Transcript
CONTROL HANDLE GROUP
3
4
19 8
22
1 16
19
5
10 9 15 6
14 2 7
21
18 13 11 20
17 12
5-1
SABER 24V (SS) 98742 10/27/99
CONTROL HANDLE GROUP REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
09129 35220 38275 57047 57113 57247 62726 66293 66301 70129 70245 70302 70351 72093 73913 73938 87029 87068 87090 89186 140247 140248
2 2 1 2 4 2 2 2 2 2 4 4 6 2 2 2 4 12 4 1 1 1
DESCRIPTION
SERIAL NO. FROM
NOTES:
BEARING, 3/4 NYLINER SI GASKET, MICRO SWITCH COVER HANDLE, CONTROL NUT, 1/4-20 HEX NYLOCK NUT, 5/16-18 HEX NYLOCK NUT, PLATE SWITCH MOUNTING PLATE, MICROSWITCH MOUNT PIVOT, HANDLE PLUG, 1.00 HOLE SCR, 1/4-20 X 3.00 HHCS SCR, 4-40 X 3/4 PPHMS SCR, 5/16-18 X 1.00 HHCS GR5 SCR, 10-32 X 3/8 HHTR W/STAR SWITCH, MICRO SPACER, 7/8 OD X .78 ID X 1.375 L SPRING, EXT. .5D X 2.75L X .075W WASHER, 5/16 X 3/4 SS WASHER, 1/8 RIVET BACKUP WASHER, 1/4 X 3/4 FLAT WELDMENT, TOWER BAR, GRAB HANDLE LEFT BAR, GRAB HANDLE RIGHT
SABER 24V (SS) 98742 10/27/99
5-2
CONTROL TOWER GROUP
3
6 2
8 5
1
7
5-3
4
SABER 24V (SS) 98742 12/14/99
10
9
CONTROL TOWER GROUP REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10
27757 57189 70251 70305 70604 70532 87029 140133 87018 57030
1 4 4 4 6 6 4 2 6 6
DESCRIPTION
SERIAL NO. FROM
NOTES:
CONSOLE, REAR NUT, 1/4-20 FLANGE LOCK SET SCR, 1/4-20 X 1.0 PLTD DL SCR, 5/16-18 X 3/4HHCSGR5PLTDL SCR, 10-32 X 5/8 PPHMS BLACK SCR, 10-32 X 1/2 PPHMS BLK WASHER, 5/16 FLAT SS BRACKET, RECOVERY HOSE WASHER, #10 X 9/16 OD NUT, 10-32 HEX NYLOCK
SABER 24V (SS) 98742 12/14/99
5-4
DECAL GROUP
3
4
2
5
5-5
1
SABER 24V (SS) 98742 10/2799
DECAL GROUP REF
PART NO.
QTY
1 2 3 4 5 6 7
50915 50916 500023 500024 50990 98721 14382
1 1 1 1 1 1 1
DESCRIPTION
SERIAL NO. FROM
LABEL, SABER (LEFT) LABEL, SABER (RIGHT) LABEL, SCRUBBER PANEL LABEL, CIRCUIT BREAKERS LABEL, WINDSOR LOGO DOMED CARD, WINDSOR SERVICE BAND, SERVICE CARD
NOTES:
NOT SHOWN NOT SHOWN
NOTE: SEE “SAFETY LABEL LOCATION” PAGE FOR SAFETY LABEL INFORMATION.
SABER 24V (SS) 98742 10/2799
5-6
ELECTRICAL PANEL GROUP
25 27
8 26
25
38 9
29
8 17 13 16 33 28
6 13
37 21
37 24
13 14 5
33 1 11 23
20
1 30
12 36
31
2
35
22 34 2
7 18 19 32 4
5-7
3
SABER 24V (SS) 98742 10/27/99
15
10
ELECTRICAL PANEL GROUP REF
PART NO.
QTY
DESCRIPTION
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
14606 14607 14717 14942 27695 27858 35210 48072 54145 54156 57047 57104 57105 57106 57117 57256 62283 62808 66321 67393 70011 70067 70393 70615 72130 72159 72165 73987 73538 73659 73734 80845 87026 87134 87142 87166 87187 66335
2 2 1 1 1 1 1 2 1 1 4 6 3 2 6 2 1 1 1 3 1 8 1 2 2 1 1 1 2 1 2 4 2 8 6 6 2 REF
BREAKER, 30A 250VAC 50VDC BREAKER, 25A 250VAC 50VDC BREAKER, 3A 250VAC 50VDC BOOT, 3/8 CIRCUIT BREAKER CONTROLLER, 24VDC PROPEL MTR CIRCUIT BOARD, SOLUTION/FLOAT GASKET, ELECTRIC PANEL KNOB, 1.06 OD X .25 ID W/SET SCR METER,24V BATTERY CHARGE LEVEL METER, 0-50 AMP DC NUT, 1/4-20 HEX NYLOCK NUT, 10-32 W/STAR WASHER PLTD NUT, 1/4-20 HEX W/STAR NUT, 8-32 HEX W/STAR NUT, 5/16-24 HEX PLTD NUT, 6-32 HEX BRASS PLATE, METER RETAINING PLATE, ELECTRIC PANEL PLUG, .875 HOLE RELAY, 24VDC 100 AMP SCR, 1/4-20 X 5/8 HHCS SS DL SCR, 6-32 X 3/8 PPHMS SS SET SCR, 1/4-20X 1.25L SCR, 6-32 X 3/8 SRHMS BR SWITCH, SPST 2-POSITION ROCKER SWITCH, KEY 2 POSITION SWITCH, DPDT 3-POSITION ROCKER SHUNT, DC AMM. 25 AMP, 50 MV STANDOFF, 5/8 L, 6-32 STANDOFF, INS. 1.0L, 1/4-20 THD SPACER, .166 ID X .313 OD X .375L AL BOOT, 3/8 CIRCUIT BREAKER WASHER, #6 LOCK EXT STAR SS WASHER, #6 SPLIT WASHER, .344X.69X.066 FLAT PLT WASHER, 5/16 EXT LOCK PLTD WASHER, #6 FLAT BRASS POTENTIOMETER
SERIAL NO. FROM
SABER 24V (SS) 98742 10/27/99
NOTES:
SERVICE ONLY
5-8
FRONT COVER GROUP
2
4 3
1
5-9
SABER 24V (SS) 98742 10/27/99
FRONT COVER GROUP REF
PART NO.
