Transcript
WIRELESS PRODUCT ORDERING GUIDE
Table of Contents Corning Optical Communications Wireless Overview Corning Optical Communications Wireless Portal Corning ONE™ Wireless Platform
Overview
Headend Equipment
Cabling and Hardware Solutions
Headend Equipment Actives
Passives
MobileAccess1000/2000 Platform Overview
Remote End Equipment Public Safety
Services
360 Environment
Corning Optical Communications Wireless Overview
Corning offers a complete portfolio of flexible wireless solutions designed to address the ever-growing demand for wireless – from fiber connectivity solutions for remote radios to base station connectivity, to distributed antenna systems (DAS) that enable indoor wireless coverage and capacity. Paired with Corning’s revolutionary enhancements to fiber optics, we offer connectivity solutions to satisfy the next generation of network requirements and enable a full wireless ecosystem. Don’t see what you are looking for? Contact Corning at 1-866-436-9266 or email
[email protected].
CMA-282-AEN | Page 3
Corning Optical Communications Wireless Portal Designed to give you easy, one-click access to a wealth of online resources that will help you learn everything you need to know about Corning Optical Communications Wireless products.
Resources: • Datasheets • Estimating tools • User manuals • Quick installation sheets • Design tools • Project management tools
Register now! www.corning.com/opcomm/cmaportal
CMA-282-AEN | Page 4
Overview Headend Equipment Actives Passives
CMA-282-AEN | Page 5
Corning ONE™ Wireless Platform
Corning ONE™ Wireless Platform
Corning ONE™ Wireless Platform
Corning ONE™ Wireless Platform
The Corning ONE™ Wireless Platform is the first all-optical converged solution that unifies cellular, Wi-Fi and Ethernet backhaul. Fiber-to-the-edge technology allows for virtually unlimited bandwidth to support the growing demands of wireless users. The optical fiber infrastructure is easily deployed via a wide range of preterminated composite cables and supports a variety of advanced end-toend equipment. Easy to design, Plug & Play™ assemblies significantly reduce installation cost and deployment time. Optional Gigabit Ethernet support enables off-load, expansion, and best use of Wi-Fi resources while the integrated antenna provides flexibility for ease and cost-effective MIMO upgrades. The Corning ONE Wireless Platform supports cost savings by reducing parallel infrastructure deployments while simultaneously providing end users with a cost-effective, scalable, future-ready infrastructure. Architecture Overview: MDF
IDF
Remote
Remote Access Unit (RAU)
CMA-282-AEN | Page 6
Fiber Management Unit
Interconnect Unit (ICU)
Optical Interface Unit (OIU)
Central Ethernet Unit (CEU)
Headend Unit (HEU)
Ethernet Switch Ethernet Devices
Corning ONE™ Equipment Headend Unit (HEU)
The headend unit (HEU) conditions the incoming radio frequency (RF) downlink (DL) signals from an operator’s signal source. The HEU then custom tunes the signals to ensure a consistent level of RF before signals are passed to/from the optical interface unit (OIU). A single HEU supports up to 12 radio interface modules (RIMs) and up to three sectors. This solution is a field-upgradable modular unit and can be expanded to support up to four HEUs and up to 48 RIMs.
Optical Interface Unit (OIU)
The optical interface unit converts RF downlink (DL) signals received from the HEU into an optical signal. This optical signal is then transported over single-mode optical fiber cabling through the interconnect unit (ICU) to the remote access unit (RAU), which is located at the edge of the network. A single OIU supports up to 12 optical interface modules (OIMs). A single OIM supports up to three remote access units (RAUs) for a total of 36 remote access units per OIU with the ability to scale to four OIUs; supporting 144 RAUs with a state-of-the-art sectorization feature to support up to three sectors through software. Leveraging the 1:1 optical capabilities of the Corning ONE™ Wireless Platform allows for greater visibility, support, and integration to future applications such as spectrum monitoring and LBS solutions.
CMA-282-AEN | Page 7
Corning ONE™ Equipment Fiber Management Unit (FMU)
Pretium EDGE® HD solutions are high-density preterminated optical cabling solutions offering industry-leading connector density. With unprecedented finger access, there is no need for additional tools enabling faster moves, adds, and changes (MACs). The Pretium EDGE Solutions housing contains sliding trays that can accommodate as many as four 12-fiber modules per tray, resulting in improved finger access to connectors and allowing for individual access without compromising the optical connectivity of other ports. Front jumper management guides on each tray allow for jumpers to be routed to the left or right. External jumper routing guides facilitate proper slack management to ensure drawer movement. Industry-leading port labeling is available on the rear side of the housing's front door, and each housing includes mounting plug receptacle areas at the rear, which enable fast and easy installation and strain-relief of Pretium EDGE Solutions trunk cables. Brush cable entries make trunk entry quick and easy.
Central Ethernet Unit (CEU)
The central Ethernet unit provides centralized media conversion from Ethernet to fiber. It unifies Ethernet and cellular over single media and enables Ethernet backhaul and POE+. The CEU houses up to three centralized Ethernet modules (CEMs) supporting four Ethernet ports per module.
Interconnect Unit (ICU)
The interconnect unit injects power from a central location into a composite cable to power the remote access units (RAU) located throughout the building. Centralizing the power supply significantly reduces IDF rack space requirements and eases maintenance. The ICU supports up to eight RAUs or in an Ethernet-enabled solution; four RAUs plus four Gigabit Ethernet modules (GEMs) can be supported from a single ICU.
CMA-282-AEN | Page 8
Corning ONE™ Wireless Platform Equipment Remote Access Unit (RAU)
The remote access unit supports four cellular services (CELL/PCS/700 LTE/AWS) and can expand via a remote expansion unit (RxU) to support two additional bands or MIMO services in a single unit. The RAU has built-in MIMO capabilities and modular support for a Gigabit Ethernet PoE+ upgrade.
Headend Unit (HEU)
Optical Interface Unit (OIU)
Fiber Management Unit (FMU)
Radio Interface Module (RIM)
Optical Interface Module (OIM)
Central Ethernet Unit (CEU)
Interconnect Unit (ICU)
Remote Access Unit (RAU)
Remote Expansion Unit (RxU)
| Photo CMA422
| Photo REN277
| Photo CMA366
| Photo CMA428
| Photo CMA433
| Photo CMA364
| Photo LAN2318
| Photo REN210
| Photo REN348
CMA-282-AEN | Page 9
Corning ONE™ Wireless Platform |
Hardware Ordering Information
Headend Unit (HEU) Chassis Part Number
CMA-282-AEN | Page 10
Product Description
HEU-1-00-1-A-H
1-Headend Unit (HEU), 1-ETM, 1-RIX, 1-PSM-AC, 1-HCM
HEU-1-00-2-A-H
1-HEU, 1-ETM, 1-RIX, 2-PSM-AC, 1-HCM
HEU-1-00-1-A-A
1-HEU, 1-ETM, 1-RIX, 1-PSM-AC, 1-ACM
HEU-1-00-2-A-A
1-HEU, 1-ETM, 1-RIX, 2-PSM-AC, 1-ACM
HEU-2-00-1-A-H
1-HEU, 2-RIX, 1-PSM-AC, 1-HCM
HEU-2-00-2-A-H
1-HEU, 2-RIX, 2-PSM-AC, 1-HCM
