ADAGIO ** MODENA ** SOPRANO **                 120 x 69 125 x 57 Narrow stile set        Handle dimensions *** (W x H in mm) 140 x 54 123 x 58 Powder-coated Painted Lockable (optional) 10 mm lugs Oval rosette version * Stainless steel interior and exterior handles for windows and patio doors made from timber, PVC and aluminium. ** Silver, champaign colour, gold, light brown, dark brown, white (RAL9016), titanium painted *** Non-lockable version 46 Window technology Thresholds Tilt&Turn threshold for „barrier-free living“ Threshold – Thermal characteristics GU system threshold In accordance with the “barrier-free living” requirements stipulated by DIN 18040, the rise height of door thresholds must not exceed 20 mm. The thresholds supplied by GU fulfill this requirement and therefore allow for living with great comfort. All threshold versions are thermally broken. The large widths of the insulating PVC profiles prevent condensation forming inside and offer best thermal insulation. With new buildings, extension profiles can be clipped in to compensate for the height difference in relation to the bare floor. The system-specific closing profile with finseal brush forms a second sealing layer keeping the threshold safe from driving rain, moisture, dust and draughts. This keeps the threshold safe from driving rain, moisture, dust and draughts. Not only GU strikers can be mounted on GU thresholds but strikers from all the leading manufacturers of Tilt&Turn and Turn-Only hardware. GU strikers are flush with the threshold cover, thus leaving the height of 20 mm uninterrupted. They are suitable for use with timber and PVC elements with 9 or 13 mm hardware axis. For the GU System threshold, specific corner drives are available with extended mushroom cams bridging the rebate clearance of 10 mm. They feature the same adjustment and connection possibilities as the standard corner drives. Thresholds: Advantages and applications Threshold, thermally broken Tilt&Turn threshold, thermally broken GU System threshold, thermally broken Application timber/PVC timber/PVC timber/PVC House entrance doors                                Secondary entrance doors Double-leaf doors Other door elements House/secondary entrance doors to DIN 18040 Tilt&Turn balcony-doors to DIN 18040 Especially for outward-opening doors EV 1 anodised, thermally broken with PVC Includes pre-compressed tape Scope for connecting anti-moisture foils Scope for enlargement as far as the rough concrete Extensive accessories Threshold adapters to facilitate efficient handling Optimum thermal insulation Mount for standard closing pieces         Window technology 47 Your reliable friend 48 Window technology Smoke and heat exhaust ventilation systems Flap-out openings with S80-Tandem spindle drives Skylight opening with S80 spindle drive RWA pushbutton HSE In applications where maximum reliability is required of a smoke extractor in the event of a fire and fumes need to be removed quickly, smoke and heat exhaust ventilation systems (RWA) and natural smoke and heat exhaust ventilation devices (SHEV) can be used to open extractor components automatically and in a reliable manner. This protects occupants against smoke poisoning in the event of a fire. At the same time, smoke and heat exhaust ventilation systems can also keep valuable items safe. They consist of the manual (RWA buttons) and automatic (smoke detectors) detection lines, the opening systems (chain drives, spindle drives, etc.) and the control centres. RWA control centres are responsible for supplying, monitoring and controlling all the connected components as well as for ventilation control. The control centres feature built-in batteries so that the systems can still respond to a fire in the event of a power failure for a period of 72 hours. The RWA systems available from the Gretsch-Unitas Group include compact control centres for standard applications (e.g. for extracting smoke and fumes from staircases) and module control centres for customised functions and components. Smoke and heat exhaust ventilation systems Output (A) RZ 2 RZ 5 RZ 10/2 RZ 24/4 RZ 24/8 2 5 10 24 24 Dimensions (W x H x D in mm) 350 x 250 x 120 350 x 250 x 120 500 x 500 x 200 600 x 600 x 250 800 x 800 x 250 Compact (K) / Modular (M) K K M M M Max. RWA groups 1 1 up to 2 up to 4 up to 8 Max. ventilation groups 1 1 up to 2 up to 4 up to 8 Floating signalling contact for forwarding alarm, fault optional optional    Signal input for external alarm optional  optional optional optional Signal input for rain/wind optional optional optional optional   optional Automatic ventilation ‘CLOSE’ optional optional optional optional optional optional Linking of multiple control centres Window technology 49 Modeern ventilation syystem ms 50 Window technology Fanlight openers VENTUS F 200 Tilt-Only window, inward VENTUS F 200, front view, tilt position VENTUS F 200, Tilt-Only window,detail view of opening stay Fanlight opener systems allow everyday straightforward ventilation to be achieved in the case of aluminium, timber, PVC or steel fan lights that are not readily accessible to the user. Greater freedom – Because of their low installation height and flat design, VENTUS fanlight openers are ideal for all applications involving vertically installed rectangular and oblique angle head windows as well as round and segmental arch head windows, where they take up a minimal amount of space. ensures maximum surface pressure on the window, thereby meeting today’s re-quirements for water tightness and energy savings. Greater convenience – The fanlight openers can either be operated manually using hand levers or cranks or they can be automatically and conveniently controlled by means of the ELTRAL electric drive. Greater energy-saving potential – The internal locking device inside the stay Greater security – The surface-mounted additional locking device and several engagement points for the interior central lock provide improved protection against burglars. Fanlight openers VENTUS F 200 VENTUS F 300 Application Timber/PVC/aluminium Timber/PVC/aluminium For Tilt-Only sashes, inward-opening   For Top-Hung sashes, outward-opening  For pitched windows    For segmental arch windows For round arch windows  Sash width (mm) 400 – 3600 620 – 3600 Min. sash height (mm) 250 350 Opening width (mm) 165 – 200 220 – 300 Flatform, surface-mounted   Space requirements with rod, side (mm) 20 26 Space requirements with rod, top (mm) 20 26 Manual actuation via hand lever/cranked handle  Electrical actuation via ELTRAL S drive  Driving rod and cross rod with cover profile Additional locking devices       Max. leaf weight (kg) 80 200 Galvanised parts with corrosion protection in the form of ferGUard*silver surface sealing   Standard colours: EV1-coloured, UC-3-coloured, UC-5-coloured, white (RAL 9016)   Window technology 51 Spindle drives Extraction flaps Skylight opening with S80 spindle drive Modern spindle drives are suitable for use on large and heavy skylights or façade openings. They can be found in shopping centres, theatre foyers, airport terminals or conservatories. With their automated ventilation functions, spindle drives ensure reliable smoke extraction in the event of a fire, as well as providing natural room ventilation and thermal comfort. Skylight opening with S80-Tandem spindle drive ELTRAL spindle drive S80 S160 Tilt-Only sash  Top hung sash  Skylight window     Opening widths (mm), 24 V 300 – 1000 300 – 1000 Opening widths (mm), 230 V 300 – 750 Push force (N) 800 1600 Pull force (N) 800 1600 Current consumption 24 V (A) 1,0 0,7 Synchronous control  Ambient temperature, °C -5° to +75° -5° to +75° Dimensions (L x ø in mm), 24 V Dimensions (L x H x D ø in mm), 230 V (302+travel) x ø 36 (190+travel) x 43 x 76 (302+travel) x ø 36 52 Window technology Chain drives K25 chain drive, tilt-out KS30/40-Tandem chain drive, flap-out K60-Tandem chain drive, tilt-in Electromotive chain drives provide a modern and attractive solution for automatic room ventilation tasks. Greater versatility – The versatile and straightforward installation options mean that chain drives can be installed on inward and outward-opening tilt windows, top hung windows, side hung windows and skylights. Greater technological advantage – The intelligent technology means that the drives can easily be integrated into the existing building management technology system. Greater adaptability – Thanks to their compact, flat design when surface-mounted or the option of concealed installation, they can be perfectly adapted to the window architecture. ELTRAL chain drive KS30/40 K20 K25 K30 K60     Turn-Only window               Opening widths (mm) 110/200/300/400 200/300/400 200/600 200 – 500 250 – 1000 Push force (N) 300 200 250 300 600 Pull force (N) 300 200 250 300 600 Pull force (N) 0,9 0,5 0,8 0,9 1,2 A Synchronous control    Minimum sash height (mm, depending on travel) Tilt-Only sash Top hung sash 250 (Travel 110) 150 (Travel 110) 400 400 200 (Travel 200) 500 (Travel 500) Tilt-Only sash Top hung sash Skylight window 400 400 (only 24 V) 200 (Travel 250) 200 (Travel 250) Ambient temperature, °C -5° to +65° -5° to +75° -5° to +75 ° -5° to +65° -5° to +75° Dimensions (W x H x D in mm), 24 V Dimensions (W x H x D in mm), 230 V 386 x 37 x 59 386 x 37 x 59 335 x 26 x 40 (Travel 200) 335 x 26 x 40 (Travel 200) 560 x 30 x 42 (Travel 200) 456 x 43 x 60 456 x 43 x 60 461 x 40 x 56 (Travel 250) 537 x 40 x 56 (Travel 250) Window technology 53 Window ventilators DUCO adjustable ventilator Cross-section of sound absorbing ventilator Cross-section of DUCO adjustable ventilator DUCO ventilators Adjustable ventilators The adjustable ventilators can be operated by means of levers, cords or rods. They are made from extruded aluminium and are thermally broken to avoid cold bridges. “closed” positions. They are installed in the glazing rebate (above or below the glass) or alternatively in the frame rebate. The GU-DUCOFLAT 100 can even be installed vertically. The flap ventilators can be supplied in three different versions with a 60, 80 or 100 mm glass reduction. be installed in the glazing rebate (above or below the glass) or in the frame rebate. Rotating drum ventilators are available with an 80 mm glass reduction. Flap ventilators Flap ventilators have a closing mechanism involving a double-lip flap, which