QTY
1 2 3 4
27860 48012 70639 87029
1 2 4 2
DESCRIPTION
SERIAL NO. FROM
NOTES:
COVER, FRONT 24V DISK KNOB, 5/16-18 4 PRONG SCR, 5/16 X 1.75 SSSCU WASHER, 5/16 FLAT SS
SABER 24V (SS) 98742 10/27/99
5-10
RECOVERY TANK GROUP
19 18
8
11
4
9
14
3 19
16
12 21
6 3 5 15
1
12
10
17
10 3
2 7 20 13
5-11
SABER 24V (SS) 98742 11/08/01
RECOVERY TANK GROUP REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
78480 39307 20064 27670 35219 39472 39511 39519 40019 57033 66227 66240 70305 70641 73906 75296 78443 82575 87029 87212 89127
1 1 3 1 1 1 1 1 1 1 1 1 6 2 1 1 1 1 4 4 2
DESCRIPTION TUBE, 1.5 X 12 PVC HOSE ASM, 1.50 VAC CLAMP, 2.0" WORM GEAR X .312W CORD, DRAIN PLUG GASKET, 1 1/2 COMPRESSION HOSE, 1.5 X 24.0 DRAIN HOSE ASM, 1.5 X 11 BLK VAC HOSE, P-TRAP HOSEBARB, 1.5 DOUBLE MCHD NUT, 1.5 SLIP JOINT PLUG, DRAIN HOSE PLUG, 3/4” MPT PVC SCR, 5/16-18 X 3/4HHCSGR5PLTDL SHOULDER BOLT, 3/8OD X 3/8L SS SWITCH ASM, FLOAT TANK, RECOVERY TUBE, 1.50 X 12.0" PVC PLATE, TANK SUPPORT WASHER, 5/16 FLAT SS WASHER, .344ID X 1.13OD X .09T PLTD WLDMNT, HINGE PIN
SERIAL NO. FROM 1000078636 1000078636
SABER 24V (SS) 98742 11/08/01
NOTES:
5-12
SCRUB BRUSH/PAD DRIVER GROUP (HEX DRIVE)-24 IN 7 5 6 10 9 4 7 5
8 6 10 9 4
1
2A 2B 2C
8
5
3
REF
PART NO.
QTY
1 2A 2B 2C 3 4 5 6 7 8 9 10
02336 02341 02342 02343 51284 70682 70576 70682 73817 73861 81471 87013
2 2 2 2 1 6 4 3 1 1 1 3
5-13
DESCRIPTION PAD DRIVER, 12” HEX BRUSH, 12” POLYPROPYLENE HEX BRUSH, 12” NYLON HEX BRUSH, 12” MILD GRIT HEX LOCK, PAD CENTER SNAP, TWO STEP SCR, 1/4-20 X 5/8 PPHTC SS SCR, #8 X 1/2 PPH T/S SS SCR, 1/4-20 X 5/8 PPHTC SS SPRING, EXT .31 D X 2.0 L X .03 W SS CLUTCH, HEX DRIVE PALTE, BRUSH RELEASE WASHER, 1/4 ID X 5/8 OD SS
SABER 24V (SS) 98742 03/31/00
SERIAL NO. FROM
NOTES:
SCRUB BRUSH/PAD DRIVER GROUP (STAR DRIVE)-24 IN 7
5
6 9 4 8
7
5
6 9 4 8 2A 2B 2C 2D
1
5
3
REF
PART NO.
QTY
1 2A 2B 2C 2D 3 4 5 6 7 8 9
02400 02401 02402 02404 02405 51284 70695 70694 70696 73817 730011 62852
2 2 2 2 2 1 3 4 3 1 1 1
DESCRIPTION
SERIAL NO. FROM
NOTES:
PAD DRIVER, 12” SD BRUSH, 12” POLYPROPYLENE SD BRUSH, 12” NYLON SD BRUSH, 12” MILD GRIT SD BRUSH, 12” SUPER AGG SD LOCK, PAD CENTER SNAP, TWO STEP SCR, 12-24 X 1.0 PPHMS SS SCR, 8-32 X 3/4 PTHMS SCR, 10-32 X 3/4 PTHMS SPRING, EXT .31 D X 2.0 L X .03 W SS SOCKET, DRIVE BRUSH PLATE, BRUSH RELEASE
SABER 24V (SS) 98742 03/31/00
5-14
SCRUB BRUSH/PAD DRIVER GROUP (HEX DRIVE)-26 IN 7 5 6 10 9 4 7 5
8 6 10 9 4
1
2A 2B 2C
8
5
3
REF
PART NO.
QTY
1 2A 2B 2C 3 4 5 6 7 8 9 10
02390 02387 02388 02389 51284 70682 70576 70682 73817 73861 81471 87013
2 2 2 2 1 6 4 3 1 1 1 3
5-15
DESCRIPTION PAD DRIVER, 13” HEX BRUSH, 13” POLYPROPYLENE HEX BRUSH, 13” NYLON HEX BRUSH, 13” MILD GRIT HEX LOCK, PAD CENTER SNAP, TWO STEP SCR, 1/4-20 X 5/8 PPHTC SS SCR, #8 X 1/2 PPH T/S SS SCR, 1/4-20 X 5/8 PPHTC SS SPRING, EXT .31 D X 2.0 L X .03 W SS CLUTCH, HEX DRIVE PLATE, BRUSH RELEASE WASHER, 1/4 ID X 5/8 OD SS
SABER 24V (SS) 98742 03/31/00
SERIAL NO. FROM
NOTES:
SCRUB BRUSH/PAD DRIVER GROUP (STAR DRIVE)-26 IN 7
5
6 9 4 8
7
5
6 9 4 8 2A 2B 2C
1
5
3
REF
PART NO.
QTY
1 2A 2B 2C 3 4 5 6 7 8 9
02406 02407 02408 02410 51284 70695 70694 70696 73817 730011 62852
2 2 2 2 1 3 4 3 1 1 1
DESCRIPTION
SERIAL NO. FROM
NOTES:
PAD DRIVER, 13” SD BRUSH, 13” POLYPROPYLENE SD BRUSH, 13” NYLON SD BRUSH, 13” MILD GRIT SD LOCK, PAD CENTER SNAP, TWO STEP SCR, 12-24 X 1.0 PPHMS SS SCR, 8-32 X 3/4 PTHMS SCR, 10-32 X 3/4 PTHMS SPRING, EX .31 D X 2.0 L X .03 W SS SOCKET, DRIVE BRUSH PLATE, BRUSH RELEASE
SABER 24V (SS) 98742 03/31/00
5-16
SCRUB BRUSH/PAD DRIVER GROUP (HEX DRIVE)-28 IN 7 5 6 10 9 4 7 5
8 6 10 9 4
1
2A 2B 2C
8
5
3
REF
PART NO.
QTY
1 2A 2B 2C 3 4 5 6 7 8 9 10
02337 02344 02345 02346 51284 70682 70576 70682 73817 73861 81471 87013
2 2 2 2 1 6 4 3 1 1 1 3
5-17
DESCRIPTION PAD DRIVER, 14” HEX BRUSH, 14” POLYPROPYLENE HEX BRUSH, 14” NYLON HEX BRUSH, 14” MILD GRIT HEX LOCK, PAD CENTER SNAP, TWO STEP SCR, 1/4-20 X 5/8 PPHTC SS SCR, #8 X 1/2 PPH T/S SS SCR, 1/4-20 X 5/8 PPHTC SS SPRING, EXT .31 D X 2.0 L X .03 W SS CLUTCH, HEX DRIVE PLATE, BRUSH RELEASE WASHER, 1/4 ID X 5/8 OD SS
SABER 24V (SS) 98742 03/31/00
SERIAL NO. FROM
NOTES:
SCRUB BRUSH/PAD DRIVER GROUP (STAR DRIVE)-28 IN 7
5
6 9 4 8
7
5
6 9 4 8 2A 2B 2C 2D
1
5
3
REF
PART NO.
