Wireless Ethernet Transmission

Transcript

Video | Audio | Data | Ethernet Wireless Ethernet Transmission Industrially Hardened Wireless Ethernet Transmission Power, Point and Play. Power up and point the units and start transmitting Ethernet. The ComNet NetWave® line consists of an easy, pre-packaged Point-to-Point kit that contains everything you need to establish remote connectivity to Ethernet edge devices. Also available are Point-to-Multipoint models that allow multiple client/camera/networked edge device locations to connect to a single access point. NetWave® will support throughput of up to 500 Mbps in a single radio version and up to 240 Mbps in the dual radio models. It supports a wide range of Ethernet devices. NetWave® is secure and uses encryption to prevent unauthorized access to the network. These industrially hardened units with Ethernet Interfaces offer the option to be powered by a PoE switch or a Midspan Power Injector. Product Category Page Point-to-Point Kits 3 Point-to-Multipoint 4 High Throughput 5 Ultra High Throughput 6 High Density 7 Solar Power 8 Battery Backups 9 Accessories 10 Features ›› Industrially hardened 5GHz solutions for outdoor applications ›› Up to +30 dBm RF output power ›› Distances up to 2 mi (FCC) or 2km (ETSI) ›› Internal directional antenna: ›› 19dBi 17° beamwidth for full size units ›› 16dBi 30° beamwidth for mini units ›› External antennas available for added configuration flexibility ›› Secure transmission: WPA2 – AES or TKIP encryption 2 ›› Exclusive ComNet antenna alignment feature eases installation and setup ›› Distance adjustments for longrange transmission ›› IEEE 802.3at (PSE) compliant support (NW7[E], NW9[E], NW10[E], NW10DR models) ›› Ruggedized heavy duty enclosures meet class IP67 dust and water ingress protection standards ›› Lifetime Warranty www.comnet.net NetWave Kits: A Complete Hardened Point-to-Point Wireless Ethernet Solution These preconfigured industrial kits include a factory-paired Access Point and Client, plus the power supplies and mounting equipment to install and connect them. The NetWave® NWK series offers a complete package solution containing everything you need to transmit a single Ethernet data stream between a Client remote location and the Access Point or head end. A simple antenna alignment feature provides easy to read visual indicators that show when the antennas are correctly aligned and the link is established. Kit Includes ›› Client (Remote) and Access Point (Head End) in ruggedized IP67 rated heavy duty enclosures ›› Internal Dual Polarized Directional Antenna ›› Distances up to 2 mi (FCC) or 2km (ETSI) ›› Two mounting hardware assemblies ›› Units can optionally be powered by an IEEE 802.3at/ IEEE 802.3af PoE switch ›› Lifetime Warranty NetWave® Wireless Ethernet Point-to-Point Kits Product Group NWK1 Operating Temp Range NWK1/M NWK7 NWK7/M NWK9 NWK10 -40° to +75° C -40º to +75º C -40° to +70° C -40° to +70° C -40° to +70° C -40° to +75°C Power 48 VDC Passive Power Injector or PoE Internal Dual Polarized Directional Antenna / Beamwidth Throughput (Under Ideal Conditions) 19dBi / 17º 16dBi / 30º 19dBi / 17º 16dBi / 30º 19dBi / 17º 19dBi / 17º 95 Mbps 95 Mbps 240 Mbps Total Throughput 240 Mbps Total Throughput 500 Mbps Total Throughput 240 Mbps Total Throughput This chart references FCC NetWave models. For ETSI models, please refer to the appropriate data sheets or contact ComNet’s International Design Center. Typical Point-to-Point Application 10/100 Ethernet PC NVR ComNet Gigabit Managed Switch with 30W PoE+ PoE Ethernet PoE Access Point Client PIM or other PSE device Ethernet Power IP Camera LEGEND WIRELESS POWER CAT5 ETHERNET 3 NW1/NW2 Point-to-Multipoint The NetWave® NW1 and NW2 user-configurable units can be set up through the embedded User Interface as a Client or as an Access Point. Available as region-specific models for North America and Europe in both standard and smallsize enclosures, these hardened point-to-multipoint models allow multiple Ethernet endpoints to be connected to a central Access Point. An easy to read LED array displays unit