means that they can only be set to the “open” or Rotating drum ventilators Thanks to a closing mechanism involving rollers equipped with brushes, the rotating drums are steplessly adjustable. They can Permanent ventilators The ventilators are operated by working the inner flap across the entire length. The ventilators are operated by working the inner flap across the entire length. Window ventilators GU-DUCOFLAT 80 GFO Application 80 GF 80 BF 100 GFO 100 GF/GFS 100 BF Flap ventilators  Installation in frame DucoPLUS DucoTON 60 GF 80 GF Flap ventilators Rotating drum ventilator    Installation on frame   Glass reduction (mm) 90 80 Glass thicknesses (mm) 20, 24 20, 24, 28 Installation in glass rebate   Installation on masonry 100 20, 24 20, 24  Connection to glazing at bottom 60 80 20, 24, 28 20, 24, 28, 32 20, 24, 28, 32      Airflow rate (m³/h) at 2 Pa 56,5 61,6 69,5 51,2 Sound reduction factor (open) Dne, A (dB) 27,3 26,7 27,2 26,1 Sound reduction factor (closed) Dne, A (dB) 44,8 41,7 44,3 31,9 Connection to glazing at top  Connection to glazing on side 54 Window technology Sound absorbing ventilators DUCOMAX sound-absorbing ventilator DUCO-SILENZIO sound-absorbing ventilator DUCO-SILENZIO sound-absorbing ventilator Sound-absorbing ventilators positions. They are installed in the glazing rebate (above or below the glass), in the frame rebate or above the frame. In terms of visual appearance, there is a choice of three different terminating profiles for the flap ventilators. There is an external, selfregulating flap to protect against excessive wind pressure. Flap ventilators are available in four different overall depths. DUCO-SILENZIO ventilator for wall mounting With its compressed polyurethane foam, the DUCO-SILENZIO ventilator for wall mounting provides perfect thermal insulation. It is operated by means of a cord on round bolts and can be steplessly adjusted. The ventilator for wall mounting is installed in a thermally insulated tube 200 mm in diameter. It is available in three different designs. Flap ventilators Sound-absorbing ventilators can also be operated by means of levers, cords or rods. They are made from extruded aluminium and are thermally broken. Flap ventilators have a closing mechanism involving a double-lip flap, which means that they can only be set to the “open” or “closed” Sound absorbing ventilators DUCOMAX DUCO-SILENZIO Application Sound absorbing ventilators Sound absorbing ventilators Installation in frame    Installation on frame Installation in glass rebate  Installation on masonry Glass reduction (mm) 135 Glass thicknesses (mm) 20 – 42 Connection to glazing at bottom  Connection to glazing at top Connection to glazing on side Airflow rate (m³/h) at 2 Pa up to 163,1 up to 67,4 Sound reduction factor (open) Dne, A (dB) up to 49 up to 47 Sound reduction factor (closed) Dne, A (dB) Window technology 55 Door technology The door that does it all 56 As far as contemporary door technology is concerned, we are particularly interested in multifunctional project doors: Our approach is based on precisely coordinated door technology which satisfies all the latest requirements. This includes fire protection, burglary resistance, intelligent cylinder technology and mechanical escape route suitability. This technology even allows the door to be held open during everyday use whilst ensuring that it will be safely closed in the event of a fire. The major advantage of a multifunctional door is that it can respond flexibly to new demands and functions. This kind of flexibility is not just important from the point of view of having a form of access control that is capable of constantly adapting to new conditions in accordance with requirements; the multifunctional door also needs to be able to adapt whenever changes of use occur in a building or when the routes through it are altered. That is why escape and fire protection doors, barrier- free concepts, human safety and building security are central to our door technology, alongside the issue of access control. The broad range of aspects covered is not just a one-off occurrence for the Gretsch-Unitas Group, but is the standard approach and is representative of all the versions we produce. The multifunctional door is adept at responding to changes within the building. Taken in conjunction with the services we offer, it epitomises longevity and costeffectiveness. Table of contents Security doors – Multi-point door locks ................... Page Escape door security ..................................................... Page Mechanical and mechatronic locking systems ......... Page House entrance doors .................................................. Page Interior doors ................................................................. Page Push bars, touch bars ................................................... Page Door hardware ............................................................... Page Mechanical locking cylinders ...................................... Page Master key systems ...................................................... Page Mechatronic locking cylinders .................................... Page GU-BKS ACCESS – access control .............................. Page Bathroom door control system ................................... Page Overhead door closers ................................................. Page Floor springs .................................................................. Page Hold-open systems ........................................................ Page 58 60 62 64 66 68 70 72 74 76 78 79 80 82 83 For detailed tender specifications refer to www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 - 2 01-20 00 57 Leaving nothing to chance 58 Door technology Security doors – Multi-point door locks SECURY, series 19 Security-sensitive areas in public buildings such as banks or airports require extra safeguarding which can be provided by SECURY multi-point door locks. Coming in various designs and types, the safety locks are not only suitable for use in projects but also in private residential construction. GU-SECURY – The GU-SECURY safety lock features a protected planetary gear within a lock case, which enables convenient and incredibly smooth operation. Automatic latchbolt SECURY double bolt (DR) The massive bolts or hook bolts of the peripheral locking points feature hardened steel inserts protecting them against being sawn through. GU-SECURY Automatic Accoring to requirements, the safety locks are available with 3 or 5 locking points. SECURY series 19/series 21 multi-point door lock – The SECURY series 19 is equipped with an integrated trigger lever to enable the automatic locking of the 3 latchbolts; consequently, there is no need for an auxiliary latch. This series is suitable for single and double-leaf door systems. Furthermore, the SECURY series 19EK and 21 EK feature electrical coupling and have been approved in accordance with RC 21. GU-SECURY Automatic – Suitable for all buildings that need to be barrier-free, but cannot afford to compromise on security. With the GU-SECURY Automatic version, the multi-point door lock is automatically activated whenever the door is pushed or pulled closed. The GU-SECURY Automatic can be supplied with a motor (A-opener) to enable integration into an access control and it boasts Class A VdS approval. Used in combination with a swing door drive and an electric strike, the SECURY Automatic-Day version allows for immediate door opening when operated in the daytime mode. In nighttime mode, the automatic latchbolts provide enhanced security. The frame side locking bars and strikers are the same for all the lock types from this range. The GU-SECURY range of safety locks is suitable for both single-leaf and double-leaf door systems with timber or steel frames or those of a narrow stile design. This security-tested door technology can be used in conjunction with a block lock or directly for alarm systems. In addition to security doors, potential applications also include fire protection doors, escape doors, panic door systems, and “multifunctional” project doors. Security doors – Multi-point door locks GU-SECURY SH GU-SECURY Automatic SECURY Serie 19 SECURY Serie 21 Application Narrow stile, timber and steel doors Narrow stile, timber and steel doors Narrow stile doors Timber and steel doors 1-leaf doors                         2-leaf doors RC approval (in combination with door) Approval in acc. with EN 179 and EN 1125 Multi-point door lock  No need to lock door manually (self-locking) Fire and smoke protection approval  VdS approval Class A Panic functions E B, C, E B, C, E       35 – 65 55 – 100 External lever handle, electrically couplable (EK) Monitoring contacts (e.g. latchbolt monitoring)    Backset (mm) 25 – 90 33 – 90 A-opener (motor-driven) Door technology 59 The safe way to escape 60 Door technology Escape route security UP TO NOW BY NOW Escape door control unit FTNT 10 Door with customary EVP lock lock and escape door Series 19 opener Door with EVP lock The door is controlled by the escpae door control unit FTNT10 featuring innovative illumination, and in the event of an emergency released either automatically (e.g. through smoke detection) or upon manual operation of the integral emergency button. With the second component of this door concept – the electrically locking panic lock (EVP) – the installation of additional locking elements is no longer required With this locking system, time consuming planning and installation work is a matter of the past. The EVP lock can be installed in any standard DIN lock case and is therefore ideally suited for subsequent mounting, especially in the context of reusing existing buildings. This door concept dissolves the paradox of the apparently contradicting requirements of personal safety in panic situations on the one hand and maximum property security (burglar protection) on the other hand. Requiring nothing more than the supply of voltage, the approach area monitor can be installed above any door. Its sensors monitor an individually determinable area in front of a door. Visual and acoustical alarms with increasing intensity clearly signal the approach of a person. Thus, any attempts to misuse a door are hindered Approach area monitoring from the start and not only when the door is opened as it is the case with