Transcript
Radi-Fire
Wireless systems from Channel Safety Systems
Radi-Fire Wireless systems Radi-Fire provides a complete fire detection system without the need for a cabled connection between the field devices and control panel. Based on well proven components the sensors, sounders, beacons and call points give Radi-Fire a highly reliable foundation into which the wireless technology has been integrated to provide a fully featured analogue addressable fire detection and alarm system powered by low cost AA batteries. The development of Radi-Fire has tracked the progress of the European standard EN54-25: Fire detection and fire alarm systems and components using radio links; all elements of this wireless system have been designed to conform fully with all aspects. Features • • • • • • •
Addressable 250 device system Range greater than 1Km in free air Low profile aesthetics European tones, fully synchronised Dual anti-tamper function Meets the requirements of EN54-25 Future expandable - voice / other system
Typical Applications Radi-Fire is suitable for an array of applications, including the following; • • • • • • • • • • • • • •
Schools Hospitals No go areas for cabling Temporary systems Building sites, Site-cabins Temporary structures Frequent re-configuration Flexible offices Small shops Display areas Difficult cable routes Areas with difficult or limited access Areas where disruption is unacceptable
Control Panel Fully featured analogue addressable fire control panel with bi-directional communication to all devices and designed to comply with all aspects of European standards EN54-25.
Features • • • • • • • •
250 radio devices per panel 16 indicated detection zones Large LCD for clear indication of status and programming Comprehensive panel with input/output facilities Full bi-directional radio communication Full cause & effect programmability RS232 port (download upload facility) Fully networkable (up to 127 panels per network)
SPECIFICATIONS Supply
230Vac 50Hz (nom)
Batteries
24V 4Ah
Technology
Unique custom radio module
Radio Frequency
868Mhz
Radio Devices
Up to 250 detection and alarm devices per panel
Outputs (wired)
2 x Sounders circuits (1.5A total load) Auxiliary relay (24V 1A max load) RS 232,485 serial port
Displays
Back lit touch screen display (120mm x 90mm) 16 x Zonal LEDs 8 x System status LEDs
IP Rating
IP30
Weight
4Kg without batteries, 9Kg with batteries
2 | revision 013-1
Product Dimensions
Arials Dimensions
Height 375mm Width 357mm Depth 95mm
Height 85mm Width 85mm
PRODUCT CODE F/CHRFA/16Z F/CHRFA/16Z/NC
DESCRIPTION 16 zone wireless fire alarm control panel includes 24v 4Ah battery and antennas Network card for 16 zone wireless fire alarm control panel
www.channelsafety.co.uk 0845 884 7000
@
[email protected]
Multi Criteria Detector Radi-Fire detectors are based on multi-sensor technologies using combinations of optical smoke detection, both fixed temperature and rate of rise heat detection. These elements can be selected to provide optimum detection of all types of fire and operating conditions.
Features • • • • •
Multi-sensor technology combining optical smoke detection and to configure heat detection (fixed, R-O-R and high temperature) Tamper alarm First fix base Concealed antennas
Product Dimensions • •
Depth 78mm Diameter 114mm
SPECIFICATIONS
PRODUCT CODE F/CHRFA/SHD
DESCRIPTION Multi criteria detector complete with base
Voltage
4.5V (3 x AA Lithium Batteries)
Temperature
- 10°C to + 55°C
IP Rating
IP21C
Weight
0.3Kg
Multi Criteria Detector Sounder Indicator Radi-Fire detectors are based on multi-sensor technologies using combinations of optical smoke detection and both fixed temperature and rate of rise heat detection. These elements can be selected to provide optimum detection of all types of fire and operating conditions.
Features • • • • • •
Multi-sensor technology combining optical smoke detection and to configure heat detection (fixed, R-O-R and high temperature) Tamper alarm First fix base Concealed antennas Highly visible led alarm visual indicator Alarm sounder
Product Dimensions • •
Depth 78mm Diameter 114mm
SPECIFICATIONS
PRODUCT CODE F/CHRFA/SHD/WB/BN
3 | revision 013-1
DESCRIPTION Multi criteria sounder indicator complete with base
Voltage
4.5V (3 x AA Lithium Batteries)
Sound Output
90dB(A)
Tones
3
Light Output
1Cd
Flash Rate
1Hz
Volume Control
By panel - 3 levels
Temperature
- 10°C to + 55°C
IP Rating
IP21C
Weight
0.3Kg
www.channelsafety.co.uk 0845 884 7000
@
[email protected]
Manual Call Point Radi-Fire Manual Call Points share all the features of the Universal CX on which they are based. In addition a tamper switch is provided so that an alarm is transmitted to the Radi-Fire Control Panel if the call point is dismantled or removed.