HEU-2-00-1-A-A
1-HEU, 2-RIX, 1-PSM-AC, 1-ACM
HEU-2-00-2-A-A
1-HEU, 2-RIX, 2-PSM-AC, 1-ACM
HEU-1-00-1-D-H
1-HEU, 1-ETM, 1-RIX, 1-PSM-DC, 1-HCM
HEU-1-00-2-D-H
1-HEU, 1-ETM, 1-RIX, 2-PSM-DC, 1-HCM
HEU-1-00-1-D-A
1-HEU, 1-ETM, 1-RIX, 1-PSM-DC, 1-ACM
HEU-1-00-2-D-A
1-HEU, 1-ETM, 1-RIX, 2-PSM-DC, 1-ACM
HEU-2-00-1-D-H
1-HEU, 2-RIX, 1-PSM-DC, 1-HCM
HEU-2-00-2-D-H
1-HEU, 2-RIX, 2-PSM-DC, 1-HCM
HEU-2-00-1-D-A
1-HEU, 2-RIX, 1-PSM-DC, 1-ACM
HEU-2-00-2-D-A
1-HEU, 2-RIX, 2-PSM-DC, 1-ACM
IHU-2-11-1-A-H
1-IHU, 1-RIX, 1-OIX, 1-ECRF, 1-PSM-AC, 1-HCM
IHU-2-11-2-A-H
1-IHU, 1-RIX, 1-OIX, 1-ECRF, 2-PSM-AC, 1-HCM
IHU-2-11-1-A-A
1-IHU, 1-RIX, 1-OIX, 1-ECRF, 1-PSM-AC, 1-ACM
IHU-2-11-2-A-A
1-IHU, 1-RIX, 1-OIX, 1-ECRF, 2-PSM-AC, 1-ACM
IHU-2-11-1-D-H
1-IHU, 1-RIX, 1-OIX, 1-ECRF, 1-PSM-DC, 1-HCM
IHU-2-11-2-D-H
1-IHU, 1-RIX, 1-OIX, 1-ECRF, 2-PSM-DC, 1-HCM
IHU-2-11-1-D-A
1-IHU, 1-RIX, 1-OIX, 1-ECRF, 1-PSM-DC, 1-ACM
IHU-2-11-2-D-A
1-IHU, 1-RIX, 1-OIX, 1-ECRF, 2-PSM-DC, 1-ACM
Corning ONE™ Wireless Platform |
Hardware Ordering Information
Headend Unit (HEU) Modules Part Number
Product Description
RIX
Corning ONE™ Radio Interface Extender
RIM-C85
Corning ONE Radio Interface Module, CELL
RIM-P19
Corning ONE Radio Interface Module, PCS
RIM-A17
Corning ONE Radio Interface Module, AWS
RIM-A17-M
Corning ONE Radio Interface Module, AWSM (MIMO)
RIM-L70
Corning ONE Radio Interface Module, LTE
RIM-L70-M
Corning ONE Radio Interface Module, LTEM (MIMO)
Optical Interface Unit (OIU) Chassis Part Number
Product Description
OIU-1-00-1-A-A
1-Optical Interface Unit (OIU), 1-ETM, 1-OIX, 1-PSM-AC, 1-ACM
OIU-1-00-2-A-A
1-OIU, 1-ETM, 1-OIX, 2-PSM-AC, 1-ACM
OIU-2-00-1-A-A
1-OIU, 2-OIX, 1-PSM-AC, 1-ACM
OIU-2-00-2-A-A
1-OIU, 2-OIX, 2-PSM-AC, 1-ACM
OIU-1-00-1-D-A
1-OIU, 1-ETM, 1-OIX, 1-PSM-AC, 1-ACM
OIU-1-00-2-D-A
1-OIU, 1-ETM, 1-OIX, 2-PSM-AC, 1-ACM
OIU-2-00-1-D-A
1-OIU, 2-OIX, 1-PSM-AC, 1-ACM
OIU-2-00-2-D-A
1-OIU, 2-OIX, 2-PSM-AC, 1-ACM
Optical Interface Unit (OIU) Modules Part Number OIX
Product Description Corning ONE™ Optical Interface Extender Module
OIM
Corning ONE Optical Interface Module
37HP900162-006F
OIM Harness Cable (Replacement cable only: qty 1 shipped with each OIM)
CMA-282-AEN | Page 11
Corning ONE™ Wireless Platform |
Common Interface Modules (HEU and OIU) Part Number ETM
Hardware Ordering Information
Product Description Corning ONE™ Expander Termination Module, 50 Ohm
HCM
Corning ONE Headend Controller Module
ACM
Corning ONE Auxiliary Controller Module
PSM-AC
Corning ONE Power Supply Module
PSM-DC
Corning ONE OIU Power Supply Module
ERFC59
Extender RF Cable, 59 in
ERFC40
Extender RF Cable, 40 in
ERFC34
Extender RF Cable, 34 in
ERFC24
Extender RF Cable, 24 in
ERFC16
Extender RF Cable, 16 in
Remote Access Unit (RAU) Part Number
Product Description
RAU-C85P19L70A17
Remote Access Unit supporting 700 LTE/CELL/PCS/AWS
RAU-R-C85P19L70A17-M
Remote Access Unit with RxU module
RAU-G-C85P19L70A17-E
Remote Access Unit with GEM
RAU-R-G-C85P19L70A17-ME Remote Access Unit with RxU modules and GEMs RXU-L70A17-M
CMA-282-AEN | Page 12
Remote Expansion Unit for 700 LTE/AWS MIMO support
Corning ONE™ Wireless Platform Fiber Management Unit (FMU) Part Number EDGE-01U-SP
Product Description Description Pretium EDGE® Housing, one rack unit, holds 12 Pretium EDGE Solutions modules or panels
EDGE-02U
Pretium EDGE Housing, two rack unit, holds 24 Pretium EDGE Solutions modules or panels
EDGE-04U
Pretium EDGE Housing, four rack unit, holds 48 Pretium EDGE Solutions modules or panels
ECM-UM12-18-89G
Pretium EDGE Module, 12 fiber, LC APC to MTP® APC connector, single-mode
EDGE-CS12-AF-P00RE
Pretium EDGE Splice Cassette, 12 fiber, LC duplex, single-mode APC, single-fiber
EDGE-CS12-AF-P00RJ
Pretium EDGE Splice Cassette, 12 fiber, LC duplex, single-mode APC, ribbon, straight-through
EDGE-CS12-AF
Pretium EDGE Empty Splice Cassette, 12 LC APC adapters
ED1-12M12AF-0R0000
Fiber Management Unit, loaded with one Pretium EDGE module
ED1-24M12AF-0R0000
Fiber Management Unit, loaded with two Pretium EDGE modules
ED1-48M12AF-0R0000
Fiber Management Unit, loaded with four Pretium EDGE modules
ED1-72M12AF-0R0000
Fiber Management Unit, loaded with six Pretium EDGE modules
ED1-96M12AF-0R0000
Fiber Management Unit, loaded with eight Pretium EDGE modules
ED1-E4M12AF-0R0000
Fiber Management Unit, loaded with 12 Pretium EDGE modules
ED1-12P12AF-0RH000
Fiber Management Unit, loaded with one Pretium EDGE splice cassette
ED1-24P12AF-0RH000
Fiber Management Unit, loaded with two Pretium EDGE splice cassettes
ED1-48P12AF-0RH000
Fiber Management Unit, loaded with four Pretium EDGE splice cassettes
ED1-72P12AF-0RH000
Fiber Management Unit, loaded with six Pretium EDGE splice cassettes
ED1-96P12AF-0RH000
Fiber Management Unit, loaded with eight Pretium EDGE splice cassettes
ED1-E4P12AF-0RH000
Fiber Management Unit, loaded with 12 Pretium EDGE splice cassettes
CMA-282-AEN | Page 13
Corning ONE™ Wireless Platform |
Hardware Ordering Information
Interconnect Unit (ICU) Part Number
CMA-282-AEN | Page 14
Product Description
ICU-1U
Interconnect Unit (ICU) Housing
PSM-I
ICU Power Supply Module
ICU-12-M-12-AF-0-1
ICU, one Pretium EDGE® module, one PSM-I
ICU-12-M-12-AF-0-2
ICU, one Pretium EDGE module, two PSM-I
ICU-12-M-12-AF-0-3
ICU, one Pretium EDGE module, three PSM-I
ICU-12-M-12-AF-0-4
ICU, one Pretium EDGE module, four PSM-I
ICU-24-M-12-AF-0-1
ICU, two Pretium EDGE modules, one PSM-I
ICU-24-M-12-AF-0-2
ICU, two Pretium EDGE modules, two PSM-I
ICU-24-M-12-AF-0-3
ICU, two Pretium EDGE modules, three PSM-I
ICU-24-M-12-AF-0-4
ICU, two Pretium EDGE modules, four PSM-I
ICU-12-P-12-AF-H-1
ICU, one Pretium EDGE splice module, one PSM-I
ICU-12-P-12-AF-H-2
ICU, one Pretium EDGE splice module, two PSM-I
ICU-12-P-12-AF-H-3
ICU, one Pretium EDGE splice module, three PSM-I
ICU-12-P-12-AF-H-4
ICU, one Pretium EDGE splice module, four PSM-I
ICU-24-P-12-AF-H-1
ICU, two Pretium EDGE splice modules, one PSM-I
ICU-24-P-12-AF-H-2
ICU, two Pretium EDGE splice modules, two PSM-I
ICU-24-P-12-AF-H-3
ICU, two Pretium EDGE splice modules, three PSM-I
ICU-24-P-12-AF-H-4
ICU, two Pretium EDGE splice modules, four PSM-I
Corning ONE™ Wireless Platform |
Hardware Ordering Information
Ethernet Support Units Part Number CEM
Product Description Central Ethernet Module
CEU
Central Ethernet Unit
GEM
Gigabit Ethernet Module (GEM)
GEU-S
GEM and Gigabit Ethernet Unit (GEU) – stand-alone assembly
Accessories and Cabling Part Number RAU-BRCK-MM
Product Description Remote Access Unit (RAU) Bracket for floating ceiling tile, mid-mount installation
CblTray
Cable Management Tray and Door Sleeve for HEU and OIU
FA125-00-HAP
Optical to Ethernet Termination Connector for CEU
ORF6PC
1:1 Optical Interface Module (OIM) Port Harness Cable
PCKC79
Pilot Transport Cable, single QMA to QMA cable 79 in
PCKC63
Pilot Transport Cable, single QMA to QMA cable 63 in
PCKC47
Pilot Transport Cable, single QMA to QMA cable 47 in
PCKC20
Pilot Transport Cable, single QMA to QMA cable 20 in
AK-CVT800
800 MHz Cavity Filter for Public Safety support
AK-CVT700
700 MHz Cavity Filter for Public Safety support
CMA-282-AEN | Page 15
Corning ONE™ Wireless Platform |
Cable Assemblies Ordering Information
H R 8 F- |1
|2
|7
|8
|9
|10 |11
|1
|4
|7
Select connector.