escape door security systems according to EltVTR (German directive for electrical locking systems on escape route doors). The installation of the approach area monitor does not require any alterations on the door, and escape routes are not affected in any way. Retrofitting the monitoring system is especially profitable on fire doors and can be carried out by practically everybody. Expert knowledge to start up the monitor is not needed Escape route security Suitable for 1-leaf and 2-leaf doors Freely programmable inputs Freely programmable outputs Fixed, pre-programmed configurations Optional configurations via USB / Software Visualisation via software (optional) Visual and audible alarm Prepared for 27 mm or 31 mm profile half cylinder Stainless steel effect version Alpin-white version Flush-mounted version Surface-mounted installation using separate stainless steel case Further visual and audible alarm transmitters connectable BKS NET compatible Compatible with management system GEMOS Retrofitting without altering the door Start-up to EltVTR possible without expert knowledge FTNT 10 / FTNT 20 Approach area monitoring                        silver colour      Door technology 61 Mechanical and mechtronic locking systems Series 21 for timber and steel doors Series 21 EK with electrical coupling Series 18 for narrow stile doors Any doors that are used along emergency routes must be designed to serve as escape doors. The top priority above all others has to be the door’s escape function, as this can save lives. The major challenge associated with escape doors is the fact that they often have to meet very different sets of requirements simultaneously: In an emergency, the doors need to be able to open quickly, yet exterior escape doors also have to provide effective protection against unauthorised access. The escape door has to master a multitude of aspects by combining emergency and escape routes with barrier-free access but by also being attractively designed to avoid “blots on the landscape”. feature electrical coupling, bring together the benefits of security and reliability. The series 19 products have Class C VdS approval, while the series 21 products boast both Class B/C VdS approval and RC 3 approval. Both series can be integrated into single and double-leaf door systems and, if the version with a multi-point door lock is selected, are also suitable for use as security doors. Series 19 and series 21 – Over and above the life-saving properties of the escape door, the series 19 and 21 locks, which Mechanical and mechtronic locking systems Serie 18 Serie 19 Serie 21 Serie 21 PRIME OFFICE Serie 23 SECURY Serie 19 und 21 Application Narrow stile doors Narrow stile doors Timber and steel doors Glass doors Timber and steel doors Narrow stile, timber and steel doors 1-leaf and 2-leaf doors                     Approval in acc. with EN 179 and EN 1125 Multi-point door lock No need to lock door manually (self-locking) Fire and smoke protection approval  VdS approval, mechanical With locking to the top for tall doors    Panic functions B, C, D, E B, C, E B, C, E Approved in combination with electric opener  External handle, electrically couplable (EK) Motor-driven unlocking     B, C, E B, C, D, E B, C, E        Monitoring contacts (e.g. latch, deadbolt, follower)    Follower to cylinder centres (in mm) 92, 94 92, 94 72, 74 72, 74 72, 74 72, 74, 92, 94 Backset (mm) 30 – 65 35 – 65 55 – 100 55 65, 80, 100 35 – 100 62 Door technology   Mechanical and mechtronic locking systems Radio battery lock, FM10 module Series 21, PRIME OFFICE Locks with monitoring contacts The Group‘s extensive lock range offers a multitude of tailor-made solutions for the most diverse requirements in a project. The point is to make out the appropriate solution to meet the demands placed on the particular door. façades, are achieved with locks from the GU-SECURY Automatic range featuring two additional latchbolts. In certain buildings, particular door lock elements such as latch, deadbolt, follower, or locking cam can be monitored electronically in order to avoid the necessity of using extra electronic contacts for burglar alarm or escape door control systems. In the context of access control where electrically couplable locks (EK) are applied, we boast a special innovation in the form of the radio battery lock designed for use on all-glass and/or smoke and fire protection doors where wiring is impossible. The claim of a project being barrier-free can easily be answered with the use of automatic swing door drives in combination with the motordriven lock variants 1956 / 1959 and the A-opener from the SECURY range of products. For instance, all self-locking variants of the lock series 19 and 21 have established themselves as solution for doors requiring highest burglar protection, since only when the door falls shut or is locked turn the latches into deadbolts. Mechanical burglar protection and closing tightness even for extremely high doors, e.g. in Lock series 19 is the result of consequent development. From standard locks through to innovative motor-driven locks for single and double-leaf narrow stile doors – there is a solution for almost any door situation. One series – one standard lock case accommodating mechanics, electromotor, and electronics Panic lock Panic lock with monitoring contacts EK lock, electrically couplable Important: Despite their different panic functions, none of the lock series from the Gretsch-Unitas Group require a free-wheel cylinder. Motor-driven lock with integral electronics Door technology 63 Cusstom secu urity 64 Door technology House entrance doors GU-SECURY GU-SECURY DR (double bolt) Safe-T-catch operation with turn knob The house entrance door is important from the point of view of welcoming visitors and should make the right impression. At the same time, house entrance doors and secondary entrance doors also need to be equipped with high-quality locking technology, as this is the only way of achieving effective protection against burglars. The GU-SECURY MR 2 and MR 4 products feature two or four massive deadbolts respectively, which are reinforced by means of steel inserts. As a result, the door can be locked at 3 or 5 points across its entire height. In the case of the version SECURY Automatic with A-opener, house entrance doors can be locked automatically, unlocked via motor, and actuated by access control as an option. Insurance coverage with the door just pulled shut – user convenience and burglar protection cleverly brought together. From the point of view of security, the GU-SECURY DR series offers an additional bonus in the form of a mechanical multipoint door lock. This is characterised by its double deadbolt throw: There are two pairs of locking claws/massive deadbolts at the top and the bottom, which throw simultaneously. Thanks to the double locking of the deadbolts, the GU-SECURY DR achieves a tight seal, thereby improving the level of thermal insulation. The massive deadbolts and locking claws prevent the door leaf and frame from being forced apart in the event of an attempted break-in, providing rock-solid security. Additional child safety measures are implemented in the form of a safe-T-catch, which reliably prevents the door from being opened by more than a certain amount. GU-SECURY for house entrance doors Application GU-SECURY MR 2 / MR 4 GU-SECURY Automatic GU-SECURY SH 2 / SH 4 GU-SECURY DR GU-SECURY R 4 Narrow stile, timber and steel doors Narrow stile, timber and steel doors Narrow stile, timber and steel doors Narrow stile, timber and steel doors Narrow stile, timber and steel doors  Automatic latchbolt  Roller cam  Locking claw Massive deadbolt          25 – 90 25 – 90 25 – 90 Double bolt Multi-point door lock  No need to lock door manually (self-locking) Safe-T-catch function Fire and smoke protection approval       VdS approval Class A A-opener (motor-driven)  Backset (mm) 25 – 90 33 – 90  Door technology 65 Attracctive, quiet and sturdyy 66 Door technology Interior doors 0615 1206 Series 13 The primary requirement for interior doors is that they should open and close as quietly as possible. Irritating levels of noise from doors must be avoided. That is why these door systems feature a special slide coating and/or a low-noise crank latchbolt. This makes for a durable system that is maintenance-free and which is particularly suitable for frequent-use applications. Aesthetics also have their part to play: There is a common design thread running through all our interior door systems, ensur-ing consistency even when locking methods differ, such as in the case of toilet doors. The series 13 locks comply with DIN 18251-2 Class 3 for narrow stile door systems and have EN 12209 approval. With a deadbolt throw of 20 mm, the system can be used on both the left and the right. The 0615 heavy-duty mortise lock is suitable for frequently used, heavy project doors in administrative and industrial buildings. With its double-turn deadbolt and 20 mm deadbolt throw, this lock offers enhanced burglary resistance. It features sound damping to ensure that the door locks quietly, which is an essential requirement. Interior door locks 0515 0615 1206 1311 1314 Application Timber and steel doors Timber and steel doors Timber and steel doors Narrow stile doors Narrow stile doors Project mortise lock     Class 3 Class 3    Heavy-duty mortise lock To DIN 18251 Class 3   Class 5 Class 3 or 5 Deadbolt, 1-turn (20 mm) Deadbolt, 2-turn (20 mm)    Profile cylinder lock           WC lock CE marking to EN 12209 Fire and smoke protection approval to DIN 18250 Follower to cylinder centres (in mm) 72 72 72, 74 92, 94 92, 94 Backset (mm) 55 – 100 55 – 100 55 – 100 35 – 65 25 – 65 Door technology 67 Making light workk of opening g so ometh hing g heavy 68 Door technology Push bars, touch bars Push bar B 71xx Touch bar B 7150 Offset push bar The B 7150 touch bar is suitable for heavy escape doors in accordance with EN 1125 that have a maximum leaf weight of 300 kg and a maximum width of 1500 mm. Even in the case of extremely large double-leaf doors, a light press on the touch bar is sufficient to open the entire door element in a panic situation. Even children, elderly people or those with a disability (e.g. wheelchair users) will be able to open the door quickly and safely in the event of danger. The door