QTY
1 2A 2B 2C 2D 3 4 5 6 7 8 9
02412 02413 02414 02416 02417 51284 70695 70694 70696 73817 730011 62852
2 2 2 2 2 1 3 4 3 1 1 1
DESCRIPTION
SERIAL NO. FROM
NOTES:
PAD DRIVER, 14” SD BRUSH, 14” POLYPROPYLENE SD BRUSH, 14” NYLON SD BRUSH, 14” MILD GRIT SD BRUSH, 14” SUPER AGG SD LOCK, PAD CENTER SNAP, TWO STEP SCR, 12-24 X 1.0 PPHMS SS SCR, 8-32 X 3/4 PTHMS SCR, 10-32 X 3/4 PTHMS SPRING, EXT .31 D X 2.0 L X .03 W SS SOCKET, DRIVE BRUSH PLATE, BRUSH RELEASE
SABER 24V (SS) 98742 03/31/00
5-18
SCRUBHEAD GROUP – 24 IN
8 12 22 15 9 17
2A
19 20A
10 6
23
4
3 5
21 13
18
16
24 7 2B 20B 19 11B 1
14
5-19
SABER 24V (SS) 98742 03/31/00
11A
SCRUBHEAD GROUP – 24 IN REF
PART NO.
QTY
1 2A 2B 3 4 5 6 7 8 9 10 11A 11B 12 13 14 15 16 17 18 19 20A 20B 21 22 23 24
20077 29119 29220 34327 39053 39486 40043 48040 53630 14695 140394 57111 57119 70083 70673 70385 70507 73790 80805 81380 81898 82923 87083 87142 87212 87163 89059 89187 87213
1 2 2 1 1 1 2 2 2 1 1 2 2 1 8 1 4 4 2 1 2 2 2 8 1 1 2
DESCRIPTION CLAMP, L2000D/22 WORM #HS356 DRIVER, BRUSH HEX DRIVER, BRUSH SD FITTING, 1/2 X 3/8 X 3/8 RED. TEE HOSE, 3/8 NYLOBRAID X 7.0” HOSE, 3/8 NYLOBRAID X 2” HOSEBARB, 3/8 MPT X 3/8 HOSE 90 KEY, 1/4 SQ X 1.00 MOTOR ASM, 24VDC 200 RPM GEAR BRUSH SET, BRUSH MOTOR IMPRL BRUSH SET,53185/630/632 WINDSR NUT, 3/8-16 HEX NUT, 3/8-16 HEX NYLOCK SCR, 5/16-18 X 1.00 HHCS SS SCR, 5/16-18 X 1.25 HHCS SS SCR, 3/8-16 X 2.00 HHCS GR5 SCR, 3/8-16 X 3/4 HHCS GR5 SKIRT, SHROUD 3.25 X 58.0 L CLIP, TREE .19 HOLE FLAT HEAD NUT, SEALED BULKHEAD COVER, BRUSH RELEASE PAD, ANTI SLIP 1.00 X 12.0 L WASHER, 5/16 SPLIT WASHER, .34 X .69 FLAT WASHER, .344 ID X 1.13 OD X .09 T WASHER, 3/8 SPLIT WHEEL, PT20 SQUEEGEE WELDMENT, SCRUB HEAD 24IN WASHER, .78 ID X 1.63 OD X .25 T
SERIAL NO. FROM
NOTES:
1000042127
(NOT SHOWN) (NOT SHOWN)
1000042127
1000042127
1000042127
SABER 24V (SS) 98742 03/31/00
5-20
SCRUBHEAD GROUP – 26 IN
8 12 22 15 9 17
2A
19 20A
10 6
23
4
3 5
21 13
18
16
24 7 2B 20B 19 11B 1
14
5-21
SABER 24V (SS) 98742 03/31/00
11A
SCRUBHEAD GROUP – 26 IN REF
PART NO.
QTY
1 2A 2B 3 4 5 6 7 8 9 10 11A 11B 12 13 14 15 16 17 18 19 20A 20B 21 22 23 24
20076 29119 29220 34327 39053 39477 40043 48040 53630 14695 140394 57111 57119 70083 70673 70385 70507 73959 80805 81380 81898 82923 87083 87142 87212 87163 89059 89195 87213
1 2 2 1 1 1 2 2 2 1 1 2 2 1 8 1 4 4 2 1 2 2 2 8 1 1 2
DESCRIPTION
SERIAL NO. FROM
CLAMP, WORM GEAR .5WX24 #390 DRIVER, BRUSH HEX DRIVER, BRUSH SD FITTING, 1/2 X 3/8 X 3/8 RED. TEE HOSE, 3/8 NYLOBRAID X 7.0” HOSE, 3/8 NYLOBRAID X 3” HOSEBARB, 3/8 MPT X 3/8 HOSE 90 KEY, 1/4 SQ X 1.00 MOTOR ASM, 24VDC 200 RPM GEAR BRUSH SET, BRUSH MOTOR IMPRL BRUSH SET,53185/630/632 WINDSR NUT, 3/8-16 HEX NUT, 3/8-16 HEX NYLOCK SCR, 5/16-18 X 1.00 HHCS SS SCR, 5/16-18 X 1.25 HHCS SS SCR, 3/8-16 X 2.00 HHCS GR5 SCR, 3/8-16 X 3/4 HHCS GR5 SKIRT, SHROUD 3.25 X 62.0 L CLIP, TREE .19 HOLE FLAT HEAD NUT, SEALED BULKHEAD COVER, BRUSH RELEASE PAD, ANTI SLIP 1.00 X 12.0 L WASHER, 5/16 SPLIT WASHER, .34 X .69 FLAT WASHER, .344 ID X 1.13 OD X .09 T WASHER, 3/8 SPLIT WHEEL, SQUEEGEE WELDMENT, SCRUB HEAD 26IN WASHER, .78 ID X 1.63 OD X .25 T
SABER 24V (SS) 98742 03/31/00
NOTES:
*
(NOT SHOWN) (NOT SHOWN)
*
*
*
5-22
SCRUBHEAD GROUP – 28 IN 12 8 22
9
15 17 2A
19 20A
10
6
23
4
3 5
21 16
18
13
24 7 2B 20B 11A
19 1
14
5-23
SABER 24V (SS) 98742 03/31/00
11A
SCRUBHEAD GROUP – 28 IN REF
PART NO.
QTY
1 2A 2B 3 4 5 6 7 8 9 10 11A 11B 12 13 14 15 16 17 18 19 20A 20B 21 22 23 24
20076 29119 29220 34327 39053 39452 40043 48040 53630 14695 140394 57111 57119 70083 70673 70385 70507 73889 80805 81380 81898 82923 87083 87142 87212 87163 89059 89193 87213
1 2 2 1 1 1 2 2 2 1 1 2 2 1 8 1 4 4 2 1 2 2 2 8 1 1 2
DESCRIPTION
SERIAL NO. FROM
CLAMP, WORM GEAR .5WX24 #390 DRIVER, BRUSH HEX DRIVER, BRUSH SD FITTING, 1/2 X 3/8 X 3/8 RED. TEE HOSE, 3/8 NYLOBRAID X 7.0” HOSE, 3/8 NYLOBRAID X 5-1/2” HOSEBARB, 3/8 MPT X 3/8 HOSE 90 KEY, 1/4 SQ X 1.00 MOTOR ASM, 24VDC 200 RPM GEAR BRUSH SET, BRUSH MOTOR IMPRL BRUSH SET,53185/630/632 NUT, 3/8-16 HEX NUT, 3/8-16 HEX NYLOCK SCR, 5/16-18 X 1.00 HHCS SS SCR, 5/16-18 X 1.25 HHCS SS SCR, 3/8-16 X 2.00 HHCS GR5 SCR, 3/8-16 X 3/4 HHCS GR5 SKIRT, SHROUD 3.25 X 65.0 L CLIP, TREE .19 HOLE FLAT HEAD NUT, SEALED BULKHEAD COVER, BRUSH RELEASE PAD, ANTI SLIP 1.00 X 12.0 L WASHER, 5/16 SPLIT WASHER, .34 X .69 FLAT WASHER, .344 ID X 1.13 OD X .09 T WASHER, 3/8 SPLIT WHEEL, SQUEEGEE WELDMENT, SCRUB HEAD 28IN WASHER, .78 ID X 1.63 OD X .09 T
SABER 24V (SS) 98742 03/31/00
NOTES:
*
(NOT SHOWN) (NOT SHOWN)
*
*
*
5-24
SCRUBHEAD LIFT GROUP - DISK
26
1
25 15 12 17 7
8
20 18
2
23
6 11 7 7
5
19 16
21
3
4
10
13
9
22
24
7 2A
5 19
14
5-25
SABER 24V (SS) 98742 05/25/01
SCRUBHEAD LIFT GROUP - DISK REF
PART NO.