operational status along with received signal strength ensuring optimal installation and operation. These units may be powered from an IEEE 802.3af PoE source. Features ›› Internal Dual Polarized Directional Antenna ›› 5 GHz operating bandwidth ›› Transmit power: +26 dBm ›› Includes power injector Ordering Information Part No. Description NW1 Industrial Point-to-Multipoint Unit, 19 dBi 17º beamwidth directional antenna (FCC NA Region) NW2 Industrial Point-to-Multipoint Unit, 19 dBi 17º beamwidth directional antenna (ETSI EU Region) NW1/M Mini Industrial Point-to-Multipoint Unit, 16 dBi 30º beamwidth directional antenna (FCC NA Region) NW2/M Mini Industrial Point-to-Multipoint Unit, 16 dBi 30º beamwidth directional antenna (ETSI EU Region) Point-to-Multipoint Application IP Cameras NW1 (Client) Ethernet PIM or other PSE device Ethernet Power PIM or other PSE device Ethernet Power PIM or other PSE device Ethernet Power PoE NW1 (Client) 10/100 Ethernet PC NVR ComNet Gigabit Managed Switch with 30W PoE+ PoE Ethernet PoE NW1/IA870 (Recommended Access Point) NW1 (Client) Ethernet LEGEND WIRELESS P1 PORT 1 PD P2 PORT 2 PSE CAT5 POWER ETHERNET 4 50Ω COAX www.comnet.net NW7[E][/M] High Throughput The NetWave® NW7[E][/M] environmentally hardened High Throughput (HT) wireless Ethernet transmission device can be configured through the embedded User Interface as a Client or as an Access Point. This single radio model was designed for high throughput point-to-point or multi-point applications and comes with an integrated directional antenna. Features ›› High throughput using MIMO technology: ›› Up to 180 Mbps in one direction ›› Up to 240 Mbps total full duplex ›› Over current protection and 3 layers of Ethernet surge suppression on the PD port ›› High Throughput Back Haul Link (full size units only) for installations that require connecting to more than one Ethernet device ›› Port 1 supports 802.3at PD PoE power, Port 2 (full size units only) provides IEEE802.3at PSE PoE power Ordering Information Part No. Description NW7 Industrial Single Radio, 2 × Gbps Ethernet Ports, 19 dBi 17º beamwidth directional antenna (FCC NA Region) NW7E Industrial Single Radio, 2 × Gbps Ethernet Ports, 19 dBi 17º beamwidth directional antenna (ETSI EU Region) NW7/M Mini Industrial Single Radio, 1 × Gbps Ethernet Port, 16 dBi 30º beamwidth directional antenna (FCC NA Region) NW7E/M Mini Industrial Single Radio, 1 × Gbps Ethernet Port, 16 dBi 30º beamwidth directional antenna (ETSI EU Region) High Throughput Point-to-Point Topology NW1 (Client) Ethernet PIM or other PSE device Ethernet PoE 1Gbps Ethernet NW7 (Access Point) NW10DR (Client) NW1 (Client) Ethernet Power IP Camera PIM or other PSE device Ethernet Power P1 PoE PoE P1 PoE+ ComNet Gigabit Managed Switch with 30W PoE+ Connected to Network NW1 (Client) Ethernet CNGE1IPS or any PSE device LEGEND WIRELESS P1 PORT 1 PD P2 PORT 2 PSE CAT5 POWER ETHERNET IP Camera NWAVBSA1 External Antenna PoE PIM or other PSE device Ethernet Power IP Camera 50Ω COAX 5 NW9[E] Ultra-High Throughput, Impact-Resistant Wireless Ethernet The NetWave® NW9[E] ultra-high throughput, impact-resistant hardened wireless Ethernet transmission devices that can be configured as a Client or as an Access Point. Simple to deploy and cost-effective alternative to physical connections to Ethernet edge equipment, this single radio model was designed for high throughput point-to-point or multi-point applications and comes standard with an integrated 19dBi, 17º beam-width antenna. The NW9[E] supports up to 500 Mbps throughput using 802.11ac MIMO technology. The units can be powered by an 802.3af/at PoE compliant device or through a sold-separately PoE injector with the second Ethernet port serving as an IEEE802.3at power source. Features ›› Sturdy cast aluminum enclosure ›› 5GHz wireless radio ›› Up to 500 Mbps throughput ›› IEEE802.3at PoE Compliant PD and PSE ›› Distances up to 2 mi (FCC) with MAC Lock enabled ›› Ruggedized heavy duty IP67 rated enclosures Ordering Information Part No. Description NW9 Individual Hardened Single Radio, 2 × Gbps Ethernet Ports (FCC