system will then close automatically behind them. The B 7150 has been approved in accordance with EN 1125 and can be used with narrow stile, timber and steel doors. The touch bar is available in an aluminium or stainless steel effect. tested for 100% reliability by means of a durability test involving 1 million closing operations. The B 71 series has been approved in accordance with EN 1125 and can be used with narrow stile, timber and steel doors. Compliance with the relevant European standard means that proper functioning of the series is assured at all times. Despite the complex lock arrangements, the doors are able to open reliably and close again afterwards. The push bars are available in aluminium, stainless steel or plastic. The series B 71 push bars are ideal for heavy escape doors in accordance with EN 1125 that have a maximum leaf weight of 300 kg and a maximum leaf width of 1500 mm. In the event of danger, they allow the door to be opened quickly and safely. The function of these doors is Push bars B 71xx 5100 B 71xx 5101 B 71xx 5141 Application Narrow stile, timber and steel doors Narrow stile, timber and steel doors Narrow stile, timber and steel doors 1-leaf doors Approval in acc. with EN 1125          Can be combined with door handles in acc. with DIN 18273    Approval for heavy doors weighing up to 300 kg         72, 74, 92, 94 2-leaf doors       Centres in mm 72, 74, 92, 94 72, 74, 92, 94 Black plastic version  Approval for wide doors measuring up to 1500 mm Fire and smoke protection approval Stainless steel gear 9 mm square spindle  F1 aluminium version  Stainless steel version Touch bar B 7150 B 7150 Application Narrow stile doors Timber and steel doors 1-leaf doors Approval in acc. with EN 1125       Can be combined with door handles in acc. with DIN 18273   Approval for heavy doors weighing up to 300 kg         2-leaf doors Approval for wide doors measuring up to 1500 mm Fire and smoke protection approval Stainless steel gear 9 mm square spindle Follower to cylinder centres (in mm) F1 aluminium version Stainless steel version  72, 74     Door technology 69 Hardware for narrow stile doors RR-RONDO door hardware RR-BELCANTO door hardware Our project hardware for fire protection, smoke protection and escape doors is suitable for use as protective hardware with a handle or latch lever function in accordance with DIN 18257 – ES3. All material versions are approved in accordance with DIN 18273 and EN 1906 for use on fire protection, smoke protec- ANDANTE-VK door hardware tion and escape doors that comply with EN 179/EN 1125, and feature the special BKS bearing technology (fixed backplate with friction washer). GU-BKS project door handles are perfectly coordinated with the window handles, making these product series suitable for universal use within any type of building. In addition, this project OFFICE-VK door hardware hardware can also be used in conjunction with panic door hardware. The fact that we can supply a corresponding BKS lock means that we can offer a direct one-stop solution. Naturally, a complete set of installation accessories is included in the scope of supply. Project, fire protection and protective hardware for narrow stile doors RR-RONDO RR-BELCANTO                 Square spindle (mm) 8, 9 8, 9 Approved in acc. with DIN 18273  Approved in acc. with DIN 1906 Class 4 Approved in acc. with EN 179   Approved in acc. with DIN 18257 – ES1 – – Approved in acc. with DIN 18257 – ES2 – – Approved in acc. with DIN 18257 – ES3   Can be used for narrow stile doors Satin finish stainless steel version F1 aluminium version Latch lever set Rosette Short backplate Backplate Special backplate Class 4 For matching window handles refer to page 48! Standard project hardware for narrow stile doors Can be used for narrow stile doors Satin finish stainless steel version Rosette Also available as window handles ANDANTE-VK FORTE-VK OFFICE-VK             Square spindle (mm) 8, 9 8, 9 8, 9 Approved in acc. with DIN 18273    Approved in acc. with DIN 1906 Class 3 Class 3 Class 3 Approved in acc. with EN 179  – – 70 Door technology Hardware for timber and steel doors RONDO door hardware OFFICE door hardware The GU-BKS project door handles combine numerous advantages: They are approved for use in accordance with EN 1906 and can be used as protective hardware in the form of handle or latch lever sets in accordance with DIN 18257 – ES3. Similarly, within the context of narrow stile BAUHAUS door hardware doors they are also approved for use on fire protection, smoke protection and escape doors in accordance with DIN 18273 and EN 1906. The door handles perfectly match the window handles. As a result, these product series are suitable for universal use within any EMMAUS door hardware type of building. GU-BKS project door handles are made from high-quality steel and are characterised by their durability, corrosion resistance, acid resistance, abrasion resistance, environmentally friendliness and high level of safety in terms of human health. Standard project hardware for timber and steel doors Can be used for narrow stile doors Satin finish stainless steel version F1 aluminium version Latch lever set Rosette Short backplate Backplate Special backplate Range includes window handle version Square spindle (mm) Approved in acc. with DIN 18273 Approved in acc. with DIN 1906 Approved in acc. with EN 179 / EN 1125 Approved in acc. with DIN 18257 – ES1 Approved in acc. with DIN 18257 – ES2 Approved in acc. with DIN 18257 – ES3 BELCANTO       – –  8, 9, 10  Class 4 – – –  RONDO          8, 9, 10  Class 4   –  Project, fire protection and protective hardware for timber and steel doors Can be used for timber and steel doors Satin finish stainless steel version F1 aluminium version Latch lever set Rosette Short backplate Backplate Special backplate Range includes window handle version Square spindle (mm) Approved in acc. with DIN 18273 Approved in acc. with DIN 1906 Approved in acc. with EN 179 Approved in acc. with DIN 18257 – ES1 Approved in acc. with DIN 18257 – ES2 Approved in acc. with DIN 18257 – ES3 OFFICE   –       8, 9, 10  Class 4  – –  BAUHAUS   –      – 8, 9 – Class 4 – – – – EMMAUS   –      – 8, 9  Class 4  – –  Door technology 71 Functional and flexible 72 Door technology Mechanical locking cylinders Series 33 SL Because we offer a range of different locking cylinder series for a variety of security and functional requirements, there is a huge range of versions to choose from, not only when selecting locks for doors, but also when looking for any kind of locking and control equipment for use within buildings such as for lifts, roller shutters, cupboards, office furniture, etc. The role played by the keys is more than Series 45 variants just a functional one; they also serve as an important symbol for the high value of architectural hardware used in a building. The vertical keyhole is in line with typical user expectations, thereby ensuring smooth and easy operation. When combined together in a single locking suite, mechanical locking cylinders form a central part of a building’s overall security. Mechanical locking cylinders Series 45 Combination series 31/33 Combination series 50/51      / –      / –                                        Locking methods Single differ locking Registered differ All keys alike Central cylinder system Master key system Grand master key system Functions Normal function Emergency function Free-wheel function Fixing bores Reversible key Miscellaneous features Brass, nickel-plated Dark-browned, optional With anti-bump feature, standard Saltwater-protected, optional Case made from stainless steel Additional side locking bar in the combination Additional spline shaft Drill and picking protection, optional VdS drill and picking protection, optional Changes possible in terms of modules Dust protection, optional      Door technology 73 Multi-dimen nsional solutions 74 Door technology Master key systems Series 45 KeyManager Mechatronic locking system SE Master key systems provide tailor-made security equipment for any building and any requirements. Security cards avoid the problem of unauthorised keys getting into circulation and enable replacement keys and cylinders to be ordered quickly and directly. There is a growing tendency towards systems that combine mechanical locking cylinders with mechatronic and electronic solutions. Such combinations turn master key systems into an extremely cost-effective option. With extremely large and complex projects, it is crucial that locking cylinders and keys are managed in a very precise way. With the GU-BKS KeyManager software, mechanical, mechatronic and electronic cylinders and readers can be managed easily and reliably. Master key systems Series 45 Suitable for mammoth-scale facilities Suitable for large-scale facilities Suitable for small to medium-scale facilities Min. order length of 27 mm with mammoth-scale facilities Patented Unlimited trademark protection Compatible with mechatronic SE cylinders Compatible with electronic SE double cylinders with turn Compatible with wall-mounted SE readers Can be ordered via MasterKeySystem (MKS)* Management via KeyManager Combined use of keys and SE transponders             Combination series 31/33 Combination series 50/51                  * MasterKeySystem see page 105 Door technology 75 Economical and flexible 76 Door technology Mechatronic locking cylinders KeyManager LAN EthernetBuskoppler EBK RS485-Bus SE FM SE FM Offline SE double cylinder with turn knobs Combined use of SE online and SE offline cylinders in one master key system. SE wall-mounted reader The SE mechatronic locking system brings together all the advantages of a mechanical master key system with those of an electronic access control. With this intelligent locking system, the costs incurred as a result of a key being lost or because of the extensive installation and assembly work involved have now become a thing of the past. If keys get lost, they can simply be deactivated. All of the door‘s closing operations are stored in the integrated event memory and can be retrieved by means of a password. No modifications need to be made to the doors prior to installing the mechatronic cylinders. This means that installation can be performed in a matter of minutes. Combining mechanical, mechatronic and electronic products is the