Select Cu conductor count.
Select cable type.
|5
|8
Select Cu connectors.
Select armored or non-armored.
00 = None 13 = MTP® connector, SM elite (*see Note 1) 18 = LC APC duplex 66 = SC/APC duplex
|2 Select connector.
0 = No conductors 2 = 2 conductors 4 = 4 conductors 6 = 6 conductors M = 12 conductors (*see Note 2)
13 = MTP connector, SM elite (*see Note 1) 18 = LC APC duplex 66 = SC/APC duplex
C = With connectors N = No connectors
|3
|6
Select Cu wire gauge.
Select fiber count.
0 = No copper F = 12 AWG G = 14 AWG H = 16 AWG K = 20 AWG
CMA-282-AEN | Page 16
|3 |4 |5 |6
04 = 4 fibers 06 = 6 fibers 12 = 12 fibers 24 = 24 fibers (*see Note 3) 48 = 48 fibers (*see Note 3) 72 = 72 fibers (*see Note 3) 96 = 96 fibers (*see Note 3) E4 = 144 fibers (*see Note 3) Note 1: MTP connectors are for non-composite cables only Note 2: 12 conductor cables are only for use with 12-fiber cables Note 3: Fiber-only trunk cables (no conductive pairs); MTP connector is standard – for other options, please contact Customer Care Note 4: Cable lengths: • Pre-connector CAB can only be ordered in 10 ft increments • Non-connector bulk cabling can only be ordered in 50 ft increments Note 5: Available for 24 and above fiber cables only
U = Fiber + copper conductors G = Fiber only
20 = Non-armored A3 = Armored indoor plenum
|9
Select cable length.
010-999 ft (*see Note 4)
|10 Select pulling grip.
P = One-sided pulling grip N = No pulling grip
|11 Select kit.
K = Two strain-relief trunk holders (*see Note 5) N = None
Corning ONE™ Wireless Platform Standard Cable Assemblies Corning ONE™ Wireless Platform plug-and-play (PnP) architecture within the riser trunk leverages MTP® connectors for rapid deployment and eliminates the need for field splicing. Preterminated MTP fiber cable assemblies are available in 12-, 24-, 48-, 72-, 96, and 144-fiber bundles. Corning ActiFi™ cables provide the ultimate solution for indoor remote powering of distributed antenna systems within the horizontal. The tethered cabling designs use 4-, 6-, or 12-fiber cables with four, six, or 12 copper conductors. The necessary gauge of wire (12, 14, 16, or 20 AWG) required to power the active remote equipment is determined by the cable distance and tensile strength of the cable. Corning’s preterminated PnP cabling provides a time and cost-saving solution for distributed antenna systems (DAS) installations where fiber is being leveraged within both the vertical riser and horizontal. By integrating copper and fiber in one cable, ActiFi cables eliminate the need to install separate power and fiber cables. This saves installation time, labor costs, and duct or tray space. The compact and versatile design is available in riser or interlocking armored riser for additional protection where conduit may not be feasible. Corning ONE Wireless Platform Standard Cable Assemblies
Part Number
Number of Fibers
Number of CU
AWG
Armored
HRxxxxG4x04U820xxxF-PK
4
4
14
No
HRxxxxH4x04U820xxxF-PK
4
4
16
No
HRxxxxK4x04U820xxxF-PK
4
4
20
No
HRxxxxG4x06U820xxxF-PK
6
4
14
No
HRxxxxG6x06U820xxxF-PK
6
6
14
No
HRxxxxH4x06U820xxxF-PK
6
4
16
No
HRxxxxH6x06U820xxxF-PK
6
6
16
No
HRxxxxH6x06U8A3xxxF-PK
6
6
16
Yes
HRxxxxK4x06U820xxxF-PK
6
4
20
No
HRxxxxK6x06U820xxxF-PK
6
6
20
No
HRxxxxK6x06U8A3xxxF-PK
6
6
20
Yes
HRxxxxG6x12U820xxxF-PK
12
6
14
No
HRxxxxGMx12U820xxxF-PK
12
12
14
No
HRxxxxH6x12U820xxxF-PK
12
6
16
No
HRxxxxHMx12U820xxxF-PK
12
12
16
No
Note: Standard lead times for these cable assemblies are typically two weeks; alternative cable assemblies are available, however, they are subjected to longer lead times.
CMA-282-AEN | Page 17
Preterminated for Corning ONE™ Optical Network IDF Corning ONE™ Composite Tether
Remote Access Units
HR1818HMC12820xxxF-PK
IDF
Corning ONE Fiber Trunk Remote Access Unit
HR131300N24820xxxF-PN 24 F, MTP® to MTP Connector, Plenum
Pretium EDGE® Module ECM-UM12-18-89
Corning ONE MTP Harness
37HP900162-006F
CMA-282-AEN | Page 18
MobileAccess1000/2000 Platform Overview Headend Equipment Remote End Equipment Public Safety
CMA-282-AEN | Page 19
MobileAccess1000/2000 Platform
Cabling and Hardware Solutions
MobileAccess1000/2000 Platform Overview The MobileAccess2000 (MA2000) platform provides indoor coverage for a wide range of cellular services over a single, broadband architecture. It uses a combination of fiber optic cabling and coax to deliver radio frequency signals inside buildings and/or throughout multiple buildings across campuses. The platform includes MobileAccess1000 single-carrier solutions as well. The platform includes a common headend composed of three components as well as a variety of low-, medium-, and high-power remote amplifiers to meet varying indoor and outdoor wireless requirements. MobileAccessGX (40 W, Quad-Band)
MobileAccess1000/2000 Platform
MobileAccessHX Outdoor (33 dBm, SISO)
MobileAccessHX Indoor (33 dBm, SISO/MIMO)
MobileAccessQX (14-21 dBm)
SC-450 Base Unit RIU-12 Headend
CMA-282-AEN CMA-282-AEN | Page | Page 20 20
Headend Equipment
The headend equipment receives the signals and conditions them for distribution throughout your building. A typical order will include four pieces of Corning wireless headend equipment. These include:
• SC-450 – The SC-450 system controller enables centralized remote management and control of all MobileAccess1000/2000 elements.
•
• RIU Conditioners – Available for either a BTS or BDA connection. A single conditioner is needed per service. It is a module that slides into the RIU.
•
Base Units – The base unit (BU) converts RF downlink (DL) signals received from the RIU into an optical signal. This optical signal is then transported over single-mode or multimode fiber optic cabling to/from the remote units, which are housed within IDF/telco/IT closets at the remote end locations, for distribution throughout the facility. Uplink (UL) signals from subscribers’ phones are received from the antennas and sent back to the remote units through the fiber connection to the headend, where they are converted back from RF optical to RF electrical before being passed on to the RIU. Base units are available in 4- and 8-port configurations and support 2 GHz of bandwidth for up to 2 km (1.242 miles) over single-mode fiber.
•
FT-350 – The FT-350 system extends services using multimode, single-mode or wavelength division multiplexing (WDM), and low- loss fiber cabling, transporting RF from a single BTS source to multiple remote locations in a 16 km radius.
Radio Interface Unit (RIU) – The RIU conditions the radio frequency (RF) downlink (DL) signals from an operator’s signal source base transceiver station (BTS) or bidirectional amplifier (BDA) located inside the building. The RIU then custom tunes incoming signals to ensure a constant level of RF before signals are passed to/from the base unit. The RIU is available in three versions: RIU-IM (supports up to three services), RIU-4 (supports up to four services), and the RIU- 12 (supports up to 12 services).
RIU-12
| Photo CMA502
RIU-12 Conditioner | Photo CMA505
RIU-4
| Photo CMA171
RIU-4 Conditioner | Photo CMA168
CMA-282-AEN | Page 21
Headend Equipment | (continued) Management Components Part Number
Product Description
SC-450
MobileAccess1000/2000 System Controller
Part Number
Product Description
RIU-IM
Radio Interface Unit, chassis supporting 1-3 conditioners
RIU-4
Radio Interface Unit, chassis supporting 1-4 conditioners
RIU-12
Radio Interface Unit, chassis supporting 1-12 conditioners
RIU-BTSC-700LTE
BTS/BDA LTE 700 MHz Conditioner for RIU-IM/RIU-4 chassis, 0 to +40 dBm input range
RIU-BTSC-PS700
BTS 700 MHz Public Safety Conditioner for RIU-IM/RIU-4 chassis, +10 to +36 dBm input range
RIU-BTSC-800MHz
BTS 800 MHz Conditioner for RIU-IM/RIU-4 chassis, +10 to +36 dBm input range
RIU-BTSC-CELL
BTS 850 MHz Conditioner for RIU-IM/RIU-4 chassis, +10 to +36 dBm input range
RIU-BTSC-900MHz
BTS 900 MHz Conditioner for RIU-IM/RIU-4 chassis, +10 to +36 dBm input range
RIU-BTSC-G-PCS
BTS 1900 MHz with G-block Support Conditioner for RIU-IM/RIU-4 chassis, +10 to +36 dBm input range
RIU-BTSC-AWS
BTS 2100 MHz Conditioner for RIU-IM/RIU-4 chassis, +10 to +36 dBm input range
RIU-BDAC-PS700
BDA 700 MHz Public Safety Conditioner for RIU-IM/RIU-4 chassis, -16 to +10 dBm input range
RIU-BDAC-800MHz
BDA 800 MHz Conditioner for RIU-IM/RIU-4 chassis, -16 to +10 dBm input range
RIU-BDAC-CELL
BDA 850 MHz Conditioner for RIU-IM/RIU-4 chassis, -16 to +10 dBm input range
RIU-BDAC-900MHz
BDA 900 MHz Conditioner for RIU-IM/RIU-4 chassis, -16 to +10 dBm input range
RIU-BDAC-G-PCS
BDA 1900 MHz with G-block Support Conditioner for RIU-IM/RIU-4 chassis, -16 to +10 dBm input range
RIU-BDAC-AWS
BDA 2100 MHz Conditioner for RIU-IM/RIU-4 chassis, -16 to +10 dBm input range
Headend Components
Base Unit 4
| Photo CMA049
Base Unit 8
| Photo CMA057
Note: Please check the Wireless Portal for the latest product availability and full descriptions.