NA Region) NW9E Individual Hardened Single Radio, 2 × Gbps Ethernet Ports (ETSI EU Region) Point-to-Point Topology (Shown with PoE Injector and PoE Powered Cameras) 1Gbps Ethernet NW9 (Access Point) NW9 (Client) Ethernet CNGE1IPS or any PSE device Power Ethernet P1 PoE IP Camera P2 PoE Ethernet ComNet Managed Switch with 30 W PoE+ Connected to Network PoE PoE Camera LEGEND WIRELESS P1 PORT 1 PD P2 PORT 2 PSE CAT5 POWER ETHERNET 6 50Ω COAX www.comnet.net NW10[E] High Performance Wireless for High Density Environments The NetWave® NW10[E] wireless radio is ideal for high-capacity and scalable deployments where channel overlapping and interference typically causes instability in competitive radios. The wide range of available channel spectrum widths gives you the option of narrowing channel bandwidths as the network grows, to increase the number of non-overlapping channels and improve stability. These units can be powered by an IEEE 802.3af/at PoE compliant switch or a sold-separately PoE injector. The NW10[E] comes standard with an integrated antenna and an IP67 rated impact resistant ABS enclosure that is designed to survive the most extreme conditions. Features ›› Scalable - Narrow Channel 5 and 10 MHz Bandwidths ›› Expand your WLAN without losing reliability ›› Up to 240 Mbps Throughput ›› IEEE802.3at PoE Compliant PD on port 1 ›› IEEE802.3af power source (PSE) available on port 2 Ordering Information Part No. Description NW10 Industrially Hardened Narrow Bandwidth Wireless Radio (FCC NA Region) NW10E Industrially Hardened Narrow Bandwidth Wireless Radio (ETSI EU Region) Redundant Ring Topology (Shown with PoE and 24VAC Powered Cameras) 1Gbps Power P1 CNGE1IPS or any PSE device P2 ComNet Managed Switch with 30 W PoE+ Connected to Network NW10 (Access Point) NW10 (Client) PoE Camera LEGEND WIRELESS P1 PORT 1 PD P2 PORT 2 PSE CAT5 POWER ETHERNET 50Ω COAX 7 NW10DR High Throughput and Scalable Dual Radio Wireless Bridge The NetWave® industrially hardened narrow bandwidth dual wireless radio is used for redundant ring and drop & repeat topologies when used with an external antenna. Radio 1 is an internal antenna while radio 2 has dual connectors for an external antenna. The wide range of channel spectrum widths available on the NW10DR series of radios gives user options for either high throughput or more non-overlapping channel options commonly required for noisy or dense radio deployments. Using the NW10DR will increase the number of available non-overlapping channels while improving stability in crowded RF environments. The NW10DR is FCC certified for use in North America. Features ›› Scalable - Narrow Channel 5 and 10 MHz Bandwidths ›› Expand your WLAN without losing reliability ›› Up to 240 Mbps Throughput ›› IEEE802.3at PoE Compliant PD on port 1 ›› IEEE802.3af power source (PSE) available on port 2 Ordering Information Part No. Description NW10DR Industrially Hardened Dual Radio Narrow Bandwidth Wireless Bridge, (FCC NA Region) Redundant Ring Topology (Shown with PoE and 24VAC Powered Cameras) PoE Camera CNGE1IPS or any PSE device PoE+ NWAVBSA1 External Antenna NW10DR NWAVBSA1 External Antenna Surveillance Network Building or Other Obstacle PoE ComNet Gigabit Managed Switch with 30W PoE+ PoE+ NW10DR NW10DR NWAVBSA1 External Antenna LEGEND WIRELESS P1 PORT 1 PD P2 PORT 2 PSE CAT5 POWER ETHERNET 8 ComNet Gigabit Managed Switch with 30W PoE+ STP Blocked Port NW10DR 24VAC 50Ω COAX NWAVBSA1 External Antenna PIM IP Camera PoE Camera www.comnet.net NWKSP(X) Solar Power for Wireless Ethernet NetWave® Solar kits provide remote power to networked edge equipment, and include a high quality photovoltaic solar panel, outdoor enclosure with gasketed hinged door and tamper proof locks, power controller and power injection module, all the mounting hardware and is available with or without sealed lead acid batteries. The equipment can be mounted to a twoto-four inch (five to ten centimeter) pole or to a wall with the included mounting hardware. The included controller protects against overcharge and over discharge while optional high performance batteries