key to implementing cost-effective solutions. As far as the end customer is concerned, it is the transponder key that represents the central common element: It can be used to close purely mechanical cylinders as well as electronic ones and also to operate SE wall-mounted readers. Even gates and barriers can be integrated into a single system using the compatible wall-mounted readers. With the GU-BKS KeyManager 3.6 software, all mechanical and mechatronic locking cylinders (including wall-mounted readers) can be managed and programmed via a common interface. Mechatronic locking cylinders SE cylinder Integrated event recorder Can be combined with panic bars in acc. with EN 1125 Recommended for exterior areas that are prone to vandalism     SE double cylinder with turn knobs SE wall reader         Management/programming via KeyManager**   *     Drill protection / variants available with VdS BZ or SKG*** approval   Web-enabled via radio and TCP/IP or RS485           Energy-efficient (number of locking actions per standard battery) 600.000 / 10 yrs. in standby mode 350.000 / 10 yrs. in standby mode – Multilevel low-battery alarm   – Suitable for escape doors Compatible with conventional series 31/33 locking system Compatible with reversible key system Control of barriers, gates and automatic doors Upgradable firmware Flexible time zone management Wireless installation Contactless programming with SE programming device Integral time switch including daytime release        * in combination with BKS lock series 19 / 21 or by using the panic version ** BKS KeyManager see Page 105 Door technology 77 GU-BKS ACCESS – access control C-R P 10/20 card reader B-R P FI006 fingerprint reader Recording of biometric data (fingerprints) It is always good to know which members of a company have which access authorisations – regardless of whether only one door needs to be secured or whether multiple doors are involved. Thanks to the highly flexible GU-BKS ACCESS control, custom security solutions can be implemented at all access points. You are free to choose exactly which features you need to achieve the desired level of security. And even the security technology associated with the access points can be determined in accordance with what you actually want. This could involve the use of a PIN code, a contactless card reader, a fingerprint reader or a combination of all three, as all these options are available as system modules. Once selected, these modules are then integrated using the specially coordinated software. Access authorisations can be issued, expanded, restricted and withdrawn at any time and with immediate effect. Time zones, access areas, access groups and individual access are just a few of the many fields of application covered by the system. GU-BKS ACCESS offers versatile solutions for all requirements. GU-BKS ACCESS – access control C-S P 100 C-S P2000 Application Standalone control Online/offline control For 1 door  For 2 doors 2 doors with TCP/IP For 4 doors 4 doors with TCP/IP Programmable output relay Programmable input relay Danger alarm Double-check principle Anti-passback Time zones Access groups Reports Identification Verification 78 Door technology                  C-C P 4000 Extension board     C-C P/M TCP C-R P TI/20 B-R P FI006 SW P/M PI TCP/IP module Card reader Fingerprint reader Software                                Bathroom door control system 6 1 7 2 8 Door A Door B 3 9 4 10 5 11 1 Door handle on door A 2 Knob cylinder on door A 3 4 External emergency B1196 button behind glass on door A Occupied sign on door A 5 No-passage switch on door A 6 Occupied sign in bathroom 7 Door handle on door B 8 Knob cylinder on door B External emergency button behind glass on door B 10 Occupied sign on door B 9 11 Bathroom accessible from two sides The bathroom door control system is suitable for use in retirement and care homes, hospitals and rehabilitation centres. It provides hygienic and convenient access to bathrooms with two entrance doors. Users are able to access shared wet cells in the standard way without any need for special training or instructions. As soon as one of the doors is locked, the other door is locked automatically. This ensures that users can maintain their privacy. As soon as the no-passage switch is activated, there is no way that one person can invade the other person’s room via the bathroom. There is a visual display to indicate when the bathroom is engaged. As a result, adjacent rooms are able to share the same wet cell without any problems. The bathroom locking system does not require any additional components such as door openers or mechanical locking pieces – all functions are integrated into the lock and No-passage switch on door B there is no need for an external control. This innovative bathroom locking system offers architects flexible design options when planning hospitals or care homes. The wet cells can be arranged more appropriately and the available space can be utilised more effectively. In an emergency, the patient can be assisted from both sides. Bathroom door control system B 5599 Application Bathroom locking system For controlling a wet cell from 2 sides  Lock power supply 12 – 24 V DC Ambient temperature -20 °C to +60 °C Can be supplied by a separate power supply unit 12 or 24 V DC Electrically couplable locks with manually operated deadbolt and deadbolt switching contact       Exterior and interior occupied sign Exterior no-passage switches Exterior emergency buttons Door handle fitting Knob cylinder with red/green indicator Door technology 79 Underrstated elegancee 80 Door technology Overhead door closers OTS 730 FER SRI OTS 730 SRI OTS 730 SRI Our overhead door closers are suitable for interior and entrance doors as well as for fire and smoke protection doors. The fact that they can be conveniently adjusted makes them the ideal solution for any type of leaf, regardless of width and weight. Series 730 overhead door closers are characterised by their understated elegance (no visible fastenings), and their versatile functionality and technology. In terms of the closing function they perform, they ensure absolute consistency, even when the temperature fluctuates. Our over- head door closers are easy to install, are available in a large number of versions and boast a high level of functional reliability. When the OTS 730 FER SRI version of the overhead door closer is selected and used in conjunction with the BMZ 730 H fire alarm centre line and an integrated door leaf coordinator in the gliding rail, you have all the ingredients you need for meeting the requirements of a modern door closing system within the context of a double-leaf fire and smoke protection door. Electromechanical hold-open devices keep the doors open permanently so that people can pass through them easily in everyday situations. In an emergency, the hold-open devices release and the door leaf coordinator initiates the correct automatic closing sequence for the doors. Overhead door closers can be used with door opening and closing angles of up to 180°. Thanks to the steplessly adjustable thermo valves, proper functioning is assured. In this way, the closing speed, latch speed and backcheck can be adjusted in accordance with requirements. Overhead door closers with gliding rail with scissor action arm Crank closer OTS 730 OTS 634 OTS 633 OTS 536 OTS 430 OTS 330 OTS 210 OTS 200 OTS 81 1-leaf          2-leaf (integrated door leaf coordinator)  2-leaf (surface-mounted door leaf coordinator)          Can be used on smoke and fire protection doors F F F F F F Max. door width 1-leaf (mm) 1400 1100 950 1400 1250 1100 1100 1100 1400 Closing force values in acc. with EN 1154 3–6 2–4 3 2–6 2–5 2/3/4 2/3/4 3/4 2 – 5 **** Closing speed Door latching speed                   Delayed closing action optional Backcheck  Adjustment functions optional   optional Hold-open options Electromechanical hold-open device optional optional ** optional ** optional ** Mechanical hold-open device (can be activated/deactivated) * optional optional optional optional optional Adjustable hold-open force (mechanical hold-open device only)   Hold-open angle of between approx. 75° and 150°         any, up to 150° Max. door opening and closing angle 180° 180° 180° 180° 180° 180° 180° 180° 90° or 180°                       optional Mounting options Standard mounting, hinge side Transom mounting, hinge side Standard mounting, opp. hinge side Transom mounting, opp. hinge side * Not permitted for smoke and fire protection doors ** Only with magnetic clamps *** Cannot be activated and deactivated **** According to DIN 18263, Part 1 Door technology 81 Floor springs Floor spring UTS 42 Floor spring UTS 42 on a glass door Installation in a hospital Our floor springs are suitable for all rebated doors and double-action swing doors and are absolutely ideal for all-glass doors. They are extremely versatile as regards installation and adjustment and can therefore be used with many different types of door. As well as offering reliability, our floor springs are highly unobtrusive, which makes for an attractive solution. Their low installation height, and replaceable axles and extensions make them suitable for use with various types of floor. There is scope for longitudinal, lateral and height adjustment between the housing and cement case and this facilitates door assembly. Steplessly adjustable thermo valves ensure consistency in terms of the closing function performed by the UTS series floor springs even when the temperature fluctuates. Our floor springs are compatible with large door opening and closing angles. Latching and hydraulic hold-open devices are used to keep the door open. Floor springs 1-leaf 2-leaf (SRI) UTS 85 F / FE UTS 85 FL UTS 85 HF UTS 42 UTS 50 UTS 60 UTS 840           1100 950 1100 1000 or 1200 Can be used on smoke and fire protection doors F F Max. door width (mm) 1400 1400 1400 Total door width, 2-leaf 1030 – 2800 1030 – 2800 1030 – 2800 Max. door weight (kg) 300 300 300 120 120 170 120 Closing force values in acc. with EN 1154 3–6 3–6 2–6 1–4 3 4 3 or 4 Closing speed                    Adjustment options Door latching speed Delayed closing action Mechanical backcheck Free-wheel   Hold-open options  Hydraulic Fixed (with detent mechanism)   Single-action swing doors, hinge side    Single-action swing doors, opposite hinge side*    Electro-hydraulic           Mounting options Double-action swing doors * With slide arm 82 Door technology   Hold-open systems 1 1 3 4 2 6 5 OTS 730 FER SRI with additional ceiling-mounted detector ORS 142 Schematic view of a hold-open system in accordance with EN 1155 Smoke and fire detection accessories for hold-open systems. In the event of a fire, electrical hold-open devices or holding magnets are disconnected from the mains, thus releasing the door via door closer. 