SC-450 Controller | Photo CMA053
CMA-282-AEN | Page 22
Headend Equipment | (continued) Part Number
Product Description
RIU-12-CNDTR-700 LTE
BTS/BDA 700 MHz LTE Conditioner for RIU-12 chassis, 0 to +40 dBm input range
RIU-12-CNDTR-800
BTS/BDA 800 MHz ESMR Conditioner for RIU-12 chassis, 0 to +36 dBm input range
RIU-12-CNDTR-CELL
BTS/BDA 850 MHz Conditioner for RIU-12 chassis, 0 to +36 dBm input range
RIU-12-CNDTR-G-PCS
BTS/BDA 1900 MHz with G-block Support Conditioner for RIU-12 Chassis, 0 to +36 dBm input range
RIU-12-CNDTR-AWS
BTS/BDA 2100 MHz Conditioner for RIU-12 chassis, 0 to +36 dBm input range
RIU-12-TM
Modules to terminate open ports (slots) of the RIU-12; ordered separately as per the configuration; does not come with the chassis
RIU-12-CMU
Control and Management Unit for RIU-12; comes with the chassis; ordered separately only for field replacements
RIU-12-FAM
Fan Module for RIU-12; comes with the chassis; ordered separately only for field replacements Accessory Kits for RIU-IM and RIU-4
AK-RIU-IM-CNDTRCABLES
Six radio frequency (RF) Cables for RIU-IM combiner section to BTSC/BDAC; ordered only if the original cables that came with the chassis are lost
AK-RIU-4-CNDTRCABLES
Eight RF Cables for RIU-4 combiner section to BTSC/BDAC; ordered only if the original cables that came with the chassis are lost
AK-RIU4-BU-CABLES
Four QMA/N-Type RF Cables for RIU-4 to BU connections, 800 mm length; ordered separately as per requirement
AK-RIU4-OCH-CABLES
Four QMA/QMA R/A RF Cables for RIU-4 to OCH connections, 1000 mm length; ordered separately as per requirement
AK-RIU4-EXP-BU
Two QMA/QMA 1x4 splitters, two 800 mm QMA/QMA cables, 19-in tray, supports up to four additional B4Us or two B8Us on RIU-4; Four 800 mm QMA/N-type RIU to BU cables included (two DL and two UL)
AK-RIU4-EXP-OCH
Two QMA/QMA 1x4 splitters, two 800 mm QMA/QMA cables, 19-in tray, to support up to four additional OCH-4s or two OCH-8s on RIU-4; four 1000 mm QMA/QMA RIU to OCH cables included (two DL and two UL)
AK-RIU4-COMBINE
Two QMA/QMA RF Cables for combining RIU-4s, 800 mm length Accessory Kits for RIU-12
AK-RIU12-COMBINE
Two QMA/QMA RF Cables for RIU-12 combining, 150 mm length
AK-RIU12-BU-CABLES
Four QMA/N-Type RIU-12 to BU RF Cables, 1800 mm length, ordered separately; quantities determined as per requirement
AK-RIU12-OCH-CABLESFB
Four QMA/QMA RIU-12 to OCH RF Cables 1800 mm length, ordered separately; quantities determined as per requirement
AK-RIU12-EXP-BU
Two QMA/QMA 1x4 Splitters, two 800 mm QMA/QMA cables, 19-in tray, supports up to four additional B4Us or two B8Us on RIU-4; four 1800 mm QMA/N-type RIU to BU cables included (two DL and two UL)
CMA-282-AEN | Page 23
Headend Equipment | (continued) Base Unit/Optical Central Hub Part Number
Product Description
WB-B4U
Wideband Base-4 Unit, supporting four remote hub units (RHUs) over single-mode fiber, requires one DL and one UL output from radio interface unit (RIU)
WB-B8U
Wideband Base-8 Unit, supporting eight RHUs over single-mode fiber, requires two DL and two UL outputs from RIU
WBM-B4U
Wideband Base-4 Unit, supporting four RHUs over multimode fiber, requires one DL and one UL output from RIU
WBM-B8U
Wideband Base-8 Unit, supporting eight RHUs over multimode fiber, requires two DL and two UL outputs from RIU
OCH-4-WDM
Optical Central Hub (OCH) for SISO services, extended range, supporting four SISO remote units, single-mode, fiber wavelength division multiplexing (WDM)
OCH-8-WDM
OCH for SISO or MIMO services, extended range, supporting eight SISO or four MIMO remote units, single-mode fiber (WDM)
Part Number
Product Description
WB-PAU-6
Power Attenuation Unit with six broadband attenuators; comes with the fans and the control and management unit
WB-PAU-6-CMU
Control and Management Unit for PAU-6; ordered only for field replacements
WB-PAU-6-FAM
Fan Module for PAU-6; ordered only for field replacements
AK-PAU-6-RIU-CABLES
Six QMA to QMA RF Cables to interface between PAU-6 AND RIU; ordered separately; does not come with PAU-6
AK-PAU-6-WM
Brackets and Screws to mount PAU-6 chassis flush with wall; ordered separately; does not come with PAU-6
Power Attenuation Unit and Accessory Kits
CMA-282-AEN | Page 24
CMA-282-AEN | Page 24
Remote End Equipment
TSX
| Photo CMA199
Remote units are connected to headend equipment via fiber optic cabling and distribute the wireless signals to centralized locations throughout a facility. Remotes are available in multiple power options, including low (MobileAccess QSX and QX), medium (MobileAccessHX), and high power (MobileAccessGX). All of the MobileAccess1000/2000 remotes connect to the common headend equipment. Low Power
QX
| Photo CMA459
Indoor HX
| Photo CMA157
•
TSX – 20 dBm tri-band solution supports the following bands in multiple combinations: CELL, PCS, iDEN, SMR, Public Safety, AWS, 700 MHz LTE, paging, and more. A dual-band solution can be upgraded to tri-band or quad- band at any time. Available for single-carrier or neutral host deployments.
•
QSX – 20 dBm quad-band solution supporting CELL, PCS, LTE 700 and AWS services in various model-dependent combinations. Supports single-carrier and neutral host deployments.
• QX – 20 dBm compact, fully modular, quad-band solution supporting CELL, PCS, LTE 700, and AWS. Ideal for neutral host deployments and field upgradable.
Medium Power
•
MobileAccessHX – 2 W multiband, available in three versions: indoor SISO, indoor MIMO and outdoor SISO. Multiple bands include 5-band neutral- host solution (CELL+PCS+700 MHz+AWS+800 MHz), quad-band (CELL+PCS+700 MHz+AWS), and quad+ (CELL+PCS+700 MHz+AWS upgradable to 800 MHz). The MIMO unit supports MIMO for 700 MHz and AWS. HX is available in both AC- or DC-powered options. Supports single-carrier and neutral host deployments.
Outdoor HX
| Photo CMA151
CMA-282-AEN | Page 25
Remote End Equipment | (continued)
High Power GX Tri-band
| Photo CMA349
•
MobileAccessGX – 40 W (46 dBm) high-power outdoor remote. GX is a fiber-fed, multi-frequency, multioperator remote designed to complement the low- and medium-power remotes in adjacent, large open indoor or outdoor areas. GX is available in three versions: tri-band for CELL+AWS+700 MHz LTE or PCS+AWS+700 MHz LTE, and quad-band CELL+PCS+ AWS+700 MHz LTE.
Combiners GX Quad-band | Photo CMA474
SCU-4
| Photo CMA246
•
SCU – The service combiner unit (SCU) is a passive module that combines and distributes the UL and DL signals from multiple TSX and/or QSX units to the broadband antenna. The SCU is available in two versions: the SCU-4 supports four antenna output ports, four low-band services input ports and four high-band services input ports. The SCU-8 supports eight antenna output ports, eight low-band services input ports and eight high-band services input ports.
•
SCU-F/ SCU-FT – The SCU-F distributes the MA2000QX (single) output signal to (up to four) broadband antennas. A single SCU-F unit may be shared by up to three QX units. SCU-FT supports additional test ports.
