Transcript
B
Complete the registration process using the following steps: 1. Enter registration number included on the letter in the self-installation kit. 2. When asked if this is your number, press OK.
Registration / Enregistrement Enter number/ Enrer le numéro:
3. You will see a “successful” message followed by an automatic reboot, which will take 2-3 minutes.
1
2
3
4
Enter number and press OK / Enrer le numéro et appuyer sur OK:
fter the successful reboot you will automatically be taken A to LIVE TV (Channel 2 - FibreOP TV Help). Enter 1234 when prompted for password.
5
LINK
Returning the OLD Wireless TV Receiver
POWER
Gather up the OLD Receiver and its power cord.
RECORD MENU
OK
WIRELESS TV RECEIVER
Place them in the box in which you received your self-installation package. Attach the return label. Take the return kit to your nearest Canada Post outlet. Take note of the tracking number.
SELF-INSTALLATION GUIDE
IMPORTANT! If the Receiver is not returned within 30 days of the receipt of your new Receiver, a Receiver loss fee of $300 will be charged to your account.
6
HD
Personalizing your NEW Wireless TV Receiver
You are about to install our most advanced wireless receiver enabling you to move your TV anywhere.
Customize your Receiver, press Menu > Settings on your remote and select:
Installation will take approximately 25 minutes.
a. Screen aspect ratio and high definition
b. Favorite Channels
You can use your existing FibreOP remote with your new Wireless TV Receiver.
c. Language preference
d. Parental Controls
At any point in the installation, you can view our helpful video at bellaliant.net/repair. Watch each step on it’s own or the full video in only five minutes.
To learn how to re-establish your personalized settings, refer to your FibreOP Welcome Guide or go to bellaliant.net/welcomeguide
Let’s get started...
If at any point you receive an error message, start over and repeat the steps. If you are still having trouble, visit bellaliant.net/repair to watch videos and read Q&A’s or contact our help desk at 1 866 342-7367. Important legal information regarding your Wireless Receiver: Additional fee(s) may apply. Wireless from the Video Access Point to the Wireless Receiver; power outlet and separate connection of Wireless Receiver to TV is required. For residential use in a single household only. Limit of five wireless receivers per household. Actual range of wireless signal will vary and may be limited by several factors including, but not limited to, electromagnetic interference, home construction material, obstructions, and other environmental factors.
CONTVRECEX0415
Need Troubleshooting or Help?
1 A
3
Removing the OLD Receiver
Unregister your OLD Receiver by going to Menu > Settings > General > Unregister Receiver using the FibreOP TV remote.
TV
9:47 PM
Recorded TV
On Demand
Apps
Help
Settings
Menu
Settings
1:50 PM
Settings
NETWORK
Television
Guide
General
System sound effects
Favourite Channels
Television
On-screen language
Search
Audio
System information
Parental controls
RF output channel
Restart System
Manage pairings
Audio
A
B
The Receiver will take 2-3 minutes to reboot. You will then see Client Registration appear on the screen. Your de-registration is now complete; please disconnect your old receiver.
C
A
Wait at least FOUR (4) minutes before the next step. This will allow the Video Access Point to be fully initialized.
OPTICAL
HDMI
POWER +12V DC
No cables should be connected to the network port on the back of the Wireless TV Receiver.
Connect the Wireless TV Receiver to your TV using your existing cables.
Set your TV to the proper input screen choosing the option that matches your cables. For example, if you plugged the cable into HDMI 1 port on the TV, select this as the input. After about a minute, additional on screen instructions will appear on your TV. If you have trouble, visit our support article on this topic at www.bellaliant.net/inputsource.
2
12345678912345
4 A
Pairing the Wireless TV Receiver
You will need to follow instructions as they appear on these screens. In Step 2, ensure you hold the OK button for at least two seconds.
1
2
3
4
ETHERNET
POWER +12V DC
ON
Plug the Wireless Video Access Point (VAP) into a working electrical outlet using the VAP power cord. Ensure the power light is illuminated green on the front of the Wireless Video Access point.
L R AUDIO OUT
RESET
Connect the Wireless Video Access Point (VAP) to your existing FibreOP Modem using the Ethernet cable included in the box. Use any available port. To reduce the possibility of wireless interference, place as much distance as possible between the VAP and modem.
Note: If the power light does not illuminate ensure the power switch is on (the switch is either on the front or back).
C
Cancel / Annulation
1
John Doe 12345678912345 No/Non
Enter number / Entrer le numéro
OFF
B
Unregister / Annuler l’enregistrement? Name / Nom Number / Numéro Master PVR / RVP principal?
Connecting Wireless Video Access Point (VAP) to modem
Note: Your modem is close to where FibreOP comes into your home and is usually located in the basement or garage.
VIDEO OUT
Unregister / Annuler l’enregistrement
If you are a new Wireless TV customer go to Step 2. If you are already a Wireless TV customer adding a new receiver go to Step 3.
2
Pr
Plug power cord from the Wireless Receiver into an electrical outlet and it will power up automatically. If you skipped Step 2 because you already have a Wireless TV Receiver, go to your Video Access Point (VAP) and reboot it by turning the power off and then back on.
Unregister receiver
Enter the number as shown on your TV screen to confirm that you want to unregister your Receiver. Press OK.
Pb
Parental controls
Rename receiver
B
Y
Wireless TV Receiver (Back)
9:30 PM
General
IMPORTANT!
X
Note: If you can’t access the menu that means your receiver is already unregistered. Please disconnect your old receiver and continue to 1C. Menu
Installing Wireless TV Receiver
Video Access Point (Back)
FibreOP Modem (Back)
IMPORTANT! If you do not have an open Ethernet port on your existing FibreOP Wireless Modem (Actiontec R1000H), go to bellaliant.net/repair for additional instructions and be sure to leave existing cables plugged in. Equipment may not be exactly as shown.
Client Registration
Press OK to start Client Registration