1 Optical smoke switch ORS 142 (ceiling mounting) [1] 2 Optical smoke switch ORS 142 W (wall mounting) [1] 3 Door closer, e.g. OTS 730/730 FER 4 Power supply unit NAG 03 5 Manual release pushbutton 6 Door hold-open magnet [1] DIBt Application directives (DIBt = German Institute of Building Technology) Hold-open systems BMZ 730 H Power supply Release Smoke detector / smoke switch Operation = green Alarm = red Integrated in gliding rail Lintel mounting ORS 142 W ORS 142             NAG 03 NG 519           optional  Ceiling mounting External manual release device connectable  Supply voltage 230 V AC, 50/60 Hz 18 – 24V DC 18 – 24V DC 230 V AC, 50/60 Hz 230 V AC, 50/60 Hz Output voltage 24V DC 24V DC 24V DC 24V DC 24V DC Output current 460 mA 900 mA 350 mA Power rating / Current consumption 21 W 22 mA 22 mA 21 W 8,4 W Protection class IP 40 IP 40 IP 40 IP 30 IP 30 Ambient temperature +5 to +40 °C -20 to +75 °C -20 to +75 °C +5 to +40 °C +5 to +40 °C Door technology 83 Automatic entrance systems Everything you could possibly want in a door 84 Their versatility and elegant appearance are important for any modern building. We are of course talking about automatic entrance systems, which form the focal point of today’s façades by making a bold statement. There are myriad technical features and design options available, so you are bound to be able to find the right system for your requirements. There are some very good reasons why automatic entrance systems have become such an essential part of modern building concepts. They can be used in barrier-free zones as well as within the context of room partition systems and they meet prevailing requirements in sluice security concepts. Precise remote control of the door systems is also possible using centre management solutions. But the guiding principle is always the same: To fulfil all application and design needs whilst also taking account of the most stringent architectural requirements. As a result, entrance systems now go hand in hand with modern architecture. The innovative technology behind the products and large pool of service technicians ensure maximum reliability – even when the systems remain in constant use. Table of contents Revolving doors ............................................................. Page Controlled single-person access ................................. Page Sliding doors ................................................................. Page Swing-door drives .......................................................... Page All-glass systems ............................................................ Page 86 88 90 92 94 For detailed tender specifications refer to www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 2 01-20 00 85 Making a bold statemeent 86 Automatic entrance systems Revolving doors GRA revolving doors GGR large-capacity revolving door GRA revolving door Revolving doors are used for any entrance that is required to make a bold statement about the building or organisation concerned. They are primarily used to provide public buildings, hotels, banks, insurance offices or airports with a striking entrance. One of the key advantages is that the three or four-leaf doors do not create any draughts in the foyer or lobby. A night locking function also prevents the revolving doors from being misused. We offer an extensive product range so you are bound to be able to find the right entrance solution for your application. Because revolving doors offer so much design freedom, all kinds of custom solutions can be devised. Furthermore, the TÜV-tested systems provide the necessary level of security that is required for entrance doors. Revolving doors GRA Revolving door GGG Revolving door Version Standard All-glass GGR Revolving door Large-capacity D (mm) 1800 – 3800 1800 – 3000 3600 – 6200 A (mm) 2100 – 3000 2100 – 3000 2100 – 3000 B (mm) ≥ 175 Glas roof ≥ 300 C 3-leaf (mm) 830 – approx. 1750 approx. 850 – 1370 approx. 1600 – 2900 C 4-leaf (mm) 1220 – approx. 2530 approx. 1220 – 2000 approx. 2400 – 4200 E (mm) ≥ D + 60 ≥ D + 60 ≥ D + 120 Max. no. of persons (per minute) 50 – 90 50 – 90 110 – 170 Automatic entrance systems 87 All-round security 88 Automatic entrance systems Controlled single-person access Security curved sliding door Security revolving door, all-glass version Security curved sliding door Security revolving doors and security curved sliding doors are used whenever a high-security entrance is required. The main applications are banks, insurance offices, ministerial buildings, government buildings, computer centres, industrial sites and office buildings, where such doors ensure the necessary level of enhanced security and convenience. Electronic control systems monitor individuals as they enter the building, ensuring smooth passage in both directions that is carefully controlled. Despite the tight security measures, the entrance is still spacious and conveys a sense of openness and transparency thanks to the large amount of glass. The fact that different profile systems are available means that there is lots of scope for creative design in addition to the high level of security achieved. Security revolving door GSI Security curved sliding door GSI Dimensions of GSI security revolving door (mm) D* A* B* C 3-leaf (mm) C 4-leaf (mm) E 1800 2100 – 3000 350 – 800 ~ 859 ~ 1239 1860 1900 2100 – 3000 350 – 800 ~ 907 ~ 1308 1960 2000 2100 – 3000 350 – 800 ~ 954 ~ 1377 2060 2100 2100 – 3000 350 – 800 ~ 1002 ~ 1446 2160 2200 2100 – 3000 350 – 800 ~ 1050 ~ 1514 2260 Dimensions of GSI security curved sliding door (mm) D* A* B* C E 1000 2100 – 3000 350 – 800 ~ 500 1060 1300 2100 – 3000 350 – 800 ~ 600 1360 1500 2100 – 3000 350 – 800 ~ 700 1560 * Special dimensions available on request Automatic entrance systems 89 Transp parrency on track 90 Automatic entrance systems Sliding doors compactMaster CM / CM-F compactMaster CM / CM-F HM-F FT escape route sliding door Automatic sliding doors provide a modern entrance solution for public buildings, airports, railway stations, shopping centres, banks, hospitals, retirement homes and homes for the disabled. inside a rubber profile to ensure that the doors run particularly quietly during opening and closing. By operating the escape door controller FTNT10, it is possible to swing open the sliding panels in the direction of escape. This way of opening is also ensured if a load is applied on the sliding panels frontally in order to escape. Due to this special feature, the particular approval by a construction supervisory board is not required. With their compact and slimline design and their drive height of just 100 mm, the sliding doors from the compactMaster series do not just provide reliable functionality, but are also extremely attractive and elegant. The running track is cushioned Conflicting standards are reconciled with the installation of an escape route sliding door HM-F-FT which is type-tested in accordance with AutSchR and EltVTR; in the OFF/NIGHT operating mode, this sliding door ensures safe access to the escape route even in locked status. Sliding doors Version compact Master CM / CM-F compact Master CMT / CMT-F compact Master CMR / CMR-F econo Master EM heavy Master HM / HM-F HM-F FT Sliding door compact Telescopic sliding door Curved sliding door Sliding door econo Sliding door Escaping route sliding door For escape routes (-F)      Drive height (mm) 100 110 115 130 130 130 800 – 1250 800 – 1250 800 – 2000 800 – 1300 800 – 1250 900 – 2200 800 – 2500 800 – 2500 1000 – 3000 1200 – 2600 100 80 200 / 160 100 2x LDB + 100 2x LDB + 115 2x LDB + 130                VSG ESG / VSG ESG / VSG ESG / VSG ESG ESG ESG Clearance width, 1-leaf (mm) Clearance width, 2-leaf (mm) Clearance width, 4-leaf (mm) Max. door weight per leaf (kg) 1800 – 3000 120 70 Diameter (mm) Min. drive length, 2-leaf (mm) 2000 2x LDB + 115 1,5 x LDB + 100 Min. drive length, 4-leaf (mm) Stainless steel (ground/polished)     Single glazing with slim profile ESG / VSG ISO glazing with slim profile ESG Choice of RAL colour Anodised Stainless steel effect 1,5 x LDB + 50    ESG Note: For escape routes it is important to observe the passage widths required by the building law. CPW: clear passage width ESG: toughened safety glass VSG: laminated sheet safety glass Automatic entrance systems 91 Barrier-free and extremely quiet 92 Automatic entrance systems Swing-door drives DTR / DTR B swing-door drive Passage area without threshold DTR / DTR B swing-door drive Automatic swing doors provide a modern entrance solution for public buildings. Swing-door drives can be used on aluminium, timber or steel doors. They are compatible with other door components and can be easily coordinated with products from other suppliers. The swing doors in the DTR series run extremely quietly during opening and closing. The hold-open time of single or double-leaf swing doors is step-lessly adjustable and can (with certain versions) be set as high as 60 seconds. In the event of a power failure, the swing door drive closes on the basis of spring force. The automatic swing door drives are the perfect complement to modern glass façades, helping to create an inviting entrance that is easy to locate. Running extremely quietly, the DTR / DTR B drives are suitable for installation in noise-sensitive areas. Swing-door drives DTR DTR B Version Swing-door drive Swing-door drive 1-leaf  2-leaf        For fire and smoke protection doors Particularly suitable for barrier-free applications* Push-open version with scissor-action arm or slide rail Pull-open version with slide rail    Opening electromechanical Spring force closing electromechanical and with spring force Hold-open time, adjustable (in seconds) 60 Sash weight 200 kg with a sash width of 1000 mm Protection class IP 20 *  Automatic entrance systems 93 Perfecct trransp parrency 94 Automatic entrance systems