give the best available deep discharge and temperature performance. Solar Power Kit Comparison NWKSP1 Continuous Power NWKSP2 NWKSP3 NWKSP4 15 W 15 W 30 W 30 W Peak Sunlight 6 Hours 3 Hours 6 Hours 3 Hours Battery Capacity 110 Ah 110 Ah 220 Ah 220 Ah Battery Voltage 12 V 12 V 24 V 24 V 40 Hours¹ 40 Hours¹ 40 Hours¹ 40 Hours¹ 48 V 48 V 48 V 48 V 162 lb / 73 kg 179 lb / 81 kg 299 lb / 135 kg 418 lb / 189 kg Reserve Time PoE Output Voltage System Weight with Batteries² [1] Includes 25% battery derating for moderately low temperatures. [2] Kits are optionally available without batteries included. Ordering Information Part No. Description NWKSP1 15 W continuous power solution with 120 W Solar Panel NWKSP2 15 W continuous power solution with 240 W Solar Panel NWKSP3 30 W continuous power solution with 240 W Solar Panel NWKSP4 30 W Continuous power solution with 480 W Solar Panel Included Enclosure, Controller, Solar Panel, Cables, Mounting hardware for the Solar Panel and Enclosure Typical Solar Power Topology LEGEND WIRELESS Solar Panels NWKSP4 POWER ETHERNET – + Controller Battery PORT 1 PD P2 PORT 2 PSE PoE PoE Ethernet Ethernet 50Ω COAX PoE Injector – + P1 CAT5 NW7 PoE Camera 9 NWKBB100/NWKBB200 DC-Battery Power Management System The NetWave® DC-Battery Power Solutions provide consistent power for your devices in locations where power is on a timer or they have frequent blackouts or brownouts. Includes Smart Controller, Enclosure, Batteries and Mounting Kit Ordering Information Part No. Description NWKBB100 Individual DC-Battery Backup system with 4 × 24Ah 12V batteries NWKBB200 Individual DC-Battery Backup system with 4 × 50Ah 12V batteries Backup Power Topology Main Power OFF Power PoE NWKBB100 LEGEND supplies power Ethernet NetWave® Unit PoE Camera WIRELESS POWER CAT5 ETHERNET Optional Accessories CNGE1IPS NWAVBSA1 NWADA1 NWBKT Ordering Information and Compatibility Compatibility (Includes any applicable ETSI models) Part No. Description NW1 NW1/M NW7 NW7/M NW9 NW10 NW10DR /IA870 Internal 8 dBi, 70º beam width 5 GHz antenna – • – • – – – NWAVBSA1 External Dual Polarization 4.9-5.8 GHz 16dBi Variable Beam Sector Antenna † – † – – † • NWAODA1 External Omni Directional Dual Band ([email protected] / 5dBi@5GHz) Antenna, N-type Connector, 45º and 90º Articulating Joint † – † – – † • NWADA1 External Dual Polarization 4.9-5.8GHz 19dBi 17º Beamwidth Directional Antenna – – – – – – • /EXA External N-type Antenna Option • – • – – • – CNGE1IPS 35W PoE Injector – – • • • • • NWBKT Articulating Wall Mount Bracket • – • – – • • [†] Compatible, requires /EXA model option. 10 www.comnet.net NetWave Resources The NetWave® DC-Battery Power Solutions provide consistent power for your devices in locations where power is on a timer or they have frequent blackouts or brownouts. Includes Smart Controller, Enclosure, Batteries and Mounting Kit Case Study: Vietnam Veterans Wall ComNet supports a traveling memorial installation. Scan this QR Code to read the full case study, or visit http://bit.ly/ComNet-case-studies Installation Video: Power Point and Play With a NetWave® NWK point-to-point kit, it really is that simple! Scan this QR Code to view a video of the quick and easy installation process, or visit http://bit.ly/NWK-setup y Hardened Environmentall s Ethernet Kit put Wireles High Through NWK7[E] -40º TO 70ºC 802.3af/at 15W IP67 S ns that require Link for installatio ut Back Haul device › High Throughpmore than one Ethernet g to connectin ity connectiv e to physical PoE Camera tive alternativ › Ideal for cost-effec nt deploy and edge equipme › Simple to mandate ns to Ethernet ay issues connectio where right-of-w n of Ethernet › Integratio cations Detection wireless communi and Video ion networks signalizat › ITS traffic Systems (VDS) systems ed video ce, and traffic-bas surveillan › Multicast CCTV ritical assets and city center › ITS roadside high-value or mission-c ical ce of uring, petrochem surveillan manufact industrial cations in and other communi facilities, in harsh or › Wireless er treatment ns operating , wastewat applicatio refineries n and control