QTY
1 2 2A 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
05124 81324 09130 140353 140372 27856 57111 57119 57216 57217 57263 62676 66232 67415 70266 70305 70377 70574 73883 80102 80459 80606 80697 81406 82060 87029 89204
1 4 8 2 1 1 2 10 4 2 2 1 1 2 4 3 8 2 1 4 1 3 2 1 1 3 1
DESCRIPTION ACTUATOR, 36 VDC 5.0 STROKE BEARING, 1/2 ID X 11/32L NYLON BEARING, 1/2 NYLINER 7/32 BALL JOINT ASSY, 3/8-24 LH BRKT, SCRUB HEAD MOUNT LINKAGE, SKRUB DECK NUT, 3/8-16 HEX NUT, 3/8-16 HEX NYLOCK NUT, 3/8-24 HEX NYLOCK NUT, 3/8-24 HEX JAM PLTD NUT, 3/8-24 UNF LH PLATE, SPRING SUPPORT PIN, CLEVIS 3/8 X 1.50 ROD, SCRUB LIFT SCR, 3/8-16 X 1" HHCSGR5PLTDL SCR, 5/16-18 X 3/4 HHCSGR5PLTDL SCR, 3/8-16 X 1.25 HHCS GR5 SCR, 3/8-16 X 7.5 HHCS GR5 PLTD SPRING, COMP .97OD X 3.5 L SPACER, .500 OD X .391 ID X .400 PLATE, SPRING RETAINER COTTER, 3/8" RING BALL JOINT ASY, 3/8-24 RH PIN, CLEVIS 3/8" X 2" PIN, CLEVIS 3/8 X 5.25 WASHER, 5/16 FLAT SS WELDMENT, ACTUATOR BRKT
SERIAL NO. FROM
NOTES:
1000062420 1000039258 1000039258
QUANTITY WAS 2 QUANTITY WAS 14
1000039258 1000039258 1000039258
1000039258
QUANTITY WAS 8 1000039258 1000039258
SABER 24V (SS) 98742 05/25/01
5-26
SOLUTION TANK GROUP
5 3
16
18 4
13
12 2
15
8 11 17 21
19
7
1
20 14 6 22
10
9
5-27
SABER 24V (SS) 98742 10/27/99
SOLUTION TANK GROUP REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
20042 20090 27425 27670 27772 36191 39498 39505 39514 39521 40039 40076 41333 70088 70632 75245 73999 82267 84141 87095 39549 40082
6 4 1 1 1 1 2 2 1 1 1 1 2 2 2 1 1 1 1 2 1 1
DESCRIPTION
SERIAL NO. FROM
NOTES:
CLAMP, 3/8 HOSE (D-SLOT) CLAMP, 1.0 NYLON RACHET CORD, SOLUTION COVER CORD, DRAIN PLUG COVER, SOLUTION TANK GROMMET 1.00 ID 3/16 GRIP HOSE, 1/2" NYLOBRAID X 1 1/2" HOSE, 1.0 X 18.0 DRAIN HOSE, 3/4 ID X .12W X 32" CLR HOSE, 1/2 NYLOBRAID X 36" HOSEBARB, 1/2MPT X 1/2 HOSE 90 SLEEVE .63 ID X 1.0 OD HINGE, SCRUBBER TANK SCR, 10-32 X 1/2 PPHMS SS SCR, 5/16-18 X 3/4 FHSCS BLKZC TANK, SOLUTION STRAINER, 1/2 HOSE 40 MESH PLUG, 5/8" DRAIN HOSE VALVE, 24VDC SOL.1/2"HOSEBARB WASHER, #10 FLAT PLTD HOSE, 1/2" WIRE BOUND X 5" HOSEBARB, 1/2 X 90D
SABER 24V (SS) 98742 10/27/99
5-28
SQUEEGEE GROUP – 24 IN & 26 IN SCRUBHEADS
24 25 31
11 6
3
1 13
17
26 2
9
5 27
1
21 16
4 3 8 15 7
19A 19B 19C
20 29
14 12
18A 18B 18C
30
23
22
28
10
5-29
SABER 24V (SS) 98742 03/31/00
SQUEEGEE GROUP – 24 IN & 26 IN SCRUBHEADS REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18A 18B 18C 19A 19B 19C 20 21 22 23 24 25 26 27 28 29 30 31
57047 57111 57119 57269 57270 62814 62815 62816 66276 67380 70105 70291 70385 70678 70679 70680 73576 73976 73977 73978 73894 73898 73896 78034 80605 81488 81489 81535 87030 89059 89197 140382 140383 140384 140385
4 2 4 2 3 1 8 1 2 4 2 2 2 2 2 3 2 1 1 1 2 1 1 4 2 2 2 1 1 1 2
DESCRIPTION
SERIAL NO. FROM
NUT, 1/4-20 HEX NYLOCK NUT, 3/8-16 HEX NUT, 3/8-16 HEX NYLOCK NUT, 3/8-16 HEX COUPLING SS NUT, 5/16-18 CAPTIVE "J" PLTD PLATE, SQG RETAINER TOP PLATE, SQG FILLER PLATE, SQG BLADE RETAINER PIN, CLEVIS 5/16 X 1.63 RIVET, 5/32 OD X 1/8 GRIP SCR, 1/4-20 X 1.75 HHCS SCR, 1/4-20 X 1.5 ELEVATOR SCR, 3/8-16 X 2.0 HHCS GR5 PLT SCR, 3/8-16 X 3.5 CARRIAGE SS SCR, 3/8-16 X 2.5 TAP SCR, 5/16-18X1 THUMB SS TYPE P SPRING, 2 X .6 OD COMPRESSION SQUEEGEE, REAR BLADE LINATEX SQUEEGEE, REAR BLADE (TILE) SQUEEGEE, REAR BLADE (BUTTONS) SQGE BLADE, FRONT LINATEX 35" SQGE BLADE, FRONT (TILE) 35" SQGE BLADE, FRONT (BUTTONS) 35 TUBE 1.5 0D X 2.5 VAC INTAKE COTTER, 5/16 RING LATCH, SQUEEGEE STRAP STRIKER, SQUEEGEE STRAP REAR KNOB, SQUEEGEE ADJ PLATE WASHER, 3/8 X 3/4 NYL WHEEL, SQUEEGEE BUMPER WHEEL, 2 OD X .31 ID .875 W GRY BAND, REAR SQUEEGEE BAND, FRONT SQUEEGEE BAND, REAR SQUEEGEE BRKT, SQUEEGEE HGT ADJUSTMENT
SABER 24V (SS) 98742 10/27/99
NOTES:
(STANDARD) (OPTION) (OPTION) (STANDARD) (OPTION) (OPTION)
5-30
SQUEEGEE GROUP-28 IN SCRUBHEAD 24 1
26 32
11 6
3 14
18
9
27 2
28
5
13
1
21 17 4
8
3
7
12
25A 25B 25C
16 20 29
15
30 19A 19B 19C
23
22
31
10
5-31
SABER 24V (SS) 98742 10/27/99
SQUEEGEE GROUP – 28 IN SCRUBHEAD REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19A 19B 19C 20 21 22 23 24 25A 25B 25C 26 27 28 29 30 31 32
57047 57111 57119 57269 57270 62811 62812 62813 66276 67380 70105 70291 70377 70385 70678 70679 70680 73576 73900 73902 73901 78034 80605 81488 81489 81535 82528 82637 82640 87030 89059 89197 140380 140381 140382 140385
4 2 6 2 3 1 8 7 2 4 2 2 2 2 2 2 3 2 1 1 2 1 1 4 1 2 2 2 1 1 1 2
DESCRIPTION
SERIAL NO. FROM