All-glass systems GSW shop front GSW office partition wall GSW service counter area shopMaster GSW-M and GSW-A allglass sliding partitions are ideal for use in shops: They can be used to create tailor-made transparent partition walls and shop-in-shop structures. Solutions can be implemented for practically any floor plan, giving completely free reign to your creativity. Another advantage is the running track’s low mounting height, which makes installation flush with the ceiling possible with practically any arrangement. High-quality castors ensure permanently reliable operation and smooth motion during opening and closing. With the GSW-A version, the all-glass sliding partitions are operated by means of motors that are integrated into each of the elements. Locking and unlocking are also performed automatically via the multifunction button switch. This type-tested control technology limits bump forces to a maximum of 150 newtons, features obstacle recognition and throttles the speed when the partitions are approaching the end positions. In the event of a power failure, the driven panels can also be moved manually. All-glass systems shopMaster GSW-M shopMaster GSW-A Version All-glass sliding partition All-glass sliding partition Manual   Automatic Maximum number of elements on request 32 Travelling speed (mm/s) 50 – 150 Obstacle recognition  Type-tested in acc. with BGR 232, UVV and VDE regulations  Max. element height (mm) 3500 3500 Max. element width (mm) 1250 1250 Max. element weight (kg) 150 150 Possible glass thickness (mm) 10 / 12 10 / 12 Linear running track version Curved running track version    Continuous floor guide optional     Angled running track version Automatic entrance systems 95 Building management systems Where it all comes together 96 There can be no doubt about the fact that management systems have a major role to play when it comes to the security of buildings: all the components that are involved in a building’s technical security systems are controlled from a central location. It is here that all the security-related information converges. This includes data from electronic monitoring systems about entry to the building (access control) and escape from a building (escape door control). In addition, management systems can be used to set up interfaces with other technical equipment. It is even possible to integrate features for managing mechanical, mechatronic or electronic master key systems with the aid of user-friendly software. All the products from the Gretsch-Unitas Group can be fully linked via these management systems, thereby providing optimised control from a central location. Table of contents BKS NET building bus for systems management ............................................. Page 98 Security and building management solution: GEMOS .................................. Page 100 GEMOS access access control system ................................................... Page 100 ArenaControl security and media control system ............................................................... Page 100 For detailed tender specifications refer to www.g-u.com ARCHITECT´S-H TLINE +49 (0) 20 51 2 01-20 00 97 Interactiivee functions Access control system Automatic doors RWA Mechatronic locking systems Mechatronic locking systems FTNT10 escape door control unit Systems management 98 Automatic entrance systems BKS NET building bus for systems management BKS NET compatible products, e.g. FTNT10 Configuration software CF10 Online visualisation tool OV10 BKS NET interconnects the Group‘s electro-mechanical systems by means of modern bus communication, thus ensuring the automatic interplay of functions. Its modern system structure comprises centralised system configuration as well as centralised system monitoring. The main focus is always put on the door as a functional entity. All compatible products are marked with the BKS NET logo label. All BKS NET compatible products can be configured via the uniform user interface of the BKS NET system software. The USB or network connected products are automatically recognised by the CF10 configuration software and can be unambiguously identified due to the integral product images. Great importance has been attached to an intuitive user interface enabling even unpractised operators to configure their products.As an efficient upgrade of the configuration software, the OV10 online visualisation tool allows for the display of floor plans and the realtime visualisation of all door statuses. Doors can be controlled conveniently by mouse click provided the operator has been allocated the corresponding authorisation. The BKS NET control panel is an alternative means of operation. It enables, for example, to monitor and control all escape doors centrally from a reception desk. Its touch-sensitive display is operated with the finger tip – there is no need for a keyboard or a mouse. BKS NET building bus for systems management Automatic configuration of bus participants CF10 configuration software OV10 online visualisation tool BKS NET tablet       Real-time display of door statuses Display of floor plans Local parameter setting for GU-BKS products via USB  Central parameter setting for GU-BKS products via bus/network   Network interface (TCP/IP) to GU-BKS building bus           Modern browser interface (kiosk mode) Defines/switches switching groups Control of GU-BKS products Integral alarm processing Multi-level user rights Multi-user system (client/server) BKS NET interface    Consisting of screen, computer, operating system and software Software product without hardware or operating system           Automatic entrance systems 99 Bundled security tools Fire alarm system (BMA) Burglar alarm system (EMA) Access control system Video monitoring Smoke and heat exhaust ventilation systems (RWA) Communication technology Building management (GLT) Building management systems 100 Automatic entrance systems GEMOS Applications with building management systems Hazard management with GEMOS Access control with GEMOS access Security and media control at arenas GEMOS – The leading harzard management system comprises a product family consisting of software, hardware, accessories and services. Building management, security management, risk management, or facility management are by far not all terms to describe the functions and performances of GEMOS. In fact, the software-based, graphic management platform supports the technical and organisational implementation of hazard prevention of any kind. For the staff responsible on site, the handling of the security instruments in the daily routine must be simple, logical and intuitive. This is reliably achieved by GEMOS through trade-spanning interactions, logical links and an intuitive user interface – even for the control of such complex security installations as, e.g., fire alarm, burglar alarm, escape door control, access control, video, and intercommunication systems. GEMOS access – The access control instrument for small to large applications constitutes the second own-brand product line of ela-soft GmbH beside GEMOS. The field of application of GEMOS access ranges from the small-scale offline access control system through to the modular and fully integrated section of a building security or hazard management system. Free scalability is the basis for the economic application of GEMOS access, regardless of whether it is for small projects or complex large-scale facilities. GEMOS access spans different technical trades involved in the security on and around a door. Accordingly, access control, escape door control, and monitoring systems are linked centrally to the intelligent door module TM-2 and connected with each other via RS485 bus, either with stub lines or in a redundant loop circuit. 128 bit AES encryption of the serial bus is possible as an option.The open interface architecture enables the connection of many customary card readers, e.g. via Wiegand protocol, independently from the applied reading technique (e.g. Legic, Mifare, or Hitag). The core programme and database of GEMOS are based on a software philosophy which has been refined throughout many years of consistent development. Clear menu structures, predefined settings for typical applications as well as hardware recognition assistants allow for fast and therefore economic handling both during installation and operation. Arena Control – Today, the technical equipment in modern sports and multipurpose arenas must meet the highest requirements. This applies particularly to information technology installations. Beside a highly available IT and telecommunication structure and sophisticated security technology, it‘s the media engineering products such as high-performance electro-acoustic loudspeakers and acoustic irradiation installations as well as TV sets in spectator areas which are decisive for a great visitor acceptance. The extraordinary flexibilty owed to the versatile requirements of different events and to the huge numbers of different users demands elaborate planning effort and tremendous technical input. This is where GEMOS offers considerable benefits thanks to flexible software-based networking.Predefineable scenarios for different kinds of events and individual workstation interfaces allow for a high planning security and for important cost savings both when purchasing and operating facility equipment. Automatic entrance systems 101 Planning support Tailor-made solutions 102 Project planning advice Most diverse types of projects Special topics such as, e.g., schools and kindergartens Tailor-made solutions for any project Project planning advice for architects, specialised planners, builders, and general contractors For more than a century, we have been involved with products and technologies, which most people have contact with quite naturally in everyday life, without being aware of their complex importance. In our capacity as developer and manufacturer, we offer system solutions for the opening and moving, closing and locking of windows and doors, as well as for the func-tional and secure management of buildings. planning and building phase. Furthermore, we offer a comprehensive seminar programme including individual events at your premises. Builders appreciate the possibility to assure themselves of the quality and functionality of solutions