Transcript
Winegard repair parts are available at many RV dealers and/or service centers nationwide. For the dealer nearest you, call 1-800-288-8094, extension 1, or visit our website at www.winegard.com. RV-2005 Amplified antenna head (replaces RV-2001 and RV2001A)
2120566 Non-amplified antenna head RP-2900 2 Elevating tubes with 2 grommets / 4 pins / 4 retaining rings / adhesive rubber bumper RP-2000 Leveling mount / 4 spacers / 2 pins / 2 rings (for models purchased before 1990)
RP-3000 Elevating gear FC-5932 RG-59 Weatherproof connector (12 pack)
RoadStar™ Antennas Omnidirectional RV TV Antenna Winegard’s RS-2000 RoadStar antenna lets you enjoy television while moving!! This popular mobile antenna is omnidirectional — so it continuously receives VHF/UHF/ FM signals from all directions. You’ll never have to adjust it, even on winding roads. Plus the built-in, solid-state amplifier boosts signals an average of 15 dB on VHF, 20 dB on UHF to deliver clear reception while on the road or parked. Aerodynamically designed, the RoadStar has a stylish high-impact, weather resistant and UV protected housing with no moving parts to break or corrode. RS-2000 includes 30 feet of 75 ohm coax cable, 6 feet coax cable, mounting brackets, hardware, RV-7042 white on/off power supply switch with +12 VDC receptacle and two-way splitter for second TV, on/ off indicator light and convenient cable input. RS-3460...Model RS-3460 includes the RoadStar amplified antenna head and three mounting legs with roof screws in single pack. Power supply and coaxial cable are not included. Ideal for rental units.
Compact Omnidirectional Antenna SA-1001 Ivory preassembled elevating shaft / gear housing / base plate RP-4000 Worm gear and 12.25” hex elevating shaft (complete assembly including: wave washer / flat washer / o-ring / worm gear nut)
RP-4014 Worm gear and 14” hex elevating shaft (complete assembly including: wave washer / flat washer / o-ring / worm gear nut)
Mobile Off-Air Antennas
Model RS-1500 omnidirectional antenna has an up-to-date aerodynamic design. Includes a black wall plate power supply for amplification (wall plate can be flush or surface mounted inside the vehicle), and a sturdy 1 inch aluminum pipe mount. RS-1500 has auxiliary input for cable or satellite reception; turn power supply off and auxiliary input is automatically connected. RS-1560...Model RS-1560 does not include power supply and coaxial cable.
! W E N
Motorized Sensar® Antenna MA1000W
All Antennas made in USA
RP-2049 Gear housing / 2 pins / bearing / o-ring seal / 2 retaining rings / nut RP-3523 Base plate / 10 screws / rubber boot RW-2000 Outside roof wedge (used on slanted roofs)
IW-5000 Interior roof wedge (used on slanted ceilings)
RP-0154 Boot (only needed for Sensar I and II)
RP-6200 Ivory RP-6300 White Directional handle / ceiling plate / 4 screws / spring (RP-6822 included) / decal RP-6822 Spring RP-2658 Nylon bearing RP-5895 Ivory RP-6795 White Crank / set screw / hex shaft RP-5000 Crank / set screw / round shaft
Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601 Phone 1-800-288-8094 • Fax 1-800-247-8221 www.winegard.com
Printed in U.S.A. © 2006 Winegard Company Rev 2/07 WS-83
The Signal You’ve Been Looking For™
Motorized Sensar® Antenna If you are one of the millions of RVers who use the traditional Sensar® antenna, you are definitely going to want to experience our NEW Motorized Sensar® MA1000W. The traditional Sensar antennas are reliable and dependable - but you’re going to love and appreciate the ease of use the Motorized Sensar antenna offers. Simply push a button from inside your RV.
At last - no more hand cranking! Simply push a button on the wall plate control to raise, rotate or stow the antenna.
The antenna is cable-ready with a built-in amplifier for exceptional VHF/UHF reception when parked. This antenna is bi-directional and must be pointed toward the station you want to watch. The antenna head is made of tough UV protected Centrex® polymer and the base is corrosion resistant aluminum.
Raises to 33-1/2” in full raised position and stows to only 5-1/2” for travel. Requires 13.5” x 66” roof space with a turning diameter of 52”. Antenna and mount weighs only 11.25 lbs. Shipping weight 20 lbs. Package includes antenna, white wall plate control panel, white RV-7042 power supply switch with +12 VDC receptacle, built-in 2-way splitter for second TV, power on/ off indicator light, and cable TV input. Also includes 25 feet of control and coaxial cables and mounting hardware.
Sensar® head U.S. Patent D500,496 and Patent Pending
Sensar® Antenna You’ll enjoy local programming when you park your RV and point this antenna in the right direction. You can raise, lower and rotate the Sensar antenna with the hand crank inside your recreational vehicle. It’s easy to install, extends only four inches above the roof while traveling and can be elevated to 40 inches above the roof line when parked.
The 75 ohm Sensar RV-3095 antenna has unique circuitry and a built-in amplifier for The Hand Crank Assembly inside clear VHF/UHF reception. your recreational The antenna head is fabricated vehicle is used to from tough UV protected raise, rotate and Centrex®* polymer and other stow the antenna. materials that will not corrode. Model RV-3095 has standard 36 inch elevating tubes and Sensar head - U.S. Patent includes 20 feet of 75 ohm D500,496 and Patent Pending coaxial cable, 6 foot coaxial *Centrex is a registered trademark of Bayer Corporation. cable for TV set, mounting hardware and an RV-7042 white wall plate/power supply with push button on/off switch with LED, +12 VDC Made in USA receptacle, built-in two-way splitter for second TV and cable TV input. ®
Wall Plate Control Power Light - above Power Button shows blue when power to control panel is on.
Raised Light - shows yellow when antenna is in full raised position. Motion Light - shows blue anytime antenna motor is moving. Stowed Light - shows green when antenna is in down position.
Features and Benefits
• Durable Mount • Quiet Operation • Easy to Use • One Button Raise/Rotate/Stow • Obstruction Warning Indicator • Stows Manually if Power Outage Occurs
The Raised, Motion & Stowed lights also function together to show obstruction. (All three lights blink when obstruction occurs.)
Made in USA
Non-amplified Sensar...75 ohm non-amplified version of RV-3095, RV-5095 is for all types of recreational vehicles. Includes antenna, lift assembly, rotating handle, elevating crank assembly and 20 feet 75 ohm coaxial cable. Wall plate amplifier RA-7296 is recommended. Amplified Sensar antenna and lift...Model RV-7095 is a Sensar antenna that includes only the amplified antenna head and lift assembly with white interior control parts. Power supply and coaxial cable are not included with this model.