NUT, 1/4-20 HEX NYLOCK NUT, 3/8-16 HEX NUT, 3/8-16 HEX NYLOCK NUT, 3/8-16 HEX COUPLING SS NUT, 5/16-18 CAPTIVE "J" PLTD PLATE, SQG RETAINER TOP PLATE, SQUEEGEE FILLER PLATE, SQG BLADE RETAINER PIN, CLEVIS 5/16 X 1.625 LG RIVET, 5/32 OF X 1/8 GRIP SCR, 1/4-20 X 1.75 HHCS PLTD SCR, 1/4-20 X 1.5 ELEVATOR SCR, 3/8-16 X 1.25 HHCS GR5PLT SCR, 3/8-16 X 2.0 HHCS GR5 PLT SCR, 3/8-16X3.5 CARRIAGE PLTD SCR, 3/8-16 X 2.5 TAP SCR, 5/16-18X1 THUMB SS TYPE P SPRING, COMP .60D X2.0L X.045W SQGE BLADE, REAR LINATEX 44" SQGE BLADE, REAR (TILE) 44" SQGE BLADE, REAR (BUTTONS) 44" TUBE, 1.5 OD X 2.5 VAC INTAKE COTTER, 5/16" RING LATCH, SQUEEGEE STRAP STRIKER, SQUEEGEE STRAP REAR KNOB, 3/8-16 4 PRONG SQUEEGEE, FRONT BLADE LINATEX SQUEEGEE, FRONT BLADE (TILE) SQUEEGEE, FRONT BLADE (BUTTON) WASHER, 3/8 ID X 3/4 OD NYLON WHEEL, BUMPER WHEEL, 2 OD X.31IDX.875W, GRY BAND, SQUEEGEE FRONT BAND, SQUEEGEE REAR BAND, SQUEEGEE REAR (S) BRKT, WHEEL MOUNT
SABER 24V (SS) 98742 10/27/99
NOTES:
(STANDARD) (OPTION) (OPTION)
(STANDARD) (OPTION) (OPTION)
5-32
SQUEEGEE LIFT GROUP
32
13
7 30 29
2
31
3 12
20
6
25 28
14 21 1 24
18
11
9 15
8
22 34 19
17
16 35 5
23
38 33
4
10
37 27
5-33
SABER 24V (SS) 98742 10/27/99
36
26
SQUEEGEE LIFT GROUP REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
27794 36133 51289 51322 51323 57006 57047 57113 57119 57153 64096 66191 67423 70297 70641 70341 70685 730006 73265 78430 80604 80606 80607 80612 48077 82060 82322 87086 87030 87056 87135 87200 87201 140293 140379 80815 80582 73831
1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 2 3 2 1 1 1 1 1 1 1 2 1 4 3 2 1 1 2 1 1
DESCRIPTION CABLE, 23.70 X 1/8 GRIP, 3/16 X 1.0 FLAT BAR LEVER, SQUEEGEE LIFT LINKAGE, SQUEEGEE LIFT LINKAGE, SQUEEGEE PIVOT NUT, 1/4-20 HEX NUT, 1/4-20 HEX NYLOCK NUT, 5/16-18 HEX NYLOCK NUT, 3/8-16 HEX NYLOCK NUT, 1/2-13 X HEX NYLOCK THIN PULLEY, 1.5 OD X .5 W X .25 B PIN, CLEVIS 3/16” X 1/2” PLTD RAIL RACHET SCR, 1/4-20 X 1.5 HHMS SHOULDER BOLT, 3/8OD X 3/8L SS SCR, 1/2-13 X 2.5 HHCS GR5PLT SCR, 3/8-16 X2.75 HHTB GR5 PLTD SPRING, COMP 1.100DX2.0LX.148W SPRING, EXT. .80D X 4.00L X .120W TUBE, .38 OD X .26 ID X .38 LG COTTER, 1/4 RING COTTER, 3/8 RING COTTER, 1/2 RING PIN, CLEVIS 1/4 X 1.0 KNOB, 3.50 ODX3/8-16 THRU HOLE PIN, CLEVIS 3/8 X 5.25 PIN, CLEVIS 1/2 X 4.80 WASHER, M10 X 30 PLTD WASHER, 3/8 ID X 3/4 OD NYLON WASHER, M6 FLAT WASHER, .26 ID X .50 OD WASHER, .4 ID X 1.3 OD NYLON WASHER, 0.781 ID FIBERGLIDE SPACER, .75 OD X .50 ID X 1.50 L BRACKET, SQUEEGEE MOUNT BEARING, FLANGED PLASTIC CHAIN, #1/0 7-LINKS GROUNDING S-HOOK, 2"
SERIAL NO. FROM
NOTES:
1000037808
WAS 73979
SABER 24V (SS) 98742 10/27/99
5-34
VACUUM GROUP
9 14 8 13
12
11
4 7 2
6
10 5
1
5-35
3
SABER 24V (SS) 98742 12/06/99
VACUUM GROUP REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14
34337 35122 35211 35212 35214 39547 53631 14548 57104 57245 62805 70607 70638 73566 87013
1 1 1 1 1 1 1 4 3 1 4 3 3 3
DESCRIPTION
SERIAL NO. FROM
FILTER, SABER 24 VAC GASKET, 230V C17EI/C20 VAC MOTOR GASKET, 8.50 X 16.40 X .50T GASKET, 6.30 X 16.1 C .50T GASKET, VAC MOTOR HOSE ASM, 1.5 BLK VAC X 21 VAC MOTOR ASM, 24VDC 3 STAGE BRUSH SET, 24VDC 5.7 3ST VCMTR NUT, 10-32 W/STAR WASHER PLTD NUT, 1/4-20 HEX NYLOCK SS PLATE, VAC MOUNT SET SCR, #10-32 X 1.00 SS SCR, 1/4-20 X 1.75 SSSCU SPACER, 1/2 OD X 3.0 W/1/4-20 AL WASHER, 1/4 ID X 5/8 OD SS
SABER 24V (SS) 98742 10/27/99
NOTES:
(NOT SHOWN)
5-36
WHEELS AND FRAME GROUP
12
4
9 8 7 2
11A - E 1 6 10
5
3
5-37
SABER 24V (SS) 98742 10/27/99
WHEELS AND FRAME GROUP REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10 11A 11B 11C 11D 11E 12
05128 18041 57113 57119 57128 62714 70266 70325 87003 87029 89155 78414 89175 78414 830748 89211 89212 89190
1 2 4 8 8 2 8 4 8 4 2 1
DESCRIPTION
SERIAL NO. FROM
AXLE, MOTOR DRIVE 24 VDC CASTER, 4” DIA. X 2 X 3.56 R NUT, 5/16-18 HEX NYLCK NUT, 3/8-16 HEX NYLOCK NUT, 5/16-24 HEX NYLOCK PLATE, DRIVE AXLE SCR, 3/8-16 X 1.00 HHCS GR5 SCR, 5/16-18 X 1.25 HHCS GR5 WASHER, 3/8 X 7/8 FLAT SS WASHER, 5/16 FLAT SS WHEEL, 10” PNEU. NON-MARKING TUBE, 10” TIRE WHEEL ASY, 10IN PNEU, BLACK TUBE, 10” TIRE WHEEL ASM, 10” SOLID SPCL SCBR WHEEL ASM, 10” FMFL N-MARKING WHEEL ASM, 10” FMFL BLK KNOBBY WELDMENT, FRAME
SABER 24V (SS) 98742 10/27/99
NOTES:
(STANDARD) (NOT SHOWN) (OPTION) (NOT SHOWN)
5-38
WIRING GROUP – BATTERY & CABLES
2 1
+
-
+
+
-
-
+
8 4
5 6
9 7
10
5-39
SABER 24V (SS) 98742 07/22/00
-
3
5 11A 11B
WIRING GROUP – BATTERY & CABLES REF
PART NO.