offered to them in a real situation.Builders appreciate the possibility to convince themselves of the quality and functions of the offered solutions directly on the building. We therefore organise and supervise samplings at the customer‘s building site and gladly present different product variants and functions if requested; another way to experience our products ‚in real life‘ is to visit our worldwide reference projects. functional requirements, elaborating concepts, offering a variety of trade-spanning solutions through to delivering the finished product to your customer. The product and its advantages for human users are at the forefront of everything we think and do.The people who benefit most from this are our customers and finally the end user who expects to obtain for his building a functional, reliable, and sustainable solution. It is on this basis that we have managed to build a worldwide reputation as a reliable partner. Our consulting services Our project planning consultants will be pleased to support you in producing project-specific drawings, door lists, drafts with function descriptions, tenders, and also wiring diagrams. Well thought-out system solutions, all of them adapted for each other, guarantee the aspired and expected functionality whilst taking into account the particular standards and directives. In close cooperation with our development and applications engineering divisions we also work out tailor-made solutions for special constructions. As a matter of course we continuously provide information about new products and innovations as well as on relevant standards and regulations and their immediate consequence for contractors during the The benefits for you and your customers Together with you we determine the different functional requirements in the building and create an individual overall plan. Convenience and security are given the highest priority when it comes to opening, closing, and monitoring doors and windows. In so doing, we do not just concentrate on the individual product, but create overall solutions taking into account trade-spanning interfaces. The requirements of safety and security in a building, protection of life and property, barrierfree living, and operating convenience often conflict with each other. It is our special skill to solve such problems. Our service portfolio ranges from determining Wherever you need us, we shall be there Our Group of Companies is at your disposal in more than 40 countries where we offer points of contact for planers, builders, and fabricators. Short distances and a fast, reliable service make technical and costoptimised solutions possible, perfectly in tune with the needs of the people in their environment. How to reach us in Germany : ARCHITECT`S-H TLINE +49 (0) 20 51 2 01-20 00 Or send an email to: [email protected] Further contact addresses you will find at www.g-u.com 103 Software for planners and building operators TenderingManager AT 1.5 Query result for EVP lock series 21 The GU-BKS TenderingManager is a highly convenient and effective tool for generating complete BOQs comprising all products of the Gretsch-Unitas Group in no time. By being available online without the necessity to install a programme, the tool assists with creating a specification description dynamically which can be completed as an invitation to tender and communicated digitally. The integrated GAEB import function for the formats GAEB81 and GAEB82 enables ongoing tenders to be integrated and edited online. A GAEB Viewer is available, of course. The output formats used are GAEB81, GAEB82, Word, Excel, Txt, Html. So we not only provide single texts but the complete functionality of a tendering programme. Features and functions – Internet-based, therefore no software installation required – No training required – Free, indefinite use – Simple operation and fast collection of item texts – Efficient BOQ editing – Continuously supported tendering process – Functionality of a complete tendering programme – Creation of BOQs comprising all product divisions of the GU Group – Shopping cart function for tendering texts – Item texts supplemented with sketches and product photos – Consistent data exchange format i in accordance with the GAEB-Standard (GAEB = Joint Committee on Electronics in Building) – GEAB import function upload into GU TenderingManager 104 Planning support Shopping cart function – Processing of imported GAEB files – Normal position, home position, instructional text, alternative position – Long text / short text – Moving of text blocks and BOQ texts – Free text position for individual adaptat on and design – Output in the formats GAEB81, GAEB82, Word, Excel, Txt, HTML – Display of imported tenders with GAEB Viewer The GU-BKS TenderingManager can be found at www.g-u.com Software for building users BKS KeyManager MKS MasterKeySystem confiGUrator KeyManager The KeyManager software is the easy and reliable way to manage and control keys for master key systems. If you need to solve a security-related or organisational issue (such as who has been given which key and whether they have returned it, which key fits which doors or which cylinder can be found in which door), then this effective management system can provide you with the exact answer you need quickly. Not only that, but the PC software makes the KeyManager extremely user-friendly for optimum convenience. There is a password-protected supervisor function to prevent unauthorised access. The management software can be used on a standalone basis (single-user version) or networked (even across multiple sites). KeyManager is the first ever software package for managing and programming mechanical, mechatronic and electronic cylinders and readers. A demo version is available free of charge from [email protected]. MKS MasterKeySystem MKS MasterKeySystem is the ideal Internet-based planning and ordering software for master key systems and associated supplementary keys. Above all, MKS will save you time and money. There is no need for slow communication methods such as post or fax, as everything happens quickly and directly. As soon as the order is sent, an e-mail is dispatched to confirm receipt. This contains the order details, locking scheme, BKS order number and the designation of the master key system. The online ordering method offered by MKS even allows repeat orders of locking cylinders to be processed within three working days without any additional charges being applied. Repeat orders of keys are delivered already within 24 hours. The current status of the order can be checked at any time via the Internet. The ordering software offers a number of free services such as the option of downloading locking schemes, making it one of the most flexible and comprehensive systems available on the master key system market. Apart from Microsoft Internet Explorer, Version 5.5 or higher, no additional software is required. If the software is of interest to you, you can register quickly and easily at www.g-u.com. confiGUrator This product configuration tool is used for determining, quoting, and ordering hardware sets and parts lists for windows, doors and automatic entrance systems. Its data are calculated upon the latest prices, conditions, and technical developments. The tool also allows to configure special designs, e.g. oblique angle head, round arched or polygon windows, always taking into account the particular technical restrictions. Furthermore, it configures multi-point locks, fire protection doors, panic and emergency exit devices to EN 1125 and EN 179 regardless of whether it is for narrow stile, timber or steel doors. The ordering convenience arising from the tool‘s integration into the customer information system CIS and last, but not least the op-tion of administering individual quotations and addresses make the confiGUrator an instrument one wouldn‘t do without. Planning support 105 GU worldwide Production Germany: Gretsch-Unitas GmbH Baubeschläge BKS GmbH GU Automatic GmbH ela-soft GmbH France: FERCO International S.A.S. Slovakia: GU Slovensko S.R.O. 106 Sales Albania Argentina Australia Austria Bahrain Belarus Belgium Belize Bolivia BosniaHerzegovina Brazil Brunei Bulgaria Canada Cambodia Chile China Columbia Costa Rica Croatia Cyprus Czechia Denmark East Timor Ecuador El Salvador Estonia Finland France Germany Greece Guatemala Honduras Hungary India Indonesia Iran Iraq Ireland Italy Japan Kazakhstan Kosovo Kuwait Laos Latvia Libya Lithuania Luxemburg Macedonia Malaysia Mexico Moldova Montenegro Myanmar Nicaragua Norway Oman Pakistan Panama Paraguay Peru Philippines Poland Portugal Qatar Romania Russia Saudi Arabia Serbia Singapore Slovakia Slovenia South Korea Spain Sri Lanka Sweden Switzerland Thailand The Netherlands Turkey UK Ukraine United Arab Emirates Uruguay USA Venezuela Vietnam Yemen Image rights / Sources Catalogue cover design: Machwerk GmbH Cover picture: Shutterstock Images LLC The following images have been reproduced with the kind permission of their owners: Landesmesse Stuttgart GmbH, D-Stuttgart Pages 58, 59, 66, 67, 68, 82 Technische Universität Dresden, D-Dresden Pages 29, 30 Altenpflegeheim Königsbrücker Landstraße, D-Dresden Page 45 Mit freundlicher Bereitstellung des Archivs kab planungsbüro für bauleistungen gmbH, D-Stuttgart/Fellbach Page 6 baukunst philipphaus GmbH, D-Untermünkheim Fotograf Oliver Schuster, D-Stuttgart Pages 40, 41 aumüller automatic gmbH, D-Augsburg Pages 23, 28, 48, 49, 50, 52, 53 Scottish Parliament, GB-Edinburgh Pages 36, 37 Glenn Howells Architects, UK-Birmingham, London Projekt Rotunda Birmingham Page 38 Jansen AG, CH-Oberriet Page 39 Tepasse Fenster GmbH, D-Bocholt Page 37 Architekten Albert-Speer und Partner GmbH, D-Frankfurt Fotograf Christoph Kraneburg, D-Köln Projekt Oval am Baseler Platz, D-Frankfurt am Main Pages 72, 74, 76 noblesse gmbh & co. kg, D-76768 Berg Page 64 Publisher Unternehmensgruppe Gretsch-Unitas Johann-Maus-Str. 3 D-71254 Ditzingen Tel. + 49 (0) 71 56 3 01-0 Fax + 49 (0) 71 56 3 01-2 93 www.g-u.com 07/11 – 2014 Edition Printed in Germany 07/11 – 2014 Edition www.g-u.com BKS GmbH Heidestr. 71 D-42549 Velbert Tel. + 49 (0) 20 51 2 01-0 Fax + 49 (0) 20 51 2 01-4 31 WP05005-04-0-1 Gretsch-Unitas GmbH Baubeschläge Johann-Maus-Str. 3 D-71254 Ditzingen Tel. + 49 (0) 71 56 3 01-0 Fax + 49 (0) 71 56 3 01-2 93