Campus Solutions SCU-F
| Photo CMA458
CMA-282-AEN | Page 26
330
| Photo CMA045
•
330 – The 330 extends services over wavelength division multi- plexing (WDM) fiber optic connections from a single BTS source to additional remote locations located within a 20 km radius.
Remote End Equipment | (continued) Single-Operator MobileAccess1000 Solution Part Number
Product Description
1000-C85P19L70-A
MA1000 Tri-service Package supporting CELL, PCS, and 700 MHz LTE over single-mode fiber
1000-C85P19A17-A
MA1000 Tri-service Package supporting CELL, PCS, and AWS over single-mode fiber
1000-C85P19L70A17-A
MA1000 Quad-service Package supporting CELL, PCS, 700 MHz LTE, and AWS over single-mode fiber
1000M-C85P19A17-A
MA1000 Tri-service Package supporting CELL, PCS, and AWS, over multimode fiber
1000M-C85P19L70-A
MA1000 Tri-service Package supporting CELL, PCS, and 700 MHz LTE, over multimode fiber
1000M-C85P19L70A17-A
M1000 Quad-service Package supporting CELL, PCS, 700 MHz LTE, and AWS, over multimode fiber
1000-CELL-PCS4E-HL
Dual-band-Cell/PCS, 4 ports, enhanced output power, supports LTE and AWS add-on over single-mode fiber
1000-900MHz-FILTER
Filter Kit for SMR 900 MHz, over single-mode fiber
1000D-800-900MHz-4
Dual-band 800 MHz/900 MHz, 4 ports, over single-mode fiber
1000-800-900MHz-4F
Dual-band 800 MHz/900 MHz, 4 ports with filter kit, over single-mode fiber
1000-800-900MHz-G-PCS
MA1000 Tri-service Package supporting 800 MHz, 900 MHz and PCS with G-block, over single-mode fiber
1000-800-900MHz-G-PCSF
MA1000 Tri-service Package supporting iDEN, SMR, PCS with G-block and filter for SMR UL, over single-mode fiber
1000M-CELL-PCS4E-HL
Dual band-CELL/PCS, 4 ports, over multimode fiber
1000M-IDEN-SMR
Dual band-iDEN/SMR, 4 ports, over multimode fiber
1000M-800-900MHz-G-PCS
MA1000 Tri-service Package supporting iDEN, SMR and PCS with G-block, over multimode fiber
1000M-800-900MHz-G-PCSF
MA1000 Tri-service Package supporting iDEN, SMR, PCS with G-block and filter for SMR UL, over multimode fiber
1200-AWS-AO
Add-on Remote Unit supporting AWS service for 1000
1200-G-PCS-AO
Add-on Remote Unit supporting PCS with G-block
Part Number
Product Description
2000-C85P19-A-TC
MA2000 TSX Chassis supporting CELL and PCS with G-block.
2000-S80S90-A-TC
MA2000 TSX Chassis supporting 800 MHz and 900 MHz SMR; supports 700 MHz LTE and 700/800 MHz Public Safety coexistence
2000-C85P19L70-A-TC
MA2000 TSX Chassis supporting CELL, PCS and 700 MHz LTE. Filter (P/N 700 LTE-PS-FILTER) required for 700/800 MHz Public Safety coexistence ordered separately
2000-C85P19A17-A-TC
MA2000 TSX Chassis supporting CELL, PCS and AWS
2000-C85P19L70A17-A-TC
MA2000 QSX supporting CELL, PCS, 700 MHz LTE and AWS in a TSX enclosure
2000-C85P19L70-B-TC-F
MA2000 TSX Chassis supporting CELL, PCS and 700 MHz LTE, comes with filter to support 700/800 MHz Public Safety coexistence; easy upgradable to quad-band, no need of AK-TC-ENC-UPG-AO for upgrade
2000-C85P19L70A17-A-TCF
MA2000 QSX Quad-service CELL, PCS, 700 MHz LTE and AWS in a TSX enclosure with filter to support 700/800 MHz Public Safety coexistence
2000-A17-B-AM
QX SISO Add-on Module supporting AWS
2000-A17-B-TM
QX Port Termination Module for AWS add-on slot; comes with relevant multiband configuration part numbers
2000-C85P19A17-BQC
QX Chassis supporting CELL, PCS and AWS over single-mode fiber; comes with required termination modules
2000-C85P19A17-BQCF
QX Chassis supporting CELL, PCS and AWS over single-mode fiber; Public Safety coexistence compatible; comes with required termination modules
Single-mode Neutral Host MobileAccess2000 Solution
CMA-282-AEN | Page 27
Remote End Equipment | (continued) Single-mode Neutral Host MobileAccess2000 Solution (Continued)
CMA-282-AEN | Page 28
Part Number
Product Description
2000-C85P19-BQC
QX Chassis supporting CELL and PCS over single-mode fiber, comes with required termination modules
2000-C85P19-BQCF
QX Chassis supporting CELL and PCS over single-mode fiber, Public Safety coexistence compatible; comes with required termination modules
2000-C85P19-B-RHM
CELL and PCS SISO Remote Hub Module for QX chassis; over single-mode fiber
2000-C85P19L70A17-BQC
QX Chassis supporting CELL, PCS, AWS, and 700 LTE; over single-mode fiber
2000-C85P19L70A17BQCF
QX Chassis supporting CELL, PCS, AWS, 700 LTE; over single-mode fiber; supports Public Safety coexistence
2000-C85P19L70-BQC
QX Chassis supporting CELL, PCS, and 700 LTE; over single-mode fiber; comes with required termination modules
2000-C85P19L70-BQCF
QX Chassis supporting CELL, PCS, and 700 LTE; over single-mode fiber; supports Public Safety coexistence; comes with required termination modules
2000-L70-B-AM
QX SISO Add-on Module supporting 700 MHz LTE
2000-L70-B-AMF
QX SISO Add-on Module supporting 700 MHz LTE; configured to support Public Safety coexistence
2000-L70-B-TM
QX Port Termination Module for 700 MHz LTE add-on slot; comes with relevant multiband configuration part numbers
2000-QX-B-FAM
QX Fan Module; comes default with the QX chassis; needed only for field replacements
2000-QX-B-QC
QX Chassis without Public Safety coexistence compatibility; need to order termination modules for open slots, separately
2000-QX-B-QCF
QX Chassis with Public Safety coexistence compatibility; need to order termination modules for open slots, separately;
2000-SCU-8-4-F
8 x 4 Service Combiner Unit with all connectors in the front
2000-RC-LP
Cabinet - Local AC powering
2000-RC-RP
Cabinet - Remote DC powering
SCU-4
MA2000 Passive Service Combiner Unit supporting four antennas, four high-band and four low-band inputs. To be used with the MA2000 TSX/QSX/QX.
SCU-8
MA2000 Passive Service Combiner Unit supporting eight antennas, eight high-band and eight low-band inputs. To be used with MA2000 remotes.
1200-AWS-AO-CB
Add-on Remote Unit supporting an AWS service for 2000 cabinet
1200-AWS-AO-LT
Add-on Remote Unit supporting an AWS service for 2000 Lite
1200-G-PCS-AO-CB
Add-on Remote Unit supporting a PCS with G-block for 2000 cabinet
1200-G-PCS-AO-LT
Add-on Remote Unit supporting a PCS with G-block service for 2000 Lite
2000-ENCPS-A-TC
MA2000 700/800 MHz TSX enclosure only with supported accessories
2000-ENCST-A-TC
MA2000 TSX Enclosure only with supporting accessories
2000-CELL-PCSH
Dual-band CELL/PCS 1 port for MA2000 MRC, 20 dBm output power, supports G-block, over single-mode fiber
2000-CELL-PCSH-L
Dual-band CELL/PCS 1 port for MA2000 Lite, 20 dBm output power, supports G-block, over single-mode fiber
2000-S80S90-A-TC
MA2000 TSX supporting 800 MHz, 900 MHz SMR. Supports 700 MHz LTE and 700/800 MHz Public Safety coexistence; over single-mode fiber
2000-S80S90P19-A-TC
MA2000 TSX supporting 800 MHz, 900 MHz SMR and PCS. Supports 700 MHz LTE and 700/800 MHz Public Safety coexistence; over single-mode fiber
2000-800-900MHz
Dual-band 800/900 MHz for cabinet; over single-mode fiber
2000-800-900MHz-G-PCS
MA2000 TSX supporting 800 MHz, 900 MHz and PCS with G-block for cabinet; over single-mode fiber
Remote End Equipment | (continued) Multimode Neutral Host MobileAccess2000 Solution Part Number
Product Description
2000M-C85P19L70A17A-TCF
MA2000 QSX Quad-service CELL, PCS, 700 MHz LTE, and AWS in a TSX enclosure with filter to support 700/800 MHz Public Safety coexistence; over multimode fiber.
2000M-P71S80-A-TC
MA2000 dual-service 700 and 800 MHz Public Safety in a TSX enclosure; over multimode fiber.