QTY
1 2 3 4 5 6 7
23125 23190 23191 70010 82803 87025 81366
3 1 1 2 2 2 2
8
880209
1
9 10 11A 11B 12A 12B
70114 20054 10009 10006 02453 02454
1 2 REF REF REF REF
DESCRIPTION
SERIAL NO. FROM
WIRE, 4 X 15 B CLAMP CABLE, 4 X 27 RED CABLE, 4 X 27 BLK SCR, 1/4-20 X 1.5 HHCS SS CONNECTOR, RED 24V WASHER, 1/4 LOCK EXT STAR SS CABLE, ELECTRICAL 4GA X 82.5 CHARGER ADAPTER, 24V, C175 TO C50 SCR, #10 X 3/4 PPHST TYPE B CLAMP, 3/8 NYLON UL/CSA BATTERY, 6V / 305 AH BATTERY, 6V / 250 AH CHRGR, 24V, 25A, 115V, C175 CHRGR, 24V, 18A, 115V, C175
SABER 24V (SS) 98742 07/22/00
NOTES:
OPTION
4 REQ’D 4 REQ’D NOT SHOWN NOT SHOWN
5-40
WIRING GROUP – CONTROL PANEL
DIAGRAM A
25 BLK 31 BLK
35 RED
ROCKER
ROCKER 47 RED
34 RED
24 BLK 18 BLU
9 BLU
KEY SWITCH
20 BLU
48 BLK
ROCKER 2 BLK
23 BLK 33 RED 58 RED
41 BLU
AMP METER
12 RED 6 BLK 26 RED
22 RED 32 RED
21 RED
DIAGRAM B
3 BLU 7 RED
POT 43 BLK
2 BLK 1 RED 57 RED 29 YLW 3 BLU 17 ORG 4 RED
50 BLK
47 RED
48 BLK
52 RED 56 RED
16 RED
BATTERY METER SOLUTION CONTROL BOARD
5 RED
49 BLK
58 RED
51 RED
12 RED 19 BLK
CONTROLLER
3
59 BLK
DIAGRAM C 13 RED 41 BLU
C
40 BLK
11 RED
26 RED
MAIN RELAY 4 RED
28 WHT 27 GRN 17 ORG
9 BLU 8 BLU 7 RED 28 WHT 6 BLK 27 GRN 59 BLK 40/43 BLK 19/23 BLK
29 YLW 30 RED 18 BLU
10 RED
5 RED
49/50 BLK
B 1
SHUNT
60 RED
VACUUM RELAY
22 RED 21 RED
8 BLU 57 RED
11 RED
A
10 RED 15 RED
2
54 RED 20 BLU
14 RED 13 RED
25A
PROPEL
25A
VAC MTR
30A
30A
BRUSH BRUSH RIGHT LEFT
3A
MAIN 1/35 RED
30 RED
52 RED NEGATIVE BATTERY CABLE
5-41
51 RED 56 RED 16 RED
SABER 24V (SS) 98742 10/27/99
14/15 RED
BRUSH RELAY
POSITIVE BATTERY CABLE
WIRING GROUP – CONTROL HARNESS REF
PART NO.
QTY
1 2 3
41360 29204 29215
1 1 1
DESCRIPTION
SERIAL NO. FROM
NOTES:
HARNESS, PANEL DIODE ASM, 76008 X 76008 DIODE ASM, 76075 X 76075
SABER 24V (SS) 98742 10/27/99
5-42
WIRING GROUP – MAIN HARNESS
74 RED
RIGHT BRUSH MOTOR
75 RED
DIAGRAM A
76 RED
LEFT BRUSH MOTOR
78 RED
77 BLK 5 BRN
6 BLK
ACTUATOR
79 BLK
1 WHT
2 WHT
69 RED
DIAGRAM B
68 GRN/YLW
SOLENOID VALVE
FLOAT SWITCH
75 BLK
76 RED 77 BLK
73 BLK
72 RED 74 RED
72 RED
VAC MOTOR 73 BLK
DIAGRAM C 2 WHT 1 WHT
5 BRN 63 RED
1 62 ORN 68 GRN/YLW 69 RED
PROPEL MOTOR
78 RED
79 BLK
A B C
FORWARD PROPEL SWITCH 63 RED 82 RED 61 BLU
5-43
REVERSE PROPEL SWITCH
62 ORG 82 RED
SABER 24V (SS) 98742 10/27/99
61 BLU 6 BLK
WIRING GROUP – MAIN HARNESS REF
PART NO.
QTY
1
41359
1
DESCRIPTION
SERIAL NO. FROM
NOTES:
HARNESS, MAIN
SABER 24V (SS) 98742 10/27/99
5-44
DECK
29204
29215
BLK
WHT
WIRING GROUP - SCHEMATIC
5-45
SABER 24V (SS) 98742 06/19/01
SUGGESTED SPARE PARTS PART NO.