automatio ents ce nt environm surveillan out-of-pla perimeter video and substation › Electrical APPLIC ATION FEATU RES ut: direction › High throughp Mbps in one duplex - Up to 180 full Mbps total - Up to 240 Warranty t PD surge at PoE Complian of Ethernet › IEEE802.3 and 3 layers protection › Over current PD port on on the suppressi t Complian (ETSI) › 802.11a/n (FCC) or 2km up to 2 mi › Distances -40º to +70ºC entally Hardened n protection immersio › Environm and water IP67 dust › Meets class standards only): (EU Region › ETSI Standards Frequency Selection – DFS Dynamic Power Control n encryptio – TPC Transmit – AES or TKIP n ion: WPA2 installatio › Secure transmiss t feature eases Antenna alignmen › ComNet and setup Survey Tools › RF Spectrum t Tools with Alignmen al status along › Antenna operation displays unit › LED array signal strength received › Lifetime TY LIFETIME WARRAN SUPPOR .NET TECH WWW.COMNET ComNet.net Has Complete Product Documentation 2 ut (HT) High Throughp ut point-toentally hardened for high throughp d 19dBi, 17º environm designed ® NWK7[E] an integrate ion kits are ut using The NetWave comes with transmiss throughp Each unit t up to 240Mbps wireless Ethernet nt applications. complian units support an 802.3af/at PoE port point or multi-poi by The NW7[E] Ethernet th antenna. can be powered with the second beamwid for use in gy. The units PoE injector FCC certified in the MIMO technolo a sold-separately NWK7 is for use source. The through certified device or 3af power and TPC an IEEE802. is ETSI, DFS serving as and the NWK7E North America Union. European The complete NetWave® product line is listed on ComNet’s website, along with data sheets, quick start guides, and intruction manuals. Scan this QR Code or visit http://bit.ly/NetWave-Products T: 1.888.678.9427 The Possibilities Are Endless ComNet’s NetWave® wireless Ethernet Products create a network that’s as flexible as you need it to be. There are too many possible applications to show them all in this brochure! Scan this QR Code to access the NetWave® Wireless Network Application Design Guide, or visit http://bit.ly/Wireless-Design-Guide 11 Technical Support Delighting the Customer The ComNet Technical Support and Design Center provides pre-sale and post-sale support for Ethernet transmission network and fiber optic system design. The department is staffed by some of the most highly experienced, regarded and recognized experts in the industry. Our direct Design Center phone number is 1-888-678-9427 or you can call 1-203-796-5300 in the US or +44 (0)113 307 6409 throughout Europe and ask for the Design Center, or contact us by E-mail at [email protected] ComNet’s Customer Care Center is here to provide solutions. Staffed by experienced, knowledgeable, and courteous representatives, the ComNet Customer Care team is there to help. Customer Care representatives are available to answer your questions concerning pricing, product availability, order status, shipping dates, returns, warranty claims and so much more. We’re so confident in the long-term reliability of our products, we back them with a no-questions-asked Lifetime Warranty. Product Training and Education ComNet offers a full curriculum of fiber optic and Ethernet product training designed to educate you to make the right choices when selecting transmission equipment for your projects. Available online or in person, ComNet training qualifies for CEU credit. Travel light! This brochure and other ComNet product literature is available online. Scan this QR Code with your mobile device, or visit http://bit.ly/ComNet-Product-Literature www.comnet.net 3 Corporate Drive | Danbury, CT 06810 | USA T: 1 (203) 796-5300 | F: 1 (203) 796-5303 Tech Support: 1 (888) 678-9427 [email protected] 8 Turnberry Park Road Gildersome | Morley | Leeds, UK LS27 7LE T: +44 (0)113 307 6400 [email protected] © 2017 Communication Networks. All Rights Reserved. “ComNet,” the “ComNet Logo,” “NetWave” and the “NetWave Logo” are trademarks of Communication Networks. ComNetB10 – Rev. 28 Feb 17 AGENCYCOMPLIANCE COMPLIANCE AGENCY COMPLIANCE AGENCY