2000M-PS-700-800-CB
Dual-band Public Safety 700 and 800 multimode fiber module for MA2000 MRC
2000M-S80S90-A-TC
MA2000 Dual-service 800 and 900 MHz SMR in TSX enclosure; over multimode fiber; supports 700 MHz LTE and 700/800 MHz Public Safety coexistence
2000M-S80S90P19-A-TC
MA2000 TSX TRI-service 800/900 MHz SMR and PCS with multimode fiber; supports 700 MHz LTE and 700/800 MHz Public Safety coexistence
2000M-C85P19A17-BQC
QX Chassis supporting CELL, PCS, and AWS; over multimode fiber; comes with required termination modules
2000M-C85P19A17-BQCF
QX Chassis supporting CELL, PCS, and AWS; over multimode fiber; Public Safety coexistence compatible; comes with required termination modules
2000M-C85P19-BQC
QX Chassis supporting CELL and PCS; over multimode fiber; comes with required termination modules
2000M-C85P19-BQCF
QX Chassis supporting CELL, PCS, and AWS; over multimode fiber; comes with required termination modules
2000M-C85P19-B-RHM
QX CELL and PCS SISO Remote Hub Module; multimode fiber Support
2000M-C85P19L70A17BQC
QX Chassis supporting CELL, PCS, AWS, and 700 LTE; multimode fiber support
2000M-C85P19L70A17BQCF
QX Chassis supporting CELL, PCS, AWS, and 700 LTE; over multimode fiber; Public Safety coexistence compatible
2000M-C85P19L70-BQC
QX Chassis supporting CELL, PCS, and 700 LTE; over multimode fiber; comes with required termination modules
2000M-C85P19L70-BQCF
QX Chassis supporting CELL, PCS, and 700 LTE; multimode fiber support; Public Safety coexistence compatible; comes with required termination modules
Part Number
Product Description
700LTE-AO-A-CB
Add-on supporting 700 MHz on MA2000 MRC; No 700/800 Public Safety support; can only be combined with 2000(M)-CELL-PCSE; Filter (IDEN-UL-FILTER) ordered separately if IDEN/SMR is in the same MRC
700LTE-AO-A-CB-PSF
Add-on supporting 700 MHz on MA2000 MRC; 700/800 Public Safety coexistence. can only be combined with 2000(M)-CELL-PCSE. Filter (IDEN-UL-FILTER) ordered separately if IDEN/SMR is in same MRC
700LTE-AO-A-LT
Add-on supporting 700 MHz on MA2000 Lite; No 700/800 Public Safety support; can only be combined with 2000(M)-CELL-PCSE; Filter (IDEN-UL-FILTER) ordered separately if IDEN/SMR is in the same lite
700LTE-AO-A-SCU
Add-on Kit for 700 MHz service for use in upgrade situations with MA1000 CELL/PCS RHUs (P/N 1000-CELL-PCS4E and 1000M-CELL-PCS). Includes 700 MHz SCU-700 and applicable accessories for connecting to the CELL/PCS RHU. Inquire on availability.
700LTE-AO-B-CB
Add-on supporting 700 MHz on MA2000 MRC; No 700/800 Public Safety support; can only be combined with 2000(M)-CELL-PCSH; Filter (IDEN-UL-FILTER) ordered separately if IDEN/SMR is in the same MRC
700LTE-AO-B-CB-PSF
Add-on supporting 700 MHz on MA2000 MRC; 700/800 Public Safety coexistence. can only be combined with 2000(M)-CELL-PCSH. Filter (IDEN-UL-FILTER) ordered separately if IDEN/SMR is in same MRC
700LTE-AO-B-HL
Add-on for LTE 700 MHz service with MA1000 CELL/PCS RHUs (P/N 1000(M)-CELL-PCS4E-HL)
700LTE-PS-FILTER
Cavity Filter for the 700 LTE Add-on when 700 LTE service coexists with 700/800 Public Safety service in the same MA2000 MRC or MA2000 lite. This filter is already included with the 700 LTE Add-on part numbers with a “-PSF” suffix.
700 MHz Add-on Modules and Kits
CMA-282-AEN | Page 29
Remote End Equipment | (continued) Remote Accessory Kits Part Number
Product Description
2000-AMU-A
Includes Antenna Monitoring Unit (AMU), cables to connect AMU to SCU-4/SCU-F, SCU-FT and mounting brackets; not needed with QX; SCU-4 and external power supply to be ordered separately
AK-2000-AMU-TSXBRKT-A
Includes cables to connect antenna monitoring unit (AMU) on top of TSX to SCU-4/SCU-F/SCU-FT;
AK-2000-AMU-QSXBRKT-A
Includes cables to connect antenna monitoring unit (AMU) on top of QSX to SCU-4/SCU-F/SCU-FT;
AK-2000-AMU-CBL
Includes cable to daisy-chain more than one TSX or QSX unit to antenna monitoring unit (AMU); maximum distance between TSX/QSX units cannot exceed 6U
AK-1COUPLER-NM-NF
N-Male TO N-Female Bulkhead Coupler for external test port
AK-TC-ENC-WMT
Includes contents to mount the MA2000 TSX onto the wall
AK-TC-ENC-WMT-V
Includes components to mount the MA2000 TSX onto the wall vertically. Chassis flush with the wall
AK-QX-ENC-WMT-V
QX Mounting Brackets and Screws to mount the chassis flush to the wall; ordered separately
AK-RMT-CABLES
Six RF Cables to connect RHUs/Add-ons to the QMA ports of the SCU in custom installations
AK-TC-ENC-UPG-AO
Accessories required to mount AWS AO on top of the MA2000 TSX to upgrade a TSX to QSX
AK-QSX-UPG-CBL
Monitoring Cable and Coax Jumpers for 1000 quad-service support
ANTM-600-6G-OMN
MobileAccess Wideband ant for 600-2500 CP, 5100-6000 VP
LPS-48V-100W
Local AC/DC Converter, 100 W
800MHz-UL-FILTER
Inline Filter for the IDEN/SMR RHU uplink path when IDEN/SMR service coexists with 700 LTE or 700/800 Public Safety service within the same MA2000 MRC or MA2000-Lite
BRKT-1200-STK
Bracket for stacking an RHU/800/1200 module on top of a 1200 module
BRKT-1RU-SHELF-2K
Shelf for RHU/ 800/1200 or with bracket on 2000 cabinet
BRKT-QSX-AO-STK-A
Bracket for stacking an SCU-4 on top of an add-on.
BRKT-RHU-800-STK
Bracket for stacking an RHU/800/1200 module on top of an RHU/800 module (not on top of a 1200)
CMA-282-AEN | Page 30
Remote End Equipment | (continued) Corning Mid-Power (HX)/High-Power (GX) Solutions Part Number
Product Description
HX-C85P19L70A17-AC-A
MobileAccessHX Quad-service Indoor CELL, PCS, AWS, and 700 MHz LTE solution supporting local AC power, single-mode and multimode
HX-C85P19L70A17-DC-A
MobileAccessHX Quad-service Indoor CELL, PCS, AWS, and 700 MHz LTE solution supporting remote DC power, single-mode and multimode
HX-C85P19L70A17-AC-B
MobileAccessHX Quad-service Outdoor CELL, PCS, LTE, and AWS solution supporting local AC power, single-mode and multimode
HX-C85P19L70A17-DC-B
MobileAccessHX Quad-service Outdoor CELL, PCS, LTE, and AWS solution supporting remote DC power, single-mode and multimode
HX-C85P19L70MA17MAC-A
MobileAccessHX Quad-service Indoor CELL, PCS, AWS MIMO and 700 MHz LTE MIMO solution supporting local AC power, single-mode and multimode
HX-C85P19L70MA17MDC-A
MobileAccessHX Quad-service Indoor CELL, PCS, AWS MIMO and 700 MHz LTE MIMO solution supporting remote DC power, single-mode and multimode
HX85197017U80-ACAT
MobileAccessHX Quad-band Indoor AC Unit supporting CELL, PCS, 700 LTE, and AWS; upgradable to add Sprint’s 800 MHz band; with test ports
HX85197017U80-DCAT
MobileAccessHX Quad-band Indoor DC Unit supporting CELL, PCS, 700 LTE, and AWS; upgradable to add Sprint’s 800 MHz band; with test ports
HX85197017U80-AC-B
MobileAccessHX Quad-band Outdoor AC Unit supporting CELL, PCS, 700 LTE, and AWS; upgradable to add Sprint’s 800 MHz band; without test ports
HX85197017U80-DC-B