DESCRIPTION
14606 14717 35122 35211 35212 67393 72093 72130 72165 73938 81535 48012 34337 73790 73959 73889
BREAKER, 30A 50VDC BREAKER, 3A GASKET, VAC MOTOR GASKET, 8.50 X 16.40 GASKET, 6.30 X 16.10 RELAY, 24VDC 100A SWITCH, 125VDC SPST SWITCH, SPST 2-POSITION ROCKER SWITCH, DPDT 3-POSITION ROCKER SPRING, EXTENSION KNOB, 3/8-16 4 PRONG BLADE, SQUEEGEE REAR BLADE, SQUEEGEE FRONT KNOB, 5/16-18 4 PRONG FILTER, VAC SKIRT, SHROUD SKIRT, SHROUD SKIRT, SHROUD
SERIAL NO. FROM
NOTES:
24" ONLY 26" ONLY 28" ONLY
NOTES:
SABER 24V (SS) 98742 03/31/00
5-46
BRAKE OPTION
6
17
3 18 9 16 12
14 10 20
2
11
4 1
19 5 13 21 15 8
5-47
7
SABER 24V (SS) 98742 12/28/99
OPTION - BRAKE REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
57113 57029 66073 66116 66192 66304 67400 70349 73426 80603 80604 80605 80633 80831 87029 87030 89151 89152 89153 89196 140331
4 1 1 1 2 1 1 4 1 1 1 2 2 1 8 5 1 1 2 1 2
DESCRIPTION
SERIAL NO. FROM
NOTES:
NUT, 5/16-18 HEX NYLOCK NUT, 1/4-28 HEX SS PIN, COTTER 1/16" X 3/4"L PLTD PIN, CLEVIS 1/4" X 3/4" PLTD PIN, ROLL 1/4 X 1.25L PIN, CLEVIS 5/16 X 1-1/4 ROD, TORSION BRAKE SCR, 5/16-18 X 2.5 HHCS SPRING, EXT .43D X2.50L X.047W CLEVIS, 1/4" YOKE END 1/4-28 COTTER, 1/4" RING COTTER, 5/16" RING WASHER, .634 D X 1.407 D X .09 T PIN, CLEVIS 5/16" X 1.75"L PLT WASHER, 5/16 FLAT SS WASHER, 3/8 ID X 3/4 OD NYLON PEDAL, BRAKE WELDMT, ROD PRK. BRAKE PAD, BRAKE WELDMENT, BRAKE PEDAL BUSHING, PILLOW BLOCK
SABER 24V (SS) 98742 12/28/99
5-48
EMERGENCY STOP OPTION
2
1
5-49
SABER 24V (SS) 98742 10/27/99
OPTION – EMERGENCY STOP REF
PART NO.
QTY
1 2
72160 88868
1 1
DESCRIPTION
SERIAL NO. FROM
NOTES:
SWITCH, EMERGENCY STOP WIRE, 16" RED/18 STRIP X STRIP
SABER 24V (SS) 98742 10/27/99
5-50
HOUR METER OPTION
2 1 4 5
5-51
3
SABER 24V (SS) 98742 10/27/99
OPTION – HOUR METER REF
PART NO.
QTY
1 2 3 4 5
54154 57078 88772 880242 880243
1 2 1 1 1
DESCRIPTION
SERIAL NO. FROM
NOTES:
METER, 12-48 VDC LED HOUR NUT, 4-40 HEX WIRE, 6" RED/18 76075 X 76114 WIRE, 9" RED/18 76075 X 76114 WIRE, 9" BLK/18 76011 X 76114
SABER 24V (SS) 98742 10/27/99
5-52
OPTION - QUICK SCRUBHEAD CONNECT
4
1
2
5
5-53
SABER 24V (SS) 98742 10/27/99
3
OPTION – QUICK SCRUBHEAD CONNECT REF
PART NO.
QTY
1 2 3 4 5
57112 80654 82191 89121 140389
4 2 1 1 1
DESCRIPTION
SERIAL NO. FROM
NOTES:
NUT, 5/16-18 SERRATED FLG BUMPER, ADJUSTMENT PIN, COTTER HAIR .178 DIA X 1" WELDMENT, SCRUB DECK PIN BRKT, SCRUB HEAD MOUNT
SABER 24V (SS) 98742 10/27/99
5-54
OPTION - SMART SQUEEGEE - 24 IN & 26 IN
5
9
32
6 35
28
34
27 16
36 41
24 3
38
14 11 31
19
17
2 16
22 7
42 23 4
37 43
8
29
13 33
5 44
21
15
18
39
12
1
45 46
40
26
10 25
20 30
5-55
SABER 24V (SS) 98742 10/27/99
OPTION - SMART SQUEEGEE - 24 IN & 26 IN REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
27797 57032 57111 57113 57119 57245 57252 62675 62684 67380 70052 70070 70086 70112 70259 70266 70375 70461 73887 73895 73899 73897 73894 73898 73896 80606 80637 81247 81488 81489 81535 82531 82535 82553 82576 82644 82799 82922 87029 87143 89202 89086 89123 89125 89164 89165 140275 140390 57261 70013
1 2 2 2 3 2 1 1 1 7 2 2 1 2 2 4 1 2 2 1 1 2 2 4 1 1 3 1 1 1 1 1 1 1 1 6 2 2 1 1 1 1 2 2 1 1
DESCRIPTION
SERIAL NO. FROM
CLAMP, STRAIGHT LINE MANUAL NUT, 3/8-16 SERRATED FLANGE NUT, 3/8-16 HEX NUT, 5/16-18 HEX NYLOCK NUT, 3/8-16 HEX NYLOCK SS NUT, 1/4-20 HEX NYLOCK SS NUT, 10-24 HEX NYLOCK SS PLATE, SQUEEGEE RETAINER BLADE PLATE, SQUEEGEE ADJUST LONG RIVET, 5/32 OD X 1/8 GRIP SCR, 8-32 X 3/8 PPHMS SS SCR, 3/8-16 X 2.00 HHCS SS SCR, 10-24 X 1/2 PHMS SS SCR, 1/4-20 X 3/4 CARRIAGE SCR, 5/16-18 X 1.75 HHCS SCR, 3/8-16 X 1.00 HHCS GR5 PLT DL SCR, 5/16-18 X 1/2 HHCS GR5 SCR, 3/8-16 X 3.50 HHCS GR5 PLTD SPRING, 120 DEGREE TORSION SQGE BLADE, REAR LINATEX 37" SQGE BLADE, REAR (TILE) 37" SQGE BLADE, REAR (BUTTONS) 37" SQGE BLADE, FRONT LINATEX 35" SQGE BLADE, FRONT (TILE) 35" SQGE BLADE, FRONT (BUTTONS) 35 COTTER, 3/8 RING PIN, CLEVIS 3/8 X 2.38 SPACER, .500 OD X .391 ID X .300 LATCH, SQUEEGEE STRAP STRIKER, SQUEEGEE STRAP REAR KNOB, SQUEEGEE ADJ. PLATE PLATE, SQUEEGEE ADJUST SHORT SQUEEGEE, 32 IN WELDMENT, REAR SQG. BAND SHORT VIAL, LEVEL OVERLAY, SQUEEGEE PLATE, POINTER BALL, KNOB ADJ. WASHER, 5/16 X 3/4 SS WASHER, 7/16 X 1” FLAT WHEEL, 3" DIA CUSHION RUBBER WHEEL, 5"D X 1" X .5"ID GRY WELDMENT, FRONT SQUEEGEE BAND WELDMENT, BAND REAR-LONG WELDMENT, SQUEEGEE WHEEL RT WELDMENT, SQUEEGEE WHEEL LT BRKT, SQUEEGEE WHEEL SUPPORT BUSHING, SPANNER .435 X 1.10 NUT, 8-32 HEX SS SCR, 8-32 X 3/4 PPHMS SS
SABER 24V (SS) 98742 10/27/99
NOTES:
(STANDARD) (OPTION) (OPTION) (STANDARD) (OPTION) (OPTION)
5-56
OPTION - SMART SQUEEGEE - 28 IN 43 5
6 34
9
28
33
27
35
16 24
40 3
14
37 17 2 16
11 22 19
31
7
41 23
36
4 42
13 32
29
8 21
5 44 15
38
18
1
10
30
12
25
45 46 26
20
5-57
SABER 24V (SS) 98742 10/27/99
39
OPTION - SMART SQUEEGEE - 28 IN REF
PART NO.