Features • • • •
Reassurance LED Glass or plastic re-settable element (both provided) Tamper alarm Concealed antennas
Product Dimensions • • •
Height 87mm Width 87mm Depth 57mm
SPECIFICATIONS Voltage
4.5V (3 x AA Lithium Batteries)
Element Type
Glass / Plastic (re-settable)
Temperature
-10˚C to + 55˚C
IP Rating
IP24D
Weight
50g
PRODUCT CODE F/CHRFA/BG
DESCRIPTION Break glass unit
Open Area Sounder Indicator The Radi-Fire Open Area Sounder Indicator is based on the Symphoni AV to provide a combined audible and visual alarm to suit applications
Features • • • • •
100dB(A) sounder Integrated highly efficient LED indicator Tamper alarm 3 volume settings Fully networkable (up to 127 panels per network)
Product Dimensions • •
Depth 91mm Diameter 105mm
SPECIFICATIONS Voltage
4.5V (3 x AA Lithium Batteries)
Sound Output
100dB(A)
Tones
3
Light Output
1Cd
Flash Rate
1Hz
Volume Control
By panel - 3 levels
Temperature
- 10°C to + 55°C
IP Rating
IP21C
Weight
600g
4 | revision 013-1
PRODUCT CODE F/CHRFA/WB/BN
DESCRIPTION Open area sounder indicator
www.channelsafety.co.uk 0845 884 7000
@
[email protected]
I/O Module The input/output (I/O) module provides the facility to monitor 3 independent inputs for fault and fire as well as providing the facility to operate 3 volt free contacts for operating devices such as magnetic door holders, in areas where the installation of system wiring is not an option. The unit is fully monitored and controlled by Radi-Fire Control Panel. Both inputs and outputs are available from the same unit and may be operated.
Features • • • •
SPECIFICATIONS
Product Dimensions Height 225mm Width 180mm Depth 63mm
PRODUCT CODE F/CHRFA/IO
Concealed antennas 3 inputs Duplex technology (2 way communication) 3 volt free outputs
DESCRIPTION Wireless fire alarm input/output module
Voltage
4.5V (3 x AA Lithium Batteries)
Radio Frequency
868MHz
Radio Devices
28
Temperature
- 10°C to +55°C
Temperature
- 10°C to + 55°C
IP Rating
IP21C
Weight
0.9Kg
Signal Booster The Radi-Fire Signal Booster allows devices outside the range of the Radi-Fire control panel to be addressed, monitored and controlled by the panel. Each Radi-Fire Booster operates its own dedicated wireless system on a different system ID and frequency from the main control panel. Up to 8 boosters can be commissioned onto the Radi-Fire control panel.
Features • • • • • •
Fully addressable Concealed antennas Duplex technology (2 way communication) Mains powered and battery backed Up to 8 boosters per control panel Up to 28 Radi-fire devices per booster
SPECIFICATIONS
Product Dimensions Height 331mm Width 270mm Depth 90mm PRODUCT CODE F/CHRFA/SB
5 | revision 013-1
DESCRIPTION Wireless fire alarm signal booster includes 12V 4Ah battery
Voltage
230Vac 50Hz (nom)
Batteries
12V 3.2Ah
Radio Frequency
868MHz
Radio Devices
28
Temperature
- 10°C to + 55°C
IP Rating
IP21C
Weight
2.1Kg without batteries, 3.5Kg with batteries
www.channelsafety.co.uk 0845 884 7000
@
[email protected]
USB Interface The analogue systems panel interface (USBINT2) is a universal serial bus converter that provides conversions from RS232 to USB, TTL to USB or TTL to RS232. These options provide the connectivity required between a PC and intelligent addressable control panels, wireless control panels, and wireless survey tools.
Features • • • •
Intelligent addressable control panel to PC site installer connection using the RS232 to USB configuration Wireless control panel to PC site installer connection using the RS232 to USB configuration Wireless control panel to PC wireless live monitor connection using the TTL to USB/RS232 configurations Wireless survey tool to PC survey tool connection using the TTL to USB/RS232 configurations
Benefits • •
Simple PC driver installation Simple DIP switch configuration
PRODUCT CODE F/CHRFA/CABLE
DESCRIPTION USB interface cable
Survey Kit The Radi-Fire wireless survey kit is an essential tool for evaluating a site’s suitability for a Radi-Fire wireless system prior to installation. The Radi-Fire wireless survey tool achieves this by using a thorough scan (on all available frequencies) to detect any interference or other wireless systems close to the site, as well as a survey (on all available frequencies) to check the signal quality between the panel location and the desired location of each individual remote device. These results provide the unit with all the information it requires to calculate the optimum frequency for the site. This tool is also essential for establishing if the installation site requires any Radi-Fire wireless booster panels.
Features • • • • • • • • •
Comes complete with 3 x Standard AA batteries Duplex technology (2 way communication) Simple menu driven Interface Site scan for detecting interference and other wireless systems Site survey for checking signal quality before system installation Survey analysis to identify the best frequency channel Device commissioning Database containing site, can site survey and provide commissioning data Upload/download database to/from a PC or Laptop SPECIFICATIONS Batteries
3 x AA Lithium (4.5 V) 3000 mAhr (min)
Wireless Frequency
868 MHz
Product Dimensions
Visual
Graphical LCD display, Green “GO” LED, Red “NO GO” LED
Audible
Internal buzzer
Height 176mm Width 100mm Depth 39mm
Keyboard
5 button keyboard
Weight
0.35kg
6 | revision 013-1
PRODUCT CODE F/CHRFA/SK
DESCRIPTION Survey kit
www.channelsafety.co.uk 0845 884 7000
@
[email protected]