MobileAccessHX Quad-band Outdoor DC Unit supporting CELL, PCS, 700 LTE, and AWS; upgradable to add Sprint’s 800 MHz band; without test ports
HX8085197017-AC-AT
MobileAccessHX-5-band Indoor AC Unit supporting CELL, PCS, 700 LTE, AWS and Sprint's 800 MHz; with test ports
HX8085197017-DC-AT
MobileAccessHX-5-band Indoor DC Unit supporting CELL, PCS, 700 LTE, AWS and Sprint's 800 MHz; with test ports
HX8085197017-AC-B
MobileAccessHX-5-band Outdoor AC Unit supporting CELL, PCS, 700 LTE, AWS and Sprint's 800 MHz; without test port
HX8085197017-DC-B
MobileAccessHX-5-band Outdoor DC Unit supporting CELL, PCS, 700 LTE, AWS and Sprint's 800 MHz; without test ports
HX-SCU-2x2
2x2 Combiner for HX Neutral Host
HX-SCU-4x4
4x4 Combiner for HX Neutral Host
AK-HX-SW-4B-2-5B
Accessory Kit with SW to upgrade the HX-quad-band upgradable units to add Sprint’s 800 MHz band
CMA-282-AEN | Page 31
Remote End Equipment | (continued) Corning Mid-Power (HX)/High-Power (GX) Solutions (Continued) Part Number
Product Description
AK-HX-IDEN-NTRL-HOST
iDEN Neutral Host Kit (one per TSX box) - two QMA to N-type cables
AK-HX-NTRL-HOST
Neutral Host Kit (one per HX box); SISO or MIMO
GX-C85P19L70A17-40
MobileAccessGX Quad-hardware with service CELL, PCS, AWS and 700 MHz LTE solution supporting 40 W output power - AC powering
GX-LIC-C85P19L70-40
MobileAccessGX Quad-hardware with licensed service for tri-band (CELL, PCS and 700 MHz LTE solution) supporting 40 W output power - AC powering
GX-C85P19L70A17-40-DC
MobileAccessGX Quad-hardware with service CELL, PCS, AWS and 700 MHz LTE solution supporting 40 W output power - DC powering
GX-LIC-C85P19L70-40-DC
MobileAccessGX Quad-hardware with licensed service for tri-band (CELL, PCS and 700 MHz LTE solution) supporting 40 W output power - DC powering
GX-LIC-AO-A17-40
MobileAccessGX Licensed Service Add-on for AWS solution supporting 40 W output power
GX-P19S80A17-40
MobileAccessGX Tri-service PCS, S800 and AWS solution supporting 40 W output power for AC powering
GX-P19S80A17-40-DC
MobileAccessGX Tri-service PCS, S800 and AWS solution supporting 40 W output power for DC powering
GX-C85L70A17-40
MobileAccessGX Tri-service CELL, AWS, and 700 MHz LTE solution supporting 40 W output power
GX-P19L70A17-40
MobileAccessGX Tri-service PCS, AWS, and 700 MHz LTE solution supporting 40 W output power
AK-GX-QUAD-BRKTINDOOR
MobileAccessGX Accessory Kit including bracket for wooden pole mounting option
AK-GX-QUAD-BRKTWDPOLE
MobileAccessGX Accessory Kit including bracket with ground support for indoor concrete wall-mounting option
AK-GX-FILT-850
MobileAccessGX Accessories CELL cavity external filter
AK-GX-FILT-COMB
MobileAccessGX Accessories 4-to-1 External Multiplexor – service combiner
AK-GX-ELEC-ADAPT-AC
MobileAccessGX AC Electrical Junction Adapter IP67 rated for GX Tri-service solution
AK-GX-QUAD-ELEC-ADPAC
MobileAccessGX AC Electrical Junction Adapter IP67 rated for GX Quad-service solution
Part Number
Product Description
330-MB-1
Main Building Unit supporting one link
330-MB-2
Main Building Unit supporting two links
330-RB-1
Remote Building Unit, one link supporting two base units
330-EXP-BOX
Expansion Box for remote building – supporting additional two base units
Campus Solutions
CMA-282-AEN | Page 32
Public Safety Dependability, reliability and performance. Corning’s Public Safety remotes cover the Public Safety frequency ranges and provide an exceptionally low noise figure which reduces any interference transmitted to a BDA/BTS thus ensuring optimum performance. All remotes are available in an optional weatherproof IP65 enclosure and can be managed locally or remotely via a simple graphical user interface (GUI). Corning 2000 Public Safety Solution Part Number
Product Description
1500-UHF-BU-1
Base Unit, 421-512 MHz supporting one remote unit
1500-UHF-BU-2
Base Unit, 421-512 MHz supporting two remote units
1500-UHF-RU
Remote Unit, 421-512 MHz
2000-P71S80-A-TC
MA2000 TSX Dual-service 700/800 MHz Public Safety
2000-P71S80P19-A-TC
MA2000 TSX Tri-service 700/800 MHz Public Safety and PCS
2000-PS-700-800-CB
Dual-band Public Safety 700/800 Module for MA2000 MRC, inquire on availability
2000-PS-700-800-LT
Dual-band Public Safety 700/800 Module for MA2000-Lite
CMA-282-AEN | Page 33
Optimize Deployments with Advanced Cabling Solutions Leverage advanced cabling to reduce distributed antenna system (DAS) installation time by up to 70 percent. Corning offers complete end-to-end solutions for DAS, meeting current and future requirements with the flexibility of fiber. Corning advanced cabling solutions provide industry-leading, bendable fiber optics as well as a variety of connection options, including: Fusion splicing – Flexible fit for any facility with bulk cable for fusion splicing Stubbed hardware – Eliminates splicing costs and labor at remotes with factory-tested stubbing Plug & Play™ Solutions – Eliminates all splicing and installation time; factory tested from end-to-end Line powering – Offers performance assurance with cost-effective power redundancy
Line Powering
Plug & Play™ Systems
Stubbed Hardware
Fusion Splice
Fusion Splice
CMA-282-AEN | Page 34
• Bulk cable for fusion splicing
• Fiber only, composite, plenum, riser, armored and non-armored
Stubbed Hardware • Eliminates splicing at remote • Factory-tested connectors
• Rack- and wall-mount options
Plug & Play Solutions • Eliminates all splicing reducing installation time by 90 percent • End-to-end factory tested
Line Powering • Provides power redundancy
• Available in fusion splice, stubbed and Plug & Play Solutions leading configurations
Fiber Optic Cables Part Number
Product Description
012E88-33131-29
MIC® Plenum Cable, 12 fiber, non-armored
024E88-33131-29
MIC Plenum Cable, 24 fiber, non-armored
024EC8-14101-20
Ribbon Plenum Cable, 24 fiber, non-armored
048EC8-14101-20
Ribbon Plenum Cable, 48 fiber, non-armored
096EC8-14101-20
Ribbon Plenum Cable, 96 fiber, non-armored
144EC8-14101-20
Ribbon Plenum Cable, 144 fiber, non-armored
216EC8-14101-20
Ribbon Plenum Cable, 216 fiber, non-armored
006UT8-41H01M20
ActiFi™ 4 Conductor, 6 fiber, 16 AWG, non-armored
012UT8-M1H01M20
ActiFi 12 Conductor, 12 fiber, 16 AWG, non-armored
012UD8-M1G01M20
ActiFi 12 Conductor, 12 fiber, 14 AWG, non-armored
MIC Non-armored Cable | Photo LAN4604
Note: Additional options available.
ActiFi Non-armored Cable | Photo CAR317
Ribbon Plenum Non-armored Cable | Photo CAB023
CMA-282-AEN | Page 35
Fiber Jumpers/Cable Assemblies Part Number
Product Description
186602G5120006F
2 fiber, LC APC to SC APC, riser rated, 6 ft, Corning® ClearCurve® XB single-mode
186602G5120012F 2 fiber, LC APC to SC APC, riser rated, 12 ft, ClearCurve XB single-mode 186602G5120024F single-mode
2 fiber, LC APC to SC APC, riser rated, 24 ft, ClearCurve XB
SC APC to SC APC | Photo CRR609
666602G5120006F 2 fiber, SC APC to SC APC, riser rated, 6 ft, ClearCurve XB single-mode Note: Additional options available.
