Transcript
Wireless Solutions WL-PRG-UNV-200
PeerAir™ Wireless PRG Projector Mount For projectors up to 50lb (22kg)
Wireless Full HD 1080p and 3D Streaming Cable-free high-definition and passive 3D signal streaming up to 131' (40m) through floors, walls and ceilings
Set It and Forget It Patent-pending precision gear technology lets you set the projector image alignment and forget it, will not shift even during projector maintenance
Features
PIN-POINT IMAGE ALIGNMENT Patent-pending precision gears provides exact projector image alignment
■ Includes everything needed to mount and stream wireless Full HD 1080p and passive 3D content to the mounted projector through walls, floors or ceilings ■ For projectors up to 50lb ■ Patent-pending precision gears provides exact projector image alignment ■ Two adjustment knobs control projector image alignment
UNIVERSAL COMPATIBILITY Spider® Universal Adaptor Plate extends up to 17.63" (448mm) to fit most projector models
■ Pre-assembled design reduces installation time ■ Spider Universal Adapter Plate extends up to 17.63" (448mm) to fit most projector models
Includes everything needed to quickly and easily stream wireless content to the projector without the need to run signal cables
Accommodate up to 360ºof installation possibilities
Provides an ultra sleek wireless content delivery system with no long and expensive cable runs
PeerAir™ Wireless Precision Gear Projector Mount is the pioneer in delivering patentedpending precision gear technology with Full HD 1080p and passive 3D content streaming without the need for costly drilling and pulling of signal cables through walls, floors or ceilings. Featuring pin-point precision projector alignment that will not budge, even during projector maintenance and high-definition wireless content streaming or game play, this wireless projector mounting solution is the easiest and most efficient way to deliver Full HD 3D content to any projector without the need to run signal cables.
CLICK: peerair.peerless-av.com
■ Tilt ± 20°, Roll ± 10°, Swivel 360° mounted on extension column ±15° when flush mounted on ceilings - for ideal image positioning ■ Pre-installed security screws provide optional tilt and roll lock to prevent tampering with adjustment knobs ■ Includes two 1.6" (0.5m) HDMI cables for clean, fast and easy connectivity ■ Includes IR Extender for enhanced remote control of AV components ■ Release mechanism to easily service components ■ Quick and easy installation and plug-and-play wireless set-up
CALL: 800.865.2112
FAX: 800.359.6500
Wireless Solutions WL-PRG-UNV-200
PeerAir™ Wireless PRG Projector Mount for projectors up to 50lb (22kg)
Product Specifications Part Number
WL-PRG-UNV-200
Wireless Range
131ft (40m)
Product Weight
6.05lb (2.74kg)
Max Load
50lb (22kg)
Video Input (Transmitter)
2 x HDMI up to 1080p (60Hz), 1920x1080 1 x Composite 1 x YPbPr Component
Universal Mounting Pattern
Up to 17.638" (448 mm)
Tilt
±20°
Video Output (Receiver)
1 x HDMI up to 1080p (60Hz), 1920x1080 1 x Composite 1 x YPbPr Component
Roll
360° (±15° when flush mounted)
Audio
2 Ch. Linear PCM, Analog, 48kHz 16-bit ADC
Finish
Scratch resistant fused epoxy
Audio Input
1 x 3.5mm Audio Jack (Transmitter)
Color
Black
Audio Output
1 x 3.5mm Audio Jack (Receiver)
Mounting Surfaces
Wood joist, concrete and other structures (Other structures require accessory)
WiFi Frequency
5.15-5.25GHz
Latency
< 30ms
Power
Voltage 120 VAC, Consumption: 12V 2A
Package Specifications PACKAGE SIZE (L x W x H)
HDS-PRG-UNV-200
PACKAGE SHIP WEIGHT
17.250" x 15.880" x 7.000" (438.15 x 403.35 x 177.8mm)
9.80lb (4.45kg)
PAcKAGE UPC CODE
PACKAGE CONTENTS
UNITS IN PACKAGE
· Projector Mount · Wireless mount module · Wireless Transmitter with stand · Wireless Receiver · Remote control · 2 x 12V 2A power supply · IR Flasher · IR Extender · 15-Pin D-Sub to RCA female component video breakout cable · 2 x 1.5ft (0.5m) HDMI cable · Mounting hardware · Instruction manual
735029292845
1
Accessories ACC, CMJ Models: Ceiling Plates
PWA-14(S)(W): Projector Wall Arm
AEC, EXT Models: Extension Columns
EX Models: Ceiling/Wall Extension Kits
DE-HD0075B: Delta 2.5ft (.75m) High Speed HDMI Cable with Ethernet
DE-HD01B: Delta 3ft (1m) High Speed HDMI Cable with Ethernet
HDS200-R: HD FlowTM Pro Wireless Multimedia Receiver
EC-HD015F: 1.5ft (.5m) High Speed HDMI Cable with Ethernet
EC-HD025F: 2.5ft (.75m) High Speed HDMI Cable with Ethernet
HDS-ASE: Wireless Tx/Rx Security Enclosure for use with HD Flow and HD Flow Pro Models
EC-HD03F: 3ft (1m) High Speed HDMI Cable with Ethernet
HDS-IRE: IR Extender for use with HDS200-R
All dimensions = inch (mm)
5.83" (148mm)
7.63" (194mm)
5.60" (142mm) MIN 6.32" (160mm) MAX
3.81" (97mm) MIN 4.81" (122mm) MAX
Front VIeW
SIde VIeW
ISometrIC VIeW
A R C H IT E CT S S P E C I F I CAT I O N S The Wireless PRG Projector Mount shall be a Peerless-AV model WL-PRG-UNV-200 and shall be located where indicated on the plans. Assembly and installation shall be done according to instructions provided by the manufacturer. Peerless-AV 2300 White Oak Circle Aurora, IL 60502 (800) 865-2112 (630) 375-5100 Fax: (800) 359-6500 peerless-av.com peerair.peerless-av.com Visit peerless-av.com to see the complete line of AV solutions from Peerless-AV, including wireless devices, interactive devices, flat panel mounts, projector mounts, carts/stands, furniture, cables, screen cleaners and a full assortment of accessories.
© 2012 Peerless Industries, Inc. All rights reserved. Peerless-AV® is a registered trademark and PeerAirTM is trademark of Peerless Industries, Inc. HD Flow™ is a trademark of I Do It, LTD. Other parties’ marks are the property of their respective owners.
LIT-0783 rev.1