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
27797 57032 57111 57113 57119 57245 57252 82518 82532 67380 70052 70070 70086 70112 70259 70266 70375 70461 73887 82529 82638 82641 82528 82637 82640 80606 80637 81247 81488 81489 81535 82531 82514 82553 82576 82799 82922 87029 87143 89202 89086 82558 82525 89164 89165 140275 82644 140390 57261 70013
1 2 2 2 3 2 1 1 1 7 2 2 1 2 2 4 1 2 2 1 1 2 2 4 1 1 3 1 1 1 1 1 1 1 6 2 2 1 1 1 1 2 1 2 1 1
DESCRIPTION
SERIAL NO. FROM
CLAMP, STRAIGHT LINE MANUAL NUT, 3/8-16 SERRATED FLANGE NUT, 3/8-16 HEX NUT, 5/16-18 HEX NYLOCK NUT, 3/8-16 HEX NYLOCK NUT, 1/4-20 HEX NYLOCK SS NUT, 10-24 HEX NYLOCK SS PLATE, SQUEEGEE BLADE RETAINER PLATE, SLIDE SQUEEGEE LONG RIVET, 5/32 OD X 1/8 GRIP SCR, 8-32 X 3/8 PPHMS SS SCR, 3/8-16 X 2.00 HHCS SS SCR, 10-24 X 1/2 PHMS SS SCR, 1/4-20 X 3/4 CARRIAGE SCR, 5/16-18 X 1.75 HHCS SCR, 3/8-16 X 1.00 HHCS GR5 PLT DL SCR, 5/16-18 X 1/2 HHCS GR5 SCR, 3/8-16 X 3.50 HHCS GR5 PLTD SPRING, 120 DEGREE TORSION SQGE BLADE, REAR LINATEX 41" SQGE BLADE, REAR (TILE) 41" SQGE BLADE, REAR (BUTTONS) 41" SQUEEGEE, FRONT BLADE LINATEX SQUEEGEE, FRONT BLADE (TILE) SQUEEGEE, FRONT BLADE (BUTTON) COTTER, 3/8 RING PIN, CLEVIS 3/8 X 2.38 SPACER, .500 OD X .391 ID X .300 LATCH, SQUEEGEE STRAP STRIKER, SQUEEGEE STRAP REAR KNOB, SQUEEGEE ADJ. PLATE PLATE, SQUEEGEE ADJUST SHORT SQUEEGEE, 37 INCH WELDMENT, REAR SQG. BAND SHORT VIAL, LEVEL PLATE, POINTER BALL, KNOB ADJ. WASHER, 5/16 X 3/4 SS WASHER, 7/16 X 1” FLAT WHEEL, 3” DIA. CUSHION RUBBER WHEEL, 5"D X 1" X .5"ID GRY WELDMENT, FRONT SQUEEGEE BAND WELDMENT, REAR SQUEEGEE BAND WELDMENT, SQUEEGEE EXT RT WELDMENT, SQUEEGEE EXT LT BRKT, SQUEEGEE WHEEL SUPPORT OVERLAY, SQUEEGEE BUSHING, SPANNER .435 X 1.10 NUT, 8-32 HEX SCR, 8-32 X ¾ PPHMS SS
SABER 24V (SS) 98742 10/27/99
NOTES:
(STANDARD) (OPTION) (OPTION) (STANDARD) (OPTION) (OPTION)
5-58
LIMITED WARRANTY Windsor Industries, Inc. warrants new machines against defects in material and workmanship under normal use and service to the original purchaser. The warranty period is subject to the conditions stated below.
3 YEARS FOR PARTS AND 1 YEAR FOR SERVICE LABOR Exceptions: Rotationally molded polyethylene tanks carry a 6 year parts and 1 year service ® labor warranty. VERSAMATIC models carry a 3 year warranty on brush motors, vacuum ® motors, and belts, and a 1 year service labor warranty. SENSOR models carry a 2 year warranty on vacuum motors and belts, and a 1 year service labor warranty. Extractor brush ® motors, pump motors, pc boards and electronics, vac motors (other than VERSAMATIC and ® SENSOR ), pumps, and FLEXSOL™ diaphragms, all RADIUS™ and TITAN™ Wet/Dry Vacs carry a 1 year parts and service labor warranty. Propane equipment has a 2 year ® manufactured parts warranty. The Onan engines have a 3 year manufacturers’ warranty. The ® ® Honda /Kawasaki engines have a 2 year manufacturers’ warranty. NOTE: The engine warranty is administered through the engine manufacturer and must be repaired at an authorized service center. Normal wear items including, but not limited to, belts, brushes, capacitors, carbon brushes, casters, clutches, cords, filters, finishes, gaskets, hoses, light bulbs, rectifiers, switches, squeegees, bearings, pulleys, relays, actuating cables, tires, Propane batteries and wheels will be warranted for manufacturing defects for 90 days from the purchase date. The warranty commences on the purchase date by the original end user from an authorized Windsor Agent, subject to proof of purchase. The Machine Registration Card must be completed and returned immediately at the time of purchase. If proof of purchase cannot be identified, the warranty start date is 90 days after date of sale to an authorized Windsor distributor. Parts replaced or repaired under warranty are guaranteed for the remainder of the original warranty period.
90 DAY WARRANTY EXTENSION AVAILABLE Upon receipt of the Machine Registration Card, Windsor will extend the warranty period an additional 90 days from the purchase date. Does not include items warranted 90 days for manufacturing defects.
STATED WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. Any statutory implied warranties, including any warranty of merchantability or fitness for a particular purpose, are expressly limited to the duration of this written warranty. Windsor will not be liable for any other damages, including but not limited to indirect or special consequential damages arising out of or in connection with the furnishing; performance, use or inability to use the machine. This remedy shall be the exclusive remedy of the buyer. This warranty shall not apply to: 1.damage in transit; 2.misuse or abuse(including the use of incompatible or corrosive chemicals or overloading of capacity); 3. failure due to lack of proper maintenance and care (including cleaning); 4.any design alterations performed by an organization not authorized or specified by Windsor; 5.batteries and chargers. 6. high pressure washing. 7.electrical components exposed to moisture. If difficulty develops during the warranty period, contact the authorized Windsor Agent from whom the product was purchased. Windsor, Inc. may elect to require the return of components to validate a claim. Any defective part to be returned must be shipped freight pre-paid to an authorized Windsor Distributor/Service Center or to the Windsor factory.
USE OF PARTS NOT APPROVED BY WINDSOR, INC. WILL VOID ALL WARRANTIES. This warranty is valid only for all products sold after July 1, 1995. A product sold before that date shall be covered by the limited Warranty in effect at the date of sale to the original purchaser.
z 1999 Windsor Industries, Inc. All rights reserved. REVISED 05/01/02