SC APC to LC APC | Photo CMA606
CMA-282-AEN | Page 36
Pigtailed Hardware Part Number
Product Description
PW212P12-6C-3RH1D0 Wall-mount Pigtailed Housing, 12 fiber, SC APC, MIC® cable pigtail PW212P12-6C-3RHDAS
Wall-mount Pigtailed Housing, 12 fiber, SC APC, MIC cable pigtail, cu terminal panel
PW224P12-6C-3RH2D0
Wall-mount Pigtailed Housing, 24 fiber, SC APC, MIC cable pigtail
PW224P24-B3-3RJDAS
Wall-mount Pigtailed Housing, 24 fiber, LC APC, ribbon pigtail, cu terminal panel
PR112P12-6C-3RH1D0
Rack-mount Pigtailed Housing, 12 fiber, SC APC, MIC cable pigtail
PR112P12-6C-3RHDAS
Rack-mount Pigtailed Housing, 12 fiber, SC APC, MIC cable pigtail, cu terminal panel
PR124P12-6C-3RH2D0
Rack-mount Pigtailed Housing, 24 fiber, SC APC, MIC cable pigtail
PR124P24-B3-3RJDAS
Rack-mount Pigtailed Housing, 24 fiber, LC APC, ribbon pigtail, cu terminal panel
Rack-mount (288 Fiber) | Photo CMA299
Rack-mount (12 or 24 Fiber) | Photo CMA277
Wall-mount Pigtailed Housing (12 or 24 Fiber) | Photo CMA265
CMA-282-AEN | Page 37
Splice Housings and Accessories Part Number
OSE Cabinet Wall-mount Splice Housing | Photo FOH138
Product Description
CSH-03U-F
Splice Housing, 3 rack units, accepts up to seven 0.4-in splice trays, 42 ribbon splices or 336 single-fiber splices
CSH-05U-F
Splice Housing, 5 rack units, accepts up to 14 0.4-in splice trays, 84 ribbon splices, 672 single-fiber splices
WSH-11SPT-F
Wall-mount Splice Housing, accepts up to 11 0.4-in splice trays, 66 ribbon splices, 528 single-fiber splices
OSE-A288-03
Optical Splice Enclosure (OSE) Universal, 1008 fiber mass-fusion capacity, wall- and rack-mount bracket
SCF-ST-077 RBN-TERM-KIT-FMS A0402799
Splice Tray (0.4-in) for up to six mass fusion splices or 48 single-fiber splices Fiber Ribbon Branch-out Kit Watertight Cable Connector, strain-relief
Stubbed Hardware CSH-05U-F
| Photo LAN1995
Stubbed hardware eliminates splicing at each remote. Use the codes in Table A to select the length from headend to remote for each unit. Table A – Stub Length Code
Stub Housing (12 F) | Photo CMA281
Wall-mount Stub Housing (24 F)
CMA-282-AEN | Page 38
| Photo CMA260
16 31 46 61 77 92 A7 C2 D8 F3 G8 J3 K9 M4 N9 Q4 S0 T5 V0 W5
Actual Length m (ft)
Code
Actual Length m (ft)
16 (50) 31 (100) 46 (150) 61 (200) 77 (250) 92 (300) 107 (350) 122 (400) 138 (450) 153 (500) 168 (550) 183 (600) 199 (650) 214 (700) 229 (750) 244 (800) 260 (850) 275 (900) 290 (950) 305 (1000)
Y1 Z6 AC AD AF AG AJ AK AM AN AQ AR AT AU AW AX AZ BA BC BD
321 (1050) 336 (1100) 360 (1150) 370 (1200) 390 (1250) 400 (1300) 420 (1350) 430 (1400) 450 (1450) 460 (1500) 480 (1550) 490 (1600) 510 (1650) 520 (1700) 540 (1750) 550 (1800) 570 (1850) 580 (1900) 600 (1950) 610 (2000)
Stubbed Hardware (continued) Part Number
Product Description
PR112xx126C-88001B
Rack-mount Stub Housing, 12 fiber, xx ft, SC APC, MIC® plenum cable, non-armored
PR112xx126C-D8MDAS
Rack-mount Stub Housing, 12 fiber, xx ft, SC APC, 14 AWG, 12 cu, non-armored
PR112xx126C-D8MDA3
Rack-mount Stub Housing, 12 fiber, xx ft, SC APC, 14 AWG, 12 cu, armored
PR112xx126C-T8MDAS
Rack-mount Stub Housing, 12 fiber, xx ft, SC APC, 16 AWG, 12 cu, non-armored
PR112xx126C-T8MDA3
Rack-mount Stub Housing, 12 fiber, xx ft, SC APC, 16 AWG, 12 cu, armored
PR124xx126C-88001B
Rack-mount Stub Housing, 24 fiber, xx ft, SC APC, MIC plenum cable, non-armored
Notes: “xx” denotes stub length in ft. See Table A on page 37. Additional options available.
CMA-282-AEN | Page 39
OptiTap® Drop Solutions for MobileAccessGX
Plug & Play™ Solutions eliminates splicing at both the headend and remote locations, reducing installation time and installation cost. Table B – OptiTap® Drop Cable Assembly Length
CMA-282-AEN | Page 40
Code
Length
0-999 ft
0-199 ft
A00
1000 ft
A50
1050 ft
B00
1100 ft
B50
C00
C50
D00
D50
E00
E50
F00
1500 ft
F50
1550 ft
G00
1600 ft
G50
1650 ft
H00
1700 ft
H50
1750 ft
K00
1800 ft
K50
1850 ft
L00
1900 ft
L50
1950 ft
M00
2000 ft
OptiTap Connector, SST-Drop Cable | Photo COP230
Part Number 004301EB4FRxxxF
OptiTap Drop Assembly, 1 fiber, OptiTap connector to pigtail, single-mode, xxx ft
434301EB4FRxxxF
OptiTap to OptiTap Connector
434401EB4R2xxxF 1150 ft 434401UB4H3xxxF 1200 ft 1250 ft 1300 ft CC1-24OTR-24B3H 1350 ft 1400 ft MTB-O644FD025FW-P 1450 ft
Product Description
OptiTap Drop Assembly, 1 fiber, OptiTap connector to SC APC, single-mode, xxx ft OptiTap drop assembly, 1 fiber, OptiTap connector to SC APC, single-mode, xxx ft, riser rated Integrated 1U, 24 fiber, OptiTip® connector (pinned) to LC APC OptiSheath® Multiport Terminal with OptiTip cable assembly, SST-Drop™ single-tube, gel-filled cable with multifiber cable assembly, 6 port, bulk packaging, single-mode (OS2), 25 ft
MOB-O644FD025FW-P OptiSheath Multiport Terminal, SST-Drop single-tube, gel-filled cable, stubbed, 6 port, bulk packaging, single-mode (OS2), 25 ft SPH-12OTR-126CH
AnyLAN™ Integrated Single-Panel Housing, 12 fiber, bottom-mounted OptiTip adapter, front-mounted SC APC duplex adapters, single-mode (OS2)
M1M112EBZD1X075F-P Multifiber Direct Trunk
OptiTap Connector to SC APC | Photo PIM0499
SPH-012TR-126CH | Photo LAN1573
Pigtailed Homerun (Fiber Only) Fusion splice in this connector housing Up to 288 fibers
Fusion splice in this connector housing Up to 48 fibers in a non-composite configuration
PR124P24B3-3RJDAS PR4U8P24B3-3RJ6L0
Pigtailed with Intermediate Splice Point (Fiber Only) Fusion splice in this connector housing Up to 288 fibers
Fusion splice in this connector housing Up to 48 fibers in a non-composite configuration
PR124P24B3-3RJDAS PR4U8P24B3-3RJ6L0
CSH-03U-F
Fusion splice in this splice housing Up to 504 fibers in 3U PR124P24B3-3RJDAS
Fusion splice in this connector housing Up to 48 fibers in a non-composite configuration CMA-282-AEN | Page 41
Stubbed Homerun (Composite/Line Power) Fusion splice in this connector housing Up to 288 fibers
PR124XX24B3-D8MDAS 24 F, LC APC, 12 cu, 14 AWG
PR4U8P24B3-3RJ6L0
No Fusion Splicing
Stubbed with Intermediate Splice Point (Composite/Line Power) Fusion splice in this connector housing Up to 288 fibers
No fusion splicing
PR124XX24B3-D8MDAS 24 F, LC APC, 12 cu, 14 AWG PR4U8P24B3-3RJ6L0
CSH-03U-F
Fusion splice in this splice housing Up to 504 fibers in 3U PR124XX24B3-D8MDAS 24 F, LC APC, 12 cu, 14 AWG
No fusion splicing
CMA-282-AEN | Page 42
OptiTap® Drop Solution for MobileAccessGX (continued)
434301EB4FRxxxF
GX Remote
MultiPort at breakout location
MDF
MTB-0644FD025FW-P
CC124OTR-24B3H
Hybrid Drop, SC APC to OptiTap® connector
CMA-282-AEN | Page 43
Services
Corning brings 160 years of experience supporting our customer ecosystem in highly competitive and global technology marketplaces to the wireless industry. We understand the importance and impact of reliable wireless coverage and applications availability. Corning's team of RF engineers and project managers work closely together with you to deliver value-added services like site planning, network integration, and capacity build-up from start to finish. Service offerings include:
• Project management
• Installation support
• Commissioning and optimization support
• Extended warranty
Detailed statements of work are available for each of these service offerings. Please contact your Corning representative to order services.
CMA-282-AEN | Page 44
Corning ONE™ Wireless Platform in the 360 Environment
Experience a city completely wireless-enabled. From healthcare campuses, stadium environments, airports, hospitality, and education environments, Corning has made wireless accessible anywhere for everyone. Learn more by visiting www.ONEWirelessPlatform.com today.
CMA-282-AEN | Page 45
Notes
CMA-282-AEN | Page 46
Notes
CMA-282-AEN | Page 47
Reference Information Corning Optical Communications Wireless, Inc. 13221 Woodland Park Road Suite 400 Herndon, Virginia 20171 USA Phone: 866-436-9266 Technical Support Hotline: 410-553-2086 or 800-787-1266 Website: www.corning.com/opcomm Total DAS Environment Website: www.totalDAS360.com Portal: https://corning.secure.force.com/opcomm/global/cma/login
Corning Optical Communications Wireless, Inc. • 13221 Woodland Park Road, Suite 400 • Herndon, Virginia 20171 USA 866-436-9266 • FAX: 703-848-0280 • Tech Support Hotline: 410-553-2086 or 800-787-1266 • www.corning.com/opcomm Corning Optical Communications Wireless reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications Wireless products without prior notification. A complete listing of the trademarks of Corning Optical Communications Wireless is available at www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications Wireless is ISO 9001 certified. © 2014 Corning Optical Communications. All rights reserved. Published in the USA. CMA-282-AEN / September 2014
